When Corvettes are shipped to a Chevrolet dealership, they have to go through a pre-delivery inspection known as PDI. Service technicians take the cars fresh off the truck into the service bays where they run through a checklist of things to do that include installing any parts and accessories as well as checking and topping off the fluids.
We’ve talked about the PDI process previously, and have even shared some of the processes like the installation of a High Wing. Now here’s a chance to watch a 2020 Corvette going through PDI with a time-lapse video that condenses the hour-and-a-half process into just under 5 minutes. While we don’t really learn anything new from the video, we are treated to a scene that most of us will never see.
The video was posted to YouTube by a user named “I Sell Corvettes“:
The long version time-lapse of the C8 pre-delivery inspection. This C8 is a fairly basic, non-Z51 so the PDI is pretty quick and easy, less than an hour and a half.
Fifth win for GTLM leaders, sixth for first-year Chevrolet Corvette C8.R
CHARLOTTE, N.C. (Oct. 11, 2020) – Antonio Garcia and Jordan Taylor’s charmed season continued Saturday as they claimed another victory in the IMSA WeatherTech SportsCar Championship with a victory in their No. 3 Mobil 1/SiriusXM Chevrolet Corvette C8.R at Charlotte Motor Speedway Roval.
Garcia passed John Edwards for the lead with 21 minutes left and held on despite a late-race caution on a tricky and treacherous night at the Roval – the first time for Corvette Racing at the venue. The duo extended their GTLM Drivers’ Championship lead to 24 points over their Corvette Racing teammates Tommy Milner and Oliver Gavin, who finished fourth in the No. 4 Corvette C8.R.
Chevrolet also saw its lead grow in the Manufacturers standings to 14 points.
Garcia and Taylor have now won five of eight races this year and four of the last five in the first year of the mid-engine Corvette C8.R. Taylor began on pole position Saturday for the second consecutive race, but conditions were much different at the green flag with a steady rain having pelted the track since mid-afternoon. The first 16 minutes featured two full-course cautions, and both Corvettes came in at 20 minutes running for fuel, tires and driver changes – Taylor to Garcia and Gavin to Milner.
On the restart, Garcia in the No. 3 Corvette ran second while Milner made a big move on the inside of the first corner to move from fourth to third. He fell back a few laps later before the track began to dry somewhat, and the Corvettes grew stronger during a long-green flag run. It culminated with Garcia moving in front with a move on Edwards to the inside of Turn 8 just before the infield section rejoined the banked oval part of the track.
Garcia pulled away quickly and led by as much as five seconds a handful of laps later. Milner, too, was making a charge back to podium position before part of the No. 4 Corvette’s right-rear suspension broke with 11 minutes remaining. Milner went hard into the outside wall but got out of the car under his own power and later was evaluated and released from the infield care center.
The race began again with five minutes to go, and Garcia pulled out to a one-second lead with a lap to go and rain falling again. He crossed the finish line with a 1.474-second margin of victory.
Corvette Racing heads back to Michelin Raceway Road Atlanta for next week’s 10-hour Petit Le Mans on Oct. 15-17.
ANTONIO GARCIA, NO. 3 MOBIL 1/SiriusXM CHEVROLET CORVETTE C8.R – RACE WINNER:
“It was super, super stressful. Even if it felt like I was just following the 24, I was really hanging on. I probably crashed four or five times, just like everyone else. Jordan gave me some very good indications before he jumped out and before we went green to give me confidence in following the BMW. They were really strong right away, but I didn’t really give up. As soon as I felt like we stabilized on lap times, I kept pressuring him and using traffic to close up. They were very strong as you saw with their sister car. As soon as I saw they were struggling a little bit with tires – especially the 24 – I stayed patient even when the 25 was coming. I saw my opportunity and went for it. I don’t know if it was risky move or not, but at that point I didn’t think about the championship. I wanted to win the race. As soon as I got past, I put my head down, tried to open a gap and it worked. I’m very happy for Corvette Racing and Team Chevy. I’m glad Tommy is OK. We have a very fast car but also a very safe car. That’s a magnificent combination of car here. It’s great to be driving for the best team out there and keep winning races. We need to keep this mentality and go all the way to the end.”
DID THE TRACK IMPROVE FROM THE START? “The first two laps was close to how we finish. It was very difficult at the beginning. There was a massive river going across at Turn Three, and I almost lost it two or three times there. The conditions definitely improved, but lap by lap you know where to place your car, and following someone opens the water a little bit for you. Once we got into a rhythm, the track improved for sure but it started to rain at the end. Being in the wet in the dark also makes it difficult to spot standing water.”
JORDAN TAYLOR, NO. 3 MOBIL 1/SiriusXM CHEVROLET CORVETTE C8.R – RACE WINNER:
“At the beginning of the race, there obviously was a lot of water on the track, and with the lighting it was hard to see where the standing water was. Considering our championship position, it was kind of damage control for me, trying to stay on the track and handing off the car in one piece. It was easy to get caught up in battling with people at that point of the race, but there was really no point. You weren’t going to win the race in the first 20 or 30 minutes. I was glad to get through that phase and hand over the car to Antonio and let him go for it. He did a great job of keeping the car out of the wall for those first few laps and putting the pressure on the BMW. We would have been happy leaving here with a podium given the championship position with three races to go. But he kept the pressure on, never put a wheel wrong and was able to get by. It’s really awesome to maximize the points when we didn’t expect it. We can go into the last three races and race for the win, as well. It’s another great day for Corvette Racing. It’s good to see that Tommy walked away from that big hit at the end. It says a lot about Chevrolet and Corvette Racing and how safe they build the race cars and how strong they are. It give us a lot of confidence when we strap in that we’re going to be safe.”
ROLE OF THE CHEVROLET SIMULATOR IN RACE PREP: “If it wasn’t for the simulator, we probably wouldn’t have been able to put it on the pole and been able to stay out of trouble like that. So the simulator was a big tool for us. I’m glad this all worked out.”
LOOKING TO PETIT LE MANS: “We’re already thinking about it. It’s at the top of Antonio’s list of races to win. The focus has already shifted. The guys are driving to Atlanta tomorrow to prep the cars, but unfortunately they’ll have a lot to prep on the 4 car. We did a test day there last week where Nicky (Catsburg) and Marcel (Fassler) were able to get some laps. At the Six-Hour, we struggled with a few things and I think we found a few things at the test for some long runs and working on the different compounds of tires. This weekend was good to get in some mixed conditions. We haven’t had a lot of rain and mixed conditions in a race setting other than Road America. It was good to get a bit of everything. Now no matter what we see at Petit Le Mans, we feel pretty well prepared.”
DID THE ADDITIONAL INFIELD LIGHTING HELP? “Yes, we tested here about a month ago and the lighting was pretty difficult to see where you were going. They’ve definitely made some nice improvements. If it had been a dry race, the visibility would have been great. When you add in the water with the type of surface they have here, it’s very reflective when there’s a lot of water on it. It’s hard to distinguish what’s a damp section and what’s a deep section. It’s hard to pick out what’s what at night. It took some getting used to, but it probably made a good show on TV. It looked pretty spectacular when I got out and watched all the headlights reflecting off everything. This was definitely a cool event, and I’m glad we were able to win the first one back here.”
OLIVER GAVIN, NO. 4 MOBIL 1/SiriusXM CHEVROLET CORVETTE C8.R – FINISHED FOURTH:
“This whole weekend has been a massive challenge. The format of this race and the way it has happened made for some quite difficult sessions. Then you add in the extra element of the weather conditions, it just seemed like it was culminating in somewhat of a bit of a perfect storm for us. The start of the race for me was crazy. There were massive amounts of standing weather everywhere. I was just hanging on, just driving the car around and trying not to crash. I had multiple moments every single lap thinking well I could finish the race by doing something daft, so I just got myself into a position where I could sort of survive. Others were spinning off and crashing, and we ended up in third when we came in for the pit stop and hand it over for Tommy to drive. It was looking okay for a while and Tommy had pretty good pace. Then we had the issue at the right-rear. We still are trying to figure out what exactly happened. It just seems if something can go wrong, it will go wrong for us unfortunately. But I am very happy Tommy was able to walk away. It was a pretty high-speed accident so that’s a great testament to the guys at Chevrolet and Corvette for how well they’ve engineering the road car and the race car. That was a really big hit and Tommy was able to walk away on his own. And of course, I’m happy for Jordan and Antonio in picking up another win. It’s another positive outcome for the team.”
TOMMY MILNER, NO. 4 MOBIL 1/SiriusXM CHEVROLET CORVETTE C8.R – FINISHED FOURTH:
“I didn’t have any indication at any point that there was something going wrong. Everything felt totally normal up until it wasn’t. I had almost finished on the banking, which is more G-loading than Daytona. It doesn’t really explain the problem, it seems like. At first I thought I lost a tire, like it just overheated or something like that for how quickly it went around. The first indications were that wasn’t the case. The track had some pretty gnarly weeps in the seams of the race track that would get you a little bit loose sometimes, but it was never really a huge deal. Upon further inspection, it looks like once the car got back to the trucks, we did have something at the right-rear and the wheel came off. Fortunately, this is a really strong and safe Corvette that we have and it held up really well. Selfishly I’m glad it is nothing I did wrong, but that doesn’t change the outcome. There is still a lot of work for the guys to get the car fixed and get ready to go to Petit Le Mans in less than a week. I feel bad for the guys for the amount of work they have to do. Obviously, the first thing we do as a team is to figure out what the failure is, how it happened and make the necessary changes to prevent that from happening again. The guys will go through that in the next couple of days and come up with a good plan.
