And there’s still more in the tank.
The Chevrolet Corvette Stingray C8 has been hailed as a performance bargain since it first arrived on the scene, but if you’re saving money on the cost of a car, that just means you have more money left over to make it even faster and better. For some, that can even include altering its appearance for a more exotic look. But while some prefer technical circuit racing, where the C8 excels too, the most popular form of motorsport in America is arguably drag racing. We know that a standard C8 with 495 horsepower and 470 lb-ft of torque can clock a 10-second quarter-mile, but now someone has made it into the nines.
Extreme Turbo Systems, a company famous for mind-blowingly powerful Nissan GTRs, has just set a new record for the C8, achieving a time of 9.95 seconds at 144 mph. Naturally, this required some extensive modifications, with the ETS C8 receiving new Mahle pistons Ferrea and valves, Mickey Thompson drag radial tires, a bespoke intercooler with an ice box, and direct port methanol injection. As imperative as these mods are, it’s the addition of Precision turbochargers with 46 millimeter wastegates that truly elevates the ETS C8 to a new level.
With 13 psi of boost, this Stingray produces 872 hp. 18 psi generates 980 horses, and then 20 psi gets the team into quadruple digits with an astonishing 1,021 hp. That’s more than double what the car comes with in stock form.
But as any racing enthusiast will tell you, a dyno run does not prove that your car is fast. Thus, ETS headed to Woodburn Dragstrip to lay down some rubber, and despite battling some launch control and transmission issues, achieved some incredible figures. At 11 psi, a time of 10.49 seconds was achieved at 141 mph. Turned up to 13.5 psi, the C8 managed 10.05 at 145 mph. Being that close to the single digits with no breakages, it only makes sense to turn it up again. Interestingly, although the team achieved 9.95 at 144 mph, this was done with just 15 psi, meaning less than 980 hp. Assuming that transmission and launch issues can be resolved and more power put down, this car may achieve mid-nine-second passes very soon.
We’ve been expecting to hear this news and finally today it has been confirmed by Chevrolet that the new 2020 Corvette Stingray will be the official Pace Car of the 104th Indianapolis 500. This marks the 17th race that Corvette has served as the official Pace Car, and the 31st Chevrolet to lead the field.
This year’s running of the Indy 500 will take place on Sunday, August 23 with the race being shown live on NBC.
With no fans allowed in attendance this year due to the COVID-19 pandemic, the official pace car driver will be GM President Mark Reuss.
“It’s truly an honor to have the opportunity to be behind the wheel of the mid-engine Corvette Pace Car at such a historic race as the Indy 500,” said GM President Mark Reuss. “The 2020 Corvette Stingray is the result of a close collaboration between the Corvette Racing and production engineering teams, setting a new benchmark for supercars around the world.”
The 2020 Corvette Stingray Pace Car is Torch Red and features the high Wing Spoiler and ground effects package. The Z51 Coupe will also wear the 104th Indy 500 livery on the doors. The new 2020 Stingray is capable of accelerating from 0-60 in 2.9 seconds and has a top speed of 194 mph, so it should have no trouble in setting the pace for the IndyCar racers.
“This is a continuation of our outstanding partnership with Chevrolet,” Indianapolis Motor Speedway President J. Douglas Boles said. “We’re so grateful for all that Chevrolet has contributed to the success of our events. The Torch Red 2020 Corvette Stingray is a world-class machine rich with speed, performance and excitement, perfectly suited to pace the ‘500′ field.”
Chevrolet has been linked to the Indianapolis Motor Speedway with both entities founded in 1911. Company founder and namesake Louis Chevrolet and his brothers Arthur and Gaston raced in the early 500-mile races with Gaston winning the race in 1920. Today, Louis Chevrolet rests in peace in a local Indianapolis cemetery just 15 minutes away from the track.
This afternoon we came across this Facebook post from Corvette Exterior Design Manager Kirk Bennion sharing these words from fellow GM designer Adam Barry who led the project. The 2020 Corvette Pace Car features a number of items from Genuine Corvette Accessories as discussed:
Indianapolis Motor Speedway
Many gearheads have a strange affinity to Hot Wheels. Here is everything you’ve ever wanted to know about the company, but never asked.
Toy cars can be divided into two categories: Hot Wheels and everybody else. For over 50 years, Mattel has dominated with what is now recognized as the best-selling toy in the world. It’s impossible to count how many car buffs, from mechanics to real race stars to TV personalities, grew up playing with these cars. Whether it was just a few models or massive collections, Hot Wheels has been part of car culture for decades and is never going to stop. Whether it’s a simple model or some fancy licensed vehicle, Hot Wheels simply enthralls.
Yet it’s incredible how some people are unaware of the facts of the company and its history. From its unique origins to how these cars are put together, the story behind Hot Wheels is fascinating. There are also touches from how some of these cars are more expensive than real ones to some unique touches on the culture. Here are 20 amazing facts about Hot Wheels to prove they’re more than just “kids toys.”‘
20/20 Real-Life Hot Wheels Jump Was A World Record
Growing up a massive Hot Wheels fan, racer Tanner Foust decided to honor them in a fun way. At the 2011 Indy 500, Foust talked the management into seeing up a massive orange ramp and raced down it in a rally car.
After 90 feet of track, Foust sailed 332 feet, the longest record for such a move. He topped it by driving through a 66-foot loop in 2012 to live out the dreams of every kid.
19 Technology In Car Building Is Amazing…
Making toys has become a very high-tech business today. Just like real car companies, Hot Wheels has adapted to the 21st century nicely. Computers and 3-D technology are utilized to make sure the designs are perfected before the building begins.
It also helps them keep on top of the latest car trends to ensure that today’s Hot Wheels are sleeker and more natural than the ones of the past.
18 But They’re Still Diecast
There are many toy car lines out there, but Hot Wheels is still the king of the bunch. The key reason is that, for all the advances in technology, every car is still diecast and built mostly by hand.
Even when cheaper materials are available, Mattel knows the diecast is what the fans want. It’s also helped in making customized cars at home for popular models. After 50 years, Mattel doesn’t want to mess with success and do away with diecast.
17 They’ve Worked With NASA
Hot Wheels have done a few astronaut-themed toys over the years. But that’s not the only connection they have with NASA. In 1998, they were able to work with the agency to create an exact replica of the Mars Rover, which landed on the Red Planet that very year.
They also worked with them in 2012 for scale models of the Curiosity rover. It’s amazing how the company got access to top-secret plans to make these toys.
16 Collectors Take It Seriously
Some may dismiss Hot Wheels as “just for kids.” But collectors take it more seriously than real automobiles. The 1969 Volkswagen Beach Bomb (only 16 prototypes were made) is known to go for at least $15,000.
Some rare models can go for a hundred grand, and collectors are always on the lookout for unique mint models. Entire museums are devoted to various cars as some Hot Wheels collections put legit car collectors to shame.
15 Scaling Down The Cars Was Tricky
A key to the company’s success is that they work with scores of real car companies to get looks at plans for their toy models. Yet it’s not so simple as just “make a smaller version.” The biggest challenge is to achieve the proper scale for the toys in a diecast model yet retain the details of the actual car.
