Carbon Fiber Extreme

Posts tagged “mary barra

Mid-Engined Chevy Corvette Video Analyses The 2LT Interior

The Goldilocks zone of Corvette C8 interiors?

By now, you should know that Chevrolet has started deliveries of the mid-engine 2020 Corvette. Lucky owners of the ‘Vette C8 are starting to receive their newest toy and most likely you’ve already seen one on the streets – that’s if the state you’re in is not affected by the coronavirus lockdown.

If you’re among those who are planning to purchase the new Corvette but are undecided with the trim level to choose, this video might be able to help you – especially if you’re particular with a car’s interior.

The Corvette C8 comes with three trim levels: 1LT, 2LT, and 3LT. The differences lie mainly in the features offered on each trim level, which defines that the cabin will look and feel like. That’s pretty important, considering that we spend so much time inside the car rather than staring at our investment from a distance. So, here’s a little guide.

The base 1LT trim isn’t really basic. With the entry-level trim, you already get the GT1 seats wrapped in mulan leather, a customizable 12-inch gauge cluster, push-button ignition and keyless entry, and an 8-inch Chevy MyLink infotainment system with Apple CarPlay and Android Auto, 4G LTE Wi-Fi, and 10-speaker Bose sound system. The Corvette 1LT trim is available in three color options: black, gray, or red.

Going up the 2LT trim gives you more interior color options plus features like a rearview camera mirror, a colored head-up display, heated/cooled seats, heated steering wheel, advanced blind-spot monitor, and rear cross-traffic warning. The infotainment gets upgraded as well with a wireless charger and a 14-speaker Boss audio system.

Finally, the 3LT trim dials up the ante by adding a premium Nappa leather with suede microfiber accents – all in combination with the GT2 seats that have more bolsters. These seem not a lot but the range-topping trim adds luxury to the sports coupe.

If you’re still undecided, watch the 2LT interior review on top of this page to check whether you need to take it down a notch to 1LT or go all out on the top-level 3LT.

Source: HorsePower Obsessed


Hennessey’s twin-turbo C8 Chevy Corvette V-8 makes 643 horsepower early in development

2020 Chevrolet Corvette Stingray undergoes twin-turbo conversion at Hennessey
2020 Chevrolet Corvette Stingray undergoes twin-turbo conversion at Hennessey
2020 Chevrolet Corvette Stingray undergoes twin-turbo conversion at Hennessey
2020 Chevrolet Corvette Stingray undergoes twin-turbo conversion at Hennessey
2020 Chevrolet Corvette Stingray undergoes twin-turbo conversion at Hennessey

It took 30 hours for Hennessey Performance Engineering to tear apart a new 2020 Chevrolet Corvette, install twin-turbo setup, and put it back together.

It’s no surprise, then, that the twin-turbo C8 Corvette isn’t ready to be sold to customers. The engine lacks intercoolers and Hennessey hasn’t cracked the code of GM’s new electrical architecture to reprogram the ECU.

“This is just the beginning, our own car, doing R&D,” company founder and CEO John Hennessey told Motor Authority.

On Monday, the engine made 643 horsepower and 570 pound-feet of torque at the wheels on a Dynojet dyno while running just 5 psi of boost. That compares to baseline testing HPE performed on the stock car which revealed 466 hp and 451 lb-ft of torque. HPE plans to offer a 1,200-hp version of the C8, which Hennessey said could make 18-20 psi of boost.

Hennessey took delivery of an orange C8 Corvette in Detroit on March 13. He and his daughter, Emma, drove back to the performance outfitter’s Texas headquarters and performed baseline testing before the Hennessey team tore apart the car.

The orange C8 fired back to life on Friday with twin 62-mm Precision Turbos and twin blow-off valves connected to the throttle body mounted behind the catalytic converters. Both turbos are oil-cooled with twin scavenge pumps that feed back into the motor.

The system is not intercooled. Instead, there’s a methanol injection setup to keep things from getting too hot. HPE is considering where to put intercoolers. The current packaging has limited space for intercoolers without cutting into trunk space, which Hennessey does not want to do. 2020 Chevrolet Corvette Stingray undergoes twin-turbo conversion at Hennessey

Hennessey told Motor Authority his team currently can’t tune the factory ECU, but it is looking at aftermarket solutions for the engine management system. He noted it took a year for solutions to come to market for the C7 and added, “hopefully, it won’t take a year.”

Hennessey said when the turbocharged C8 was first started it didn’t throw any codes, errors, or a check engine light. “The computer seems happy with the turbos,” Hennessey noted. A check engine light did appear when the front wheel speed sensors were disconnected to put the car on the dyno, Hennessey said.

The orange C8 will used for R&D of upcoming modifications. Hennessey said he doesn’t expect to deliver modified customer C8s for at least six months, and all will have intercoolers and full plumbing.

Joel Feder for Motor Authority


C8 Corvette Secrets: The 2020 Corvette Has a Flying Car Mode

C8 Corvette Secrets: The 2020 Corvette Has a Flying Car Mode


As we continue to digest all the new information that came out of last week’s First Drive Event with the 2020 Corvette Stingrays in Las Vegas, there is a new “Mode” to discuss that most Corvette enthusiasts have never heard of.

The 2020 Corvette Stingray has several “modes” that help drivers get the most out of their cars. We are already familiar with the regular driving modes that feature settings for Weather, Touring, Sport and Track, as well as the two customizable modes called MyMode and Z-Mode. But what you may not be aware of is that the 2020 Corvette Stingray’s equipped with Magnetic Ride Control also features a “Flying Car” mode.

Well, it is the 21st century after all!

Corvette’s Vehicle Performance Manager Alex MacDonald is responsible for the chassis tuning of the new Corvette and he was tasked with explaining much of the on-track performance capabilities of the new Corvette to those at Spring Mountain last week.

For the C8 Corvette, engineers have rolled out version 4.0 of Magnetic Ride Control with the biggest change to the system is the use of accelerometers rather than position sensors that measured wheel height. Here is the slide that was offered on the new Mag Ride for the C8 Corvette:

C8 Corvette Secrets: The 2020 Corvette Has a Flying Car Mode


The Magnetic Ride Control is tied into the Corvette’s Performance Traction Management system and that’s where the Flying Car Mode comes into play.

When your crest an incline and the Corvette’s wheels are off the ground, they will spin faster like they are on ice or another slippery surface because there is no resistance. The performance traction control senses that and sends commands to slow the wheels. But that’s not the best reaction when on the track. The system now senses when the car’s front wheels leave the ground (and assumes that the rears will be leaving as well), and the system tells the performance traction control to ignore it because it knows that it’s temporary and that all four wheels will be back on the ground momentarily.

Here is Alex talking about the Flying Car Mode:


“The other interesting note about MR is that it communicates with the performance traction system and it tells that performance traction system that if the front wheels have just gone over a big crest that we know that one wheel-base later the rear is about to go over that same crest, we can adapt the traction control to work in that situation and we call that Flying Car Mode, which is a cool name for it, because it does detect when the car is airborne and we can alter the chassis controls to deal what happens when the car lands.”