“In the last part there, I don’t know if it was the BMW kind of fading or us getting better. I got a little bit unlucky at the start of my stint with traffic. I got balked pretty bad there going into Turn One and had a little moment and the No. 25 got around me. We knew that was going to be a big deal here. It seemed like the car was getting better toward the end. Once Antonio got around the No. 24, he was able to pull away with a little bit of a gap. I was just trying to put a little pressure on the two cars in front of me and see if we could make them make a mistake again to get around. Passing is very difficult here, but it never quite got to that point unfortunately for us. It just wasn’t our day today. I felt like we had a pretty good car. We were fast in practice and it looked like we were making decent progress at the end, but we never got there.”
We’ve been expecting to hear this news and finally today it has been confirmed by Chevrolet that the new 2020 Corvette Stingray will be the official Pace Car of the 104th Indianapolis 500. This marks the 17th race that Corvette has served as the official Pace Car, and the 31st Chevrolet to lead the field.
This year’s running of the Indy 500 will take place on Sunday, August 23 with the race being shown live on NBC.
With no fans allowed in attendance this year due to the COVID-19 pandemic, the official pace car driver will be GM President Mark Reuss.
“It’s truly an honor to have the opportunity to be behind the wheel of the mid-engine Corvette Pace Car at such a historic race as the Indy 500,” said GM President Mark Reuss. “The 2020 Corvette Stingray is the result of a close collaboration between the Corvette Racing and production engineering teams, setting a new benchmark for supercars around the world.”
The 2020 Corvette Stingray Pace Car is Torch Red and features the high Wing Spoiler and ground effects package. The Z51 Coupe will also wear the 104th Indy 500 livery on the doors. The new 2020 Stingray is capable of accelerating from 0-60 in 2.9 seconds and has a top speed of 194 mph, so it should have no trouble in setting the pace for the IndyCar racers.
“This is a continuation of our outstanding partnership with Chevrolet,” Indianapolis Motor Speedway President J. Douglas Boles said. “We’re so grateful for all that Chevrolet has contributed to the success of our events. The Torch Red 2020 Corvette Stingray is a world-class machine rich with speed, performance and excitement, perfectly suited to pace the ‘500′ field.”
Chevrolet has been linked to the Indianapolis Motor Speedway with both entities founded in 1911. Company founder and namesake Louis Chevrolet and his brothers Arthur and Gaston raced in the early 500-mile races with Gaston winning the race in 1920. Today, Louis Chevrolet rests in peace in a local Indianapolis cemetery just 15 minutes away from the track.
This afternoon we came across this Facebook post from Corvette Exterior Design Manager Kirk Bennion sharing these words from fellow GM designer Adam Barry who led the project. The 2020 Corvette Pace Car features a number of items from Genuine Corvette Accessories as discussed:
Indianapolis Motor Speedway
With the latest news from the UAW and the State of Kentucky regarding the coronavirus shutdown, it looks like we are beginning to see the light at the end of the tunnel. And for Corvette fans, that means the resumption of the 2020 Corvette production could be here as early as May 18th.
The Big 3 domestic automakers have been negotiating with the United Auto Workers on when manufacturing can restart at the various facilities across North America. There’s a lot of moving parts to get manufacturing up and running as it’s not just the factory that needs to restart, but all the vendors and suppliers also need to be back to work as well. With the states having their own individual shelter in place orders, that could be dicey for the next month or so.
Michigan’s stay at home order for non-essential workers was extended through May 15th. Yesterday, Kentucky’s Governor Beshear issued guidance for when various businesses could reopen and set May 11th as the date for when manufacturing and automotive dealerships can resume operations. Reopening plans for the state of New York where the C8 Corvette’s LT2 V8 engines are assembled at the Tonawanda Powertrain facility are also still in the works. The good news there is that upstate New York wasn’t as hard hit as New York City and indications are that New York’s reopening plan could be rolled out regionally with manufacturing slated as one of the first sectors to be reopened.
A recent memo from GM to workers indicated that restarting the plants would take some time and that a team of salaried workers and managers would come in early as paid volunteers to prepare operations before the restart occurs. There may also be some discussions about plant workers going through retraining exercises to get back up to speed as the plant has been closed for over a month.
When workers return to manufacturing at the Corvette Assembly Plant, there will be new protocols set up to keep everyone as safe as possible. GM has said that the safety protocols for workers will include:
- Health and temperature screening
- Heavy workplace cleaning
- Social distancing strategies
- Following top medical and scientific data including guidance from the CDC
When it comes to recalling workers, UAW spokesman Brian Rothenberg said, “UAW President Rory Gamble has said the single focus should be on the health and safety of members and the litmus test should be whether your own family member would be safe going into that plant.”
The Corvette Assembly Plant shut down at the end of March 20th with approximately 2700 new Corvettes assembled to date. The production of the 2020 model year is expected to run through the end of August.
Many gearheads have a strange affinity to Hot Wheels. Here is everything you’ve ever wanted to know about the company, but never asked.
Toy cars can be divided into two categories: Hot Wheels and everybody else. For over 50 years, Mattel has dominated with what is now recognized as the best-selling toy in the world. It’s impossible to count how many car buffs, from mechanics to real race stars to TV personalities, grew up playing with these cars. Whether it was just a few models or massive collections, Hot Wheels has been part of car culture for decades and is never going to stop. Whether it’s a simple model or some fancy licensed vehicle, Hot Wheels simply enthralls.
Yet it’s incredible how some people are unaware of the facts of the company and its history. From its unique origins to how these cars are put together, the story behind Hot Wheels is fascinating. There are also touches from how some of these cars are more expensive than real ones to some unique touches on the culture. Here are 20 amazing facts about Hot Wheels to prove they’re more than just “kids toys.”‘
20/20 Real-Life Hot Wheels Jump Was A World Record
Growing up a massive Hot Wheels fan, racer Tanner Foust decided to honor them in a fun way. At the 2011 Indy 500, Foust talked the management into seeing up a massive orange ramp and raced down it in a rally car.
After 90 feet of track, Foust sailed 332 feet, the longest record for such a move. He topped it by driving through a 66-foot loop in 2012 to live out the dreams of every kid.
19 Technology In Car Building Is Amazing…
Making toys has become a very high-tech business today. Just like real car companies, Hot Wheels has adapted to the 21st century nicely. Computers and 3-D technology are utilized to make sure the designs are perfected before the building begins.
It also helps them keep on top of the latest car trends to ensure that today’s Hot Wheels are sleeker and more natural than the ones of the past.
18 But They’re Still Diecast
There are many toy car lines out there, but Hot Wheels is still the king of the bunch. The key reason is that, for all the advances in technology, every car is still diecast and built mostly by hand.
Even when cheaper materials are available, Mattel knows the diecast is what the fans want. It’s also helped in making customized cars at home for popular models. After 50 years, Mattel doesn’t want to mess with success and do away with diecast.
17 They’ve Worked With NASA
Hot Wheels have done a few astronaut-themed toys over the years. But that’s not the only connection they have with NASA. In 1998, they were able to work with the agency to create an exact replica of the Mars Rover, which landed on the Red Planet that very year.
They also worked with them in 2012 for scale models of the Curiosity rover. It’s amazing how the company got access to top-secret plans to make these toys.
16 Collectors Take It Seriously
Some may dismiss Hot Wheels as “just for kids.” But collectors take it more seriously than real automobiles. The 1969 Volkswagen Beach Bomb (only 16 prototypes were made) is known to go for at least $15,000.
Some rare models can go for a hundred grand, and collectors are always on the lookout for unique mint models. Entire museums are devoted to various cars as some Hot Wheels collections put legit car collectors to shame.
15 Scaling Down The Cars Was Tricky
A key to the company’s success is that they work with scores of real car companies to get looks at plans for their toy models. Yet it’s not so simple as just “make a smaller version.” The biggest challenge is to achieve the proper scale for the toys in a diecast model yet retain the details of the actual car.
That can be complex with some fancy vehicles. That every model has to be sized to fit the same tracks just adds to why it takes as long developing a toy car as a real one.
14 NASCAR Star Has The Record For The Longest Track
Ever since the Hot Wheels tracks were created, fans have been trying to top themselves making the most extended and most complex. A few have achieved great ones, but it’s fitting a NASCAR star holds the record for the longest.
In 2019, Joey Logano unveiled a 1,941-foot long track stretched across his garage. It weaves through his car collection with 1222 boosters before ending in Logano’s own 2018 HW Ford Mustang. Add yet another title to Logano’s list of accolades.
13 They Made A Car Coated In Diamonds
In 2008, Mattel made a big deal of celebrating the 40th anniversary of the Hot Wheels line. As a special reward, Mattel had Jasons of Beverly Hills craft the most expensive Hot Wheels car on the planet.
Cast in 18-karat gold, it’s covered with 2700 diamonds and gems totaling nearly $150,000 today. It’s become a rotating exhibit at toy museums for the glitziest Hot Wheels you could see.
12 The Darth Car Is A Speed Machine
While they do stick to toys, the company has been busy creating some real-sized cars for collectors. One of the most notable is based on Darth Vader, with the hood looking like his fearsome helmet and in jet black.
This isn’t just for show as it’s based on a C5 Corvette with a GM LS3 V-8 engine capable of 526 hp and 150 mph. The Dark Lord of the Sith would be proud of this powerful craft.