That can be complex with some fancy vehicles. That every model has to be sized to fit the same tracks just adds to why it takes as long developing a toy car as a real one.
14 NASCAR Star Has The Record For The Longest Track
Ever since the Hot Wheels tracks were created, fans have been trying to top themselves making the most extended and most complex. A few have achieved great ones, but it’s fitting a NASCAR star holds the record for the longest.
In 2019, Joey Logano unveiled a 1,941-foot long track stretched across his garage. It weaves through his car collection with 1222 boosters before ending in Logano’s own 2018 HW Ford Mustang. Add yet another title to Logano’s list of accolades.
13 They Made A Car Coated In Diamonds
In 2008, Mattel made a big deal of celebrating the 40th anniversary of the Hot Wheels line. As a special reward, Mattel had Jasons of Beverly Hills craft the most expensive Hot Wheels car on the planet.
Cast in 18-karat gold, it’s covered with 2700 diamonds and gems totaling nearly $150,000 today. It’s become a rotating exhibit at toy museums for the glitziest Hot Wheels you could see.
12 The Darth Car Is A Speed Machine
While they do stick to toys, the company has been busy creating some real-sized cars for collectors. One of the most notable is based on Darth Vader, with the hood looking like his fearsome helmet and in jet black.
This isn’t just for show as it’s based on a C5 Corvette with a GM LS3 V-8 engine capable of 526 hp and 150 mph. The Dark Lord of the Sith would be proud of this powerful craft.
11 Every Car Is Tested To Make Sure It Can Run A Track
Almost from the beginning, Hot Wheels car fans had to have a track with the cars. They’ve gone from straight lines to elaborate roller-coaster-like loop systems to leave kids entertained for hours.
What few realize is that the track determines if a car makes it as Mattel prides itself on “every car can fit every track.” More than once, a prototype has to be altered when it won’t fit as the track decides a car’s final form.
10 There Are More Hot Wheels Cars Than Real Cars
While it’s tricky to figure out for sure, most sources agree there are at least one billion cars on the planet (give or take a few hundred thousand in auto graveyards). In contrast, since 1968, six billion Hot Wheels cars have been created.
True, many have been trashed and/or recycled, and it’s impossible to count how many have been lost in backyards. But given how 16 cars are produced every second, it’s no shock the toys outnumber the real deals.
9 Several Creators Are Legit Car Designers
The one constant of Hot Wheels is that the cars look just as good as the real deal. There’s an excellent reason for that as scores of the manufacturers are legitimate car designers. Larry Wood was a veteran of Ford before becoming one of the first Hot Wheels designers.
He’s not alone as Jack Ryan was a rocket designer who crafted the bearings that made the cars so great. Scores of the car designers were in real automobiles first, so it’s no wonder the vehicles look so good.
8 The Original Camaro Is Worth A Fortune
Mint conditions of the Original 16 Hot Wheels releases are all pretty collectible items. But one dominates from the pack. While versions of a Camaro were produced, a few had white enamel paint.
They had been meant to discover flaws in a prototype but accidentally released. A mint version of one went for a hundred thousand dollars and made this one of the most expensive toys on the planet
7 They Released A Custom Corvette Before GM Did
An early standout for the company at a custom Corvette in 1968. What made it notable was that the toy was released before GM had their actual Corvette in car dealerships.
The fact designer Harry Bradley had worked at GM indicates he may have “borrowed” the designs before he left to allow Mattel to beat GM to releasing a Corvette to the masses.
6 The Red Stripes Are Expensive
If you find what looks like an old Hot Wheels car, take a good look at the wheels. If they have red stripes, then you’ve just found a fantastic collector’s item. From 1968 to 1977, designers hand-painted red lines onto the wheels to make the cars look distinctive.
As a cost-cutting measure, they switched to all-black wheels in 1978. Some mint condition red-striped vehicles have been known to go for thousands online.
5 One Of The Original Cars Was Based On A Car With No Doors
The first wave of Hot Wheels was just 16 cars, and any of them can be valuable today. One is notable, the 1965 Dodge Deora. This car boasted no doors but rather a hatch for folks to crawl into.
It was based on a fun design used by Mike and Larry Alexander but in an irony, no real Dodge Deoras were built, to make this a truly unique model
4 A Tie-In Cartoon Got Pulled By The FCC
Today, cartoons based on toy lines are commonplace. But in 1969, Hot Wheels got in trouble when they put out a cartoon series about some teenage car drivers. Despite good messages, the show was hit by complaints about being a “half-hour commercial.”
The FCC agreed, and it was yanked off the air. The company was just ahead of their time with a cartoon tie-in for a hit toy line.
3 There’s A Fight On Where The Name Came From
Much of Hot Wheels is shrouded in myth, and that includes just where the name comes from. The familiar story is that when Eliot Handler saw the first models from designer Fred Adickes, he remarked: “those are some hot wheels you’ve got there.”
Another version is that Handler just blurted the name out in a meeting with a designer. Regardless, it just stuck to become one of the most popular toys on the planet.
2 They’re Number One…Because They Remain So Cheap
In the ranks of the most popular toys on the planet, Hot Wheels dominates. They’re not just the biggest toy vehicle sellers but also the number one selling toy in the entire world. The reason is that in many markets, the cars can still go for only a dollar each.
True, they can be put out in packs, and some nations charging a few bucks more. But many stores do sell the cars for less than a bottle of water, which is the reason they are so dominant.
1 Its Creator Was Married To Barbie’s Creator
Elliott and Ruth Handler were the First Couple of the toy world. The two had founded Mattel as a picture frame company in 1945. While making a dollhouse, Ruth decided to craft a series of dolls she named Barbie.
It was an instant hit to make Mattel a success. Elliott then realized how a toy car line could be great for boys to craft what would become Hot Wheels. The two remained together until Ruth’s death in 2002 (Elliott passed on nine years later) to be icons of their industry.
Sources: Mentalfloss.com, hotwheels.com, hotwheelsmedia.com, thrillist.com
Both cars retail for about $81,000, but one is a lot more accessible.
SPEED PHENOM ON YOUTUBE
If you’ve got $80,000 to spend and want an American high-performance car, now’s a pretty good time to be in the market. In addition to tire-shredding stalwarts like the Camaro ZL1 and Challenger Hellcat, Ford and Chevy have recently launched high-profile, track-ready sports cars. And thanks to a new video by Speed Phenom, we now know how they directly compare on track.
Naturally, we wanted to do this comparison ourselves. But the GT500 wasn’t ready during our Performance Car of the Year competition when we had an early C8 to test. And now that both cars are on sale, stay-at-home orders and track closures mean we’ll have to wait for an opportunity to do a full R&T comparison.
In the meantime, Speed Phenom does a good job of breaking down how they perform. With the caveat that he’s got a base model GT500 without the optional Pilot Sport Cup 2 tires, he notes that the car struggles for grip more often than the similarly-tired Corvette. It’s also less composed through mid-corner bumps, with slower cornering all around. Thanks to its massive horsepower advantage, though, it jets through straightaways.
