here and in Part 2 next month.
here and in Part 2 next month.
New engine configuration changes everything
GM engineering went into preliminary design knowing they’d be working on a mid-engine vehicle — the first production Corvette in eight generations to sport that configuration. “We evolved the front-engine architecture as far as we could for performance, so shifting to a mid-engine design was the next logical step to improve an already great car and be the segment leader,” explains GM’s Tadge Juechter, executive chief engineer-Global Corvette. Equipped with the Z51 performance package, the 2020 Corvette Stingray can accelerate 0-60 mph (0-97 kmh) in 2.9 seconds and reach top speeds of 194 mph (312 kmh). Pushing the engine toward the vehicle’s rear affected many things, including the car’s center of gravity, the relative position of occupants, transmission location and design of underbody panels and trunk storage. The mid-engine design also introduced higher operating temperatures and noise to new areas of the car.
The eighth-generation Chevrolet Corvette — all eight generations (C1-C8) shown above, left to right respectively — from General Motors Co. started production earlier this year. This mid-engine sports car is not only impressively fast, and the most composites-intensive Corvette yet, but it features an array of genuinely innovative composites applications. Source | General Motors Co.
“Because of the mid-engine, we had to do things differently,” explains Ed Moss, Corvette body structure engineering group manager. “From the start, we had so many discussions about how to lay out the body structure. At one point, everything was on the table as we discussed the best way to design and build each system. For example, we debated metallic versus composite for wheelhouses. If we’d kept the C7’s composite wheelhouses, we’d have to bond to the hinge pillar [A pillar], which is immediately adjacent to the front wheel in a mid-engine vehicle, leaving very little package space. We went with metal there. We even briefly discussed metal versus composite body panels. However, it would’ve been economically infeasible to create the C8’s styling lines in metallics.”
“A real challenge we faced was how to handle air induction,” recalls Chris Basela, Corvette body structure lead engineer, explaining the need for a different method to funnel cooling air into and across the naturally aspirated, 495-horsepower, 6.2-liter V8 engine, which generates 470 foot-pounds (637 Newton-meters) of torque. “We tried all kinds of designs that forced air to take really torturous paths, creating eddies and flows we didn’t want. It took lots of iterative work with the powertrain team to develop the best path for airflow because the car needs to breathe freely with no restriction. We also needed access to the air box and had to work around rear trunk space. Another issue was heat and engine noise in the passenger compartment, because occupants no longer sit behind the engine but are positioned directly in front of it. And we were especially conscious of cabin air quality as laws had changed in Europe and elsewhere since the C7, so we worked really hard to reduce VOCs [volatile organic compounds].”
“Even working out how to assemble the car was a challenge,” adds Moss. “With a front-engine design, you have a long hood and large engine compartment, providing operators plenty of room to build the car from inside the compartment, even with the front bumper beam already welded on. On the mid-engine Corvette, with its very short front clip, we keep the front of the car open as the vehicle is built out, then bolt on the front bumper.”
“It was quite a balancing act to get the proper shapes, while ensuring our suppliers could produce the parts and our team in Bowling Green [GM’s Kentucky-based Corvette assembly plant] could assemble them,” continues Basela. “In the end, there was only one carryover composite from the C7’s body to the C8.” This was tough Class A, 1.2 specific gravity (SG) sheet molding compound (SMC) developed for the 2016 Corvette and used in a variety of exterior closures on the new vehicle.
For four generations (C5-C8), Corvettes have featured a three-layer, multi-material body structure: the frame, usually a mix of aluminum or steel — this time with a carbon fiber-reinforced composite (CFRP) part; the body structure, which is largely bonded composite to capitalize on design and manufacturing flexibility; plus bolt-on closeouts (body panels), which have been composite since Covette’s June 1953 debut. This layered hybrid structure not only provides affordable lightweighting in high production volumes — particularly for cars of this performance class — but also permits multiple vehicle variants to be produced at low tooling investment. In fact, for the current C8, GM managed to produce all Class A composite body panels (bonded inners and outers) on both the base model coupé and convertible using just 20 tools.
GM and its suppliers have already won many awards for innovative composites use on the 2020 Corvette Stingray. Among those standing above are key GM engineering team members at last November’s 49th annual Automotive Innovation Awards Gala, where GM won SPE Automotive Div.’s Vehicle Engineering Team Award. A number of composite parts on the vehicle also were finalists or category winners at the event. Source | SPE Automotive Div.
In addition, Corvettes have always been engineered with an open-roof architecture, regardless of whether they are actually convertibles or coupés with fixed or removable roof panels. Because open-roof vehicles are generally less stiff than those with fixed roofs, an important focus for each Corvette’s engineering is always to create the stiffest foundation possible to improve suspension and steering. Historically, tunnels(housing transmissions and driveshafts on front-engine vehicles) have dominated Corvette body structures and have been key enablers for achieving high torsional rigidity. In the case of the new Corvette, GM achieved even higher rigidity. With the roof removed, the C8 body is 53.78% stiffer than a benchmark high-performance mid-engine competitor, 29.27% stiffer than a second high-performance mid-engine competitor, and 13.79% stiffer than the C7. Two composite parts made important contributions to vehicle stiffness—one directly attached to the frame structure (rear bumper beam) and another attached to the underbody (lower tunnel closeout).
The C8’s frame is largely aluminum alloy with one CFRP part developed to meet GM’s stringent dollar-per-kilogram targets. In contrast, the C7 frame was all-aluminum and the C6 was mostly steel.
The only composite part directly mounted to the frame that travels with the body-in-white (BIW) through the electrophoretic rust-coat process (which GM calls ELPO), is a unique CFRP rear bumper beam. This part helps stiffen the frame and contributes to rear-impact performance. Its curved shape — possible thanks to a novel process called radius pultrusion developed by Thomas GmbH + Co. Technik + Innovation KG (TTI, Bremervörde, Germany) — enables it to match rear styling cues and fit in limited package space while maintaining dimensional integrity close to engine-bay heat. As the auto industry’s first curved pultruded part (see our full feature on this part in the CW May 2020 issue), the hollow, two-chambered beam was produced by Shape Corp. (Grand Haven, Mich., U.S.) on equipment developed and built by TTI. The beam weighs just 1.3 kilograms and features a bonded/bolted tow-hook eye capable of 25 kilonewtons of pull-out force.
An auto industry first, the 2020 Corvette sports a curved rear bumper beam in pultruded carbon fiber composite produced with 87 individual carbon tows and eight carbon fiber non-crimp fabrics (NCFs) impregnated with polyurethane-acrylate resin. The hollow, two-chambered beam is 66% lighter than the outgoing aluminum beam and met GM’s demanding dollar-per-kilogram targets. Source | Shape Corp.
Body Structure: part A
Virtually all of the C8’s body structure components are composite and are bonded and/or bolted to the frame after the latter undergoes ELPO. Notable composite parts at this level include structural underbody closures and the floor — which we’ll cover in this issue — and front and rear trunks, induction ducts and the rear surround and bulkhead — which we’ll cover, along with body panels and trim, next month.
This hybrid-composite, lower-tunnel closeout is produced using a variant of liquid compression molding. It eliminated secondary attachments, lowered mass by 3 kilograms and reduced labor, tooling and capital costs vs. aluminum. Source | SPE Automotive Div.
The removable lower-tunnel structural closeout on the C8, which acts as an access door, contributes more than 10% of the vehicle’s torsional rigidity and acts as a primary load path during a crash. This hybrid-composite panel consists of three layers of glass fiber preform. These consist of continuous/woven and chopped/random fibers at 38% fiber volume fraction (FVF), with veils added to top and bottom face layers on each stack for improved surface finish. Glass preforms are interleaved with two layers of preforms made using Toray (Tokyo, Japan) T700 12K standard-modulus carbon fiber in the form of NCF biaxial fabric at 21% FVF and a vinyl ester (VE) matrix. The closeout is produced by Molded Fiber Glass Co. (MFG, Ashtabula, Ohio, U.S.) using its proprietary PRiME (Prepositioned Reinforcement ensuring Manufacturing Excellence) process, a type of liquid compression molding (LCM).
Aside from a single aluminum closeout near the rear wheels that is part of the engine cradle, the remaining underbody panels consist of either compression molded SMC or injection molded thermoplastics. Among other benefits, these panels reduce underbody turbulence and drag, improve fuel efficiency and keep moisture, dust and stones out of the vehicle’s engine and driveline. Further, they provide the dimensional foundation for multiple exterior and interior interfaces.
The low-density but structural SMC panels feature new formulations (in this case, 40% FVF chopped fiberglass/unsaturated polyester (UP) resin) developed by MFG. The material is called “float” SMC because each panel’s density is less than 1.0 (average SG=0.97) and thus can float in water. MFG produced all structural SMC and LCM’d parts on the car.
An important contributor to vehicle lightweighting on the C8 is the extensive use of “float” SMC. With specific gravity values less than 1.0, this low-density but structural SMC developed by MFG is used in a variety of non-Class A parts, including underbody panels, the dash panel, air-induction ductwork and the front trunk. Source | Molded Fiber Glass Co.
The vehicle also sports a hybrid floor optimized for torsional bending and side-pole impact protection (engaging the rocker panels and tunnel, to which it is joined). Floor panels feature cabin-facing stamped aluminum bonded to sheets of road-facing 1.5-SG composite (60 wt-% continuous and woven glass fiber/VE) produced via the PRiME process. Before heat-bonding both layers with Pliogrip 9100 polyurethane structural adhesive from Ashland Global Holdings Inc. (Wilmington, Del., U.S.), MFG cleans and preps the materials.
All composite parts directly bonded to the C8 frame are first subjected to laser ablation, a process developed by GM, MFG and Adapt Laser Systems LLC (Kansas City, Mo., U.S.) for the 2016 Corvette, and adapted from a composites industry method for mold cleaning. Laser ablation replaces hand sanding and reduces labor, time and cost, eliminates dust and improves repeatability. Laser path, angle of attack and energy level are customizable for each part’s material and geometry. To maximize manufacturing flexibility, the entire underbody, including the floor, is connected to the frame and itself via bonding and screws.
In the August issue of CW, we’ll continue covering composites innovation on the new Corvette, resuming with additional components at the body structures level and finishing with exterior closures (body panels), plus additional trim and upgrades.
Peggy Malnati for Composites World
Thanks to our friends at the MidEngineCorvetteForum.com, we’ve got two different confirmations that newly completed 2020 Corvettes are once again shipping from the Corvette Assembly Plant in Bowling Green
The shipping confirmation comes from the Jack Cooper Transport website. Owners can post their VIN into the search box and it returns the shipping manifest.
Yesterday, the National Corvette Museum received four new 2020 Corvettes while another shipping manifest shows 2020 Corvettes with VINs ranging from 2814 to 3354 heading to multiple Chevy dealers in the midwest.