11 Every Car Is Tested To Make Sure It Can Run A Track
Almost from the beginning, Hot Wheels car fans had to have a track with the cars. They’ve gone from straight lines to elaborate roller-coaster-like loop systems to leave kids entertained for hours.
What few realize is that the track determines if a car makes it as Mattel prides itself on “every car can fit every track.” More than once, a prototype has to be altered when it won’t fit as the track decides a car’s final form.
10 There Are More Hot Wheels Cars Than Real Cars
While it’s tricky to figure out for sure, most sources agree there are at least one billion cars on the planet (give or take a few hundred thousand in auto graveyards). In contrast, since 1968, six billion Hot Wheels cars have been created.
True, many have been trashed and/or recycled, and it’s impossible to count how many have been lost in backyards. But given how 16 cars are produced every second, it’s no shock the toys outnumber the real deals.
9 Several Creators Are Legit Car Designers
The one constant of Hot Wheels is that the cars look just as good as the real deal. There’s an excellent reason for that as scores of the manufacturers are legitimate car designers. Larry Wood was a veteran of Ford before becoming one of the first Hot Wheels designers.
He’s not alone as Jack Ryan was a rocket designer who crafted the bearings that made the cars so great. Scores of the car designers were in real automobiles first, so it’s no wonder the vehicles look so good.
8 The Original Camaro Is Worth A Fortune
Mint conditions of the Original 16 Hot Wheels releases are all pretty collectible items. But one dominates from the pack. While versions of a Camaro were produced, a few had white enamel paint.
They had been meant to discover flaws in a prototype but accidentally released. A mint version of one went for a hundred thousand dollars and made this one of the most expensive toys on the planet
7 They Released A Custom Corvette Before GM Did
An early standout for the company at a custom Corvette in 1968. What made it notable was that the toy was released before GM had their actual Corvette in car dealerships.
The fact designer Harry Bradley had worked at GM indicates he may have “borrowed” the designs before he left to allow Mattel to beat GM to releasing a Corvette to the masses.
6 The Red Stripes Are Expensive
If you find what looks like an old Hot Wheels car, take a good look at the wheels. If they have red stripes, then you’ve just found a fantastic collector’s item. From 1968 to 1977, designers hand-painted red lines onto the wheels to make the cars look distinctive.
As a cost-cutting measure, they switched to all-black wheels in 1978. Some mint condition red-striped vehicles have been known to go for thousands online.
5 One Of The Original Cars Was Based On A Car With No Doors
The first wave of Hot Wheels was just 16 cars, and any of them can be valuable today. One is notable, the 1965 Dodge Deora. This car boasted no doors but rather a hatch for folks to crawl into.
It was based on a fun design used by Mike and Larry Alexander but in an irony, no real Dodge Deoras were built, to make this a truly unique model
4 A Tie-In Cartoon Got Pulled By The FCC
Today, cartoons based on toy lines are commonplace. But in 1969, Hot Wheels got in trouble when they put out a cartoon series about some teenage car drivers. Despite good messages, the show was hit by complaints about being a “half-hour commercial.”
The FCC agreed, and it was yanked off the air. The company was just ahead of their time with a cartoon tie-in for a hit toy line.
3 There’s A Fight On Where The Name Came From
Much of Hot Wheels is shrouded in myth, and that includes just where the name comes from. The familiar story is that when Eliot Handler saw the first models from designer Fred Adickes, he remarked: “those are some hot wheels you’ve got there.”
Another version is that Handler just blurted the name out in a meeting with a designer. Regardless, it just stuck to become one of the most popular toys on the planet.
2 They’re Number One…Because They Remain So Cheap
In the ranks of the most popular toys on the planet, Hot Wheels dominates. They’re not just the biggest toy vehicle sellers but also the number one selling toy in the entire world. The reason is that in many markets, the cars can still go for only a dollar each.
True, they can be put out in packs, and some nations charging a few bucks more. But many stores do sell the cars for less than a bottle of water, which is the reason they are so dominant.
1 Its Creator Was Married To Barbie’s Creator
Elliott and Ruth Handler were the First Couple of the toy world. The two had founded Mattel as a picture frame company in 1945. While making a dollhouse, Ruth decided to craft a series of dolls she named Barbie.
It was an instant hit to make Mattel a success. Elliott then realized how a toy car line could be great for boys to craft what would become Hot Wheels. The two remained together until Ruth’s death in 2002 (Elliott passed on nine years later) to be icons of their industry.
Sources: Mentalfloss.com, hotwheels.com, hotwheelsmedia.com, thrillist.com
Both cars retail for about $81,000, but one is a lot more accessible.
SPEED PHENOM ON YOUTUBE
If you’ve got $80,000 to spend and want an American high-performance car, now’s a pretty good time to be in the market. In addition to tire-shredding stalwarts like the Camaro ZL1 and Challenger Hellcat, Ford and Chevy have recently launched high-profile, track-ready sports cars. And thanks to a new video by Speed Phenom, we now know how they directly compare on track.
Naturally, we wanted to do this comparison ourselves. But the GT500 wasn’t ready during our Performance Car of the Year competition when we had an early C8 to test. And now that both cars are on sale, stay-at-home orders and track closures mean we’ll have to wait for an opportunity to do a full R&T comparison.
In the meantime, Speed Phenom does a good job of breaking down how they perform. With the caveat that he’s got a base model GT500 without the optional Pilot Sport Cup 2 tires, he notes that the car struggles for grip more often than the similarly-tired Corvette. It’s also less composed through mid-corner bumps, with slower cornering all around. Thanks to its massive horsepower advantage, though, it jets through straightaways.
The C8, meanwhile, benefits from serious mechanical grip. The better-balanced midship car fires through corners and has no problem putting its power down. That makes it more approachable, not surprising given that it’s the tamest version of the C8 while the GT500 is stretching the limits of the S550 platform. We’re sure to see more track-ready Corvettes soon, but for now the Stingray is a surprisingly capable start.
Mack Hogan- Road&Track
Even off the pavement, the new ‘Vette is a rocket ship.
The 2020 C8 Chevy Corvette is a fast car. In base form, it can hit a staggering 194 mph flat-out. Even with the drag-inducing Z51 performance package, the car can still do 184. Hennessey Performance took theirs to 182 mph with ease before they turbocharged it to oblivion. Now, there’s another C8 top-speed run on the internet, and this time, it takes place on a dry lake bed.
Popular YouTube TheStradman took his new Z51-equipped Corvette to a dry lake bed in Utah to test out the top speed of the car. He managed to hit an impressive 173 mph before slowing down—not bad considering the uneven and bumpy surface. It helps that there’s absolutely nothing for miles in either direction. In fact, from inside the cabin, it looks a bit uneventful. Here’s a perspective from outside the car to give you a sense of how fast 173 mph is:
If the base Corvette is this quick right out of the box, we’re curious to see how the upcoming Z06 stacks up. Considering the last-gen car could hit 200 mph, we’re expecting big things.
Source: Brian Silvestro; for RoadandTrack
The Goldilocks zone of Corvette C8 interiors?
By now, you should know that Chevrolet has started deliveries of the mid-engine 2020 Corvette. Lucky owners of the ‘Vette C8 are starting to receive their newest toy and most likely you’ve already seen one on the streets – that’s if the state you’re in is not affected by the coronavirus lockdown.
If you’re among those who are planning to purchase the new Corvette but are undecided with the trim level to choose, this video might be able to help you – especially if you’re particular with a car’s interior.
The Corvette C8 comes with three trim levels: 1LT, 2LT, and 3LT. The differences lie mainly in the features offered on each trim level, which defines that the cabin will look and feel like. That’s pretty important, considering that we spend so much time inside the car rather than staring at our investment from a distance. So, here’s a little guide.
The base 1LT trim isn’t really basic. With the entry-level trim, you already get the GT1 seats wrapped in mulan leather, a customizable 12-inch gauge cluster, push-button ignition and keyless entry, and an 8-inch Chevy MyLink infotainment system with Apple CarPlay and Android Auto, 4G LTE Wi-Fi, and 10-speaker Bose sound system. The Corvette 1LT trim is available in three color options: black, gray, or red.
Going up the 2LT trim gives you more interior color options plus features like a rearview camera mirror, a colored head-up display, heated/cooled seats, heated steering wheel, advanced blind-spot monitor, and rear cross-traffic warning. The infotainment gets upgraded as well with a wireless charger and a 14-speaker Boss audio system.
Finally, the 3LT trim dials up the ante by adding a premium Nappa leather with suede microfiber accents – all in combination with the GT2 seats that have more bolsters. These seem not a lot but the range-topping trim adds luxury to the sports coupe.
If you’re still undecided, watch the 2LT interior review on top of this page to check whether you need to take it down a notch to 1LT or go all out on the top-level 3LT.
Source: HorsePower Obsessed
The etiquette of doing something you do regularly while staying safe and clean.
- We might need new gas-pumping etiquette rules for the 21st century, both for selfish and altruistic reasons.
- We’ve known since 2011 that gas pump handles can be filthy—they’re worse than ATMs or escalators, even—but there’s no reason to worry if you take the right precautions.
- You can lower your risk by using gloves or paper towels to gas up, using touch-free pay options, and staying as physically separate from others as possible as you refuel.
You may have heard this one before: the best way to avoid catching some sort of communicable disease is to wash your hands well, and often. This advice isn’t exactly new, which hints at how reasonable and responsible it is.