The C8, meanwhile, benefits from serious mechanical grip. The better-balanced midship car fires through corners and has no problem putting its power down. That makes it more approachable, not surprising given that it’s the tamest version of the C8 while the GT500 is stretching the limits of the S550 platform. We’re sure to see more track-ready Corvettes soon, but for now the Stingray is a surprisingly capable start.
Mack Hogan- Road&Track
Even off the pavement, the new ‘Vette is a rocket ship.
The 2020 C8 Chevy Corvette is a fast car. In base form, it can hit a staggering 194 mph flat-out. Even with the drag-inducing Z51 performance package, the car can still do 184. Hennessey Performance took theirs to 182 mph with ease before they turbocharged it to oblivion. Now, there’s another C8 top-speed run on the internet, and this time, it takes place on a dry lake bed.
Popular YouTube TheStradman took his new Z51-equipped Corvette to a dry lake bed in Utah to test out the top speed of the car. He managed to hit an impressive 173 mph before slowing down—not bad considering the uneven and bumpy surface. It helps that there’s absolutely nothing for miles in either direction. In fact, from inside the cabin, it looks a bit uneventful. Here’s a perspective from outside the car to give you a sense of how fast 173 mph is:
If the base Corvette is this quick right out of the box, we’re curious to see how the upcoming Z06 stacks up. Considering the last-gen car could hit 200 mph, we’re expecting big things.
Source: Brian Silvestro; for RoadandTrack
The Goldilocks zone of Corvette C8 interiors?
By now, you should know that Chevrolet has started deliveries of the mid-engine 2020 Corvette. Lucky owners of the ‘Vette C8 are starting to receive their newest toy and most likely you’ve already seen one on the streets – that’s if the state you’re in is not affected by the coronavirus lockdown.
If you’re among those who are planning to purchase the new Corvette but are undecided with the trim level to choose, this video might be able to help you – especially if you’re particular with a car’s interior.
The Corvette C8 comes with three trim levels: 1LT, 2LT, and 3LT. The differences lie mainly in the features offered on each trim level, which defines that the cabin will look and feel like. That’s pretty important, considering that we spend so much time inside the car rather than staring at our investment from a distance. So, here’s a little guide.
The base 1LT trim isn’t really basic. With the entry-level trim, you already get the GT1 seats wrapped in mulan leather, a customizable 12-inch gauge cluster, push-button ignition and keyless entry, and an 8-inch Chevy MyLink infotainment system with Apple CarPlay and Android Auto, 4G LTE Wi-Fi, and 10-speaker Bose sound system. The Corvette 1LT trim is available in three color options: black, gray, or red.
Going up the 2LT trim gives you more interior color options plus features like a rearview camera mirror, a colored head-up display, heated/cooled seats, heated steering wheel, advanced blind-spot monitor, and rear cross-traffic warning. The infotainment gets upgraded as well with a wireless charger and a 14-speaker Boss audio system.
Finally, the 3LT trim dials up the ante by adding a premium Nappa leather with suede microfiber accents – all in combination with the GT2 seats that have more bolsters. These seem not a lot but the range-topping trim adds luxury to the sports coupe.
If you’re still undecided, watch the 2LT interior review on top of this page to check whether you need to take it down a notch to 1LT or go all out on the top-level 3LT.
Source: HorsePower Obsessed
It took 30 hours for Hennessey Performance Engineering to tear apart a new 2020 Chevrolet Corvette, install twin-turbo setup, and put it back together.
It’s no surprise, then, that the twin-turbo C8 Corvette isn’t ready to be sold to customers. The engine lacks intercoolers and Hennessey hasn’t cracked the code of GM’s new electrical architecture to reprogram the ECU.
“This is just the beginning, our own car, doing R&D,” company founder and CEO John Hennessey told Motor Authority.
On Monday, the engine made 643 horsepower and 570 pound-feet of torque at the wheels on a Dynojet dyno while running just 5 psi of boost. That compares to baseline testing HPE performed on the stock car which revealed 466 hp and 451 lb-ft of torque. HPE plans to offer a 1,200-hp version of the C8, which Hennessey said could make 18-20 psi of boost.
Hennessey took delivery of an orange C8 Corvette in Detroit on March 13. He and his daughter, Emma, drove back to the performance outfitter’s Texas headquarters and performed baseline testing before the Hennessey team tore apart the car.
The orange C8 fired back to life on Friday with twin 62-mm Precision Turbos and twin blow-off valves connected to the throttle body mounted behind the catalytic converters. Both turbos are oil-cooled with twin scavenge pumps that feed back into the motor.
The system is not intercooled. Instead, there’s a methanol injection setup to keep things from getting too hot. HPE is considering where to put intercoolers. The current packaging has limited space for intercoolers without cutting into trunk space, which Hennessey does not want to do. 2020 Chevrolet Corvette Stingray undergoes twin-turbo conversion at Hennessey
Hennessey told Motor Authority his team currently can’t tune the factory ECU, but it is looking at aftermarket solutions for the engine management system. He noted it took a year for solutions to come to market for the C7 and added, “hopefully, it won’t take a year.”
Hennessey said when the turbocharged C8 was first started it didn’t throw any codes, errors, or a check engine light. “The computer seems happy with the turbos,” Hennessey noted. A check engine light did appear when the front wheel speed sensors were disconnected to put the car on the dyno, Hennessey said.
The orange C8 will used for R&D of upcoming modifications. Hennessey said he doesn’t expect to deliver modified customer C8s for at least six months, and all will have intercoolers and full plumbing.
Joel Feder for Motor Authority
Did you see the two race on YouTube? We’ve tested them, too; here’s why the results were no surprise.
- We have tested both the 2020 Chevrolet Corvette (11.2 seconds at 122 mph) and the 2020 Ford Mustang Shelby GT500 (11.4 seconds at 132 mph) in the quarter-mile.
- A video on YouTube, however, shows flipped results: 11.5 seconds at 120 mph for the Corvette and 10.8 seconds at 132 mph for the GT500.
- As always, the driver and track conditions are critical, and our two-run average is far more repeatable than any one-off run at a drag strip.
When we tested Ford’s new 2020 Mustang Shelby GT500 against the top-dog 2020 Chevrolet Camaro ZL1 1LE, the Mustang came out on top on the drag strip. But how does the front-engine Shelby stack up against the other, now mid-engine, threat from Chevy?
Greg PajoCar and Driver
During our testing, the GT500 hurtled through the quarter-mile in 11.4 seconds at 132 mph. But that was on a regular street-like surface, not a sticky, prepped drag strip. We struggled mightily with traction at launch, and our best run was with the launch control set to the lowest rpm allowed (1200 rpm) to prevent igniting a rear-tire fire. However, no surprise: with more traction far, better numbers are possible, and we’ve seen numbers below 11 seconds at drag strips, including this kid, who ran a 10.665 shortly after he acquired the car.’Murica Which Ultimate Pony Car Is the 1/4-Mile King?This Kid Ran a 10.66 Quarter Mile In His GT500
On the other hand, the 2020 Corvette has far fewer launch struggles, as it benefits from its newly acquired mid-engine layout and rear weight bias. Moving the weight distribution rearward improves launch traction, helping it jump off the line much quicker. During our testing, and despite far less horsepower, the mid-engine Vette outaccelerated the GT500 through the quarter-mile by two tenths of a second, reaching it in 11.2 seconds at 122 mph.Advertisement – Continue Reading Below
We’re starting to see other people’s numbers from both of these cars, though, as customers are starting to take deliveries of their C8 Corvettes and GT500s. Contrary to our test results, there’s a video circulating on YouTube that shows the new GT500 beating the C8 Corvette through the quarter-mile by seven-tenths of a second. It raced to the quarter-mile in 10.8 seconds while the Corvette reached it in 11.5 seconds.