Thanks to some of the sleuths on the MECF, we also see a few CTF Convertibles heading up to the Detroit area:
This is great news for customers who have been “patiently” waiting for shipping of the new 2020 C8 Corvettes for the first time since the Corvette Assembly Plant reopened on May 26th after being closed for two months due to the coronavirus.
How to Track Your 2020 Corvette
CorvetteBlogger contributor Jeremy Welborn previously wrote this post on how to Track the Shipping of your C8 Corvette via Jack Cooper. To find the shipping status of your 2020 Corvette, go to https://www.palsapp.com/, then click on the search icon on the top right of the page (looks like a magnifying glass). Enter your VIN and click the search icon to the right of the input field.
The future of the mid-engine Corvette should be long and very fast.
Future variations of the new-generation Chevrolet Corvette have been the cause of much debate over the past year. Hagerty recently claimed that it has the scoop, via an “industry leak” on the roadmap for the Corvette’s’ development in trim and model variations. Between that and a lot of industry chatter and some leaks, we’re sure that the Corvette is not only going to evolve over the coming years but mutate into something incredibly special. Here’s how the future lineup of the Corvette should shape up.
2021 C8 Corvette Stingray
The first iteration of the new Corvette is on the road, although in limited supply due to the pandemic. It comes with an LT2 6.2-liter naturally aspirated V8, making 490-495 hp and 465-470 lb-ft depending on trim level. There’s no manual option, and power is controlled and delivered to the rear wheels by a Tremec supplied 8-speed automatic transmission.
Only 2,700 C8 Corvettes were built before the virus struck, then production had to be paused. The years given below are the planned model years. However, development programs throughout GM have been paused, and there could be significant delays.
2022 C8 Corvette Z06
The Z06 badge means added performance, and initial reports claimed the first heated up C8 Corvette would arrive with 650 hp and 600 lb-ft from a 5.5-liter LT6 V8. The race-inspired LT6 engine is set to have a flat-plane crank design that’s rumored to rev past 8,000 rpm. Since then, though, credible sources have reset expectations at 600 hp and 470-500 lb-ft of torque, but will, indeed, rev fast and long. The Z06 will also have a wider body to accommodate larger brakes inside the larger wheels and tires, as well as a more aggressive suspension setup. There’s also reports that an optional aero package will include a unique rear wing.
2023 C8 Corvette E-Ray
Some enthusiasts aren’t going to like this, but the Corvette is going to go hybrid in the 2023 model year. It will use the same 6.2-liter LT2 V8 as the Corvette Stingray, but it’ll be bolstered with an electric motor located between the front wheels. The 1.94-kWh lithium-ion battery pack will be located in the middle of the car, and the electrical system’s peak output will be 85 kW. Total output should sit at around 600 hp and 575 ft-lb of torque – around the same as the Z06 model. Unlike the Z06, the E-Ray isn’t expected to have the widebody setup and will be the first-ever all-wheel-drive Corvette.
2023 C8 Corvette Grand Sport
There are conflicting reports on this one with some claiming the Grand Sport will be the hybrid model, and others suggesting that the Grand Sport will be powered by the Stingray’s 6.2L LT2 V8, but with the chassis and aerodynamic enhancements from the Z06. Using the base model V8 and upgrading the chassis is the traditional recipe for the Grand Sport. We’re trying to verify either way, but we currently suspect the Grand Sport will be the name of the hybrid model.
2024 C8 Corvette ZR1
The ZR1 has traditionally been the flagship Corvette, cranked up then honed to hunt down supercars at the track. The ZR1 will come with a twin-turbo variant of the flat plane crank 5.5L V8 LT6 engine making a fearsome 850 hp and 825 lb-ft of torque. For reference, the C7 generation ZR1 made 755 hp and 715-lb-ft of torque and that was frightening enough for the uninitiated.
The C8 generation Corvette ZR1 promises to be the fastest Corvette yet, and that’s before adding the upgraded chassis with track-oriented suspension, brakes, and active aero. However, in 2025 something even faster should arrive.
2025 C8 Corvette Zora
The Corvette Zora is named after Zora Arkus-Duntov, the man who turned the Corvette into a serious performance car but didn’t live long enough to see his dream of a mid-engined version come true. Fittingly, the fastest Corvette in its history will have his name on it, and use the twin-turbo 5.5L LT7 V8 from the ZR1 paired with a hybrid-electric system. Total power output is set to be astounding at around 1,000 hp and 900-1000 lb-ft of torque. It’ll be all-wheel-drive, wide-bodied, track-ready, and feature active aerodynamics. It will also put to bed any argument of whether the Corvette is a supercar or not.
Many gearheads have a strange affinity to Hot Wheels. Here is everything you’ve ever wanted to know about the company, but never asked.
Toy cars can be divided into two categories: Hot Wheels and everybody else. For over 50 years, Mattel has dominated with what is now recognized as the best-selling toy in the world. It’s impossible to count how many car buffs, from mechanics to real race stars to TV personalities, grew up playing with these cars. Whether it was just a few models or massive collections, Hot Wheels has been part of car culture for decades and is never going to stop. Whether it’s a simple model or some fancy licensed vehicle, Hot Wheels simply enthralls.
Yet it’s incredible how some people are unaware of the facts of the company and its history. From its unique origins to how these cars are put together, the story behind Hot Wheels is fascinating. There are also touches from how some of these cars are more expensive than real ones to some unique touches on the culture. Here are 20 amazing facts about Hot Wheels to prove they’re more than just “kids toys.”‘
20/20 Real-Life Hot Wheels Jump Was A World Record
Growing up a massive Hot Wheels fan, racer Tanner Foust decided to honor them in a fun way. At the 2011 Indy 500, Foust talked the management into seeing up a massive orange ramp and raced down it in a rally car.
After 90 feet of track, Foust sailed 332 feet, the longest record for such a move. He topped it by driving through a 66-foot loop in 2012 to live out the dreams of every kid.
19 Technology In Car Building Is Amazing…
Making toys has become a very high-tech business today. Just like real car companies, Hot Wheels has adapted to the 21st century nicely. Computers and 3-D technology are utilized to make sure the designs are perfected before the building begins.
It also helps them keep on top of the latest car trends to ensure that today’s Hot Wheels are sleeker and more natural than the ones of the past.
18 But They’re Still Diecast
There are many toy car lines out there, but Hot Wheels is still the king of the bunch. The key reason is that, for all the advances in technology, every car is still diecast and built mostly by hand.
Even when cheaper materials are available, Mattel knows the diecast is what the fans want. It’s also helped in making customized cars at home for popular models. After 50 years, Mattel doesn’t want to mess with success and do away with diecast.
17 They’ve Worked With NASA
Hot Wheels have done a few astronaut-themed toys over the years. But that’s not the only connection they have with NASA. In 1998, they were able to work with the agency to create an exact replica of the Mars Rover, which landed on the Red Planet that very year.
They also worked with them in 2012 for scale models of the Curiosity rover. It’s amazing how the company got access to top-secret plans to make these toys.
16 Collectors Take It Seriously
Some may dismiss Hot Wheels as “just for kids.” But collectors take it more seriously than real automobiles. The 1969 Volkswagen Beach Bomb (only 16 prototypes were made) is known to go for at least $15,000.
Some rare models can go for a hundred grand, and collectors are always on the lookout for unique mint models. Entire museums are devoted to various cars as some Hot Wheels collections put legit car collectors to shame.
15 Scaling Down The Cars Was Tricky
A key to the company’s success is that they work with scores of real car companies to get looks at plans for their toy models. Yet it’s not so simple as just “make a smaller version.” The biggest challenge is to achieve the proper scale for the toys in a diecast model yet retain the details of the actual car.
That can be complex with some fancy vehicles. That every model has to be sized to fit the same tracks just adds to why it takes as long developing a toy car as a real one.
14 NASCAR Star Has The Record For The Longest Track
Ever since the Hot Wheels tracks were created, fans have been trying to top themselves making the most extended and most complex. A few have achieved great ones, but it’s fitting a NASCAR star holds the record for the longest.
In 2019, Joey Logano unveiled a 1,941-foot long track stretched across his garage. It weaves through his car collection with 1222 boosters before ending in Logano’s own 2018 HW Ford Mustang. Add yet another title to Logano’s list of accolades.
13 They Made A Car Coated In Diamonds
In 2008, Mattel made a big deal of celebrating the 40th anniversary of the Hot Wheels line. As a special reward, Mattel had Jasons of Beverly Hills craft the most expensive Hot Wheels car on the planet.
Cast in 18-karat gold, it’s covered with 2700 diamonds and gems totaling nearly $150,000 today. It’s become a rotating exhibit at toy museums for the glitziest Hot Wheels you could see.
12 The Darth Car Is A Speed Machine
While they do stick to toys, the company has been busy creating some real-sized cars for collectors. One of the most notable is based on Darth Vader, with the hood looking like his fearsome helmet and in jet black.
This isn’t just for show as it’s based on a C5 Corvette with a GM LS3 V-8 engine capable of 526 hp and 150 mph. The Dark Lord of the Sith would be proud of this powerful craft.
11 Every Car Is Tested To Make Sure It Can Run A Track
Almost from the beginning, Hot Wheels car fans had to have a track with the cars. They’ve gone from straight lines to elaborate roller-coaster-like loop systems to leave kids entertained for hours.
What few realize is that the track determines if a car makes it as Mattel prides itself on “every car can fit every track.” More than once, a prototype has to be altered when it won’t fit as the track decides a car’s final form.
10 There Are More Hot Wheels Cars Than Real Cars
While it’s tricky to figure out for sure, most sources agree there are at least one billion cars on the planet (give or take a few hundred thousand in auto graveyards). In contrast, since 1968, six billion Hot Wheels cars have been created.
True, many have been trashed and/or recycled, and it’s impossible to count how many have been lost in backyards. But given how 16 cars are produced every second, it’s no shock the toys outnumber the real deals.
9 Several Creators Are Legit Car Designers
The one constant of Hot Wheels is that the cars look just as good as the real deal. There’s an excellent reason for that as scores of the manufacturers are legitimate car designers. Larry Wood was a veteran of Ford before becoming one of the first Hot Wheels designers.
He’s not alone as Jack Ryan was a rocket designer who crafted the bearings that made the cars so great. Scores of the car designers were in real automobiles first, so it’s no wonder the vehicles look so good.
8 The Original Camaro Is Worth A Fortune
Mint conditions of the Original 16 Hot Wheels releases are all pretty collectible items. But one dominates from the pack. While versions of a Camaro were produced, a few had white enamel paint.
They had been meant to discover flaws in a prototype but accidentally released. A mint version of one went for a hundred thousand dollars and made this one of the most expensive toys on the planet
7 They Released A Custom Corvette Before GM Did
An early standout for the company at a custom Corvette in 1968. What made it notable was that the toy was released before GM had their actual Corvette in car dealerships.
The fact designer Harry Bradley had worked at GM indicates he may have “borrowed” the designs before he left to allow Mattel to beat GM to releasing a Corvette to the masses.