Source:
Video by Keith Cornett


Tech We Would Like to See on the C8 Corvette: Active Aero

Tech We Would Like to See on the C8 Corvette: Active Aero


With the highest performance versions of the seventh generation Corvette, customers were forced to make a choice. Did they want their car to have the highest possible top speed, or did they want to sacrifice some of that by bolting a slew of aerodynamic aids to their car for maximum cornering ability?

We would love for Chevrolet to take that decision out of the ordering equation for buyers of the upcoming Z models and the Grand Sport. They could give buyers the best of both worlds with the incorporation of Active Aerodynamics.

Active Aerodynamics can take many forms, from grille vents that close at high speeds to streamline a car, to suspension that lowers at speed to reduce lift. We know that the Corvette team would build a fully functional system that integrates several of these technologies into a cohesive package, just like they did on the C7 ZR1’s chassis-mounted wing and innovative balancing front underwing, but what we mostly want to focus on here is the most visible piece of such a system, the rear wing.

This unit would elevate both the performance and even the prestige of GM’s looming halo car. There are several benefits of an active rear wing that accompany their off-the-charts cool factor.

1. An active rear wing can be lowered, causing it, for all intents and purposes, to disappear, along with any drag that it was creating. Top-end General Motors Products have become so fast that the most track-worthy editions have suffered at the dragstrip because of massive fixed wings. The effects of the C7 Z06/Z07’s wickerbill spoiler have been well documented. Chevrolet officially listed the top speed of ZR1’s with the “big-wing” ZTK package as 10 MPH lower than their stock counterparts, and the Camaro ZL1 with the 1LE package has proven slower than the car it is based on, even in distances as short as a quarter-mile. Allowing these serious track performers to retract their wing, and the ZTK/Z07/1LE models become the best version of their respective model-line with no excuses or asterisks, which is what buyers that dole out more funds expect.

Causes of Aerodynamic Drag

Photo Credit: https://www.sciencelearn.org.nz


2. Just as these wings can retract to reduce drag and improve top speed, they can be “actively” placed in full “attack mode” for maximum downforce in the corners. This increases cornering speed, stability, and driver confidence which can lead to drastically lower lap times.

3. Upon hard braking, an active wing can also go vertical, transforming into an air brake. This assists the actual brakes, resulting in shorter stopping distances. It also keeps more weight in the rear of the car, again helping with stability and, especially in a rear-wheel drive car, improved corner exit speeds.

Car Magazine (UK)

Photo Credit: Car Magazine (UK)


All three of these traits brought to the table by an active wing radically assist the driver and make the car faster in all aspects. The coolest thing is that, with the right programming, the wing does all three automatically with seamless transitions, and, did we mention how awesome they also look?

There has been speculation about Active Aero coming to the Corvette for several years now. These rumors were fueled by GM’s own patent filings which showed a sketch of a C7 fitted with advanced aerodynamic trickery. We think the top dog mid-engine offerings are the perfect place for the General to finally deploy this technology that can already be found on the majority of the world’s supercars.

Corvette Blogger


Watch These Multiple C8 Corvettes Utilize Launch Control

For the last two days we’ve been in Corvette Heaven as we were invited by Chevrolet to come out to Las Vegas and test drive the 2020 Corvette Stingray. The test consisted of two parts that included a route through the Valley of Fire state park and then today we drove the new mid-engine sports cars at Spring Mountain Motor Resort & Country Club.

Today’s driving session culminated with the very talented instructors from the Ron Fellows Performance Driving School offering hot laps around the track. Each driver gave their passenger a demonstration of the capabilities of the new Corvette and those two fast laps started with engaging launch control as each car took to the track.

With 60% of the weight of the 2020 Corvette residing over the back wheels, the Launch Control demonstration shows just how quick these cars are able to put power to the pavement as those Michelin Pilot Sport 4S summer tires quickly hook up to send the car on the track.

We will be traveling from Las Vegas to home in Tampa on Wednesday, but keep checking back as we got a lot of great photos and videos from our 2020 Corvette drive on deck!


Source:
Video by Keith Cornett


Official C8 Corvette Driving School at Spring Mountain To Start Classes this April

The Corvette Owner’s School at the Ron Fellows Performance Driving School will officially kick off its new program for the mid-engine 2020 Corvette with the first classes to start in April. And once again, Chevrolet is offering huge savings on the enhanced two-day program for just $1,000.

This announcement comes from Spring Mountain Motor Resort and Country Club, home of the Ron Fellows Performance Driving School.

“We are thrilled to be able to continue our relationship with Chevrolet and Ron Fellows here at our world-class facility. There has been an incredible buzz around the 8th generation Corvette, and what better way to kick off 2020 and our twelfth year of the school, with the all-new mid-engine Corvette,” said John Morris, CEO and co-owner of Spring Mountain.

The new C8 Corvette program features a two-day curriculum designed to provide drivers of all experience levels the skills and techniques of performance driving. You will experience both classroom and on-track driving instruction in a manner that builds upon your skills and increases your confidence with each session. You will come away from the Spring Mountain experience more knowledgeable and confident in the incredible capabilities of the 2020 Corvette.

Located just 55 miles from downtown Las Vegas, the Ron Fellows Performance Driving School offers some of the most fun you can have in a Corvette. Tuition for the two-day class is only $1,000 and includes a one-night stay in one of Spring Mountain’s luxurious condominiums. Enjoy access to the clubhouse for meals and drinks with breakfast and lunch prepared by Spring Mountain’s onsite chef.

“Our entire team here at Spring Mountain are incredibly excited about the 8th generation Corvette and cannot wait to get the new Owners School program started. I know that everyone responsible for the day-to-day operations of our school are really looking forward to providing our outstanding service and a great overall experience showcasing the next-level engineering of the new mid-engine Corvette,” said Ron Fellows, charter member of Corvette Racing and co-founder of his school at Spring Mountain.

To book your C8 Corvette Owners School, Call 800 391-6891 or view online at www.CorvetteOwnersSchool.com

Check out this photo gallery from Spring Mountain featuring the 2020 Corvette Stingray Z51 Coupes on the track!

Official C8 Corvette Driving School at Spring Mountain To Start Classes this April

Source: Corvette Blogger


Rare drawings, documents reveal secret history of mid engine Corvette

From an acclaimed concept car John DeLorean reportedly dismissed because he wanted something “smaller and more European,” to the design that ended a feud between a pair of GM giants — but may have set the Corvette back decades — a trove of unique documents, sketches and models tells a secret history of the 60-year quest to build a mid engine Chevrolet Corvette.

The story begins in the late 1950s with legendary Corvette chief engineer Zora Arkus-Duntov and came to fruition when the first mid engine 2020 Corvette Stingray sold for $3 million at auction in January.

Titled “The Vision Realized: 60 Years of Mid engine Corvette Design” and created by GM Design Archive & Collections, the exhibit included 19 original sketches by designers including Larry Shinoda and Tom Peters, the massive 4-Rotor rotary engine from the 1973 Aerovette engineering, a wood wind-tunnel model, even letters from Arkus-Duntov’s personal files.