Keep in mind that the driver and conditions are huge factors in quarter-mile and acceleration results. We suspect that here, the Corvette likely got bogged down on the high-grip surface, as the launch control isn’t optimized for those conditions, and the 760-hp Mustang benefited from the extra traction on the track.
Connor Hoffman for CarandDriver
With the highest performance versions of the seventh generation Corvette, customers were forced to make a choice. Did they want their car to have the highest possible top speed, or did they want to sacrifice some of that by bolting a slew of aerodynamic aids to their car for maximum cornering ability?
We would love for Chevrolet to take that decision out of the ordering equation for buyers of the upcoming Z models and the Grand Sport. They could give buyers the best of both worlds with the incorporation of Active Aerodynamics.
Active Aerodynamics can take many forms, from grille vents that close at high speeds to streamline a car, to suspension that lowers at speed to reduce lift. We know that the Corvette team would build a fully functional system that integrates several of these technologies into a cohesive package, just like they did on the C7 ZR1’s chassis-mounted wing and innovative balancing front underwing, but what we mostly want to focus on here is the most visible piece of such a system, the rear wing.
This unit would elevate both the performance and even the prestige of GM’s looming halo car. There are several benefits of an active rear wing that accompany their off-the-charts cool factor.
1. An active rear wing can be lowered, causing it, for all intents and purposes, to disappear, along with any drag that it was creating. Top-end General Motors Products have become so fast that the most track-worthy editions have suffered at the dragstrip because of massive fixed wings. The effects of the C7 Z06/Z07’s wickerbill spoiler have been well documented. Chevrolet officially listed the top speed of ZR1’s with the “big-wing” ZTK package as 10 MPH lower than their stock counterparts, and the Camaro ZL1 with the 1LE package has proven slower than the car it is based on, even in distances as short as a quarter-mile. Allowing these serious track performers to retract their wing, and the ZTK/Z07/1LE models become the best version of their respective model-line with no excuses or asterisks, which is what buyers that dole out more funds expect.
Photo Credit: https://www.sciencelearn.org.nz
2. Just as these wings can retract to reduce drag and improve top speed, they can be “actively” placed in full “attack mode” for maximum downforce in the corners. This increases cornering speed, stability, and driver confidence which can lead to drastically lower lap times.
3. Upon hard braking, an active wing can also go vertical, transforming into an air brake. This assists the actual brakes, resulting in shorter stopping distances. It also keeps more weight in the rear of the car, again helping with stability and, especially in a rear-wheel drive car, improved corner exit speeds.
Photo Credit: Car Magazine (UK)
All three of these traits brought to the table by an active wing radically assist the driver and make the car faster in all aspects. The coolest thing is that, with the right programming, the wing does all three automatically with seamless transitions, and, did we mention how awesome they also look?
There has been speculation about Active Aero coming to the Corvette for several years now. These rumors were fueled by GM’s own patent filings which showed a sketch of a C7 fitted with advanced aerodynamic trickery. We think the top dog mid-engine offerings are the perfect place for the General to finally deploy this technology that can already be found on the majority of the world’s supercars.
If you’re going to tick option boxes, then these are the ones to concentrate on.
The C8 Corvette is finally in production, which means people can start getting excited about their orders. The new Chevrolet Corvette comes well-stocked from the factory before you hit the options list, and the mid-mounted 6.2-liter V8 engine with a dry-sump oil system making 490 hp and 465 lb-ft of torque is just the beginning. It also comes with an 8-speed dual-clutch transmission, a limited-slip rear differential, Brembo brakes, a 10-speaker Bose sound system, 8-way power seats, keyless entry, and remote start, and a starting price of $59,995.
That’s one hell of a lot of car for five bucks shy of $60,000, and we would not turn our nose up at a base model. A lot of people are going to tick options though, so for those that are going to go beyond the base model goodness, these are the must-haves, and how we would go about speccing out a C8 Corvette.
1. 2LT Package
If you want more creature comforts for daily driving duties, the 2LT Package adds heated and ventilated seats, a head-up display, wireless phone charging, memory seats, upgraded digital rear-view mirror, forward-facing camera, power-folding mirrors, blind-spot monitoring, and rear-cross-traffic alert. For track days, it also includes a performance data recorder. It adds $7,300 to the price, but if it’s not going to be stored in the garage for weekends, this is the way to go.
The 3LT trim adds even more luxury to the Corvette but also pushes it over the $70,000 price point before anything else is added.
2. Z51 Performance Package
Whether you want the added convenience of the 2LT Package or not, any enthusiast will want the performance package for $5,000. It adds a performance exhaust, electronic limited-slip differential, a different rear axle ratio, upgraded Brembo brakes, improved engine cooling, front brake cooling inlets, Z51-specific front splitter and rear spoiler, and Michelin Pilot Sport 4S tires.
It also adds an extra spoonful of power, taking the 490 hp and 465 lb-ft of torque up to 495 hp and 470 lb-ft of torque. However, that’s purely from the performance exhaust which can be added without the Z51 package for $1,195.
Let’s face it, everyone and their neighbors will be ordering their C8 Corvette with red, white, yellow, or black paint. Which is a shame as there are some seriously cool colors available. We are partial to the Zeus Bronze Metallic, but we know that’s not going to be bold enough for many. Thankfully, the Elkhart Lake Blue Metallic is available and looks stunning. Rapid Blue is the lighter shade, but the darker hue of the Elkhart Lake Blue is sophisticated, accentuates the lines of the Corvette’s bodywork, and with the black accents, gives it a little extra menace without being too dark.
4. Visible Carbon Fiber
This is an easy way to ramp up the price of the C8 Corvette, so the key is to be judicious here. The $2,095 Visible Carbon Fiber grille insert is a bit much, as is the $1,145 carbon-fiber door mirror option. However, we would go for the visible carbon-fiber roof panel with a body-color surround that is not just lightweight, but can also be stored away in the rear trunk. For $3,495, you could go with the Carbon-Fiber Dual Roof Package that includes a transparent roof panel. That’s what we would opt for if the climate where you live doesn’t provide for long warm summers.
5. High Wing Spoiler
You don’t have to spec the High Wing Spoiler in Carbon Flash Metallic, but it’s the only way to get it with some paint schemes and will replace the Z51 spoiler if the package is added already. How much difference to the aerodynamics the higher spoiler makes isn’t clear, but it gives the C8 Corvette a different look. If you don’t want the optional spoiler in Carbon Flash metallic, then your paint is limited to Arctic White, Black, Shadow Gray Metallic, and Torch Red.