6 The Red Stripes Are Expensive
If you find what looks like an old Hot Wheels car, take a good look at the wheels. If they have red stripes, then you’ve just found a fantastic collector’s item. From 1968 to 1977, designers hand-painted red lines onto the wheels to make the cars look distinctive.
As a cost-cutting measure, they switched to all-black wheels in 1978. Some mint condition red-striped vehicles have been known to go for thousands online.
5 One Of The Original Cars Was Based On A Car With No Doors
The first wave of Hot Wheels was just 16 cars, and any of them can be valuable today. One is notable, the 1965 Dodge Deora. This car boasted no doors but rather a hatch for folks to crawl into.
It was based on a fun design used by Mike and Larry Alexander but in an irony, no real Dodge Deoras were built, to make this a truly unique model
4 A Tie-In Cartoon Got Pulled By The FCC
Today, cartoons based on toy lines are commonplace. But in 1969, Hot Wheels got in trouble when they put out a cartoon series about some teenage car drivers. Despite good messages, the show was hit by complaints about being a “half-hour commercial.”
The FCC agreed, and it was yanked off the air. The company was just ahead of their time with a cartoon tie-in for a hit toy line.
3 There’s A Fight On Where The Name Came From
Much of Hot Wheels is shrouded in myth, and that includes just where the name comes from. The familiar story is that when Eliot Handler saw the first models from designer Fred Adickes, he remarked: “those are some hot wheels you’ve got there.”
Another version is that Handler just blurted the name out in a meeting with a designer. Regardless, it just stuck to become one of the most popular toys on the planet.
2 They’re Number One…Because They Remain So Cheap
In the ranks of the most popular toys on the planet, Hot Wheels dominates. They’re not just the biggest toy vehicle sellers but also the number one selling toy in the entire world. The reason is that in many markets, the cars can still go for only a dollar each.
True, they can be put out in packs, and some nations charging a few bucks more. But many stores do sell the cars for less than a bottle of water, which is the reason they are so dominant.
1 Its Creator Was Married To Barbie’s Creator
Elliott and Ruth Handler were the First Couple of the toy world. The two had founded Mattel as a picture frame company in 1945. While making a dollhouse, Ruth decided to craft a series of dolls she named Barbie.
It was an instant hit to make Mattel a success. Elliott then realized how a toy car line could be great for boys to craft what would become Hot Wheels. The two remained together until Ruth’s death in 2002 (Elliott passed on nine years later) to be icons of their industry.
Sources: Mentalfloss.com, hotwheels.com, hotwheelsmedia.com, thrillist.com
Both cars retail for about $81,000, but one is a lot more accessible.
SPEED PHENOM ON YOUTUBE
If you’ve got $80,000 to spend and want an American high-performance car, now’s a pretty good time to be in the market. In addition to tire-shredding stalwarts like the Camaro ZL1 and Challenger Hellcat, Ford and Chevy have recently launched high-profile, track-ready sports cars. And thanks to a new video by Speed Phenom, we now know how they directly compare on track.
Naturally, we wanted to do this comparison ourselves. But the GT500 wasn’t ready during our Performance Car of the Year competition when we had an early C8 to test. And now that both cars are on sale, stay-at-home orders and track closures mean we’ll have to wait for an opportunity to do a full R&T comparison.
In the meantime, Speed Phenom does a good job of breaking down how they perform. With the caveat that he’s got a base model GT500 without the optional Pilot Sport Cup 2 tires, he notes that the car struggles for grip more often than the similarly-tired Corvette. It’s also less composed through mid-corner bumps, with slower cornering all around. Thanks to its massive horsepower advantage, though, it jets through straightaways.
The C8, meanwhile, benefits from serious mechanical grip. The better-balanced midship car fires through corners and has no problem putting its power down. That makes it more approachable, not surprising given that it’s the tamest version of the C8 while the GT500 is stretching the limits of the S550 platform. We’re sure to see more track-ready Corvettes soon, but for now the Stingray is a surprisingly capable start.
Mack Hogan- Road&Track
Some fans complain that race cars don’t have much in common with road vehicles, but that wasn’t a priority in the 1970s. Loose regulations in the period allowed teams to erase nearly all road-car DNA as they searched for greater performance. This 1977 Chevrolet Corvette, dubbed the “SuperVette,” is an example of the era’s excesses.
Offered for sale by noted Porsche 959 restorer Canepa, the SuperVette was built to take advantage of a rule change in IMSA road racing. In 1976, the sanctioning body allowed full tube-frame cars to compete in its top-level series. Corvette racer John Greenwood saw this as an opportunity to build a more competitive car, and teamed up with designer Bob Reilly to make a tube-frame Corvette. This Corvette—COV002—is one of two chassis completed in 1977.
This car has almost nothing in common with a stock 1977 Corvette, which is a good thing because Corvettes offered very little performance at the timie. Underneath the swollen bodywork is a chassis and roll cage made from 2.0-inch chrome-moly tubing. Its bulging hood hides an aluminum 500-cubic-inch big-block V-8, making more than 750 horsepower. It was built by Don Nichols, whose Shadow Racing team competed in Formula 1, Can-Am, and F5000. The engine is harnessed to a Jerico 4-speed manual transmission.
COV002 was bought by John Paul, Sr. for the 1978 season. Paul raced with his son, John Paul, Jr., and both were later convicted for running an illegal marijuana trafficking operation. It was a different time, for sure.
It was the elder Paul who specified the Nichols-built engine, rather than one built by Greenwood. In an effort to reduce drag, the car also got a narrower track and more aerodynamic bodywork than its sibling.
Paul raced the ‘Vette during the 1978 IMSA season in the GTX class, primarily competing against Porsche 935s. The car earned two podiums that year. After that, it was sold but continued to race through the 1982 season. After retirement, the car changed hands a few more times before being bought by Canepa.
The Corvette has been restored to its 1978 racing specifications, and is currently eligible for to compete in vintage racing, according to Canepa. The seller didn’t list a price, but we don’t expect a car with this pedigree to sell cheap.
Stephen Edelstein for Motor Authority
Even off the pavement, the new ‘Vette is a rocket ship.
The 2020 C8 Chevy Corvette is a fast car. In base form, it can hit a staggering 194 mph flat-out. Even with the drag-inducing Z51 performance package, the car can still do 184. Hennessey Performance took theirs to 182 mph with ease before they turbocharged it to oblivion. Now, there’s another C8 top-speed run on the internet, and this time, it takes place on a dry lake bed.
Popular YouTube TheStradman took his new Z51-equipped Corvette to a dry lake bed in Utah to test out the top speed of the car. He managed to hit an impressive 173 mph before slowing down—not bad considering the uneven and bumpy surface. It helps that there’s absolutely nothing for miles in either direction. In fact, from inside the cabin, it looks a bit uneventful. Here’s a perspective from outside the car to give you a sense of how fast 173 mph is:
If the base Corvette is this quick right out of the box, we’re curious to see how the upcoming Z06 stacks up. Considering the last-gen car could hit 200 mph, we’re expecting big things.
Source: Brian Silvestro; for RoadandTrack
The Goldilocks zone of Corvette C8 interiors?
By now, you should know that Chevrolet has started deliveries of the mid-engine 2020 Corvette. Lucky owners of the ‘Vette C8 are starting to receive their newest toy and most likely you’ve already seen one on the streets – that’s if the state you’re in is not affected by the coronavirus lockdown.
If you’re among those who are planning to purchase the new Corvette but are undecided with the trim level to choose, this video might be able to help you – especially if you’re particular with a car’s interior.
The Corvette C8 comes with three trim levels: 1LT, 2LT, and 3LT. The differences lie mainly in the features offered on each trim level, which defines that the cabin will look and feel like. That’s pretty important, considering that we spend so much time inside the car rather than staring at our investment from a distance. So, here’s a little guide.
The base 1LT trim isn’t really basic. With the entry-level trim, you already get the GT1 seats wrapped in mulan leather, a customizable 12-inch gauge cluster, push-button ignition and keyless entry, and an 8-inch Chevy MyLink infotainment system with Apple CarPlay and Android Auto, 4G LTE Wi-Fi, and 10-speaker Bose sound system. The Corvette 1LT trim is available in three color options: black, gray, or red.
Going up the 2LT trim gives you more interior color options plus features like a rearview camera mirror, a colored head-up display, heated/cooled seats, heated steering wheel, advanced blind-spot monitor, and rear cross-traffic warning. The infotainment gets upgraded as well with a wireless charger and a 14-speaker Boss audio system.
Finally, the 3LT trim dials up the ante by adding a premium Nappa leather with suede microfiber accents – all in combination with the GT2 seats that have more bolsters. These seem not a lot but the range-topping trim adds luxury to the sports coupe.
If you’re still undecided, watch the 2LT interior review on top of this page to check whether you need to take it down a notch to 1LT or go all out on the top-level 3LT.
Source: HorsePower Obsessed
It took 30 hours for Hennessey Performance Engineering to tear apart a new 2020 Chevrolet Corvette, install twin-turbo setup, and put it back together.
It’s no surprise, then, that the twin-turbo C8 Corvette isn’t ready to be sold to customers. The engine lacks intercoolers and Hennessey hasn’t cracked the code of GM’s new electrical architecture to reprogram the ECU.
“This is just the beginning, our own car, doing R&D,” company founder and CEO John Hennessey told Motor Authority.
On Monday, the engine made 643 horsepower and 570 pound-feet of torque at the wheels on a Dynojet dyno while running just 5 psi of boost. That compares to baseline testing HPE performed on the stock car which revealed 466 hp and 451 lb-ft of torque. HPE plans to offer a 1,200-hp version of the C8, which Hennessey said could make 18-20 psi of boost.
Hennessey took delivery of an orange C8 Corvette in Detroit on March 13. He and his daughter, Emma, drove back to the performance outfitter’s Texas headquarters and performed baseline testing before the Hennessey team tore apart the car.
The orange C8 fired back to life on Friday with twin 62-mm Precision Turbos and twin blow-off valves connected to the throttle body mounted behind the catalytic converters. Both turbos are oil-cooled with twin scavenge pumps that feed back into the motor.
The system is not intercooled. Instead, there’s a methanol injection setup to keep things from getting too hot. HPE is considering where to put intercoolers. The current packaging has limited space for intercoolers without cutting into trunk space, which Hennessey does not want to do. 2020 Chevrolet Corvette Stingray undergoes twin-turbo conversion at Hennessey
Hennessey told Motor Authority his team currently can’t tune the factory ECU, but it is looking at aftermarket solutions for the engine management system. He noted it took a year for solutions to come to market for the C7 and added, “hopefully, it won’t take a year.”
Hennessey said when the turbocharged C8 was first started it didn’t throw any codes, errors, or a check engine light. “The computer seems happy with the turbos,” Hennessey noted. A check engine light did appear when the front wheel speed sensors were disconnected to put the car on the dyno, Hennessey said.