“The story of the mid engine Corvette is incredibly complicated, full of fits and starts,” said Christo Datini, manager of the GM Design Archive & Collections.  Cristo Datini at the General Motors Warren Technical Center in Warren, Michigan on Friday, January, 31, 2020

Cristo Datini at the General Motors Warren Technical Center in Warren, Michigan on Friday, January, 31, 2020 (Photo: Eric Seals, Detroit Free Press)

A mid engine Corvette was a dream shared by GM designers and engineers. The layout, in which the engine is behind the passenger compartment and immediately over the rear wheels, improves acceleration and handling. It’s been a mainstay at Ferrari for decades, and inspired repeated design and engineering projects at GM. None of them made it to production till now, largely because the Corvette’s original front-engine layout was so successful.

“Why would we change the Corvette?” GM chairman and CEO Richard Gerstenberg said to Arkus-Duntov before both men retired in the mid-1970s. “We sell every one we can make.”

‘Design without limit’

A generation of GM designers and engineers had already fought that attitude toward the sports car that debuted in 1953 model, and a couple more would before the midengine eighth-generation C8 Corvette Stingray debuted last year.

The exhibition included dozens of sketches, models, photos and documents.

“Our mission is to preserve the heritage of GM Design and educate our designers on GM’s prominence in the world of design,” Datini said. The archive also is working with the Detroit Institute of Arts on a massive exhibition dedicated to automotive design that opens this summer. 

The Corvette exhibition closed at the end of January, but elements of it are likely to be displayed at other events and locations, possibly including the National Corvette Museum in Bowling Green, Kentucky, which provided materials for the collection.Original magazines with drawings of what Corvettes could have looked like on display at the General Motors Warren Technical Center in Warren, Michigan on Friday, January, 31, 2020

Original magazines with drawings of what Corvettes could have looked like on display at the General Motors Warren Technical Center in Warren, Michigan on Friday, January, 31, 2020 (Photo: Eric Seals, Detroit Free Press)

Chevrolet Engineering Research Vehicle I, Also called SERV I and XP-708, was the beginning. A running model that debuted in 1960, the car had the looks of an Indy car and a chassis that tested what a midengine layout could do. It was “a design without limit” and an “admirable tool” to help Chevy figure out “what to put in Corvette,” said Duntov, himself a former driver in the 24 Hours of Le Mans sports car race.

CERV I was used as a test vehicle for years. Larry Shinoda, who would go on to be known as the father of the ’63 Corvette Stingray and the Mako Shark concept car, tweaked its design repeatedly as engineers tested it with seven different power trains.

GM eventually retired CERV I, selling it to the Briggs Cunningham Automotive Museum for $1. When the museum failed in the 1980s, GM bought it back for “somewhat more,” Datini said.A model of the 1968 Chevrolet mid-engine Corvette Roadster that is one of many items for General Motors workers to see at the Corvette design display at the General Motors Warren Technical Center in Warren, Michigan on Friday, January, 31, 2020

A model of the 1968 Chevrolet mid-engine Corvette Roadster that is one of many items for General Motors workers to see at the Corvette design display at the General Motors Warren Technical Center in Warren, Michigan on Friday, January, 31, 2020 (Photo: Eric Seals, Detroit Free Press)

Corvettes the world never saw

Shortly thereafter, Duntov heard rumors Ford was developing a Le Mans racer to challenge Ferrari and launched work on CERV II. GM decided not to race, Ford and Carroll Shelby built the GT40 that inspired “Ford vs. Ferrari,” and the CERV II was used as an engineering test bed at secret proving grounds and never seen by the public during its active lifetime. Built in 1964, CERV II had a 500-horsepower V8, 210-mph top speed and 2.8-second 0-60 mph time.

A picture of the CERV II Corvette. The sports car never went into production but it was influential in the design of the C5 production Corvette. (Photo: Eric Seals, Detroit Free Press)

“By that time, engineers and designers knew a midengine chassis was necessary” to get maximum performance from the ‘Vette, Datini said. Putting the engine behind the passenger compartment puts the car’s weight over the rear wheels to put down more power without spinning. Shifting balance from the production ‘Vette’s nose-heavy weight distribution would also improve handling.

Also in 1964, the XP-819 experimental car was being tested. Designed by Shinoda, it bore a strong resemblance to 1970 Corvettes, but Duntov hated it, calling it an “ugly duckling” at least in part because he wished his engineering team got some of the budget allotted to designing the car. It had a 327 cubic-inch V8 and pop-up headlights.

Like many concept and engineering vehicles, XP-819 was destroyed, chopped up. Years later, the pieces were found in NASCAR designer and mechanic Smokey Yunick’s garage.

Half Corvette, half Porsche

With a name GM would later recycle on a minivan, the Astro II XP-880 was never publicly identified as a Corvette, but it was one, intended for production in 1970, but never got there. It debuted at the New York auto show, featuring a nose, front fenders and Firefrost Blue paint that that foreshadowed 1970s production cars.

DeLorean, then Chevrolet general manager, asked for a rush program to create a different midengine design to match the midengine Pantera Ford was developing with Italian sports car maker De Tomaso to debut at the 1970 New York auto show. The XP-882 had a tapering body with dramatic fender flares and a louvered rear window like the Mako Shark II concept car. Like so many midengine ‘Vettes before and after, GM brass decided to stick with the tried and true front-engine layout.

Also in the 1970s GM president Ed Cole — another legendary engineer who led the development of the small block V8 and catalytic converter, among other achievements — became enamored with the Wankel rotary engine. Duntov built two midengine experimental ‘Vettes with rotary engines, glad for Cole’s support despite not sharing his enthusiasm for the engine.Sketching and notes about the Corvette, one of the many originals on display for workers to see at the General Motors Warren Technical Center in Warren, Michigan on Friday, January, 31, 2020

Sketching and notes about the Corvette, one of the many originals on display for workers to see at the General Motors Warren Technical Center in Warren, Michigan on Friday, January, 31, 2020 (Photo: Eric Seals, Detroit Free Press)

The 1973 Corvette 2-Rotor XP-987GT was a smaller, European-scale sports car with a rotary engine. The body was all Corvette, but its chassis came from a Porsche 914. Italian design house Pininfarina built its body. GM displayed the 2-Rotor at auto shows in Frankfurt and Paris before the car disappeared, probably sold to a collector.

Bill Mitchell’s most beautiful car

At the same time, Duntov wanted to develop a bigger midengine Corvette. He and Cole hadn’t been on speaking terms since Duntov refused an annual bonus he thought was insultingly small. They made up, at least in part because Duntov wanted a budget to develop what would become the Corvette 4-Rotor Aerovette, an iconic, gull wing design. Duntov believed it was the most beautiful vehicle GM design chief Bill Mitchell oversaw in a career that included the ’57 Chevy Bel Air and ’66 Buick Riviera. 

Duntov recycled the XP-882’s chassis for the Aerovette, which featured silver leather interior trim.A picture of the Aerovette featuring bi-fold gulping doors in the sports car that was never made. It is one of many photographs, drawings and sketches on display on all things Corvette design inside the General Motors Warren Technical Center in Warren, Michigan on Friday, January, 31, 2020

A picture of the Aerovette featuring bi-fold gulping doors in the sports car that was never made. It is one of many photographs, drawings and sketches on display on all things Corvette design inside the General Motors Warren Technical Center in Warren, Michigan on Friday, January, 31, 2020 (Photo: Eric Seals, Detroit Free Press)

Despite the car’s striking appearance, Duntov would come to believe his agreement to use a rotary engine was a nail in the midengine ‘Vette’s coffin.