Washing your hands to stay clean was the takeaway lesson from a 2011 study conducted by Kimberly-Clark Professional, which found gas pump handles were “the filthiest surface that Americans encounter on the way to work,” according to Reuters. The Los Angeles Times reported back then that the study found 71 percent of gas pump handles the Kimberly-Clark researched tested were considered “‘highly contaminated’ with the kinds of germs most associated with a high risk of illness.” Compare that to only 41 percent of ATM buttons and 43 percent of escalator rails.
The Kimberly-Clark Professional tests were done in big cities (Atlanta, Chicago, Dallas, Los Angeles, Miami, and Philadelphia) almost a decade ago, but when something like the coronavirus impacts pretty much every corner of the world, it’s a good reminder to take care when gassing up. When it comes to the COVID-19 coronavirus specifically, the National Institutes of Health has issued information that explains that coronavirus can be stable for 24 hours on some surfaces like cardboard and “up to two to three days on plastic and stainless steel.”
If you’re not already carrying disinfecting wipes in the car with you, this is a good time to start, assuming you have some available, and wipe off the pump handle and touchscreen, or any other surfaces you plan to touch, before your hands make contact. Even better, it might be a good idea to search out a station that accepts contactless payment at the pump, so you won’t need to come into physical contact with the touchscreen or anything else other than the pump handle. Two easy solutions to this issue are to either wear gloves or to use the paper towels commonly provided for window cleaning as a guard between your hands and the screen, buttons, and pump handle. Keeping gloves in the car is a good idea, but they shouldn’t be the disposable sterile gloves that hospitals can use when there’s a need for them there. If you don’t have gloves, keep some hand sanitizer in the car to use on your hands after filling up.
As for social distancing, it’s convenient that gas pumps are relatively far apart from one another, contagion-wise, but even so, choosing to fill up your tank at an off-peak time can be safer. If there are other people getting gas at the same time, keeping at least six feet between you and them is a good idea for everyone involved. And it should go without saying that you shouldn’t go into the store unless there’s a reasonable need to do so if there’s still a rapidly spreading disease going around.
The actual chance that you will catch a transmittable viruses at the gas station is low. As the Illinois TV station ABC-20 reported based on answers from a medical expert, the sequence of events that have to happen to get the virus from someone who has it (someone coughing onto the pump handle or touching the touchscreen with virus on their hands, and then you touching it and then your face) can be interrupted in any number of ways. Even so, there’s no harm in being extra careful in these potentially dangerous times.
Sebastian Blanco- Car and Driver
It took 30 hours for Hennessey Performance Engineering to tear apart a new 2020 Chevrolet Corvette, install twin-turbo setup, and put it back together.
It’s no surprise, then, that the twin-turbo C8 Corvette isn’t ready to be sold to customers. The engine lacks intercoolers and Hennessey hasn’t cracked the code of GM’s new electrical architecture to reprogram the ECU.
“This is just the beginning, our own car, doing R&D,” company founder and CEO John Hennessey told Motor Authority.
On Monday, the engine made 643 horsepower and 570 pound-feet of torque at the wheels on a Dynojet dyno while running just 5 psi of boost. That compares to baseline testing HPE performed on the stock car which revealed 466 hp and 451 lb-ft of torque. HPE plans to offer a 1,200-hp version of the C8, which Hennessey said could make 18-20 psi of boost.
Hennessey took delivery of an orange C8 Corvette in Detroit on March 13. He and his daughter, Emma, drove back to the performance outfitter’s Texas headquarters and performed baseline testing before the Hennessey team tore apart the car.
The orange C8 fired back to life on Friday with twin 62-mm Precision Turbos and twin blow-off valves connected to the throttle body mounted behind the catalytic converters. Both turbos are oil-cooled with twin scavenge pumps that feed back into the motor.
The system is not intercooled. Instead, there’s a methanol injection setup to keep things from getting too hot. HPE is considering where to put intercoolers. The current packaging has limited space for intercoolers without cutting into trunk space, which Hennessey does not want to do. 2020 Chevrolet Corvette Stingray undergoes twin-turbo conversion at Hennessey
Hennessey told Motor Authority his team currently can’t tune the factory ECU, but it is looking at aftermarket solutions for the engine management system. He noted it took a year for solutions to come to market for the C7 and added, “hopefully, it won’t take a year.”
Hennessey said when the turbocharged C8 was first started it didn’t throw any codes, errors, or a check engine light. “The computer seems happy with the turbos,” Hennessey noted. A check engine light did appear when the front wheel speed sensors were disconnected to put the car on the dyno, Hennessey said.
The orange C8 will used for R&D of upcoming modifications. Hennessey said he doesn’t expect to deliver modified customer C8s for at least six months, and all will have intercoolers and full plumbing.
Joel Feder for Motor Authority
Did you see the two race on YouTube? We’ve tested them, too; here’s why the results were no surprise.
- We have tested both the 2020 Chevrolet Corvette (11.2 seconds at 122 mph) and the 2020 Ford Mustang Shelby GT500 (11.4 seconds at 132 mph) in the quarter-mile.
- A video on YouTube, however, shows flipped results: 11.5 seconds at 120 mph for the Corvette and 10.8 seconds at 132 mph for the GT500.
- As always, the driver and track conditions are critical, and our two-run average is far more repeatable than any one-off run at a drag strip.
When we tested Ford’s new 2020 Mustang Shelby GT500 against the top-dog 2020 Chevrolet Camaro ZL1 1LE, the Mustang came out on top on the drag strip. But how does the front-engine Shelby stack up against the other, now mid-engine, threat from Chevy?
Greg PajoCar and Driver
During our testing, the GT500 hurtled through the quarter-mile in 11.4 seconds at 132 mph. But that was on a regular street-like surface, not a sticky, prepped drag strip. We struggled mightily with traction at launch, and our best run was with the launch control set to the lowest rpm allowed (1200 rpm) to prevent igniting a rear-tire fire. However, no surprise: with more traction far, better numbers are possible, and we’ve seen numbers below 11 seconds at drag strips, including this kid, who ran a 10.665 shortly after he acquired the car.’Murica Which Ultimate Pony Car Is the 1/4-Mile King?This Kid Ran a 10.66 Quarter Mile In His GT500
On the other hand, the 2020 Corvette has far fewer launch struggles, as it benefits from its newly acquired mid-engine layout and rear weight bias. Moving the weight distribution rearward improves launch traction, helping it jump off the line much quicker. During our testing, and despite far less horsepower, the mid-engine Vette outaccelerated the GT500 through the quarter-mile by two tenths of a second, reaching it in 11.2 seconds at 122 mph.Advertisement – Continue Reading Below
We’re starting to see other people’s numbers from both of these cars, though, as customers are starting to take deliveries of their C8 Corvettes and GT500s. Contrary to our test results, there’s a video circulating on YouTube that shows the new GT500 beating the C8 Corvette through the quarter-mile by seven-tenths of a second. It raced to the quarter-mile in 10.8 seconds while the Corvette reached it in 11.5 seconds.
Keep in mind that the driver and conditions are huge factors in quarter-mile and acceleration results. We suspect that here, the Corvette likely got bogged down on the high-grip surface, as the launch control isn’t optimized for those conditions, and the 760-hp Mustang benefited from the extra traction on the track.
Connor Hoffman for CarandDriver
William Walker: Photographer Manufacturer Photographer Mar 11, 2020
It’s weird to say, but immediately after my first test drive in the new mid-engine, eighth-generation 2020 Chevrolet C8 Corvette, I was angry. Angry not because the car didn’t do what it should, but precisely because it did everything I asked of it, and did it beautifully—and I’d been led to believe it was a hot, understeering mess by the reviews I’d read elsewhere. How could they all have been so wildly off base?
There are many possible explanations, of course—differing driver skill levels, evaluation methods, and conditions. But two variables stand out among the rest: the C8 Corvette’s option for track or street alignments, and the length of exposure to the car. Addressing the latter issue first, we were lucky enough to spend the better part of week with the new C8, a rare chance given the limited availability of test cars so early in the Corvette’s production (All-Stars testing took place in early December 2019). That greater exposure to the car allowed us more time to get a feel for its behavior in a wide array of situations, both on the road and on the Streets of Willow Springs racetrack.
Perhaps even more importantly, however, was the choice of track and street suspension alignments. You see, the 2020 C8 Corvette has two official specifications for its alignment settings; the street alignment sets the camber at 0 degrees, while the track alignment sets the camber to 3 degrees negative. The result is the difference between a (somewhat) understeer-biased street setup and a balanced, ready-to-rotate super sports car. The former is intended to help Corvette owners new to the world of low polar-moment mid-engine cars make the transition without ending up backward in a guardrail their first time out. We spent our week with the Corvette in track-alignment mode, whether hammering out laps or zooming around the mountains near Lake Hughes.
But wait, isn’t that cheating, you ask? It might seem like it at first—track settings are meant for the track, not the street, right?–but Chevrolet itself recommends owners who use the track setting for track go ahead and leave the car setup that way all the time. No, it won’t cause excessive or premature tire wear, at least according to Chevy’s engineers. For the record, we did visually notice more wear to the front tires’ inside shoulders than we’d expect with the more conventional setup, so we’d be curious to see the state of the rubber after 5,000 or so miles with this alignment. It’s certainly something for owners to be aware of and to keep an eye on, at the very least.