The orange C8 will used for R&D of upcoming modifications. Hennessey said he doesn’t expect to deliver modified customer C8s for at least six months, and all will have intercoolers and full plumbing.
Joel Feder for Motor Authority
Did you see the two race on YouTube? We’ve tested them, too; here’s why the results were no surprise.
- We have tested both the 2020 Chevrolet Corvette (11.2 seconds at 122 mph) and the 2020 Ford Mustang Shelby GT500 (11.4 seconds at 132 mph) in the quarter-mile.
- A video on YouTube, however, shows flipped results: 11.5 seconds at 120 mph for the Corvette and 10.8 seconds at 132 mph for the GT500.
- As always, the driver and track conditions are critical, and our two-run average is far more repeatable than any one-off run at a drag strip.
When we tested Ford’s new 2020 Mustang Shelby GT500 against the top-dog 2020 Chevrolet Camaro ZL1 1LE, the Mustang came out on top on the drag strip. But how does the front-engine Shelby stack up against the other, now mid-engine, threat from Chevy?
Greg PajoCar and Driver
During our testing, the GT500 hurtled through the quarter-mile in 11.4 seconds at 132 mph. But that was on a regular street-like surface, not a sticky, prepped drag strip. We struggled mightily with traction at launch, and our best run was with the launch control set to the lowest rpm allowed (1200 rpm) to prevent igniting a rear-tire fire. However, no surprise: with more traction far, better numbers are possible, and we’ve seen numbers below 11 seconds at drag strips, including this kid, who ran a 10.665 shortly after he acquired the car.’Murica Which Ultimate Pony Car Is the 1/4-Mile King?This Kid Ran a 10.66 Quarter Mile In His GT500
On the other hand, the 2020 Corvette has far fewer launch struggles, as it benefits from its newly acquired mid-engine layout and rear weight bias. Moving the weight distribution rearward improves launch traction, helping it jump off the line much quicker. During our testing, and despite far less horsepower, the mid-engine Vette outaccelerated the GT500 through the quarter-mile by two tenths of a second, reaching it in 11.2 seconds at 122 mph.Advertisement – Continue Reading Below
We’re starting to see other people’s numbers from both of these cars, though, as customers are starting to take deliveries of their C8 Corvettes and GT500s. Contrary to our test results, there’s a video circulating on YouTube that shows the new GT500 beating the C8 Corvette through the quarter-mile by seven-tenths of a second. It raced to the quarter-mile in 10.8 seconds while the Corvette reached it in 11.5 seconds.
Keep in mind that the driver and conditions are huge factors in quarter-mile and acceleration results. We suspect that here, the Corvette likely got bogged down on the high-grip surface, as the launch control isn’t optimized for those conditions, and the 760-hp Mustang benefited from the extra traction on the track.
Connor Hoffman for CarandDriver
William Walker: Photographer Manufacturer Photographer Mar 11, 2020
It’s weird to say, but immediately after my first test drive in the new mid-engine, eighth-generation 2020 Chevrolet C8 Corvette, I was angry. Angry not because the car didn’t do what it should, but precisely because it did everything I asked of it, and did it beautifully—and I’d been led to believe it was a hot, understeering mess by the reviews I’d read elsewhere. How could they all have been so wildly off base?
There are many possible explanations, of course—differing driver skill levels, evaluation methods, and conditions. But two variables stand out among the rest: the C8 Corvette’s option for track or street alignments, and the length of exposure to the car. Addressing the latter issue first, we were lucky enough to spend the better part of week with the new C8, a rare chance given the limited availability of test cars so early in the Corvette’s production (All-Stars testing took place in early December 2019). That greater exposure to the car allowed us more time to get a feel for its behavior in a wide array of situations, both on the road and on the Streets of Willow Springs racetrack.
Perhaps even more importantly, however, was the choice of track and street suspension alignments. You see, the 2020 C8 Corvette has two official specifications for its alignment settings; the street alignment sets the camber at 0 degrees, while the track alignment sets the camber to 3 degrees negative. The result is the difference between a (somewhat) understeer-biased street setup and a balanced, ready-to-rotate super sports car. The former is intended to help Corvette owners new to the world of low polar-moment mid-engine cars make the transition without ending up backward in a guardrail their first time out. We spent our week with the Corvette in track-alignment mode, whether hammering out laps or zooming around the mountains near Lake Hughes.
But wait, isn’t that cheating, you ask? It might seem like it at first—track settings are meant for the track, not the street, right?–but Chevrolet itself recommends owners who use the track setting for track go ahead and leave the car setup that way all the time. No, it won’t cause excessive or premature tire wear, at least according to Chevy’s engineers. For the record, we did visually notice more wear to the front tires’ inside shoulders than we’d expect with the more conventional setup, so we’d be curious to see the state of the rubber after 5,000 or so miles with this alignment. It’s certainly something for owners to be aware of and to keep an eye on, at the very least.
Regardless, and not for nothing, the two alignment settings might better be named “beginner” and “advanced”. If you’re a moderately accomplished driver who’s comfortable with a car that’s willing to rotate, don’t leave the lot with your new Corvette until you’ve had the car set to its more aggressive alignment.
With that out of the way, holy cow, is this thing good! The nearly instant-on torque from the 6.2-liter V-8 means you’re never left wanting for thrust, the quick-shifting eight-speed dual-clutch transmission bangs out upshifts with authority, and the steering feel, while not telepathic, is still abundantly communicative. Detroit bureau chief Todd Lassa did note, however, that several of our evaluators found “the steering in its own separate Track mode is too heavy without doing anything for feel,” and resident professional race driver Andy Pilgrim pointed out, “The gearbox is very good on the street, but did not always give me the lower gear I wanted on the track.” If those are the worst things we could think to say after back-to-back runs in hardware as exotic as the $474,000-plus Ferrari F8 Tributo and the nearly as pricey McLaren GT, it’s pretty apparent the mid-engine Corvette is something special.
Braking is remarkably stable for a mid-engine car, as is power application, the latter thanks at least in part to the car’s Performance Traction Management system. Chevy’s PTM is one of the key technology transfers from the factory Corvette Racing program, and it shows its racing roots when put to the test. But of course even the best traction-control programs can’t work when the tires aren’t in contact with the road; that’s where the Corvette’s excellent suspension tune comes in.
“Glides over broken mountain roads like a hovercraft—but still sticks like crazy,” wrote contributor Arthur St. Antoine in his evaluation notes. Pilgrim agreed, noting the C8 Corvette “has more suspension travel than the Porsche 992, and feels more compliant, allowing more roll in transition; none of which is a bad thing for everyday driving comfort.”
In fact, far from a rabid, on-the-edge supercar, it’s clear the Chevy engineers behind the new C8 Corvette put a great deal of time and effort into the car’s daily driving demeanor, or, as features editor Rory Jurnecka noted, “It should make a nice road car with good interior space. Feels pretty easy to live with.” Not only is there a rear trunk that’ll fit two golf bags (or several carry-on bags or backpacks), there’s a front trunk (or frunk) that’ll hold some more. But the new C8 Corvette’s interior is what truly stands out in terms of daily comfort, especially in comparison to previous Corvettes.
“When I took the C8 on the road trip between the hotel and the winners’ shoot location, I was blown away at how good of a GT car it is,” social media editor Billy Rehbock said. “I put on the cooled seats, played music over the crystal-clear sound system, and rolled in complete comfort. My only complaint was that it was actually a bit quiet, even when being driven hard, but subsequent performance versions will fix that, no doubt.”
Beyond even the excellent interior feature set (though the verdict is still out on the extra-long button strip in the center console), the most notable and immediately noticeable upgrade to the C8 Corvette’s interior is the massive improvement of materials and build quality over previous generations. Our test car’s 3LT interior trim specification included Chevy’s upgraded infotainment system, a 14-speaker Bose audio system, and a head-up display. And in addition to the upgraded materials, it featured extended leather surface treatments, and GT2 bucket seats—though ours swapped the GT2 seats for “competition sport bucket” seats for an extra $500); the 3LT spec added $11,950 to the car’s $59,995 base price. Tack that cash onto the additional list of optional extras like the Z51 performance package ($5,000), magnetic ride control suspension system ($1,895), front lift system ($1,495), upgraded 19-inch front/20-inch rear wheels and tires ($1,495), and engine appearance package ($995), among others. Total price, as configured: a surprisingly reasonable $83,825.
Admittedly, this was a pre-production car, but it was also one of just a handful of streetable C8 Corvettes available at the time, meaning it had already lived a rather hard life before our testing even began. Sitting in the C8 back-to-back with the Ferrari F8, the Italian doesn’t come off as insanely luxurious or refined—and the F8’s interior is already perfectly lovely.
It’s no revelation that the 2020 Chevrolet C8 Corvette is a great performance value; the Corvette has been that way for decades. But for Chevy to have done such an impressive job on its first go with the engine behind the driver, and to have included so many improvements to the luxury and quality of the C8, all for a price that’s a fraction of the cars with which it competes, it’s easy to see why I was so angry after experiencing the car for myself—and it’s hard not to agree with Jurnecka when he says, “So glad this car is what I’d hoped for. Worth the wait.”
Nelson Ireson for Automobile
All-new 2020 Chevrolet Corvette is now on sale, and buyers are lining up
With deliveries of the all-new 2020 Chevrolet Corvette beginning this month we know there are a lot of very excited Corvette buyers out there who are just now getting familiar with Chevrolet’s newest sports car. What drove those shoppers to the new eighth generation Corvette C8, and what are they likely discovering as their ownership experience begins?
We’ve been fortunate to drive the new Corvette on multiple occasions, on both public roads and at a closed course race facility. This has given us sufficient seat time to understand the 2020 Chevrolet Corvette’s upgraded design cues and capabilities. We could make a nearly endless list of why people want the new Corvette, but here are the top 10 reasons we think new, and prospective, Corvette buyers are lining up to sample Chevrolet’s latest supercar.
- Zero-to-60 Performance: The 2020 Chevrolet Corvette’s “base” 6.2-liter V8 engine makes 490 horsepower and 465 pound-feet of torque. That’s enough power and twisting force to catapult the Corvette to 60 mph in 3 second flat. Spring for the $5,000 Z51 performance package, with 495 hp and 470 lb-ft, plus more effective engine cooling, more advanced brake and suspension components, stickier Michelin Pilot Sport 4S tires, along with aerodynamic enhancements, and the Corvette can hit 60 mph in 2.8 seconds.
- Exceptional Value: The 2020 Corvette starts at a meager $59,995, including delivery charges. Once again, that price includes a zero-to-60 time of 3 seconds flat, making the new Corvette not only one of the quickest street-legal cars you can buy, but one of only a very few cars capable of hitting those numbers for less than $100,000. The Corvette has always offered exceptional “bang-for-the-buck” performance specs. The C8 takes this longstanding Corvette tradition to new dimension.