Despite that, another midengine engineering car arrived in 1974. The XP-895 began its life with a steel body. Intrigued by the idea of lightweight materials, DeLorean asked Reynolds Aluminum to create an aluminum body. That cut the car’s weight by nearly 40%, but DeLorean pulled the plug on the project because he wanted a smaller, more European design.

That never happened, and design work on midengine ‘Vettes came to a halt for more than a decade, as GM struggled meeting the challenge of higher fuel prices.

Closing the deal

By 1986, the quest for a midengine Corvette was ready to create another giant figure, and it got one when a young designer named Tom Peters began work on the Corvette Indy concept car. Peters went on to become the chief designer of the sixth- and seventh-generation C6 and C7 Corvettes and play a key role in starting work on the 2020 C8.

With a radically short hood compared to production ‘Vettes and cutting-edge technologies including four-wheel steering, traction control and active suspension, the Indy — so named because it used a 2.65L V8 Chevy developed for Indy Car racing —  kept dreams of the midengine ‘Vette alive

The 1990 CERV III — this time the C stood for “Corporate,” not Chevrolet Engineering Research Vehicle — was the next step. Datini’s research convinced him it was an attempt at a production version of the Indy.

CERV III had scissors doors and was built of Kevlar, carbon fiber and aluminum. With a 650-hp twin-turbo 5.7L  V8, GM predicted a top speed of 225 mph. It debuted at the 1990 North American International Auto Show in Detroit.

After that, work on the midengine Corvette went undercover for two decades. Photos of disguised prototypes at test tracks surfaced from time to time, but the car seemed to be as much myth as metal. There are whispers the Great Recession halted work on one, setting development back years.A display of Zora Arkus-Duntov known as "The Godfather of  the Corvette" at the General Motors Warren Technical Center in Warren, Michigan on Friday, January, 31, 2020.

A display of Zora Arkus-Duntov known as “The Godfather of the Corvette” at the General Motors Warren Technical Center in Warren, Michigan on Friday, January, 31, 2020. (Photo: Eric Seals, Detroit Free Press)

Development of the 2020 Corvette Stingray began around eight years ago, a long time for most projects, but the blink of an eye when it’s the last chapter of a 60-year story.

Mark Phelan for Detroit Free Press


A Le Mans Winner Ripped The C8 Corvette Around The Nürburgring In 7 Minutes 29.9 Seconds

When you’re Chevrolet and you have access to five-time Le Mans winner Oliver Gavin, it’s a smart idea to shove him behind the wheel of a new C8 Corvette with the Z51 performance package and point him out for a flying lap of the Nordschleife. These lap times are largely irrelevant as they absolutely do not correlate to driving enjoyment or real-world usable performance, but it’s a slightly abstract way to compare the relative abilities of sports cars.

With ideal conditions and an incredibly capable driver, Chevrolet managed a lap time of 7 minutes and 29.9 seconds. That’s quicker than a recent independent test Porsche 992 time, and Chevrolet’s own high-powered Camaro ZL1. That said, it’s 16 seconds off the pace of the C7-generation Corvette Z06. Interesting? Maybe. 

Chevrolet confirmed to RoadShow that this was the lap time, as hidden (below) in a teaser video for its upcoming documentary on the development of the C8.

Are you and I capable of this lap time? Hell no. But the car is capable of it in the right hands, and I guess that has bragging rights of some kind.

Obviously this is still just the base model Corvette with its 495 horsepower V8 mounted in the middle. The Z51 pack adds aero bits, better tires, better suspension, and better cooling for the entire car. There will be more powerful, better, and faster Corvettes coming, but for now you can rest assured knowing a C8 Corvette is slightly faster around the ‘ring than the big bad supercharged Camaro. That is, unless the ZL1 was of the 1LE variety (which ran a 7:16.04).

Bradley Brownell for Jalopnik


Mid-Engined Chevy Corvette C8 Production Has Started: Report

[UPDATE] Contacted by Motor1.com, GM spokesperson Chris Bonelli says production of the new Corvette will begin in February.

It’s a great day for those who have signed their names on the dotted line to buy a C8 as it appears production of the mid-engined Corvette has finally started. The eighth generation of Chevrolet’s popular sports car was originally scheduled to hit the assembly line towards the end of 2019, but the UAW strike took its toll and forced General Motors to push back production until February.

It looks like they’ve managed to get everything ready a few days sooner, with production at the Bowling Green, Kentucky factory now underway. The reveal comes to us from Chevy salesperson Mike Davenport through his YouTube channel called “Chevy Dude” where he regularly posts videos about everything interesting that’s going on related to the C8 and other models that have the bowtie emblem. He was the first to break the news about Chevy cutting back on dealer allocations for the Corvette’s 2020 model year, which was shortly confirmed to Motor1.com by a spokesperson.

It goes without saying Chevy Dude is talking about the production of customer cars, including his very own C8. Another tidbit revealed is about the cancellation of the optional exposed carbon fiber ground effects for the 2020MY due to supplier issues. If you have ordered the car already with this option, Chevy will have no other way but to delete it.

For those who haven’t pre-ordered the new Corvette and are interested in getting the 2020MY, it appears April is going to be the last month when dealers will be able to ask Chevy for cars. Interestingly, Chevy Dude also knows the production of the mid-engined sports car will transition to the 2021MY in September.

That effectively means the initial model year of the C8 will only be in production for about seven months. We also get to learn the first cars will hit dealers across the country around mid-February or closer to the end of the month.

As you might have heard already, the 2021MY is rumored to come with a price bump, but nothing is official at this point. All we have for the time being is a rumor originating from a “well-placed source” cited by Motor Trend who is saying the Corvette will lose the sub-$60,000 sticker. Chevy Dude doesn’t expect the price increase to be significant, based on his 20-year experience in selling cars and analyzing Corvette pricing changes from one model year to the next.

Motor1.com has reached out to Chevy for comment and will update the article if we get a response.

Source: Chevy Dude / YouTube


ROLEX 24 AT DAYTONA – AN IMPRESSIVE DEBUT FOR THE NEW CORVETTE C8.R

The 58th Rolex 24 at Daytona, the first round of the 2020 IMSA WeatherTech SportsCar Championship season, saw the first race for the new Corvette C8.R, the participation of an all-female driver line-up, 2019 NASCAR champion Kyle Busch’s first start in a 24-hour race and Ben Keating at the wheel of two different cars.

A NOTEWORTHY DEBUT FOR THE NEW CORVETTE C8.R

The #3 Corvette C8.R finished the first 24-hour race of its career in fourth place in GTLM (the equivalent of LMGTE Pro at the 24 Hours of Le Mans). Drivers Antonio García, Jordan Taylor and Nicky Catsburg encountered zero problems with the car and completed 785 laps (nearly 5,000 kilometers). Unfortunately, the same cannot be said of the #4 Corvette C8.R of Gavin-Milner-Fässler. As the car was in the top 5 in its class going into the ninth hour, an oil leak caused the car to return to its garage. The leak was found to be in an area that forced the mechanics to remove the engine for repair and the work took almost nine hours. The #4 was then able to hit the track again and finished the race in 36th place.