Regardless, and not for nothing, the two alignment settings might better be named “beginner” and “advanced”. If you’re a moderately accomplished driver who’s comfortable with a car that’s willing to rotate, don’t leave the lot with your new Corvette until you’ve had the car set to its more aggressive alignment.
With that out of the way, holy cow, is this thing good! The nearly instant-on torque from the 6.2-liter V-8 means you’re never left wanting for thrust, the quick-shifting eight-speed dual-clutch transmission bangs out upshifts with authority, and the steering feel, while not telepathic, is still abundantly communicative. Detroit bureau chief Todd Lassa did note, however, that several of our evaluators found “the steering in its own separate Track mode is too heavy without doing anything for feel,” and resident professional race driver Andy Pilgrim pointed out, “The gearbox is very good on the street, but did not always give me the lower gear I wanted on the track.” If those are the worst things we could think to say after back-to-back runs in hardware as exotic as the $474,000-plus Ferrari F8 Tributo and the nearly as pricey McLaren GT, it’s pretty apparent the mid-engine Corvette is something special.
Braking is remarkably stable for a mid-engine car, as is power application, the latter thanks at least in part to the car’s Performance Traction Management system. Chevy’s PTM is one of the key technology transfers from the factory Corvette Racing program, and it shows its racing roots when put to the test. But of course even the best traction-control programs can’t work when the tires aren’t in contact with the road; that’s where the Corvette’s excellent suspension tune comes in.
“Glides over broken mountain roads like a hovercraft—but still sticks like crazy,” wrote contributor Arthur St. Antoine in his evaluation notes. Pilgrim agreed, noting the C8 Corvette “has more suspension travel than the Porsche 992, and feels more compliant, allowing more roll in transition; none of which is a bad thing for everyday driving comfort.”
In fact, far from a rabid, on-the-edge supercar, it’s clear the Chevy engineers behind the new C8 Corvette put a great deal of time and effort into the car’s daily driving demeanor, or, as features editor Rory Jurnecka noted, “It should make a nice road car with good interior space. Feels pretty easy to live with.” Not only is there a rear trunk that’ll fit two golf bags (or several carry-on bags or backpacks), there’s a front trunk (or frunk) that’ll hold some more. But the new C8 Corvette’s interior is what truly stands out in terms of daily comfort, especially in comparison to previous Corvettes.
“When I took the C8 on the road trip between the hotel and the winners’ shoot location, I was blown away at how good of a GT car it is,” social media editor Billy Rehbock said. “I put on the cooled seats, played music over the crystal-clear sound system, and rolled in complete comfort. My only complaint was that it was actually a bit quiet, even when being driven hard, but subsequent performance versions will fix that, no doubt.”
Beyond even the excellent interior feature set (though the verdict is still out on the extra-long button strip in the center console), the most notable and immediately noticeable upgrade to the C8 Corvette’s interior is the massive improvement of materials and build quality over previous generations. Our test car’s 3LT interior trim specification included Chevy’s upgraded infotainment system, a 14-speaker Bose audio system, and a head-up display. And in addition to the upgraded materials, it featured extended leather surface treatments, and GT2 bucket seats—though ours swapped the GT2 seats for “competition sport bucket” seats for an extra $500); the 3LT spec added $11,950 to the car’s $59,995 base price. Tack that cash onto the additional list of optional extras like the Z51 performance package ($5,000), magnetic ride control suspension system ($1,895), front lift system ($1,495), upgraded 19-inch front/20-inch rear wheels and tires ($1,495), and engine appearance package ($995), among others. Total price, as configured: a surprisingly reasonable $83,825.
Admittedly, this was a pre-production car, but it was also one of just a handful of streetable C8 Corvettes available at the time, meaning it had already lived a rather hard life before our testing even began. Sitting in the C8 back-to-back with the Ferrari F8, the Italian doesn’t come off as insanely luxurious or refined—and the F8’s interior is already perfectly lovely.
It’s no revelation that the 2020 Chevrolet C8 Corvette is a great performance value; the Corvette has been that way for decades. But for Chevy to have done such an impressive job on its first go with the engine behind the driver, and to have included so many improvements to the luxury and quality of the C8, all for a price that’s a fraction of the cars with which it competes, it’s easy to see why I was so angry after experiencing the car for myself—and it’s hard not to agree with Jurnecka when he says, “So glad this car is what I’d hoped for. Worth the wait.”
Nelson Ireson for Automobile
All-new 2020 Chevrolet Corvette is now on sale, and buyers are lining up
With deliveries of the all-new 2020 Chevrolet Corvette beginning this month we know there are a lot of very excited Corvette buyers out there who are just now getting familiar with Chevrolet’s newest sports car. What drove those shoppers to the new eighth generation Corvette C8, and what are they likely discovering as their ownership experience begins?
We’ve been fortunate to drive the new Corvette on multiple occasions, on both public roads and at a closed course race facility. This has given us sufficient seat time to understand the 2020 Chevrolet Corvette’s upgraded design cues and capabilities. We could make a nearly endless list of why people want the new Corvette, but here are the top 10 reasons we think new, and prospective, Corvette buyers are lining up to sample Chevrolet’s latest supercar.
- Zero-to-60 Performance: The 2020 Chevrolet Corvette’s “base” 6.2-liter V8 engine makes 490 horsepower and 465 pound-feet of torque. That’s enough power and twisting force to catapult the Corvette to 60 mph in 3 second flat. Spring for the $5,000 Z51 performance package, with 495 hp and 470 lb-ft, plus more effective engine cooling, more advanced brake and suspension components, stickier Michelin Pilot Sport 4S tires, along with aerodynamic enhancements, and the Corvette can hit 60 mph in 2.8 seconds.
- Exceptional Value: The 2020 Corvette starts at a meager $59,995, including delivery charges. Once again, that price includes a zero-to-60 time of 3 seconds flat, making the new Corvette not only one of the quickest street-legal cars you can buy, but one of only a very few cars capable of hitting those numbers for less than $100,000. The Corvette has always offered exceptional “bang-for-the-buck” performance specs. The C8 takes this longstanding Corvette tradition to new dimension.
- Top Speed=194 MPH: Not that we endorse going almost 200 mph in any vehicle, and certainly never on a public road. But – IF you have a safe, closed course facility to do it – the Corvette can indeed hit 194 mph. That’s in base form, at the $59,995 starting price. Pro tip: ordering the Z51 performance package actually reduces the car’s top speed even at it improves the Corvette’s zero-to-60 time. The Z51’s aggressive aerodynamics increase downforce, but the added drag reduces top speed to “just” 184 mph.
- 8-Speed Dual Clutch Transmission: Unlike a traditional manual transmission (which is not offered on the new Chevrolet Corvette), a dual-clutch transmission (DCT) has the benefit of keeping the rear wheels connected to the engine, even while shifting The “dual” in dual clutch means the incoming gear is engaged even before the outgoing gear is disengaged. This makes for shifts in under 100 milliseconds, far quicker than a human. The transmission’s design and placement also lowers the Corvette’s center of gravity.
- Magnetic Selective Ride Control: General Motors perfected this advanced active suspension technology years ago. How perfect? Ferrari licenses the use of this tech from GM for its own cars. When buyers equip the new Corvette with the FE4 $1,895 option they’ll have multiple driving modes, including Tour, Sport and Track. This enables a smooth, comfortable ride during relaxed driving conditions or track-ready stiffness when driving a 2020 Corvette on a closed course. It’s the definition of the “best of both worlds”.
- Cargo Capacity: A sports car with functional cargo capacity is relatively rare, and a 3-second sports car with 13 cubic feet of cargo capacity is unheard of…until now. The new Corvette has adequate space behind the engine to fit two full sets of golf clubs, while a front trunk, under the hood, can swallow a large carry-on bag with room leftover. We’re not sure how often Corvette owners actually pick up a buddy to hit the links, but for those that do, the 2020 Corvette is ready and willing, with cargo space to spare.
- Fuel Efficiency: Yet another longstanding Corvette character trait that continues in the new Corvette. Between the car’s slippery shape, torque-laden engine and 8-speed transmission there’s the potential for very little energy expenditure while cruising at a steady highway speed…assuming the driver’s goes light on the throttle. If he does, the new Corvette can deliver between 25 and 30 mpg.
- Driver-Focused Cabin: Everything from the squared-off steering wheel to the 12-inch, reconfigurable gauge cluster to the driver-angled 8-inch touchscreen confirms the Corvette’s performance-oriented purpose. The smaller front-end provides excellent forward visibility, which adds to driver confidence when navigating corners, and all three seats options provide excellent lateral support while remaining comfortable for long drives. The days of disappointing Corvette cabins are finally in the rearview mirror.
- Open Air Cruising: The new Corvette comes as a coupe or convertible, but even in coupe form the Corvette’s roof panel is easily removed and securely stored in the rear cargo area. The convertible uses a retractable hardtop design, the first in Corvette history, that folds away in 16 seconds at speeds up to 30 mph. Powered by electric motors, the Corvette convertible offers the same coefficient of drag as the coupe, with two cool nacelles behind each seat to smooth airflow at higher speeds.
- So Many Options: Almost as exciting as the new Corvette’s performance and value is the car’s range of personalization. The option list long, and can’t be remotely covered in this top 10 list. So head over to the Corvette Configurator and play with exterior colors, interior colors, stripe designs, seat designs, wheel designs, performance upgrades and exterior accents to your heart’s desire. But be prepared to spend quite a long time there. And don’t say we didn’t warn you.