- Top Speed=194 MPH: Not that we endorse going almost 200 mph in any vehicle, and certainly never on a public road. But – IF you have a safe, closed course facility to do it – the Corvette can indeed hit 194 mph. That’s in base form, at the $59,995 starting price. Pro tip: ordering the Z51 performance package actually reduces the car’s top speed even at it improves the Corvette’s zero-to-60 time. The Z51’s aggressive aerodynamics increase downforce, but the added drag reduces top speed to “just” 184 mph.
- 8-Speed Dual Clutch Transmission: Unlike a traditional manual transmission (which is not offered on the new Chevrolet Corvette), a dual-clutch transmission (DCT) has the benefit of keeping the rear wheels connected to the engine, even while shifting The “dual” in dual clutch means the incoming gear is engaged even before the outgoing gear is disengaged. This makes for shifts in under 100 milliseconds, far quicker than a human. The transmission’s design and placement also lowers the Corvette’s center of gravity.
- Magnetic Selective Ride Control: General Motors perfected this advanced active suspension technology years ago. How perfect? Ferrari licenses the use of this tech from GM for its own cars. When buyers equip the new Corvette with the FE4 $1,895 option they’ll have multiple driving modes, including Tour, Sport and Track. This enables a smooth, comfortable ride during relaxed driving conditions or track-ready stiffness when driving a 2020 Corvette on a closed course. It’s the definition of the “best of both worlds”.
- Cargo Capacity: A sports car with functional cargo capacity is relatively rare, and a 3-second sports car with 13 cubic feet of cargo capacity is unheard of…until now. The new Corvette has adequate space behind the engine to fit two full sets of golf clubs, while a front trunk, under the hood, can swallow a large carry-on bag with room leftover. We’re not sure how often Corvette owners actually pick up a buddy to hit the links, but for those that do, the 2020 Corvette is ready and willing, with cargo space to spare.
- Fuel Efficiency: Yet another longstanding Corvette character trait that continues in the new Corvette. Between the car’s slippery shape, torque-laden engine and 8-speed transmission there’s the potential for very little energy expenditure while cruising at a steady highway speed…assuming the driver’s goes light on the throttle. If he does, the new Corvette can deliver between 25 and 30 mpg.
- Driver-Focused Cabin: Everything from the squared-off steering wheel to the 12-inch, reconfigurable gauge cluster to the driver-angled 8-inch touchscreen confirms the Corvette’s performance-oriented purpose. The smaller front-end provides excellent forward visibility, which adds to driver confidence when navigating corners, and all three seats options provide excellent lateral support while remaining comfortable for long drives. The days of disappointing Corvette cabins are finally in the rearview mirror.
- Open Air Cruising: The new Corvette comes as a coupe or convertible, but even in coupe form the Corvette’s roof panel is easily removed and securely stored in the rear cargo area. The convertible uses a retractable hardtop design, the first in Corvette history, that folds away in 16 seconds at speeds up to 30 mph. Powered by electric motors, the Corvette convertible offers the same coefficient of drag as the coupe, with two cool nacelles behind each seat to smooth airflow at higher speeds.
- So Many Options: Almost as exciting as the new Corvette’s performance and value is the car’s range of personalization. The option list long, and can’t be remotely covered in this top 10 list. So head over to the Corvette Configurator and play with exterior colors, interior colors, stripe designs, seat designs, wheel designs, performance upgrades and exterior accents to your heart’s desire. But be prepared to spend quite a long time there. And don’t say we didn’t warn you.
Karl Brauer for Forbes
Mike Stapley, KSL.com Contributor
By Mike Stapley, KSL.com Contributor | Posted – Mar. 4, 2020 at 2:32 p.m.
AMERICAN FORK — The Chevrolet Corvette had humble beginnings.
In 1953, only 300 were produced with fewer than 200 sold. With only 150 horsepower, the car failed to move fans of more lively British roadsters and refined American sedans.
A couple of years later, the original V-6 engine gave way to a more powerful V-8, and the Corvette began to find its way. The 1956 model brought styling changes and additional horsepower that laid the groundwork for what would become America’s sports car.
The second-generation car, dubbed C2, debuted in 1963 and offered a coupe option for the first time. That same year, the Sting Ray moniker made its mark, and Chevy began offering its first production racing model Z06 with 360 horsepower.
In 1965, Chevy made its big-block 425 horsepower V-8 available in the Corvette. The C3 (called the Sharknado for its unique design) was released just a few years later. According to true aficionados, the modern Corvette originates with the C3, since Chevy eliminated any true rear storage area and debuted a Targa-style removable roof panel.
In 2020, the Corvette will experience its most stunning transformation to date and become a mid-engine supercar, sharing a powertrain layout with European competitors for the first time ever.
Despite its rich history and reputation for power, the Corvette has been subjected to a messy, mixed reputation among car enthusiasts. America’s sports car is often viewed as a value offering for middle-aged drivers, and stories abound of Corvette engineers feeling limited in their offerings.
With the new car entering production, there is no better time to pay homage to the outgoing C7, which changed the Corvette’s reputation for the better. The 2019 Grand Sport model combines the power and value of the Sting Ray with Z06 styling.
“The Grand Sport has long been the best value in the sports car world. You simply can’t match what’s available, dollar for dollar, anywhere in the world,” said Zach Madsen, fleet sales manager for Ken Garff Chevrolet in American Fork.
The Grand Sport model offers the body kit and downforce stylings of the top-end Z06, and the car is stunning from almost every angle. The fastback-style roofline meets massive rear fenders that blend and create a rear end that makes the Corvette seem much larger than it is. When parked next to other cars, the ‘Vette’s true size becomes quickly apparent.
There is no mistaking this car for another from behind. The traditional quad lens taillights flank the huge Corvette emblem on the rear, and all four exhaust outlets are located at the center of the rear bumper rather than split among each side.
The Z06 rear deck spoiler is tall enough to require an opening in the center so the driver can see behind. The rear fenders are squared off more than prior generations, but the front fenders still provide a sweeping arc that screams Corvette. Large front fender air vents provide color contrast and sport the Grand Sport logo.
From the front, the hoodline rakes down sharply, stretching elongated headlight housings on either side. A black hood vent down the center and a three-tiered front splitter provide color contrast and make it seem like the car is floating just barely above the ground.
The ‘Vette’s best attribute, and my most pleasant surprise, is the handling. The beefier body and chassis of the Z06 is present on the Grand Sport, and buyers can choose the even beefier Z07 suspension package.
The word “compromise” has always been part of Corvette lore, and I didn’t anticipate a car that felt confident on nearly every road I threw at it. The C7 is a capable track car and most track-capable cars don’t make the transition well to the mean, uneven, pothole-filled streets of America.
I’ve been disappointed by some of the best cars in the world, where even the seams of an elevated canyon road can throw them every which way. The C7 Grand Sport, in my humble opinion, is only bested in this area by the Porsche 911. It’s a bold statement, but I stand by it.
The lore of “compromise” is true inside the Corvette, though. It isn’t fair, of course, to compare the interior of a sub $80,000 car to those of cars costing three and four times as much. It’s difficult not to, though, when Corvette competes for buyers with those cars from Italy and Germany.
There’s no doubt the interior is much improved over the prior C6 generation: nothing about the fit, finish and quality of the materials stands out as subpar. At the same time, nothing stood out as exceptional or distinctive from any Cadillac or Denali on the road. In a car like this, something should.
The two-tone dash layout is nice, and the cockpit-like feel of the driver’s seat is unrivaled. The entire center console pushes out toward the driver and ends on the lower passenger side with a grab handle for wary riders. The passengers will also find their separate climate and heated/cooled seat controls built into the passenger vent itself — a nice and convenient touch.
But Corvette tech is a mixed bag.
The heads-up display is excellent and adjustable to provide a wide range of information, and the center touch screen reveals a James Bond-like secret storage bin when lowered mechanically.
GM has an excellent MyLink infotainment system, but the Corvette seems to have been given a lesser model — though, the Bose sound system is superb. Perhaps the intent was to “enhance” the display so it would stand out from Chevy’s other offerings, but the result is a mess of poor layout and overlapping controls.
Fortunately, both Apple Carplay and Android Auto are available to rescue it.
I might lose some Corvette fans by saying this, but hear me out. The powertrain is excellent but left me wanting more.
While the Grand Sport borrows from the upper-end Z06 in terms of appearance and handling, it also borrows the engine and transmission from the base model Sting Ray. The 6.2-liter LT1 V-8 provides 460 horsepower and 465 pound-feet of torque and moves the ‘Vette from zero to 60 in 3.7 seconds with the smooth eight-speed automatic.
It’s quick, it’s gloriously loud at startup, and yet, it left me feeling like the experience was less than spectacular. Perhaps the C7 is a bit too refined for its own good. Perhaps Corvette engineers have favored the stereotypical mid-life buyer a little too much.
The glorious sound loses some luster at highway speeds. The G-forces are clearly there when moving that quickly, but they aren’t felt the way one would expect. The engine lacks initial “oompf” but makes up for it while the transmission spins through the gears in a way that seems impossible. The paddle shifters added some fun, and I’m curious whether the seven-speed manual transmission would “un-tame” the beast in the way I would want.
Don’t get me wrong, I prefer the Corvette to the wonky, jolting shift pattern of an Aston, and the handling more than makes up for any ethereal shortcomings. Best of all, it’s the first sports car I’ve brought home that my wife actually enjoyed riding in. She paid it high praise one evening with the light Targa top removed and actually said she could get used to this one.
In the end, the Corvette left me very impressed and quelled the mythical shortcomings that preceded it.
I doubt many potential Corvette buyers care, but the EPA fuel economy comes in at 19 combined mpg, aided by a less than 3,300-pound weight. The manufacturer’s suggested retail price for this car, as tested, was $77,840.
Source: Mike Stapley; KSL
And also what you don’t get
Although we test hundreds of cars every year, we rarely get to take a look at base trims—especially when it comes to supercars. But during the media launch of the 2020 Chevrolet Corvette C8 last week, we were able to see the much hyped $59,995 model, and we got a chance to sit in it and see how the materials compare with the car we evaluated last year and ultimately named our 2020 Car of the Year. We didn’t drive the $60K model, but we got to drive a non-Z51 Corvette C8 for the first time, which was very similar to the base car. We were impressed to see the long list of standard equipment on the base model and appreciated how there are almost no compromises with its performance. Here’s an overview of what you get when you buy the cheapest C8 Corvette model in the lineup.
You buy a Corvette because you care about driving, and the C8 delivers on that front. That’s one of the reasons we named it Car of the Year. And even on the $60,000 car, you still get a lot for your money. The 6.2-liter V-8 engine produces 490 hp and 465 lb-ft of torque, which is 5 hp and 5 lb-ft less than what you get with the optional performance exhaust. Just like on the higher trims, an eight-speed dual-clutch transmission sends power to the rear wheels. Four-piston Brembo brakes are also standard, so you’ll get that hard stopping power when you need to. And you still get the mechanical limited-slip differential.