Much like the 24 Hours of Le Mans, the 24 Hours of Daytona is an extremely challenging race. To make it to the checkered flag with an all-new car is already a major accomplishment for Corvette Racing. The American team’s next stop is the 6 Hours of the Circuit of The Americas on Sunday 23 February in Austin, the fifth round of the 2019-2020 FIA World Endurance Championship season.

AN ALL-FEMALE DRIVER LINE-UP

All-female driver line-up Christina Nielsen, Katherine Legge, Tati Calderon and Rahel Frey shared GEAR Racing powered by GRT Grasser’s Lamborghini Huracan GT3 in the GTD class, but the car was forced to retire after a fire.

KYLE BUSCH ENJOYS HIS FIRST ENDURANCE RACE

2019 NASCAR champion Kyle Busch took the start in his first Rolex 24 at Daytona at the wheel of the AIM VASSER SULLIVAN team’s Lexus RC-F GT3. Along with teammates Parker Chase, Jack Hawksworth and Michael de Quesada, Busch finished 26th overall and ninth in the GTD class. The American driver pulled off a double and a triple stint without the slightest mistake and said after the race he really enjoyed the experience and hopes to return for the overall win.

BEN KEATING DOUBLES DOWN

Ben Keating participated in his 10th Rolex 24 at Daytona at the wheel of not one but two cars: the #52 ORECA 07 fielded by PR1 Mathiasen Motorsports in the LMP2 class and the #74 Mercedes AMG-GT3 fielded by Riley Motorsports in GTD. Both cars crossed the finish line, the #52 ORECA 07 in 10th place overall and second in its class two laps from the winners, and the #74 Mercedes AMG-GT3 in 29th place overall and 11th in its class. This was the fifth time Keating participated in the race with two different cars.

Source: 24H LE MANS


Radical New Corvette Renews Interest In American Cars In Japan

Having just captured the North American Car of the Year gong, the revolutionary all-new Chevrolet Corvette Stingray (C8), the first-ever Vette to get a mid-engined layout and right-hand drive, has just been unveiled in Japan for the first time. Given the fact that this reveal at the Tokyo Auto Salon was the first time that this radical new Vette has been shown anywhere in Asia, the reception was nothing short of rapturous.

At the world’s third largest customizing show, after SEMA and Germany’s Essen Motor Show, the Tokyo Auto Salon, staged inside the massive Makuhari Messe site became the location for GM Japan to unveil their biggest, most high profile launch in a decade.

Sitting on the stand in Zeus Bronze Metallic with a light tan-colored leather interior, GM Japan’s president Tadashi Wakamatsu explained to the thousands of gathered press and onlookers that the Japanese market would get a US-spec “2LT” and the high performance “3LT” and that deliveries would start in early 2021.Today In: Lifestyle

Asking several of the assembled media and Vette fans in the audience about their interest in the new coupe, this writer was not surprised to learn that all interviewees found the revolutionary new mid-engined layout, in comparison to the outgoing front-engined setup employed through seven generations of Corvette since the first 1953 model, especially appealing.

GM Japan president Tadashi Wakamatsu conducts press conference introducing the new Vette to Japan's media and car fans.
GM Japan president Tadashi Wakamatsu conducts press conference introducing the new Vette to Japan’s

All pundits also agreed that the recently launched and highly rated movie “Ford v Ferrari” had heightened their desire to see the all-new Vette.

“Sure the Vette is not a Ford, but its a reasonably-priced mid-engined American muscle car and that is more than worthy of attention,” said one Vette fan. In a country where American cars account for less than 2 percent of the market, it is rare to hear car buyers speaking in such glowing terms of American cars.

Several other audience members said that they found the all-new mid-engined layout and right-hand-drive feature “extremely appealing.” Even though the starting price in Japan will hover around $100,000, in contrast to the surprisingly low $60,000 entry level sticker price in the U.S., dozens of Japanese onlookers expressed great interest in an American-made supercar that undercuts many of its European rivals like Lamborghini, McLaren and many Ferraris by less than half. 

Even at that $100,000 entry level price in Japan, one sports car fan said, “I think Chevrolet have pretty much pulled a rabbit out of a hat here. Apart from the near 500 hp V8, which has switched from front-engined to mid-engined, it gets lightweight hi-tech aluminum construction, its composite and it has carbon fiber in it. And I love that sleek supercar silhouette.”

That is all true. But one of the main ways that parent company GM was able to keep the new Corvette’s starting price under $60,000 back home is to leverage the company’s economies of scale, with specific reference to the brand’s new Global B electrical platform. At last November’s L.A. Auto Show, I listened as Corvette chief engineer Tange Juechter explained how this new platform would provide the wiring, computers and structure for active safety systems, infotainment systems and even the groundwork for future electric cars.

GM Japan’s Wakamatsu couldn’t hide his joy as he unveiled the new Vette by saying, “We have a car here that gets inspiration from both an F35 jet fighter and and F1 race car. That great design, the all-new mid-engined V8 power, 0-60mph in 3 seconds and an appealing price tag is generating tremendous buzz in Japan.” And that will no doubt lead to unprecedented Vette sales in Japan. Time will tell.

Source: Peter Lyon for Forbes


Exclusive! C8.R Corvette 5.5L DOHC V-8 Pics and How the Flat-Plane Crank Alters Its Iconic Sound

000-2020-C8R-Corvette-5
002 2020 Rolex 24 hours Daytona C8R Corvette Engine Image Exhaust Sound
003-2020-Rolex-24-hours-Daytona-C8R-Corvette-Engine-Image-Exhaust-Sound

There’s A New Engine In The C8.R Corvette, And It Sounds Nothing Like Its Predecessor.

They say beauty is in the eye of the beholder, and although that’s true, it can also be in the ear of the listener.

Since the Corvette first hit the streets back in the 1950s, it was imbued with the beautiful and nearly magical sound of V-8 performance. It was a deep, bass-filled rumble that just oozed a feeling of power. Over the years, the sound emanating from Corvettes, both on the street and at the track, had a distinctive note that became synonymous with the car. When the Corvette moved to the LS1 in 1997, the firing order was tweaked a bit, and although the sound did change, it still had that deep rumble that we all love.

002 2020 Rolex 24 hours Daytona C8R Corvette Engine Image Exhaust Sound
Chevrolet is super secretive of its new mill for the C8.R, so much so that it covered up the back hatch to keep out prying eyes. About all the team will say is that it’s a 5.5L DOHC V-8 fitted with a flat-plane crank. Power numbers are limited to 500 hp and around 475ish lb-ft of twist, but that’s all it will say. In fact this picture is about as close as you’re going to get to seeing the new C8.R engine.

But the only thing constant in the world is change. For the C8.R, Chevrolet Racing really changed things up with its new mid-engine marvel, but it wasn’t the engine placement that ended the car’s iconic sound signature. It was the engine itself. Gone is the deep baritone exhaust note, replaced instead with a high-pitched Ferrari-like sound. Think puberty in reverse. And although we love the sound of a wound-out Ferrari or other Italian supercars, having that pitch emanate from the back of a Corvette is something that will be hard to get used to. We’re not saying the sound is bad—it’s actually pretty badass—but it’s not even close to the sound signature we’ve come to associate with Corvettes.