6. Engine Appearance Package
It’s frivolous and costs $995, but the carbon-fiber closeout panels on each side of the engine and LED lighting illuminating the engine compartment is a nice touch for the mid-engined sports car. You can get engine covers with different color accents, but in plain black with the bare carbon-fiber being lit up keeps things tasteful when looking through the rear window.C
7. Upgraded Seats
If you’re reading this and want a C8 Corvette, you’re probably planning on driving hard. They’re expensive at $1,995, but the Competition Sport Bucket Seats increase lateral support when cornering at speed on the track, and the high-wear areas are bolstered with harder wearing textiles.
The less hardcore option is the GT2 bucket seats, which look cool, but are more about comfort than holding you in place. For around the same price as the Competition Sport Bucket Seats, you can also get the GT2 seats in two-tone with Sky Cool Gray, Adrenaline Red, and Natural seat colors.
8. Carbon-Fiber Interior Trim
Carbon-fiber trim is played out on cars that don’t deserve it, but we think the C8 Corvette is worthy. The carbon-fiber material replaces the plastic black that holds the instrument cluster with a carbon-fiber frame. It also adds carbon-fiber to the center console below the infotainment screen and to the door switch plates. It’s costly at $1,500, but we think its a must-have if you’re splashing out on the new Corvette.
The $1,495 Trident Spoke wheels with their Y-shaped elements are going to be a popular box to tick in one of the two finishes available, but we also like the more low-key but stylish 5-open-spoke Carbon Flash-painted aluminum wheels. The Carbon Flash takes the shine off the wheels and helps keep the Corvette looking sleek. A lot of people will be going after-market, but this is a great option for staying stock. There’s no option for size, though, and all styles and colors are for the staggered setup featuring 19-inch wheels on the front and 20-inch discs on the back.
10. Corvette Museum Delivery
Buying a new car, let alone a new Corvette, is not something people often do. That’s why we like the idea of the National Corvette Museum delivery program. You can take a few days and go to Bowling Green, Kentucky, where your car is built and take a tour of the museum where your Corvette will be displayed. Then you’ll have a delivery presentation, followed by a drive-off ceremony. As you road trip home, you’ll be able to admire the personalized interior plaque on the dashboard with your name, VIN, and the NCM logo engraved upon it.
We knew by the time we loaded one up it would get much more expensive than the $59,995 entry level, and optioned out with everything we talk about here, you’re looking at $83,610 before delivery.
Ian Wright CarBuzz
Zora’s dream of bringing a mid-engine Corvette to market has finally been fulfilled!
Chevrolet is celebrating the Start of Regular Production (SORP) of the 2020 Corvette Stingray today and they shared this photo of a Black mid-engine Coupe on the Corvette assembly line in Bowling Green, KY.
The car is the VIN 001 Corvette that was purchased by Rick Hendrick for $3 million last month at Barrett-Jackson. Chevrolet told us previously that the first mid-engine Corvette produced for customers would be a Black Coupe with the Z51 package.
Here is Chevrolet’s tweet celebrating the start of C8 production from this afternoon:
Chevrolet is saying that initial vehicle shipments to dealers are expected to begin in late February or early March.
Congratulations to all those who worked on the new Corvette to get it to this point and we are excited for all of our friends that have a new C8 Corvette on order. The new Corvette Stingray is a grand slam home run for Chevy and from it, we will see a paradigm shift in how people will view mid-engine sports cars in the future.
And with VIN 001 coming of the Corvette assembly line today, that future is now!
Chevrolet also offered up this trailer for a documentary of the C8 Corvette’s development called Revolution:
[UPDATE] Contacted by Motor1.com, GM spokesperson Chris Bonelli says production of the new Corvette will begin in February.
It’s a great day for those who have signed their names on the dotted line to buy a C8 as it appears production of the mid-engined Corvette has finally started. The eighth generation of Chevrolet’s popular sports car was originally scheduled to hit the assembly line towards the end of 2019, but the UAW strike took its toll and forced General Motors to push back production until February.
It looks like they’ve managed to get everything ready a few days sooner, with production at the Bowling Green, Kentucky factory now underway. The reveal comes to us from Chevy salesperson Mike Davenport through his YouTube channel called “Chevy Dude” where he regularly posts videos about everything interesting that’s going on related to the C8 and other models that have the bowtie emblem. He was the first to break the news about Chevy cutting back on dealer allocations for the Corvette’s 2020 model year, which was shortly confirmed to Motor1.com by a spokesperson.
It goes without saying Chevy Dude is talking about the production of customer cars, including his very own C8. Another tidbit revealed is about the cancellation of the optional exposed carbon fiber ground effects for the 2020MY due to supplier issues. If you have ordered the car already with this option, Chevy will have no other way but to delete it.
For those who haven’t pre-ordered the new Corvette and are interested in getting the 2020MY, it appears April is going to be the last month when dealers will be able to ask Chevy for cars. Interestingly, Chevy Dude also knows the production of the mid-engined sports car will transition to the 2021MY in September.
That effectively means the initial model year of the C8 will only be in production for about seven months. We also get to learn the first cars will hit dealers across the country around mid-February or closer to the end of the month.
As you might have heard already, the 2021MY is rumored to come with a price bump, but nothing is official at this point. All we have for the time being is a rumor originating from a “well-placed source” cited by Motor Trend who is saying the Corvette will lose the sub-$60,000 sticker. Chevy Dude doesn’t expect the price increase to be significant, based on his 20-year experience in selling cars and analyzing Corvette pricing changes from one model year to the next.
Motor1.com has reached out to Chevy for comment and will update the article if we get a response.
Source: Chevy Dude / YouTube
The 58th Rolex 24 at Daytona, the first round of the 2020 IMSA WeatherTech SportsCar Championship season, saw the first race for the new Corvette C8.R, the participation of an all-female driver line-up, 2019 NASCAR champion Kyle Busch’s first start in a 24-hour race and Ben Keating at the wheel of two different cars.
A NOTEWORTHY DEBUT FOR THE NEW CORVETTE C8.R
The #3 Corvette C8.R finished the first 24-hour race of its career in fourth place in GTLM (the equivalent of LMGTE Pro at the 24 Hours of Le Mans). Drivers Antonio García, Jordan Taylor and Nicky Catsburg encountered zero problems with the car and completed 785 laps (nearly 5,000 kilometers). Unfortunately, the same cannot be said of the #4 Corvette C8.R of Gavin-Milner-Fässler. As the car was in the top 5 in its class going into the ninth hour, an oil leak caused the car to return to its garage. The leak was found to be in an area that forced the mechanics to remove the engine for repair and the work took almost nine hours. The #4 was then able to hit the track again and finished the race in 36th place.
Much like the 24 Hours of Le Mans, the 24 Hours of Daytona is an extremely challenging race. To make it to the checkered flag with an all-new car is already a major accomplishment for Corvette Racing. The American team’s next stop is the 6 Hours of the Circuit of The Americas on Sunday 23 February in Austin, the fifth round of the 2019-2020 FIA World Endurance Championship season.