Non-Z51 C8 Corvettes ride on all-season tires, so this was our first time driving the car with the Michelin Pilot Sport all-seasons and the standard suspension. The ride is a little stiffer with this setup, but it still continues to be comfortable on the road. You’ll have to drive the Z51 and regular models back to back to notice the difference. The standard suspension is also very competent, though I still prefer the optional magnetic Ride Control adaptive damping system, which adjusts every millisecond to the road surfaces and rides more comfortably than the base suspension when set to Tour mode (driving modes are still offered even without the MR shocks on the base C8).
There’s no doubt about it—the C8’s interior design is just as good as (or perhaps even better than) its exterior design. You’ll note that the biggest difference between the 1LT (base) and 3LT (top trim) is on the dashboard, where the absence of leather is notable. But even then, you’re still getting a lot of standard equipment. The dash still has a premium feel, and you still get the contrast stitching throughout the cabin. You also get a lot of leather in the standard interior. The seats and steering wheel are wrapped in leather and you don’t really see any hard plastics (except where the wireless charger is located, which you can’t get on the base trim). You don’t get the suede headliner, but the standard fabric headliner is pretty decent.
The 8.0-inch touchscreen with Apple CarPlay and Android Auto is standard on the Corvette C8, so you don’t lose any major technology. What you don’t get is the Performance Data Recorder (PDR), which is able to record the view of the front camera along with the speed and g force readings when you’re on a track. The reason you don’t get the PDR is because the base C8 doesn’t come with the front camera. You’ll miss that feature when parking as the display automatically shows the camera view when you’re approaching a curb block or other potentially front end-scraping object. Another pro is the 10-speaker Bose audio system, which sounds crisp and will have you rockin’ and rollin’ wherever you go.
Although it’s weird not to see them on a $60,000 car, blind-spot monitor and rear-cross traffic alert are not included on the base C8. Those are part of the 2LT package, which increases the price by more than $7,000.
Although you might not get some safety features, there’s a long list of convenience features that come at no extra charge. Keyless access with push-button start, dual-zone climate control, power adjustable GT1 bucket seats, automatic LED headlights, and a 12.0-inch digital cluster display are standard on the base C8. The removable roof panel is also standard, so every C8 can be driven topless.
Miguel Cortina for Motor Trend
As we continue to digest all the new information that came out of last week’s First Drive Event with the 2020 Corvette Stingrays in Las Vegas, there is a new “Mode” to discuss that most Corvette enthusiasts have never heard of.
The 2020 Corvette Stingray has several “modes” that help drivers get the most out of their cars. We are already familiar with the regular driving modes that feature settings for Weather, Touring, Sport and Track, as well as the two customizable modes called MyMode and Z-Mode. But what you may not be aware of is that the 2020 Corvette Stingray’s equipped with Magnetic Ride Control also features a “Flying Car” mode.
Well, it is the 21st century after all!
Corvette’s Vehicle Performance Manager Alex MacDonald is responsible for the chassis tuning of the new Corvette and he was tasked with explaining much of the on-track performance capabilities of the new Corvette to those at Spring Mountain last week.
For the C8 Corvette, engineers have rolled out version 4.0 of Magnetic Ride Control with the biggest change to the system is the use of accelerometers rather than position sensors that measured wheel height. Here is the slide that was offered on the new Mag Ride for the C8 Corvette:
The Magnetic Ride Control is tied into the Corvette’s Performance Traction Management system and that’s where the Flying Car Mode comes into play.
When your crest an incline and the Corvette’s wheels are off the ground, they will spin faster like they are on ice or another slippery surface because there is no resistance. The performance traction control senses that and sends commands to slow the wheels. But that’s not the best reaction when on the track. The system now senses when the car’s front wheels leave the ground (and assumes that the rears will be leaving as well), and the system tells the performance traction control to ignore it because it knows that it’s temporary and that all four wheels will be back on the ground momentarily.
Here is Alex talking about the Flying Car Mode:
“The other interesting note about MR is that it communicates with the performance traction system and it tells that performance traction system that if the front wheels have just gone over a big crest that we know that one wheel-base later the rear is about to go over that same crest, we can adapt the traction control to work in that situation and we call that Flying Car Mode, which is a cool name for it, because it does detect when the car is airborne and we can alter the chassis controls to deal what happens when the car lands.”
Video by Keith Cornett
The Corvette Owner’s School at the Ron Fellows Performance Driving School will officially kick off its new program for the mid-engine 2020 Corvette with the first classes to start in April. And once again, Chevrolet is offering huge savings on the enhanced two-day program for just $1,000.
This announcement comes from Spring Mountain Motor Resort and Country Club, home of the Ron Fellows Performance Driving School.
“We are thrilled to be able to continue our relationship with Chevrolet and Ron Fellows here at our world-class facility. There has been an incredible buzz around the 8th generation Corvette, and what better way to kick off 2020 and our twelfth year of the school, with the all-new mid-engine Corvette,” said John Morris, CEO and co-owner of Spring Mountain.
The new C8 Corvette program features a two-day curriculum designed to provide drivers of all experience levels the skills and techniques of performance driving. You will experience both classroom and on-track driving instruction in a manner that builds upon your skills and increases your confidence with each session. You will come away from the Spring Mountain experience more knowledgeable and confident in the incredible capabilities of the 2020 Corvette.
Located just 55 miles from downtown Las Vegas, the Ron Fellows Performance Driving School offers some of the most fun you can have in a Corvette. Tuition for the two-day class is only $1,000 and includes a one-night stay in one of Spring Mountain’s luxurious condominiums. Enjoy access to the clubhouse for meals and drinks with breakfast and lunch prepared by Spring Mountain’s onsite chef.
“Our entire team here at Spring Mountain are incredibly excited about the 8th generation Corvette and cannot wait to get the new Owners School program started. I know that everyone responsible for the day-to-day operations of our school are really looking forward to providing our outstanding service and a great overall experience showcasing the next-level engineering of the new mid-engine Corvette,” said Ron Fellows, charter member of Corvette Racing and co-founder of his school at Spring Mountain.
To book your C8 Corvette Owners School, Call 800 391-6891 or view online at www.CorvetteOwnersSchool.com
Check out this photo gallery from Spring Mountain featuring the 2020 Corvette Stingray Z51 Coupes on the track!
Source: Corvette Blogger
From an acclaimed concept car John DeLorean reportedly dismissed because he wanted something “smaller and more European,” to the design that ended a feud between a pair of GM giants — but may have set the Corvette back decades — a trove of unique documents, sketches and models tells a secret history of the 60-year quest to build a mid engine Chevrolet Corvette.
The story begins in the late 1950s with legendary Corvette chief engineer Zora Arkus-Duntov and came to fruition when the first mid engine 2020 Corvette Stingray sold for $3 million at auction in January.
Titled “The Vision Realized: 60 Years of Mid engine Corvette Design” and created by GM Design Archive & Collections, the exhibit included 19 original sketches by designers including Larry Shinoda and Tom Peters, the massive 4-Rotor rotary engine from the 1973 Aerovette engineering, a wood wind-tunnel model, even letters from Arkus-Duntov’s personal files.
“The story of the mid engine Corvette is incredibly complicated, full of fits and starts,” said Christo Datini, manager of the GM Design Archive & Collections.
Cristo Datini at the General Motors Warren Technical Center in Warren, Michigan on Friday, January, 31, 2020 (Photo: Eric Seals, Detroit Free Press)
A mid engine Corvette was a dream shared by GM designers and engineers. The layout, in which the engine is behind the passenger compartment and immediately over the rear wheels, improves acceleration and handling. It’s been a mainstay at Ferrari for decades, and inspired repeated design and engineering projects at GM. None of them made it to production till now, largely because the Corvette’s original front-engine layout was so successful.
“Why would we change the Corvette?” GM chairman and CEO Richard Gerstenberg said to Arkus-Duntov before both men retired in the mid-1970s. “We sell every one we can make.”
‘Design without limit’
A generation of GM designers and engineers had already fought that attitude toward the sports car that debuted in 1953 model, and a couple more would before the midengine eighth-generation C8 Corvette Stingray debuted last year.
The exhibition included dozens of sketches, models, photos and documents.
“Our mission is to preserve the heritage of GM Design and educate our designers on GM’s prominence in the world of design,” Datini said. The archive also is working with the Detroit Institute of Arts on a massive exhibition dedicated to automotive design that opens this summer.
The Corvette exhibition closed at the end of January, but elements of it are likely to be displayed at other events and locations, possibly including the National Corvette Museum in Bowling Green, Kentucky, which provided materials for the collection.
Original magazines with drawings of what Corvettes could have looked like on display at the General Motors Warren Technical Center in Warren, Michigan on Friday, January, 31, 2020 (Photo: Eric Seals, Detroit Free Press)
Chevrolet Engineering Research Vehicle I, Also called SERV I and XP-708, was the beginning. A running model that debuted in 1960, the car had the looks of an Indy car and a chassis that tested what a midengine layout could do. It was “a design without limit” and an “admirable tool” to help Chevy figure out “what to put in Corvette,” said Duntov, himself a former driver in the 24 Hours of Le Mans sports car race.
CERV I was used as a test vehicle for years. Larry Shinoda, who would go on to be known as the father of the ’63 Corvette Stingray and the Mako Shark concept car, tweaked its design repeatedly as engineers tested it with seven different power trains.
GM eventually retired CERV I, selling it to the Briggs Cunningham Automotive Museum for $1. When the museum failed in the 1980s, GM bought it back for “somewhat more,” Datini said.
A model of the 1968 Chevrolet mid-engine Corvette Roadster that is one of many items for General Motors workers to see at the Corvette design display at the General Motors Warren Technical Center in Warren, Michigan on Friday, January, 31, 2020 (Photo: Eric Seals, Detroit Free Press)
Corvettes the world never saw
Shortly thereafter, Duntov heard rumors Ford was developing a Le Mans racer to challenge Ferrari and launched work on CERV II. GM decided not to race, Ford and Carroll Shelby built the GT40 that inspired “Ford vs. Ferrari,” and the CERV II was used as an engineering test bed at secret proving grounds and never seen by the public during its active lifetime. Built in 1964, CERV II had a 500-horsepower V8, 210-mph top speed and 2.8-second 0-60 mph time.
A picture of the CERV II Corvette. The sports car never went into production but it was influential in the design of the C5 production Corvette. (Photo: Eric Seals, Detroit Free Press)
“By that time, engineers and designers knew a midengine chassis was necessary” to get maximum performance from the ‘Vette, Datini said. Putting the engine behind the passenger compartment puts the car’s weight over the rear wheels to put down more power without spinning. Shifting balance from the production ‘Vette’s nose-heavy weight distribution would also improve handling.
Also in 1964, the XP-819 experimental car was being tested. Designed by Shinoda, it bore a strong resemblance to 1970 Corvettes, but Duntov hated it, calling it an “ugly duckling” at least in part because he wished his engineering team got some of the budget allotted to designing the car. It had a 327 cubic-inch V8 and pop-up headlights.