009-2020-Rolex-24-hours-Daytona-C8R-Corvette-Engine-Image-Exhaust-Sound

The real culprit here isn’t the new 5.5L DOHC V-8 that Chevrolet moved to. Instead, it was the choice to go with a high-revving flat-plane crank. This drastically changed the firing order of the engine and eliminated the classic American V-8 sound that’s typical with the firing sequence of a traditional cross-plane crank. But we know what you’re thinking: “Well, this is just the race car, so I’m going to be able to get my V-8 rumble fix from the production car!” Well, yeah, for now. You see, for Chevrolet Racing to run this new DOHC flat-plane crank mill in the C8.R, it has to, according to the rules, run a similar engine in at least 300 production cars. So does this mean that an eventual C8 Z06 variant will lose its iconic exhaust note?

003-2020-Rolex-24-hours-Daytona-C8R-Corvette-Engine-Image-Exhaust-Sound
Chevrolet Racing tried hard to give race fans a great-sounding engine. And although the new 5.5L engine in the C8.R does have a unique sound, it’s nothing like we’ve grown accustomed to.
000-2020-C8R-Corvette-5
002 2020 Rolex 24 hours Daytona C8R Corvette Engine Image Exhaust Sound
004-2020-Rolex-24-hours-Daytona-C8R-Corvette-Engine-Image-Exhaust-Sound
005-2020-Rolex-24-hours-Daytona-C8R-Corvette-Engine-Image-Exhaust-Sound
006-2020-Rolex-24-hours-Daytona-C8R-Corvette-Engine-Image-Exhaust-Sound
009-2020-Rolex-24-hours-Daytona-C8R-Corvette-Engine-Image-Exhaust-Sound
010-2020-Rolex-24-hours-Daytona-C8R-Corvette-Engine-Image-Exhaust-Sound
011-2020-Rolex-24-hours-Daytona-C8R-Corvette-Engine-Image-Exhaust-Sound
012-2020-Rolex-24-hours-Daytona-C8R-Corvette-Engine-Image-Exhaust-Sound
013-2020-Rolex-24-hours-Daytona-C8R-Corvette-Engine-bay-Image-spy-shot
014-2020-Rolex-24-hours-Daytona-C8R-Corvette-Engine-bay-Image-spy-shot
015-2020-Rolex-24-hours-Daytona-C8R-Corvette-Engine-bay-Image-spy-shot
016-2020-Rolex-24-hours-Daytona-C8R-Corvette-Engine-bay-Image-spy-shot
017-2020-Rolex-24-hours-Daytona-C8R-Corvette-Engine-bay-Image-spy-shot

‘Lost Corvettes’ to be given away: Photos of all 36 rare Chevrolet Corvette sports cars


52 PHOTOS2:11 p.m. EST Jan. 26, 2020This 1953 Corvette will be given away as one of the "Lost Corvettes" in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.This 1953 Corvette will be given away as one of the “Lost Corvettes” in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.CORVETTE HEROESThis 1953 Corvette will be given away as one of the "Lost Corvettes" in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.This 1953 Corvette will be given away as one of the “Lost Corvettes” in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.CORVETTE HEROES

This 1954 Corvette will be given away as one of the "Lost Corvettes" in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation. This 1954 Corvette will be given away as one of the “Lost Corvettes” in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.CORVETTE HEROESThis 1954 Corvette will be given away as one of the "Lost Corvettes" in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.This 1954 Corvette will be given away as one of the “Lost Corvettes” in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.CORVETTE HEROESThese 1954 (left) and 1955 Corvettes will be given away as one of the "Lost Corvettes" in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.These 1954 (left) and 1955 Corvettes will be given away as one of the “Lost Corvettes” in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.CORVETTE HEROESThis 1954 Corvette will be given away as one of the "Lost Corvettes" in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.This 1954 Corvette will be given away as one of the “Lost Corvettes” in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.CORVETTE HEROES

This 1955 Corvette will be given away as one of the "Lost Corvettes" in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.This 1955 Corvette will be given away as one of the “Lost Corvettes” in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.CORVETTE HEROESThis 1955 Corvette will be given away as one of the "Lost Corvettes" in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.This 1955 Corvette will be given away as one of the “Lost Corvettes” in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.CORVETTE HEROESThis 1956 Corvette will be given away as one of the "Lost Corvettes" in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.This 1956 Corvette will be given away as one of the “Lost Corvettes” in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.CORVETTE HEROESThis 1956 Corvette will be given away as one of the "Lost Corvettes" in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.This 1956 Corvette will be given away as one of the “Lost Corvettes” in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.CORVETTE HEROES

This 1957 Corvette will be given away as one of the "Lost Corvettes" in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.This 1957 Corvette will be given away as one of the “Lost Corvettes” in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.CORVETTE HEROESThis 1958 Corvette will be given away as one of the "Lost Corvettes" in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.This 1958 Corvette will be given away as one of the “Lost Corvettes” in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.CORVETTE HEROESThis 1959 Corvette will be given away as one of the "Lost Corvettes" in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.This 1959 Corvette will be given away as one of the “Lost Corvettes” in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.CORVETTE HEROESThis 1960 Corvette will be given away as one of the "Lost Corvettes" in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.This 1960 Corvette will be given away as one of the “Lost Corvettes” in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.CORVETTE HEROES

This 1960 Corvette will be given away as one of the "Lost Corvettes" in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.This 1960 Corvette will be given away as one of the “Lost Corvettes” in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.CORVETTE HEROESThis 1961 Corvette will be given away as one of the "Lost Corvettes" in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.This 1961 Corvette will be given away as one of the “Lost Corvettes” in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.CORVETTE HEROESThis 1962 Corvette will be given away as one of the "Lost Corvettes" in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.This 1962 Corvette will be given away as one of the “Lost Corvettes” in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.CORVETTE HEROESThis 1963 Corvette will be given away as one of the "Lost Corvettes" in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.This 1963 Corvette will be given away as one of the “Lost Corvettes” in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.CORVETTE HEROES

This 1964 Corvette will be given away as one of the "Lost Corvettes" in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.This 1964 Corvette will be given away as one of the “Lost Corvettes” in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.CORVETTE HEROESThis 1965 Corvette will be given away as one of the "Lost Corvettes" in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.This 1965 Corvette will be given away as one of the “Lost Corvettes” in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.CORVETTE HEROESThis 1965 Corvette will be given away as one of the "Lost Corvettes" in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.This 1965 Corvette will be given away as one of the “Lost Corvettes” in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.CORVETTE HEROESThis 1966 Corvette will be given away as one of the "Lost Corvettes" in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.This 1966 Corvette will be given away as one of the “Lost Corvettes” in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.CORVETTE HEROES