AN ALL-FEMALE DRIVER LINE-UP
All-female driver line-up Christina Nielsen, Katherine Legge, Tati Calderon and Rahel Frey shared GEAR Racing powered by GRT Grasser’s Lamborghini Huracan GT3 in the GTD class, but the car was forced to retire after a fire.
KYLE BUSCH ENJOYS HIS FIRST ENDURANCE RACE
2019 NASCAR champion Kyle Busch took the start in his first Rolex 24 at Daytona at the wheel of the AIM VASSER SULLIVAN team’s Lexus RC-F GT3. Along with teammates Parker Chase, Jack Hawksworth and Michael de Quesada, Busch finished 26th overall and ninth in the GTD class. The American driver pulled off a double and a triple stint without the slightest mistake and said after the race he really enjoyed the experience and hopes to return for the overall win.
BEN KEATING DOUBLES DOWN
Ben Keating participated in his 10th Rolex 24 at Daytona at the wheel of not one but two cars: the #52 ORECA 07 fielded by PR1 Mathiasen Motorsports in the LMP2 class and the #74 Mercedes AMG-GT3 fielded by Riley Motorsports in GTD. Both cars crossed the finish line, the #52 ORECA 07 in 10th place overall and second in its class two laps from the winners, and the #74 Mercedes AMG-GT3 in 29th place overall and 11th in its class. This was the fifth time Keating participated in the race with two different cars.
Source: 24H LE MANS
There’s A New Engine In The C8.R Corvette, And It Sounds Nothing Like Its Predecessor.
They say beauty is in the eye of the beholder, and although that’s true, it can also be in the ear of the listener.
Since the Corvette first hit the streets back in the 1950s, it was imbued with the beautiful and nearly magical sound of V-8 performance. It was a deep, bass-filled rumble that just oozed a feeling of power. Over the years, the sound emanating from Corvettes, both on the street and at the track, had a distinctive note that became synonymous with the car. When the Corvette moved to the LS1 in 1997, the firing order was tweaked a bit, and although the sound did change, it still had that deep rumble that we all love.
But the only thing constant in the world is change. For the C8.R, Chevrolet Racing really changed things up with its new mid-engine marvel, but it wasn’t the engine placement that ended the car’s iconic sound signature. It was the engine itself. Gone is the deep baritone exhaust note, replaced instead with a high-pitched Ferrari-like sound. Think puberty in reverse. And although we love the sound of a wound-out Ferrari or other Italian supercars, having that pitch emanate from the back of a Corvette is something that will be hard to get used to. We’re not saying the sound is bad—it’s actually pretty badass—but it’s not even close to the sound signature we’ve come to associate with Corvettes.
The real culprit here isn’t the new 5.5L DOHC V-8 that Chevrolet moved to. Instead, it was the choice to go with a high-revving flat-plane crank. This drastically changed the firing order of the engine and eliminated the classic American V-8 sound that’s typical with the firing sequence of a traditional cross-plane crank. But we know what you’re thinking: “Well, this is just the race car, so I’m going to be able to get my V-8 rumble fix from the production car!” Well, yeah, for now. You see, for Chevrolet Racing to run this new DOHC flat-plane crank mill in the C8.R, it has to, according to the rules, run a similar engine in at least 300 production cars. So does this mean that an eventual C8 Z06 variant will lose its iconic exhaust note?
Corvette “had reason” to take its No. 4 car back out on track after lengthy repair…
The “tough lessons” of the No. 4 Chevrolet Corvette C8.R’s tumultuous Rolex 24 at Daytona debut gave Corvette Racing confidence going forward with its new car, according to team manager Ben Johnson.
The silver No. 4 Corvette spent eight hours in its garage during the IMSA WeatherTech SportsCar Championship season-opener after a cracked bell housing resulted in an oil leak.
Having pitted at around 11 p.m. the car eventually returned to the track close to 8 a.m. but it still managed to be classified as a finisher, albeit 327 laps behind the GTLM class winner.
While not divulging the extent of the oil leak and associated damage, Johnson explained why the team kept its car in the garage for so long.
“To fix the problem we had to move the engine back,” he told Sportscar365.
“We tried to do it with the engine installed to expedite it but then we realized that if we wanted to get it back on track, we had to take time to take the engine out and put it back in.
“We just took our time to make sure that there was nothing else. At that point, we were no longer in contention, but we had reason to go out and just understand where else the car may have issues.
“It was just kind of a test session after that.
“I think we will go back and disassemble the whole car. We have some issues to address with the oil leak.”
Oliver Gavin, who shared driving duties in the No. 4 with Tommy Milner and Marcel Fassler, said the Corvette crew “wanted to be methodical” about its repairs which added to the length of time it spent in the garage.
The Englishman suggested that the car was starting to show signs of promising pace that it could have taken through the night had the leak not occurred.
“It was really tough on the guys, eight hours of working from midnight until eight in the morning, it was crazy,” Gavin told Sportscar365.
“As soon as that happened, we knew that our day was done and that we wouldn’t be challenging. It was a shame because up to that point, our car had just started to come along.
“It wasn’t super strong right at the start, but we were gaining on it as we went through the race. Could we have been in the mix at the end? Who knows. But there was a lot that we’ve learned from this.
“As a team, we figured a lot of stuff out today. Testing is great but you really see exactly where you are when you come to a race and see where your competition is.
“We’ll take that away and process the data to see how we can make ourselves and the car better for Sebring.”
The No. 3 Corvette fared better than its sister car with Antonio Garcia, Jordan Taylor and Nicky Catsburg bringing home a fourth-place class finish on the lead lap.
Johnson said that this car’s run wasn’t entirely straightforward, but it held up well enough to remain in contention for a podium heading into the final two hours.
“We had a slight clutch issue at one point, but we had fixed it after the first stop that we witnessed it, so it wasn’t a time loss,” he explained.
“But nothing held up that car specifically again. We were really happy that all the execution, pit stops, driver changes… all things that you don’t get to test in anger until you reach the race, all went super well.”
Johnson added that the Rolex 24 has given the Corvette team confidence ahead of its next race outing at the ‘Super Sebring’ endurance racing double-header weekend in March.
“Coming away from our first race with one car on the lead lap… the issue with the oil leak is obviously very apparent, but when we looked at it we realized it’s a pretty simple fix,” he said.
“I think it raises everyone’s confidence that we can get through some of these early tough lessons and move on to Sebring in a much better spot.”
Source: Daniel Llyod for Sportscar365
Sports car racing fans have come to know the sound of Corvette Racing’s menacing V8 engines as one of IMSA’s most unmistakable soundtracks. The punch to the chest delivered by the Corvette C7.R through the 2019 season, and all of its predecessors dating back to the program’s debut in 1999, was as unique as it was thrilling.
It makes the brand’s greatest shift with its mid-engine C8.R (pictured above) — which debuts in competition this week at the Rolex 24 At Daytona, featuring a fresh V8 motor with an entirely different voice — a new experience for Corvette fans. Thanks to the move to a flat-plane crankshaft in the 5.5-liter naturally-aspirated powerplants, the C8.Rs strike the ears with a higher pitch that, in typical Corvette Racing fashion, is unlike anything else in the field.