Like many concept and engineering vehicles, XP-819 was destroyed, chopped up. Years later, the pieces were found in NASCAR designer and mechanic Smokey Yunick’s garage.
Half Corvette, half Porsche
With a name GM would later recycle on a minivan, the Astro II XP-880 was never publicly identified as a Corvette, but it was one, intended for production in 1970, but never got there. It debuted at the New York auto show, featuring a nose, front fenders and Firefrost Blue paint that that foreshadowed 1970s production cars.
DeLorean, then Chevrolet general manager, asked for a rush program to create a different midengine design to match the midengine Pantera Ford was developing with Italian sports car maker De Tomaso to debut at the 1970 New York auto show. The XP-882 had a tapering body with dramatic fender flares and a louvered rear window like the Mako Shark II concept car. Like so many midengine ‘Vettes before and after, GM brass decided to stick with the tried and true front-engine layout.
Also in the 1970s GM president Ed Cole — another legendary engineer who led the development of the small block V8 and catalytic converter, among other achievements — became enamored with the Wankel rotary engine. Duntov built two midengine experimental ‘Vettes with rotary engines, glad for Cole’s support despite not sharing his enthusiasm for the engine.
Sketching and notes about the Corvette, one of the many originals on display for workers to see at the General Motors Warren Technical Center in Warren, Michigan on Friday, January, 31, 2020 (Photo: Eric Seals, Detroit Free Press)
The 1973 Corvette 2-Rotor XP-987GT was a smaller, European-scale sports car with a rotary engine. The body was all Corvette, but its chassis came from a Porsche 914. Italian design house Pininfarina built its body. GM displayed the 2-Rotor at auto shows in Frankfurt and Paris before the car disappeared, probably sold to a collector.
Bill Mitchell’s most beautiful car
At the same time, Duntov wanted to develop a bigger midengine Corvette. He and Cole hadn’t been on speaking terms since Duntov refused an annual bonus he thought was insultingly small. They made up, at least in part because Duntov wanted a budget to develop what would become the Corvette 4-Rotor Aerovette, an iconic, gull wing design. Duntov believed it was the most beautiful vehicle GM design chief Bill Mitchell oversaw in a career that included the ’57 Chevy Bel Air and ’66 Buick Riviera.
Duntov recycled the XP-882’s chassis for the Aerovette, which featured silver leather interior trim.
A picture of the Aerovette featuring bi-fold gulping doors in the sports car that was never made. It is one of many photographs, drawings and sketches on display on all things Corvette design inside the General Motors Warren Technical Center in Warren, Michigan on Friday, January, 31, 2020 (Photo: Eric Seals, Detroit Free Press)
Despite the car’s striking appearance, Duntov would come to believe his agreement to use a rotary engine was a nail in the midengine ‘Vette’s coffin.
Despite that, another midengine engineering car arrived in 1974. The XP-895 began its life with a steel body. Intrigued by the idea of lightweight materials, DeLorean asked Reynolds Aluminum to create an aluminum body. That cut the car’s weight by nearly 40%, but DeLorean pulled the plug on the project because he wanted a smaller, more European design.
That never happened, and design work on midengine ‘Vettes came to a halt for more than a decade, as GM struggled meeting the challenge of higher fuel prices.
Closing the deal
By 1986, the quest for a midengine Corvette was ready to create another giant figure, and it got one when a young designer named Tom Peters began work on the Corvette Indy concept car. Peters went on to become the chief designer of the sixth- and seventh-generation C6 and C7 Corvettes and play a key role in starting work on the 2020 C8.
With a radically short hood compared to production ‘Vettes and cutting-edge technologies including four-wheel steering, traction control and active suspension, the Indy — so named because it used a 2.65L V8 Chevy developed for Indy Car racing — kept dreams of the midengine ‘Vette alive
The 1990 CERV III — this time the C stood for “Corporate,” not Chevrolet Engineering Research Vehicle — was the next step. Datini’s research convinced him it was an attempt at a production version of the Indy.
CERV III had scissors doors and was built of Kevlar, carbon fiber and aluminum. With a 650-hp twin-turbo 5.7L V8, GM predicted a top speed of 225 mph. It debuted at the 1990 North American International Auto Show in Detroit.
After that, work on the midengine Corvette went undercover for two decades. Photos of disguised prototypes at test tracks surfaced from time to time, but the car seemed to be as much myth as metal. There are whispers the Great Recession halted work on one, setting development back years.
A display of Zora Arkus-Duntov known as “The Godfather of the Corvette” at the General Motors Warren Technical Center in Warren, Michigan on Friday, January, 31, 2020. (Photo: Eric Seals, Detroit Free Press)
Development of the 2020 Corvette Stingray began around eight years ago, a long time for most projects, but the blink of an eye when it’s the last chapter of a 60-year story.
Mark Phelan for Detroit Free Press
Revolution, as the documentary is titled, will air in two parts and goes deep behind the scenes of the biggest ever change to the Corvette.
If there’s one word that describes the 2020 Chevrolet Corvette Stingray pretty darn well, it’s probably “Revolutionary.” It’s the first time in the nameplate’s history that the engine resides behind the driver, as Chevy elevates its long-running sports car to battle the world’s best.
Naturally, curious minds have to wonder what went on behind the scenes to make this car come together. Chevy has good news for you. Revolution, a two-part documentary detailing the C8-generation Corvette’s development, is set to air in the coming months, the brand said Monday.
Chevy told Roadshow the documentary will air on the Corvette’s homepage here, but for now, the quick trailer embedded above will give fans a taste of what the upcoming feature holds. There’s plenty of first-hand knowledge on display — the team that put the latest car together gets plenty of camera time. Numerous people in the mid-engine Corvette program spill how it felt to take an icon and reinvent it.
The documentary announcement comes just after Chevy announced that the production of the 2020 Corvette Stingray kicked off on Monday. With the C7-generation car in the rearview mirror, and all necessary retooling done for the mid-engine car, the workforce in Bowling Green, Kentucky is solely focused on the new Corvette.
Chevy didn’t have an exact timeline for when the first part of the documentary will air, but it should give fans eagerly awaiting their cars something to pass the time as deliveries begin in early March at the latest. Hopefully by this summer, we’ll see plenty of 2020 Corvettes on the road as the plant ships them out to their new homes.
When you’re Chevrolet and you have access to five-time Le Mans winner Oliver Gavin, it’s a smart idea to shove him behind the wheel of a new C8 Corvette with the Z51 performance package and point him out for a flying lap of the Nordschleife. These lap times are largely irrelevant as they absolutely do not correlate to driving enjoyment or real-world usable performance, but it’s a slightly abstract way to compare the relative abilities of sports cars.
With ideal conditions and an incredibly capable driver, Chevrolet managed a lap time of 7 minutes and 29.9 seconds. That’s quicker than a recent independent test Porsche 992 time, and Chevrolet’s own high-powered Camaro ZL1. That said, it’s 16 seconds off the pace of the C7-generation Corvette Z06. Interesting? Maybe.
Chevrolet confirmed to RoadShow that this was the lap time, as hidden (below) in a teaser video for its upcoming documentary on the development of the C8.
Are you and I capable of this lap time? Hell no. But the car is capable of it in the right hands, and I guess that has bragging rights of some kind.
Obviously this is still just the base model Corvette with its 495 horsepower V8 mounted in the middle. The Z51 pack adds aero bits, better tires, better suspension, and better cooling for the entire car. There will be more powerful, better, and faster Corvettes coming, but for now you can rest assured knowing a C8 Corvette is slightly faster around the ‘ring than the big bad supercharged Camaro. That is, unless the ZL1 was of the 1LE variety (which ran a 7:16.04).
Bradley Brownell for Jalopnik
Zora’s dream of bringing a mid-engine Corvette to market has finally been fulfilled!
Chevrolet is celebrating the Start of Regular Production (SORP) of the 2020 Corvette Stingray today and they shared this photo of a Black mid-engine Coupe on the Corvette assembly line in Bowling Green, KY.
The car is the VIN 001 Corvette that was purchased by Rick Hendrick for $3 million last month at Barrett-Jackson. Chevrolet told us previously that the first mid-engine Corvette produced for customers would be a Black Coupe with the Z51 package.
Here is Chevrolet’s tweet celebrating the start of C8 production from this afternoon:
Chevrolet is saying that initial vehicle shipments to dealers are expected to begin in late February or early March.
Congratulations to all those who worked on the new Corvette to get it to this point and we are excited for all of our friends that have a new C8 Corvette on order. The new Corvette Stingray is a grand slam home run for Chevy and from it, we will see a paradigm shift in how people will view mid-engine sports cars in the future.
And with VIN 001 coming of the Corvette assembly line today, that future is now!
Chevrolet also offered up this trailer for a documentary of the C8 Corvette’s development called Revolution:
Having just captured the North American Car of the Year gong, the revolutionary all-new Chevrolet Corvette Stingray (C8), the first-ever Vette to get a mid-engined layout and right-hand drive, has just been unveiled in Japan for the first time. Given the fact that this reveal at the Tokyo Auto Salon was the first time that this radical new Vette has been shown anywhere in Asia, the reception was nothing short of rapturous.
At the world’s third largest customizing show, after SEMA and Germany’s Essen Motor Show, the Tokyo Auto Salon, staged inside the massive Makuhari Messe site became the location for GM Japan to unveil their biggest, most high profile launch in a decade.
Sitting on the stand in Zeus Bronze Metallic with a light tan-colored leather interior, GM Japan’s president Tadashi Wakamatsu explained to the thousands of gathered press and onlookers that the Japanese market would get a US-spec “2LT” and the high performance “3LT” and that deliveries would start in early 2021.Today In: Lifestyle
Asking several of the assembled media and Vette fans in the audience about their interest in the new coupe, this writer was not surprised to learn that all interviewees found the revolutionary new mid-engined layout, in comparison to the outgoing front-engined setup employed through seven generations of Corvette since the first 1953 model, especially appealing.
All pundits also agreed that the recently launched and highly rated movie “Ford v Ferrari” had heightened their desire to see the all-new Vette.
“Sure the Vette is not a Ford, but its a reasonably-priced mid-engined American muscle car and that is more than worthy of attention,” said one Vette fan. In a country where American cars account for less than 2 percent of the market, it is rare to hear car buyers speaking in such glowing terms of American cars.
Several other audience members said that they found the all-new mid-engined layout and right-hand-drive feature “extremely appealing.” Even though the starting price in Japan will hover around $100,000, in contrast to the surprisingly low $60,000 entry level sticker price in the U.S., dozens of Japanese onlookers expressed great interest in an American-made supercar that undercuts many of its European rivals like Lamborghini, McLaren and many Ferraris by less than half.
Even at that $100,000 entry level price in Japan, one sports car fan said, “I think Chevrolet have pretty much pulled a rabbit out of a hat here. Apart from the near 500 hp V8, which has switched from front-engined to mid-engined, it gets lightweight hi-tech aluminum construction, its composite and it has carbon fiber in it. And I love that sleek supercar silhouette.”