This 1967 Corvette will be given away as one of the "Lost Corvettes" in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.This 1967 Corvette will be given away as one of the “Lost Corvettes” in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.CORVETTE HEROESThis 1968 Corvette will be given away as one of the "Lost Corvettes" in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.This 1968 Corvette will be given away as one of the “Lost Corvettes” in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.CORVETTE HEROESThis 1968 Corvette will be given away as one of the "Lost Corvettes" in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.This 1968 Corvette will be given away as one of the “Lost Corvettes” in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.CORVETTE HEROESThis 1969 Corvette will be given away as one of the "Lost Corvettes" in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.This 1969 Corvette will be given away as one of the “Lost Corvettes” in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.CORVETTE HEROES

This 1970 Corvette will be given away as one of the "Lost Corvettes" in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.This 1970 Corvette will be given away as one of the “Lost Corvettes” in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.CORVETTEThis 1970 Corvette will be given away as one of the "Lost Corvettes" in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.This 1970 Corvette will be given away as one of the “Lost Corvettes” in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.CORVETTEThis 1971 Corvette will be given away as one of the "Lost Corvettes" in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.This 1971 Corvette will be given away as one of the “Lost Corvettes” in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.CORVETTEThis 1972 Corvette will be given away as one of the "Lost Corvettes" in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.This 1972 Corvette will be given away as one of the “Lost Corvettes” in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.CORVETTE

This 1973 Corvette will be given away as one of the "Lost Corvettes" in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.This 1973 Corvette will be given away as one of the “Lost Corvettes” in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.CORVETTEThis 1973 Corvette will be given away as one of the "Lost Corvettes" in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.This 1973 Corvette will be given away as one of the “Lost Corvettes” in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.CORVETTEThis 1974 Corvette will be given away as one of the "Lost Corvettes" in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.This 1974 Corvette will be given away as one of the “Lost Corvettes” in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.CORVETTEThis 1975 Corvette will be given away as one of the "Lost Corvettes" in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.This 1975 Corvette will be given away as one of the “Lost Corvettes” in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.CORVETTE

This 1975Corvette will be given away as one of the "Lost Corvettes" in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.This 1975 Corvette will be given away as one of the “Lost Corvettes” in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.CORVETTEThis 1976 Corvette will be given away as one of the "Lost Corvettes" in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.This 1976 Corvette will be given away as one of the “Lost Corvettes” in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.CORVETTEThis 1976 Corvette will be given away as one of the "Lost Corvettes" in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.This 1976 Corvette will be given away as one of the “Lost Corvettes” in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.CORVETTEThis 1977 Corvette will be given away as one of the "Lost Corvettes" in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.This 1977 Corvette will be given away as one of the “Lost Corvettes” in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.CORVETTE

This 1978 Corvette will be given away as one of the "Lost Corvettes" in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.This 1978 Corvette will be given away as one of the “Lost Corvettes” in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.CORVETTEThis 1979 Corvette will be given away as one of the "Lost Corvettes" in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation. 1979 Corvette will be given away as one of the “Lost Corvettes” in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.CORVETTEThis 1980 Corvette will be given away as one of the "Lost Corvettes" in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.This 1980 Corvette will be given away as one of the “Lost Corvettes” in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.CORVETTEThis 1981 Corvette will be given away as one of the "Lost Corvettes" in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.This 1981 Corvette will be given away as one of the “Lost Corvettes” in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.CORVETTE

This 1982 Corvette will be given away as one of the "Lost Corvettes" in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.This 1982 Corvette will be given away as one of the “Lost Corvettes” in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.CORVETTEThis 1984 Corvette will be given away as one of the "Lost Corvettes" in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.This 1984 Corvette will be given away as one of the “Lost Corvettes” in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.CORVETTEThis 1985 Corvette will be given away as one of the "Lost Corvettes" in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.This 1985 Corvette will be given away as one of the “Lost Corvettes” in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.CORVETTEThis 1985 Corvette will be given away as one of the "Lost Corvettes" in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.This 1985 Corvette will be given away as one of the “Lost Corvettes” in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.CORVETTE

This 1985 Corvette will be given away as one of the "Lost Corvettes" in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.This 1985 Corvette will be given away as one of the “Lost Corvettes” in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.CORVETTEThis 1986 Corvette will be given away as one of the "Lost Corvettes" in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.This 1986 Corvette will be given away as one of the “Lost Corvettes” in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.CORVETTEThis 1987 Corvette will be given away as one of the "Lost Corvettes" in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.This 1987 Corvette will be given away as one of the “Lost Corvettes” in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.CORVETTEThis 1988 Corvette will be given away as one of the "Lost Corvettes" in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.This 1988 Corvette will be given away as one of the “Lost Corvettes” in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.CORVETTE

This 1989 Corvette will be given away as one of the "Lost Corvettes" in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.This 1989 Corvette will be given away as one of the “Lost Corvettes” in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.CORVETTEThese Corvettes, known as the "Lost Corvettes," will be given away in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.These Corvettes, known as the “Lost Corvettes,” will be given away in a promotion by the Corvette Heroes to benefit the National Guard Educational Foundation.


New Corvette Had ‘Reason to Go Back Out’ After Long Delay

Corvette “had reason” to take its No. 4 car back out on track after lengthy repair…

The “tough lessons” of the No. 4 Chevrolet Corvette C8.R’s tumultuous Rolex 24 at Daytona debut gave Corvette Racing confidence going forward with its new car, according to team manager Ben Johnson.

The silver No. 4 Corvette spent eight hours in its garage during the IMSA WeatherTech SportsCar Championship season-opener after a cracked bell housing resulted in an oil leak.

Having pitted at around 11 p.m. the car eventually returned to the track close to 8 a.m. but it still managed to be classified as a finisher, albeit 327 laps behind the GTLM class winner.

While not divulging the extent of the oil leak and associated damage, Johnson explained why the team kept its car in the garage for so long.

“To fix the problem we had to move the engine back,” he told Sportscar365.

“We tried to do it with the engine installed to expedite it but then we realized that if we wanted to get it back on track, we had to take time to take the engine out and put it back in.

“We just took our time to make sure that there was nothing else. At that point, we were no longer in contention, but we had reason to go out and just understand where else the car may have issues.

“It was just kind of a test session after that.

“I think we will go back and disassemble the whole car. We have some issues to address with the oil leak.”

Oliver Gavin, who shared driving duties in the No. 4 with Tommy Milner and Marcel Fassler, said the Corvette crew “wanted to be methodical” about its repairs which added to the length of time it spent in the garage.

The Englishman suggested that the car was starting to show signs of promising pace that it could have taken through the night had the leak not occurred.

“It was really tough on the guys, eight hours of working from midnight until eight in the morning, it was crazy,” Gavin told Sportscar365.

“As soon as that happened, we knew that our day was done and that we wouldn’t be challenging. It was a shame because up to that point, our car had just started to come along.

“It wasn’t super strong right at the start, but we were gaining on it as we went through the race. Could we have been in the mix at the end? Who knows. But there was a lot that we’ve learned from this.

“As a team, we figured a lot of stuff out today. Testing is great but you really see exactly where you are when you come to a race and see where your competition is.

“We’ll take that away and process the data to see how we can make ourselves and the car better for Sebring.”

The No. 3 Corvette fared better than its sister car with Antonio Garcia, Jordan Taylor and Nicky Catsburg bringing home a fourth-place class finish on the lead lap.