Which exhaust note sounds better? Take a listen to the C8.R from testing at the Roar Before The 24, and from a C7.R during December Daytona testing in 2016, and you decide.
Original Source: Marshall Pruett for Racer.com
Corvette Racing’s veteran stars, Oliver Gavin and Antonio Garcia, are positive about the new mid-engined C8.R’s progress but are uncertain how it will perform relative to its GT Le Mans class opposition at this weekend’s Rolex 24 at Daytona.
Gavin’s full-time partner Tommy Milner set Corvette Racing’s fastest time in Roar Before the 24 qualifying which decides garages and pit stalls, and he was encouragingly just 0.108sec off the top time in class, set by James Calado in the Risi Competizione Ferrari 488 GTE.
However, Gavin warned that the race will be several hours old before everyone gets an accurate picture of how the GTLM contenders match up.
“The C8.R is a brand new car and this is its first race outing,” said the 2016 Rolex 24 winner. “We won’t know where we are in respect to the competition, and they will be looking at us and figuring out where we’re strong and where we’re weak.
“You can pick up little bits and pieces during the Roar and even in the two or three practice sessions before the Rolex 24, but you never really get a great idea of where you’re at until you get five hours or so into the race.
“But it always comes down to the last two hours. It would be quite remarkable if we could come right out of the box and be super-fast, super-reliable and have a successful weekend the first time out.”
Two-time IMSA WeatherTech SportsCar Championship GT Le Mans title winner and 2015 Rolex 24 winner Garcia also sounded a note of caution.
“So far, the new Corvette has been quite decent in testing,” said the Spaniard who is entering his seventh season with the legendary team. “It is still very early stages for this car.
“Even though we think we are ready, there are things that can come up. We must do everything we can to make sure we are as prepared as possible. Then we can see what we really have.
“Our testing has been a consistent evolution between track days and simulator work. We’ve been able to develop a plan to develop the car even though we weren’t testing on the track. The correlation of data has been good. Everything that we have tested virtually is working in real life. That makes life a lot easier when you can use all your tools to improve.
“We continue to validate all the work we’ve done and what we find on the racetrack. We are on the right track.”
While Gavin and Milner continue to be partnered by Marcel Fassler for the endurance races, Garcia not only is working with a new enduro extra – Nicky Catsburg – he also has a new full-time partner.
Jordan Taylor, who in 2017 won the IMSA Prototype title with the team owned by his father Wayne Taylor, and has two Rolex 24 wins to his credit, has moved to the GTLM class with Corvette, replacing Jan Magnussen.
This continues a relationship with the Doug Fehan-run team that stretches back to 2012, the first of six years in which Taylor raced a Corvette in the Le Mans 24 Hours. Partnering Gavin and Milner, he won the GTE Pro class at Le Mans in 2015.
“I’m excited to go back into GT racing with Corvette in GTLM with all-manufacturer teams and all-professional drivers,” he said. “The class will get a lot of eyes on it with the first race for the C8.R.
“The race itself will be extremely difficult. I’ll have to get used to looking in my mirrors again! In testing, I was reminding myself to check the mirrors leaving certain corners so I could get in the habit of doing it for the race.
“So I’m looking forward to it. Overall wins are fantastic, but a win is a win; you still get a Rolex watch no matter what class you’re in! But for us in GTLM, the competition will be the same if not more difficult than in prototypes.”
Source: David Malsher-Lopez
The Corvette C8.R #4 driven by Oliver Gavin, Tommy Milner, and Marcel Fässler at the Daytona Roar Before the 24 at Daytona International Speedway. The C8.R is Corvette’s first mid-engine race car.
The Corvette C8.R #4 driven by Oliver Gavin, Tommy Milner, and Marcel Fässler at the Daytona Roar Before the 24 at Daytona International Speedway. The C8.R is Corvette’s first mid-engine race car.
The #3 Corvette C8.R driven by Antonio Garcia, Jordan Taylor and Nicky Catsburg at Daytona’s Roar Before the 24. The C8.R uses a 5.5-liter flat-plane crank engine different than the 6.2-liter push-rod engine that will be in the first production C8.
Chevy debuted the Corvette C8.R with the #3 and #4 cars. The race car gets lights in the lower fascia corners – where the production car has oil coolers. The #3 C8.R driven by Antonio Garcia, Jordan Taylor and Nicky Catsburg at Daytona’s Roar Before the 24.
At the Daytona Roar Before the 24 at Daytona International Speedway in Daytona Beach, the #4 Corvette C8.R driven by Oliver Gavin, Tommy Milner, and Marcel Fässler set fast time of the ‘Vettes – the time was just a tenth of a second off the fastest Ferrari.
The Corvette race car is lighter with more down-force (see the big wing) than the 3,647-pound production C8. The #3 Corvette C8.R driven by Antonio Garcia, Jordan Taylor and Nicky Catsburg at Daytona’s Roar Before the 24.
The Roar Before the 24 was the Corvette C8.R’s first outing in the IMSA Weathertech Series. The C8.R #4 driven by Oliver Gavin, Tommy Milner, and Marcel Fässler.
The #3 Corvette C8.R driven by Antonio Garcia, Jordan Taylor and Nicky Catsburg negotiates the infield turns at Daytona’s Roar Before the 24. The C8.R hits speeds of 170 mph ion the oval.
Corvette Racing set for COTA-Sebring double FIA WEC run with C8.R
Corvette Racing looks set to contest the 1000 Miles of Sebring, in what would be the second consecutive FIA World Endurance Championship outing for the new Chevrolet Corvette C8.R.
Sportscar365 has learned that provisional plans are in place to run the Sebring WEC race alongside its two-car factory GT Le Mans class program in the Mobil 1 Twelve Hours of Sebring the following day.
It would come as one of the prerequisites from the ACO, which has stipulated that the Pratt & Miller-run team must run in at least two regular-season WEC races in order to be guaranteed a pair of GTE-Pro entries for the 24 Hours of Le Mans.
The team ran the Shanghai WEC race in 2018 in addition to Sebring last year with its previous-gen Corvette C7.R.
While declining to comment or confirm on any WEC plans beyond its COTA entry, Corvette Racing program manager Doug Fehan said that it’s been their intention to run two regular-season races in the 2019-20 WEC season.
“Right now, that’s the plan but we’re running down a road,” Fehan told Sportscar365.
“We haven’t refined what exactly that plan is going to be. I couldn’t give you every detail and widget.
“We’ve been busy for a couple of years trying to race and design, build and develop the new car. This adds to the challenge of all of that.
“I think most people would understand that we don’t have it completely defined yet.
“It’s a case of dealing it in an orderly fashion.
“We can’t become overwhelmed too much with what’s going on down the road when we have to focus on what we need to accomplish [in Daytona] in a couple of weeks.”
While set to give the new mid-engined GTE contender its competition debut in the Rolex 24 at Daytona later this month, the car’s second race will come just four weeks later at Circuit of The Americas, with a single entry having been submitted for the WEC replacement round.
Fehan said details on that program, including drivers, have yet to be determined.