That is all true. But one of the main ways that parent company GM was able to keep the new Corvette’s starting price under $60,000 back home is to leverage the company’s economies of scale, with specific reference to the brand’s new Global B electrical platform. At last November’s L.A. Auto Show, I listened as Corvette chief engineer Tange Juechter explained how this new platform would provide the wiring, computers and structure for active safety systems, infotainment systems and even the groundwork for future electric cars.
GM Japan’s Wakamatsu couldn’t hide his joy as he unveiled the new Vette by saying, “We have a car here that gets inspiration from both an F35 jet fighter and and F1 race car. That great design, the all-new mid-engined V8 power, 0-60mph in 3 seconds and an appealing price tag is generating tremendous buzz in Japan.” And that will no doubt lead to unprecedented Vette sales in Japan. Time will tell.
Source: Peter Lyon for Forbes
There’s A New Engine In The C8.R Corvette, And It Sounds Nothing Like Its Predecessor.
They say beauty is in the eye of the beholder, and although that’s true, it can also be in the ear of the listener.
Since the Corvette first hit the streets back in the 1950s, it was imbued with the beautiful and nearly magical sound of V-8 performance. It was a deep, bass-filled rumble that just oozed a feeling of power. Over the years, the sound emanating from Corvettes, both on the street and at the track, had a distinctive note that became synonymous with the car. When the Corvette moved to the LS1 in 1997, the firing order was tweaked a bit, and although the sound did change, it still had that deep rumble that we all love.
But the only thing constant in the world is change. For the C8.R, Chevrolet Racing really changed things up with its new mid-engine marvel, but it wasn’t the engine placement that ended the car’s iconic sound signature. It was the engine itself. Gone is the deep baritone exhaust note, replaced instead with a high-pitched Ferrari-like sound. Think puberty in reverse. And although we love the sound of a wound-out Ferrari or other Italian supercars, having that pitch emanate from the back of a Corvette is something that will be hard to get used to. We’re not saying the sound is bad—it’s actually pretty badass—but it’s not even close to the sound signature we’ve come to associate with Corvettes.
The real culprit here isn’t the new 5.5L DOHC V-8 that Chevrolet moved to. Instead, it was the choice to go with a high-revving flat-plane crank. This drastically changed the firing order of the engine and eliminated the classic American V-8 sound that’s typical with the firing sequence of a traditional cross-plane crank. But we know what you’re thinking: “Well, this is just the race car, so I’m going to be able to get my V-8 rumble fix from the production car!” Well, yeah, for now. You see, for Chevrolet Racing to run this new DOHC flat-plane crank mill in the C8.R, it has to, according to the rules, run a similar engine in at least 300 production cars. So does this mean that an eventual C8 Z06 variant will lose its iconic exhaust note?
52 PHOTOS2:11 p.m. EST Jan. 26, 2020This 1953 Corvette will be given away as one of the “Lost Corvettes” in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.CORVETTE HEROESThis 1953 Corvette will be given away as one of the “Lost Corvettes” in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.CORVETTE HEROES
This 1954 Corvette will be given away as one of the “Lost Corvettes” in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.CORVETTE HEROESThis 1954 Corvette will be given away as one of the “Lost Corvettes” in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.CORVETTE HEROESThese 1954 (left) and 1955 Corvettes will be given away as one of the “Lost Corvettes” in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.CORVETTE HEROESThis 1954 Corvette will be given away as one of the “Lost Corvettes” in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.CORVETTE HEROES
This 1955 Corvette will be given away as one of the “Lost Corvettes” in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.CORVETTE HEROESThis 1955 Corvette will be given away as one of the “Lost Corvettes” in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.CORVETTE HEROESThis 1956 Corvette will be given away as one of the “Lost Corvettes” in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.CORVETTE HEROESThis 1956 Corvette will be given away as one of the “Lost Corvettes” in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.CORVETTE HEROES
This 1957 Corvette will be given away as one of the “Lost Corvettes” in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.CORVETTE HEROESThis 1958 Corvette will be given away as one of the “Lost Corvettes” in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.CORVETTE HEROESThis 1959 Corvette will be given away as one of the “Lost Corvettes” in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.CORVETTE HEROESThis 1960 Corvette will be given away as one of the “Lost Corvettes” in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.CORVETTE HEROES
This 1960 Corvette will be given away as one of the “Lost Corvettes” in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.CORVETTE HEROESThis 1961 Corvette will be given away as one of the “Lost Corvettes” in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.CORVETTE HEROESThis 1962 Corvette will be given away as one of the “Lost Corvettes” in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.CORVETTE HEROESThis 1963 Corvette will be given away as one of the “Lost Corvettes” in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.CORVETTE HEROES
This 1964 Corvette will be given away as one of the “Lost Corvettes” in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.CORVETTE HEROESThis 1965 Corvette will be given away as one of the “Lost Corvettes” in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.CORVETTE HEROESThis 1965 Corvette will be given away as one of the “Lost Corvettes” in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.CORVETTE HEROESThis 1966 Corvette will be given away as one of the “Lost Corvettes” in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.CORVETTE HEROES
This 1967 Corvette will be given away as one of the “Lost Corvettes” in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.CORVETTE HEROESThis 1968 Corvette will be given away as one of the “Lost Corvettes” in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.CORVETTE HEROESThis 1968 Corvette will be given away as one of the “Lost Corvettes” in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.CORVETTE HEROESThis 1969 Corvette will be given away as one of the “Lost Corvettes” in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.CORVETTE HEROES
This 1970 Corvette will be given away as one of the “Lost Corvettes” in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.CORVETTEThis 1970 Corvette will be given away as one of the “Lost Corvettes” in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.CORVETTEThis 1971 Corvette will be given away as one of the “Lost Corvettes” in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.CORVETTEThis 1972 Corvette will be given away as one of the “Lost Corvettes” in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.CORVETTE
This 1973 Corvette will be given away as one of the “Lost Corvettes” in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.CORVETTEThis 1973 Corvette will be given away as one of the “Lost Corvettes” in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.CORVETTEThis 1974 Corvette will be given away as one of the “Lost Corvettes” in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.CORVETTEThis 1975 Corvette will be given away as one of the “Lost Corvettes” in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.CORVETTE
This 1975 Corvette will be given away as one of the “Lost Corvettes” in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.CORVETTEThis 1976 Corvette will be given away as one of the “Lost Corvettes” in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.CORVETTEThis 1976 Corvette will be given away as one of the “Lost Corvettes” in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.CORVETTEThis 1977 Corvette will be given away as one of the “Lost Corvettes” in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.CORVETTE
This 1978 Corvette will be given away as one of the “Lost Corvettes” in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.CORVETTE 1979 Corvette will be given away as one of the “Lost Corvettes” in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.CORVETTEThis 1980 Corvette will be given away as one of the “Lost Corvettes” in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.CORVETTEThis 1981 Corvette will be given away as one of the “Lost Corvettes” in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.CORVETTE
This 1982 Corvette will be given away as one of the “Lost Corvettes” in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.CORVETTEThis 1984 Corvette will be given away as one of the “Lost Corvettes” in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.CORVETTEThis 1985 Corvette will be given away as one of the “Lost Corvettes” in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.CORVETTEThis 1985 Corvette will be given away as one of the “Lost Corvettes” in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.CORVETTE
This 1985 Corvette will be given away as one of the “Lost Corvettes” in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.CORVETTEThis 1986 Corvette will be given away as one of the “Lost Corvettes” in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.CORVETTEThis 1987 Corvette will be given away as one of the “Lost Corvettes” in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.CORVETTEThis 1988 Corvette will be given away as one of the “Lost Corvettes” in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.CORVETTE
This 1989 Corvette will be given away as one of the “Lost Corvettes” in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.CORVETTEThese Corvettes, known as the “Lost Corvettes,” will be given away in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.
Corvette “had reason” to take its No. 4 car back out on track after lengthy repair…
The “tough lessons” of the No. 4 Chevrolet Corvette C8.R’s tumultuous Rolex 24 at Daytona debut gave Corvette Racing confidence going forward with its new car, according to team manager Ben Johnson.
The silver No. 4 Corvette spent eight hours in its garage during the IMSA WeatherTech SportsCar Championship season-opener after a cracked bell housing resulted in an oil leak.
Having pitted at around 11 p.m. the car eventually returned to the track close to 8 a.m. but it still managed to be classified as a finisher, albeit 327 laps behind the GTLM class winner.
While not divulging the extent of the oil leak and associated damage, Johnson explained why the team kept its car in the garage for so long.
“To fix the problem we had to move the engine back,” he told Sportscar365.
“We tried to do it with the engine installed to expedite it but then we realized that if we wanted to get it back on track, we had to take time to take the engine out and put it back in.
“We just took our time to make sure that there was nothing else. At that point, we were no longer in contention, but we had reason to go out and just understand where else the car may have issues.
“It was just kind of a test session after that.
“I think we will go back and disassemble the whole car. We have some issues to address with the oil leak.”
Oliver Gavin, who shared driving duties in the No. 4 with Tommy Milner and Marcel Fassler, said the Corvette crew “wanted to be methodical” about its repairs which added to the length of time it spent in the garage.
The Englishman suggested that the car was starting to show signs of promising pace that it could have taken through the night had the leak not occurred.
“It was really tough on the guys, eight hours of working from midnight until eight in the morning, it was crazy,” Gavin told Sportscar365.
“As soon as that happened, we knew that our day was done and that we wouldn’t be challenging. It was a shame because up to that point, our car had just started to come along.
“It wasn’t super strong right at the start, but we were gaining on it as we went through the race. Could we have been in the mix at the end? Who knows. But there was a lot that we’ve learned from this.
“As a team, we figured a lot of stuff out today. Testing is great but you really see exactly where you are when you come to a race and see where your competition is.
“We’ll take that away and process the data to see how we can make ourselves and the car better for Sebring.”
The No. 3 Corvette fared better than its sister car with Antonio Garcia, Jordan Taylor and Nicky Catsburg bringing home a fourth-place class finish on the lead lap.
Johnson said that this car’s run wasn’t entirely straightforward, but it held up well enough to remain in contention for a podium heading into the final two hours.
“We had a slight clutch issue at one point, but we had fixed it after the first stop that we witnessed it, so it wasn’t a time loss,” he explained.
“But nothing held up that car specifically again. We were really happy that all the execution, pit stops, driver changes… all things that you don’t get to test in anger until you reach the race, all went super well.”
Johnson added that the Rolex 24 has given the Corvette team confidence ahead of its next race outing at the ‘Super Sebring’ endurance racing double-header weekend in March.
“Coming away from our first race with one car on the lead lap… the issue with the oil leak is obviously very apparent, but when we looked at it we realized it’s a pretty simple fix,” he said.
“I think it raises everyone’s confidence that we can get through some of these early tough lessons and move on to Sebring in a much better spot.”
Source: Daniel Llyod for Sportscar365