Karl Brauer for Forbes
Oh ZR1, how quickly we have forgotten you and moved on to the C8. But then comes along a video like this that reminds us that even with an engine upfront, you are still one of our favorites!
All kidding aside, the 2019 Corvette ZR1 is one of our favorite Corvettes of all time particularly because of the things it could do, like shooting down a former Space Shuttle runway at Cape Canaveral at nearly 200 MPH!
Typically we see these high speed runs with a ZR1 that has the ZTK’s High Wing. This Long Beach Red Corvette ZR1 has the low wing for less drag and it seems to definitely show off its speed in this standing mile run in which the Corvette reached a top speed of 191.16 MPH.
Two views are shown including the in-car with telemetry overlay on the screen. We see the car was still accelerating past the mile and we’re excited as they tell us that two more videos coming that show the ZR1 also running 2.3 miles and 2.7 miles down the runway.
The video comes the Johnny Bohmer Proving Grounds on Merritt Island Florida. Previously we have seen the Genovation GXE Electric Corvette run on the same track and in fact, it might be interesting to compare the two cars after the ZR1 shares the two final runs
From Johnny Bohmer Proving Grounds via YouTube:
As we continue to digest all the new information that came out of last week’s First Drive Event with the 2020 Corvette Stingrays in Las Vegas, there is a new “Mode” to discuss that most Corvette enthusiasts have never heard of.
The 2020 Corvette Stingray has several “modes” that help drivers get the most out of their cars. We are already familiar with the regular driving modes that feature settings for Weather, Touring, Sport and Track, as well as the two customizable modes called MyMode and Z-Mode. But what you may not be aware of is that the 2020 Corvette Stingray’s equipped with Magnetic Ride Control also features a “Flying Car” mode.
Well, it is the 21st century after all!
Corvette’s Vehicle Performance Manager Alex MacDonald is responsible for the chassis tuning of the new Corvette and he was tasked with explaining much of the on-track performance capabilities of the new Corvette to those at Spring Mountain last week.
For the C8 Corvette, engineers have rolled out version 4.0 of Magnetic Ride Control with the biggest change to the system is the use of accelerometers rather than position sensors that measured wheel height. Here is the slide that was offered on the new Mag Ride for the C8 Corvette:
The Magnetic Ride Control is tied into the Corvette’s Performance Traction Management system and that’s where the Flying Car Mode comes into play.
When your crest an incline and the Corvette’s wheels are off the ground, they will spin faster like they are on ice or another slippery surface because there is no resistance. The performance traction control senses that and sends commands to slow the wheels. But that’s not the best reaction when on the track. The system now senses when the car’s front wheels leave the ground (and assumes that the rears will be leaving as well), and the system tells the performance traction control to ignore it because it knows that it’s temporary and that all four wheels will be back on the ground momentarily.
Here is Alex talking about the Flying Car Mode:
“The other interesting note about MR is that it communicates with the performance traction system and it tells that performance traction system that if the front wheels have just gone over a big crest that we know that one wheel-base later the rear is about to go over that same crest, we can adapt the traction control to work in that situation and we call that Flying Car Mode, which is a cool name for it, because it does detect when the car is airborne and we can alter the chassis controls to deal what happens when the car lands.”
Video by Keith Cornett
From an acclaimed concept car John DeLorean reportedly dismissed because he wanted something “smaller and more European,” to the design that ended a feud between a pair of GM giants — but may have set the Corvette back decades — a trove of unique documents, sketches and models tells a secret history of the 60-year quest to build a mid engine Chevrolet Corvette.
The story begins in the late 1950s with legendary Corvette chief engineer Zora Arkus-Duntov and came to fruition when the first mid engine 2020 Corvette Stingray sold for $3 million at auction in January.
Titled “The Vision Realized: 60 Years of Mid engine Corvette Design” and created by GM Design Archive & Collections, the exhibit included 19 original sketches by designers including Larry Shinoda and Tom Peters, the massive 4-Rotor rotary engine from the 1973 Aerovette engineering, a wood wind-tunnel model, even letters from Arkus-Duntov’s personal files.
“The story of the mid engine Corvette is incredibly complicated, full of fits and starts,” said Christo Datini, manager of the GM Design Archive & Collections.
Cristo Datini at the General Motors Warren Technical Center in Warren, Michigan on Friday, January, 31, 2020 (Photo: Eric Seals, Detroit Free Press)
A mid engine Corvette was a dream shared by GM designers and engineers. The layout, in which the engine is behind the passenger compartment and immediately over the rear wheels, improves acceleration and handling. It’s been a mainstay at Ferrari for decades, and inspired repeated design and engineering projects at GM. None of them made it to production till now, largely because the Corvette’s original front-engine layout was so successful.
“Why would we change the Corvette?” GM chairman and CEO Richard Gerstenberg said to Arkus-Duntov before both men retired in the mid-1970s. “We sell every one we can make.”
‘Design without limit’
A generation of GM designers and engineers had already fought that attitude toward the sports car that debuted in 1953 model, and a couple more would before the midengine eighth-generation C8 Corvette Stingray debuted last year.
The exhibition included dozens of sketches, models, photos and documents.
“Our mission is to preserve the heritage of GM Design and educate our designers on GM’s prominence in the world of design,” Datini said. The archive also is working with the Detroit Institute of Arts on a massive exhibition dedicated to automotive design that opens this summer.
The Corvette exhibition closed at the end of January, but elements of it are likely to be displayed at other events and locations, possibly including the National Corvette Museum in Bowling Green, Kentucky, which provided materials for the collection.
Original magazines with drawings of what Corvettes could have looked like on display at the General Motors Warren Technical Center in Warren, Michigan on Friday, January, 31, 2020 (Photo: Eric Seals, Detroit Free Press)
Chevrolet Engineering Research Vehicle I, Also called SERV I and XP-708, was the beginning. A running model that debuted in 1960, the car had the looks of an Indy car and a chassis that tested what a midengine layout could do. It was “a design without limit” and an “admirable tool” to help Chevy figure out “what to put in Corvette,” said Duntov, himself a former driver in the 24 Hours of Le Mans sports car race.
CERV I was used as a test vehicle for years. Larry Shinoda, who would go on to be known as the father of the ’63 Corvette Stingray and the Mako Shark concept car, tweaked its design repeatedly as engineers tested it with seven different power trains.
GM eventually retired CERV I, selling it to the Briggs Cunningham Automotive Museum for $1. When the museum failed in the 1980s, GM bought it back for “somewhat more,” Datini said.
A model of the 1968 Chevrolet mid-engine Corvette Roadster that is one of many items for General Motors workers to see at the Corvette design display at the General Motors Warren Technical Center in Warren, Michigan on Friday, January, 31, 2020 (Photo: Eric Seals, Detroit Free Press)
Corvettes the world never saw
Shortly thereafter, Duntov heard rumors Ford was developing a Le Mans racer to challenge Ferrari and launched work on CERV II. GM decided not to race, Ford and Carroll Shelby built the GT40 that inspired “Ford vs. Ferrari,” and the CERV II was used as an engineering test bed at secret proving grounds and never seen by the public during its active lifetime. Built in 1964, CERV II had a 500-horsepower V8, 210-mph top speed and 2.8-second 0-60 mph time.
A picture of the CERV II Corvette. The sports car never went into production but it was influential in the design of the C5 production Corvette. (Photo: Eric Seals, Detroit Free Press)
“By that time, engineers and designers knew a midengine chassis was necessary” to get maximum performance from the ‘Vette, Datini said. Putting the engine behind the passenger compartment puts the car’s weight over the rear wheels to put down more power without spinning. Shifting balance from the production ‘Vette’s nose-heavy weight distribution would also improve handling.
Also in 1964, the XP-819 experimental car was being tested. Designed by Shinoda, it bore a strong resemblance to 1970 Corvettes, but Duntov hated it, calling it an “ugly duckling” at least in part because he wished his engineering team got some of the budget allotted to designing the car. It had a 327 cubic-inch V8 and pop-up headlights.
Like many concept and engineering vehicles, XP-819 was destroyed, chopped up. Years later, the pieces were found in NASCAR designer and mechanic Smokey Yunick’s garage.
Half Corvette, half Porsche
With a name GM would later recycle on a minivan, the Astro II XP-880 was never publicly identified as a Corvette, but it was one, intended for production in 1970, but never got there. It debuted at the New York auto show, featuring a nose, front fenders and Firefrost Blue paint that that foreshadowed 1970s production cars.
DeLorean, then Chevrolet general manager, asked for a rush program to create a different midengine design to match the midengine Pantera Ford was developing with Italian sports car maker De Tomaso to debut at the 1970 New York auto show. The XP-882 had a tapering body with dramatic fender flares and a louvered rear window like the Mako Shark II concept car. Like so many midengine ‘Vettes before and after, GM brass decided to stick with the tried and true front-engine layout.
Also in the 1970s GM president Ed Cole — another legendary engineer who led the development of the small block V8 and catalytic converter, among other achievements — became enamored with the Wankel rotary engine. Duntov built two midengine experimental ‘Vettes with rotary engines, glad for Cole’s support despite not sharing his enthusiasm for the engine.