He explained the reason for doing the additional WEC races is to “try as best we can” to support the globe-trotting championship.
“We understand the value that has to the sanctioning body and the value to the global fan base,” he said.
“We know it’s important but they also know the business side of it that prevents us from doing both things. They get that.
“I think they also appreciate how hard we’re trying to make all of the accommodations we can to keep the ball moving down the field.
“It’s not easy for us and they know it’s not easy for us and they appreciate that.”
No Issues in 2019 ‘Super Sebring’ Endeavor
Fehan said the team faced no issues in its double-duty endeavor at Sebring last year, in what was only the second-ever time the team raced three cars between two different series on the same weekend.
In addition to its over-the-wall crew and several other staff, drivers Antonio Garcia, Jan Magnussen and Mike Rockenfeller took part in both Friday’s eight-hour WEC race and the around-the-clock IMSA enduro the day later.
“That worked out great,” Fehan said. “We were lucky because we had enough equipment.
“It’s not like you can piggyback what you have set up. You’ve got to have a completely additional set of stuff.
“Between stuff that we had in stock and stuff that we had for the Cadillac program, we had enough in place.
“That system is getting better and we learned from that on all the things we did right and all the things that we know we could improve upon.”
Source John Dagys; SportsCar365
The waiting is over for Marcel Fassler. This weekend’s Roar Before the Rolex 24 was the first opportunity for the three-time Le Mans winner to drive the revolutionary mid-engine Corvette Stingray C8.8 — either in a test or even on a simulator — and he likes what he’s found.
“I heard really good things beforehand, so I was really looking forward to my very first drive,” said Fassler. “I finally got my first chance on Friday, and I am more than positively surprised how good and how much fun it is to drive. It’s difficult to compare both cars, because they are completely different in how they were built and set up, but this is a big step forward. I’ve enjoyed every lap in this car around the track.”
Fassler won GTLM honors as part of a 1-2 outing for Corvette Racing in his Rolex 24 debut in 2016, with his car prevailing by 0.034s in the closest class finish in event history. The 43-year-old Swiss driver enjoyed the changing conditions at the Roar — which have ranging from a warm Friday to a wet Saturday to a sunny but chilly Sunday — as he tested the silver No. 4 Stingray with Tommy Milner and Oliver Gavin.
“The weather this weekend is the best we could have,” Fassler said. “Now we know hot conditions, we know wet conditions and today we’ll work with colder conditions. Experience shows that everything can happen at Daytona. It can be super warm or freezing cold, or a lot of rain like last year.”
Antonio Garcia, who shares the traditional yellow No. 3 Corvette with Jordan Taylor and Nicky Catsburg, was also pleased with the progress of the C8.R.
“It’s going the right way,” said Garcia, a two-time Rolex 24 winner. “We’ve got to gather as much data as possible to prepare for the first race of the season — the first race for the actual car. It’s going to be very difficult for us, because we don’t know how the car is going to behave, with a lot of unknowns. I think we’re as prepared as we can be, and we are using this test to be even more prepared. So far, it’s going well. But in racing, you never know. We’re probably the best team out there to get with a new car, and so far it looks good and drives good. I can’t wait until the start of the race.”
Corvette Racing Program Manager Doug Fehan shares the optimism of his drivers.
“Everything operationally has worked out well,” Fehan said. “The cars are performing well. We haven’t had any major issues in durability and reliability — things we are looking for here. Every day we come out we write another page in setup and learning about the chassis and aero on the car. So every lap’s an important lap.”
Original Source: J.J O’Malley; Racer
Corvette Racing drivers on anticipation of Roar Before Rolex 24 with new mid-engined C8.R…
Antonio Garcia believes there will be “big steps” to come in the Chevrolet Corvette C8.R’s development as the new-for-2020 mid-engined GT Le Mans class contender makes its public debut in this weekend’s Roar Before the Rolex 24.
The Pratt & Miller-built Corvette, along with Porsche’s 2019-spec 911 RSR, are the two all-new GTE-spec cars set for their first official competitive outings in IMSA WeatherTech SportsCar Championship competition during the three-day mandatory test.
While having already completed private testing at the 3.56-mile oval/road course, Garcia believe every lap will matter in their plan for the weekend.
“There is a lot to discover and develop,” Garcia said. “Usually your starting point is better than what you previously had.
“But this is completely different. We are still in the early stages with this new Corvette.
“There will be big steps for sure.
“I don’t know when we will get to the point where we will start making little steps. We need to run this car and we need to race it to find out where we are against our competition.
“We are concentrating on our own work. Whenever it becomes race time, we will know where we actually are.”
Garcia’s new full-season co-driver Jordan Taylor said they won’t necessarily be concerned about pace at the Roar, which will also set the pit lane and garage allocations through a qualifying session on Sunday morning.
The 28-year-old, who makes the switch from his family’s Wayne Taylor Racing operation, said little things, such as driver changes, will be a focal point as well once they achieve the targeted baseline.
“As many laps as we can get at the Roar and going through the program, getting all the drivers on the same page from a setup point of view and then the little things like pit stops and driver changes will be different than what we’ve had in the past,” he said.
“The car is a little more tricky to get in and out.
“Understanding that muscle memory of the process of getting in and out, where the seatbelts go, where the drinks bottle is, where the air hose goes… those little details that we haven’t refined that were refined with the C7.R are things that will show up in a 24-hour event, so those are things we will need to check off the list at the Roar.”
Gavin: “Very Structured” Plan for Weekend
Team veteran Oliver Gavin, who returns to the No. 4 entry alongside Tommy Milner, said that coming away with achieving 60 or 70 percent of their list will be considered a “big win” over the weekend.
“The team is going to have a very structured plan,” Gavin said. “And that’s one of the things that’s so good about Corvette Racing. We plan our time and fundamentally understand what all we have to work through and the list of things we need to achieve.
“The third drivers will need time in the car. We’ll all have to work through that program and procedure as best we can.
“Certainly we’ll learn a huge amount every time we go on track just with how certain tires work, how the braking package works, the aero setup, weight placement… all kinds of different thoughts that the team will look to work through.
“We know that of that list of 50 things we want to try and achieve, the chances are that if we can come away with 60 or 70 percent of that done, it’s a pretty big win.”
Original Source; John Dagys. Sportscar365
Corvette Racing completed the unveiling of its brand-new C8.Rs with the predominantly silver No. 4 entry shown in private testing at Daytona International Speedway. The yellow No. 3 driven by Antonio Garcia, Jordan Taylor, and Nicky Catsburg was revealed last week.
The mid-engine halo car from General Motors replaces the ultra-successful front-engine C7.R and its many predecessors, which delivered victories at the Rolex 24 At Daytona, Mobil 1 Twelve hours of Sebring, 24 Hours of Le Mans, and numerous championships for the factory team based in Michigan.
The No. 4 will rely upon team veterans Oliver Gavin and Tommy Milner as its full-time drivers and Marcel Fässler, who slots in for the Michelin Endurance cup rounds.
Both C8.Rs return to Daytona for IMSA’s official Roar Before The 24 test, which runs from Friday through Sunday.
Marshall Pruett; Racer