Sketching and notes about the Corvette, one of the many originals on display for workers to see at the General Motors Warren Technical Center in Warren, Michigan on Friday, January, 31, 2020 (Photo: Eric Seals, Detroit Free Press)
The 1973 Corvette 2-Rotor XP-987GT was a smaller, European-scale sports car with a rotary engine. The body was all Corvette, but its chassis came from a Porsche 914. Italian design house Pininfarina built its body. GM displayed the 2-Rotor at auto shows in Frankfurt and Paris before the car disappeared, probably sold to a collector.
Bill Mitchell’s most beautiful car
At the same time, Duntov wanted to develop a bigger midengine Corvette. He and Cole hadn’t been on speaking terms since Duntov refused an annual bonus he thought was insultingly small. They made up, at least in part because Duntov wanted a budget to develop what would become the Corvette 4-Rotor Aerovette, an iconic, gull wing design. Duntov believed it was the most beautiful vehicle GM design chief Bill Mitchell oversaw in a career that included the ’57 Chevy Bel Air and ’66 Buick Riviera.
Duntov recycled the XP-882’s chassis for the Aerovette, which featured silver leather interior trim.
A picture of the Aerovette featuring bi-fold gulping doors in the sports car that was never made. It is one of many photographs, drawings and sketches on display on all things Corvette design inside the General Motors Warren Technical Center in Warren, Michigan on Friday, January, 31, 2020 (Photo: Eric Seals, Detroit Free Press)
Despite the car’s striking appearance, Duntov would come to believe his agreement to use a rotary engine was a nail in the midengine ‘Vette’s coffin.
Despite that, another midengine engineering car arrived in 1974. The XP-895 began its life with a steel body. Intrigued by the idea of lightweight materials, DeLorean asked Reynolds Aluminum to create an aluminum body. That cut the car’s weight by nearly 40%, but DeLorean pulled the plug on the project because he wanted a smaller, more European design.
That never happened, and design work on midengine ‘Vettes came to a halt for more than a decade, as GM struggled meeting the challenge of higher fuel prices.
Closing the deal
By 1986, the quest for a midengine Corvette was ready to create another giant figure, and it got one when a young designer named Tom Peters began work on the Corvette Indy concept car. Peters went on to become the chief designer of the sixth- and seventh-generation C6 and C7 Corvettes and play a key role in starting work on the 2020 C8.
With a radically short hood compared to production ‘Vettes and cutting-edge technologies including four-wheel steering, traction control and active suspension, the Indy — so named because it used a 2.65L V8 Chevy developed for Indy Car racing — kept dreams of the midengine ‘Vette alive
The 1990 CERV III — this time the C stood for “Corporate,” not Chevrolet Engineering Research Vehicle — was the next step. Datini’s research convinced him it was an attempt at a production version of the Indy.
CERV III had scissors doors and was built of Kevlar, carbon fiber and aluminum. With a 650-hp twin-turbo 5.7L V8, GM predicted a top speed of 225 mph. It debuted at the 1990 North American International Auto Show in Detroit.
After that, work on the midengine Corvette went undercover for two decades. Photos of disguised prototypes at test tracks surfaced from time to time, but the car seemed to be as much myth as metal. There are whispers the Great Recession halted work on one, setting development back years.
A display of Zora Arkus-Duntov known as “The Godfather of the Corvette” at the General Motors Warren Technical Center in Warren, Michigan on Friday, January, 31, 2020. (Photo: Eric Seals, Detroit Free Press)
Development of the 2020 Corvette Stingray began around eight years ago, a long time for most projects, but the blink of an eye when it’s the last chapter of a 60-year story.
Mark Phelan for Detroit Free Press
Following Jeremy Welborn’s insightful post last week on Customer Ordered 2020 Corvette Production Starting, a reader left a comment about stopping by the Corvette Assembly Plant and seeing twenty-five C8 Corvettes in the parking lot. Thanks to Jeremy’s follow-up, Jay sent us some of his favorites that he took and gave us permission to share.
We’re calling this Corvette Heaven Part II as it seems to dovetail perfectly with yesterday’s blog post with an instagram video showing fifteen 2020 Corvettes lined up in a row.
From Jay Shellabarger:
I was at the Bowling Green Assembly Plant and Museum to see Shane for my Museum Delivery on Thursday, January 30th from 2:30pm to 4:30pm. I went directly to the Assembly Plant and looked at twenty-five C8 Corvettes in the parking lot and I took a hundred photos. I had been told all the pre-production cars would be smashed. I read where you state the VIN numbers are 5100001. Starting with 51 and all the cars I saw started with 50. I took photos of the VIN numbers too. I saw cars 5000028 (#28), 30, 56, 62, 124, 137, 138. 139 many up to number 5000375 (#375). I had a fun afternoon driving into the different parking lots (including employee parking lots) and looking at the C8’s produced. They are simply BADASS looking and I can’t wait to obtain my white C8.
Jay managed to capture nine of the twelve colors and several cars have full-length body stripes. We noticed that Jay also captured a Sebring Orange 2020 Corvette Stingray Coupe wearing thr 5VM Visible Carbon Fiber Aero Kit:1
Jay tells us he has an Arctic White C8 Coupe on order and he is customizing it with the High Wing and he also tells us he’ll be adding his own stripes to the car as well as chrome wheels! Sounds like a stunner, Jay!
Here’s the photos of the C8 Corvettes from the Bowling Green Assembly Plant last week:
Photos by Jay Shellabarger
There’s A New Engine In The C8.R Corvette, And It Sounds Nothing Like Its Predecessor.
They say beauty is in the eye of the beholder, and although that’s true, it can also be in the ear of the listener.
Since the Corvette first hit the streets back in the 1950s, it was imbued with the beautiful and nearly magical sound of V-8 performance. It was a deep, bass-filled rumble that just oozed a feeling of power. Over the years, the sound emanating from Corvettes, both on the street and at the track, had a distinctive note that became synonymous with the car. When the Corvette moved to the LS1 in 1997, the firing order was tweaked a bit, and although the sound did change, it still had that deep rumble that we all love.
But the only thing constant in the world is change. For the C8.R, Chevrolet Racing really changed things up with its new mid-engine marvel, but it wasn’t the engine placement that ended the car’s iconic sound signature. It was the engine itself. Gone is the deep baritone exhaust note, replaced instead with a high-pitched Ferrari-like sound. Think puberty in reverse. And although we love the sound of a wound-out Ferrari or other Italian supercars, having that pitch emanate from the back of a Corvette is something that will be hard to get used to. We’re not saying the sound is bad—it’s actually pretty badass—but it’s not even close to the sound signature we’ve come to associate with Corvettes.
The real culprit here isn’t the new 5.5L DOHC V-8 that Chevrolet moved to. Instead, it was the choice to go with a high-revving flat-plane crank. This drastically changed the firing order of the engine and eliminated the classic American V-8 sound that’s typical with the firing sequence of a traditional cross-plane crank. But we know what you’re thinking: “Well, this is just the race car, so I’m going to be able to get my V-8 rumble fix from the production car!” Well, yeah, for now. You see, for Chevrolet Racing to run this new DOHC flat-plane crank mill in the C8.R, it has to, according to the rules, run a similar engine in at least 300 production cars. So does this mean that an eventual C8 Z06 variant will lose its iconic exhaust note?
Forget Mustang vs. Camaro. Ford’s Shelby GT500 is ready to challenge Chevrolet’s flagship C8
Mustang vs. Corvette? Go ahead, pinch your thumb and index finger to the bridge of your nose, squint your eyes, and blink hard. When you look again, the words on the page won’t have changed.
Rarely has MotorTrend conducted (or concocted) such a bold comparison. But it’s a mad, mad new world we’re in now. Forget the Blue Oval’s sacrosanct rivalry with Camaro, which had always left the Corvette to chase the elusive, pricier Porsche 911.
Oh sure, the base pony car models will still compete, same as always. But the top-end Mustang GT500 is so excellent it deserves higher-octane competition. The final piece of evidence: The Mustang Shelby GT500 costs more than Chevrolet’s new mid-engine Corvette supercar when similarly equipped. Game on.
The C8 Corvette and Shelby GT500 have stirred up more buzz than anything else that’s come from the Motor City in recent memory. After decades of teases and concepts, the ‘Vette finally slides the engine back in the chassis to join the transaxle aft of the driver’s derriere. And after the extremely successful Shelby GT350, which finished a sharply creased second place in our 2019’s Best Driver’s Car, Ford brought in even heavier artillery with a load more horsepower and torque.
These two contenders offer different kinds of appeal, both inspiring great desire in the high-performance enthusiast world. Both offer capabilities that measure well against far pricier foreigners, without the kind of sacrifices that used to come with the label “Made in America.” Gone (mostly) are the long-muttered utterances about cheap features and fixtures, crude handling, and lack of refinement.
Of course, when you look inside these two cars, there’s an immediate difference. The Corvette is an American interpretation of a mid-six-figure European supercar; the Shelby has nearly the same interior as that rental Mustang convertible at the Hertz counter at LAX—albeit with better seats and some minor brightwork tacked on to disguise its cheesy rotary shift knob and plasticky switchgear. Ford’s interior guys still have some work to do before they can declare their Shelby variants to be world-class premium.
But this is not a comparison test for value shoppers who peruse our Buyer’s Guide, niggling over inches of legroom and warranty coverage.
This is a track test—the literal interpretation of where the rubber meets the road.
The C8 Corvette has come of age—finally, I might add—with a style and behavior that bring to mind a word like “sophistication.” The Corvette’s new shape will sit well with the German and Italian exotica in the valet lot at the country club.
The Shelby GT500 comes from another, more purely American place, the pony car. But since the arrival of the S550 chassis in 2015, the muscular Mustang and its more powerful derivatives have risen above the hot rods of yore, to compare well with European icons.
The ‘Vette excels with exotic appearance, precise and agile handling, and balanced power with a nice rush of strong, smooth, jetlike urge. The Muscle-tang crushes like a bodybuilder with brains. Its huge forward forces do not overwhelm its chassis, as in many of the beloved classics we’ve known before.
The C8 Stingray carries a lithe, striking new shape that will grab attention from a block away. Its lines do a terrific job of conveying more of a sense of value and beauty, yet it’s still imbued with a half-century-plus of genetic identifiers. I predict this car will generate more than a few “Oh, wow!” reactions from the public long after it has gone on sale.
The Mustang is a beefed-up beast with bulging biceps, based on our well-known sporty coupe. It will light up the pony car crowd, certainly. But among the elites, the Shelby’s familiar muscle-bound shape may still result in upturned noses, window-rattling V-8 rumble or not. Where the Mustang scores more points in this contest is in its competence in motion.
At speed, the ‘Vette’s strongest dynamic assets are described in a list of two: first, low polar moment, and second, forward traction. Chevy engineers have created a machine that benefits in exactly the ways it should: more centralized mass and the resulting rearward weight bias.
The Corvette has long been the bad boy of the racetrack, the Bart Simpson of supercars: rude, loud, cheap, unpredictable, and hard to handle, but fast and fun in its own brash way. Now, the Corvette has finally grown up. The C8 Corvette is more sophisticated, capable, and mature.
When the majority of the weight in a chassis is nearer the center of gravity, the car will change direction more eagerly. Formerly carried way up front under those arching fenders, the big engine actually resisted the steering tires as they tried to pull that hunk of metal around to face the apex of a turn. The amidships engine makes the steering feel responsive, more direct, and more precise. It’s less work. The new ‘Vette slices its way into a bend in a most delightful way.
Too much, sometimes—and this is the tricky part of the setup. Quick response can overwork the rear tires and create oversteer. In several high-speed tests, and again here at Virginia International Raceway, we have found some of that in the C8’s track personality. It really will point to the apex entering a corner and sometimes overdo it and end up sideways, with the widely adjustable stability control switch fully off (thank you for providing us with that choice, Chevy).
But when you apply your American V-8 torque, then you find the greatest improvement in driving the American Sports Car: It puts ponies to pavement. The C8 hooks up. Chevy has taken advantage of placing the engine over the rear wheels, and that loading successfully creates forward thrust far better than any Corvette before. The new ‘Vette launches hard from a slow corner or a stoplight/dragstrip. Check out that 0-60 time, beating cars with far higher power ratings and even some with all-wheel drive. That, my friends, is traction.
In fact, the ‘Vette transfers weight rearward so well that it sometimes goes into another kind of slide: understeer. The front loses grip a bit prematurely as a result of the light front loads. What to do? Is it bad? No, but this is a brand-new baby, and there’s still something to be learned. We believe we will see the C8 Corvette improve further as the Chevy team learns more about this all-new mid-engine phenomenon.
In street-tuned mode dashing around VIR, the ‘Vette revealed deliciously instant steering response. It was quick and stable as I carved into a corner, and it revealed snappy trailing-throttle oversteer when I released the brake. Both are clearly influences of the mid-engine low polar moment.
As I accelerated off slow corners, like VIR’s Oak Tree, the C8’s ground-gripping traction rockets the car forward, and it remains well balanced even though it feels like it might wheelie. I found a consistent gradual side slip in third and fourth gears exiting faster sweepers. The C8 has more power oversteer at 80 mph than it does at 40, which is unusual.
The new Corvette’s braking was strong and stable with moderate nose dive. There was some isolation, if not the degree of e-pedal numbness I feared, and the brakes were cooled with some really nice Z51 brake ducts. Last, there was no more float, better suspension damping, but not harsh.
Crawling under the hood, we then adjusted the C8’s suspension to its track settings—which simply comes down to much more negative camber, front and rear. When added to the 8 degrees of caster (the same in Street or Track mode), the Corvette creates camber gain when the wheels are turned, which is especially good for tight turns, and a strong self-centering force for stability and good on-center feel.
High caster will also cross-weight a chassis because the outside wheel swings in an arc upward as the inside wheel swings down. These will both typically work to reduce the understeer that we squawked about in earlier tests.
The effect of the added camber was much improved grip everywhere, reducing but not eliminating traits of midcorner understeer and drop-throttle oversteer and raising speeds with better manners. The basic traits of midcorner understeer and trailing-throttle oversteer were still there, just not as much.
In Track setup, the Corvette’s lap times improved by 2 to 3 seconds with less falloff and better grip on a long run. Tying this all together was an eight-speed dual-clutch transmission that worked quite well at full chat, completing the performance of a much improved product. Far more than deserving of the title, this fresh offering is a 21st century new chapter, with more room to improve. One step back with the engine is a giant leap forward for the Stingray.
The GT500, on the other hand, has sprung from the loins of another highly regarded thoroughbred, the GT350. As such it comes from a known source that has been developed for years. It shows on track, especially.
Whereas the C8 is precise, the GT500 hoons. Toss it around. Grab it by the scruff of the neck. This pony encourages aggression. Its version of refinement manifests in confidence for the driver. And the GT500 works in both standard and Carbon Fiber Track Pack form. It is beautifully balanced on track. The steering stays alive all the way through a corner. Quick turn-ins show no evil twitches. Pouring on the ponies rockets it down the straights, and slides come slow and controllably. Within reason.
There’s that word again: reason. Use it when you squeeze down the Shelby’s accelerator. The supercharged cross-plane Coyote-based V-8 clearly makes all of its advertised 760 horsepower. This is another step into the Brave New World of high technology, and overeagerness with that gas pedal will be rewarded with jail and/or hospital time.
Every one of those ponies made themselves known as the Mustang devoured the long back straight at VIR, touching nearly 170 mph, lap after lap. No power fade here, unlike some other American blown V-8s making similar numbers.
The Coyote belts out a stirring bellow or calms to quiet as a mouse with just a switch of the electronic valves in the dual exhaust, allowing you to decide whether to wake the neighbors.
All that thrust goes through a new Tremec dual-clutch seven-speed that exhibited fine behavior on the street and flat out. Manual shifting during a hot lap is just a distraction, and the GT500’s auto mode rivals Porsche’s PDK (yes, really) and does everything I would do, anyway. It even had the savvy to hold a higher gear in places rather than constantly throw out raucous downshifts.
On straights, there’s a rewarding “over-torque” feature that gives a little extra shove on each shift, like a manual power shift. Yet in corners, I felt the Tremec smooth those out. Impressive. The track program is really dialed in. The Ford team should be proud.
This thrust twists a trick carbon-fiber driveshaft into a Torsen gear-type limited-slip differential—a good choice for a front-engine chassis because it doesn’t lock up much off power. This helps get the GT500 pointed into the turn, and it’s also a non-wear item, unlike the clutch-type diffs.
If the driver remains very responsible with the right pedal, the Shelby is responsive and stable. The MagneRide shock system soaked up the curbs and bumps, but it floated a bit under the loads of pro speeds. Happily, though, when the PS4S tires did break loose, it was mostly a gradual, even enjoyable experience. The GT500 has that magic combination of steering response at the limit: the ability to tighten its line while loaded laterally in the middle of a corner, without losing grip at the back.
The Shelby handles this great grunt very well—even with its traction/stability control fully disengaged. (I don’t recommend this unless you’ve completed several professional driving schools, one of which Ford offers with the purchase of a GT500, or have won Daytona at least once.) It’s an incredible thrill, breathtaking, to lay the pedal to the metal. But it requires skill to handle that thrill.
Stopping this rig were perhaps the largest rotors (16.5 inches) and Brembo calipers I’ve yet to experience. Although the big Shelby could dive deep, deep into the tight corners VIR presents at the culmination of its long straights, it was here I could find my only real complaint: a bit of a long brake pedal, which was a little disconcerting at 170 mph. No fade but some squish. They even bled the brakes for me, yet both test Shelbys felt spongy. This was surprising because I recall complaining that the GT350’s brakes were too strong, requiring only a big toe. Perfect would be somewhere in between
The incredible performance capability of the new Shelby (especially with the Carbon Fiber Track package) moves the Mustang into the supercar realm, it pleases me to claim. Both Shelby models provide such thrills that they represent good value even at these prices—driving with confidence-inspiring and consistent speed that is rare to find at any price.
So, to the numbers: Lap times for the C8 Z51 and the standard GT500 were quite comparable, though achieved in different ways. The Shelby evaporates the straights; the C8 carves the corners.
The Shelby carries the load of your family, so in spite of its fantastic, predictable balance, the Corvette can leave it in the twisties, driven precisely.
Once we tried the GT500 equipped with the Carbon Fiber Track package, however, it was all over for the street ‘Vette. The CFTP Shelby is magic on the racetrack, wearing R-compound Sport Cup 2s, carbon wheels, lower and firmer springs/bars/shocks, a proper wing and hell-yes-they-work aero fitments, and much more. Fire it up, and the Shelby is long gone in a blaze of glory.
So here’s the greatest difference between these fantastical motorcars. Shelby: raging, proficient power. C8 Corvette: precision, potential, and style. The price, similar. The choice, yours. The pleasure, ecstatic.
Source; Randy Pobst: MotorTrend