Johnson said that this car’s run wasn’t entirely straightforward, but it held up well enough to remain in contention for a podium heading into the final two hours.

“We had a slight clutch issue at one point, but we had fixed it after the first stop that we witnessed it, so it wasn’t a time loss,” he explained.

“But nothing held up that car specifically again.  We were really happy that all the execution, pit stops, driver changes… all things that you don’t get to test in anger until you reach the race, all went super well.”

Johnson added that the Rolex 24 has given the Corvette team confidence ahead of its next race outing at the ‘Super Sebring’ endurance racing double-header weekend in March.

“Coming away from our first race with one car on the lead lap… the issue with the oil leak is obviously very apparent, but when we looked at it we realized it’s a pretty simple fix,” he said.

“I think it raises everyone’s confidence that we can get through some of these early tough lessons and move on to Sebring in a much better spot.”

Source: Daniel Llyod for Sportscar365


Ultimate Corvette Expected to Go PHEV

General Motors is plugging into EVs in a big way. And, among a wide range of electrified models set to come out over the next several years, one is expected to wear the Chevrolet Corvette badge.

GM CEO Mary Barra has repeatedly said the automaker is on a “path to an all-electric future.”

Several officials have acknowledge the C8 Corvette was designed to be electrified, though they have to confirm what form that will take.

A plug-based ‘Vette would focus on performance – likely nudging 700 hp or more — rather than mileage, though it likely also would be the most efficient version of the sports car.

When “spy shots” began circulating last week showing a plug hanging out of the nose of a new Corvette undergoing winter testing its was initially reported this was the rumored battery version of the sports car.

Parent General Motors subsequently explained that the pics had caught a conventional, gas-powered 2020 ‘Vette,” but the episode only underscores expectations Chevrolet is, indeed developing an electric Corvette — something an assortment of executives, including GM President Mark Reuss have taken pains not to deny.

If anything, Reuss effectively confirmed it is only a question of time, noting last July that the eighth-generation Corvette just coming to market will have to comply with the company’s “strategy of 0-0-0: zero emissions, zero crashes, zero congestion.”

But exactly what that means – or, more precisely, what form that would take – is far from certain.

GM officials have made it clear there will continue to be an assortment of different ‘Vette variants, perhaps more than we’ve seen in the past. During the July unveiling of the C8, several Corvette insiders told Ride that the new, mid-engine platform was specifically designed to allow the use of electric drive, with a battery pack placed below the load floor. What type of system it will be is the real question.

Only a few years ago, GM seemed focused on both conventional and plug-in hybrids, the original Chevy Volt being a good example of its PHEV strategy. But it has pulled the plug on Volt and is, for the most part, moving towards pure battery-electric vehicles. The current example is the Chevrolet Bolt EV, with an all-electric Cadillac SUV dues later this year. Among the nearly two dozen other BEVs under development: a battery pickup expected to revive the Hummer name.

For those who still think of battery drive as slow and boring, no need to worry, however. Making 100% of their torque the moment they start spinning, electric motors can deliver insane levels of torque given enough power. The “conventional” hybrid Acura NSX is one example. The plug-in Lincoln Aviator is the fastest and most powerful version of that SUV. And whether you’re talking Tesla Model S with Ludicrous Mode or the new Porsche Taycan Turbo 4S, pure BEVs can be blindingly fast.

If anything, says Sam Abuelsamid, principal auto analyst with Navigant Research, “no doubt about it,” a battery-based Corvette will be the quickest ever, “easily getting into the 700 horsepower range, with over 1,000 NM torque, and launching from 0 to 60 in under 2 seconds.”

A conventional hybrid, even one as exotic as the NSX, is unlikely, various sources indicate. The question, then, is whether Corvette goes all-electric or plug-in hybrid. Abuelsamid is one who believes it will be a BEV, though the evidence is still too vague to be certain. One high-level insider cautioned Ride last July it would be difficult to squeeze in enough batteries to deliver the range BEV buyers would expect. But pulling out the internal combustion engine and transmission could solve that.

Do expect the electric drivetrain to be all-wheel-drive, with motors front and back, every source has agreed upon, something critical in order to get all that power to the pavement.

Another unanswered question is what an electrified Corvette might be called. Some sources have hinted this will be the next-generation Z06, others that it might replace the old ZR1, the traditional pinnacle of the Corvette line-up. There has long been speculation Chevy might be working up a Corvette Zora, an homage to the sports car’s legendary first chief engineer, Zora Arkus-Duntov, and what better way to do that?

How soon? “A bit more than” 24 months was the best answer we could get from insider GM. That’s a bit further out than many expected, but the GM strike last autumn appeared to have pushed back development efforts.

WHY THIS MATTERS

The C8 is the first production Corvette to adopt a mid-engine layout, boosting performance to supercar levels at a fraction of the sale price global competitors demand. An electric ‘Vette, whether PHEV or BEV, would pose an even bigger challenge to exotic brands like Ferrari, Lamborghini and Aston Martin.

Source: Paul Eisenstein for Ride.Tech.


Garcia, Gavin uncertain of Corvette C8.R’s Daytona prospects

Corvette Racing’s veteran stars, Oliver Gavin and Antonio Garcia, are positive about the new mid-engined C8.R’s progress but are uncertain how it will perform relative to its GT Le Mans class opposition at this weekend’s Rolex 24 at Daytona.

Gavin’s full-time partner Tommy Milner set Corvette Racing’s fastest time in Roar Before the 24 qualifying  which decides garages and pit stalls, and he was encouragingly just 0.108sec off the top time in class, set by James Calado in the Risi Competizione Ferrari 488 GTE.

However, Gavin warned that the race will be several hours old before everyone gets an accurate picture of how the GTLM contenders match up.

“The C8.R is a brand new car and this is its first race outing,” said the 2016 Rolex 24 winner. “We won’t know where we are in respect to the competition, and they will be looking at us and figuring out where we’re strong and where we’re weak.

“You can pick up little bits and pieces during the Roar and even in the two or three practice sessions before the Rolex 24, but you never really get a great idea of where you’re at until you get five hours or so into the race.

“But it always comes down to the last two hours. It would be quite remarkable if we could come right out of the box and be super-fast, super-reliable and have a successful weekend the first time out.”

Two-time IMSA WeatherTech SportsCar Championship GT Le Mans title winner and 2015 Rolex 24 winner Garcia also sounded a note of caution.

“So far, the new Corvette has been quite decent in testing,” said the Spaniard who is entering his seventh season with the legendary team. “It is still very early stages for this car.

“Even though we think we are ready, there are things that can come up. We must do everything we can to make sure we are as prepared as possible. Then we can see what we really have.

“Our testing has been a consistent evolution between track days and simulator work. We’ve been able to develop a plan to develop the car even though we weren’t testing on the track. The correlation of data has been good. Everything that we have tested virtually is working in real life. That makes life a lot easier when you can use all your tools to improve.

“We continue to validate all the work we’ve done and what we find on the racetrack. We are on the right track.”

While Gavin and Milner continue to be partnered by Marcel Fassler for the endurance races, Garcia not only is working with a new enduro extra – Nicky Catsburg – he also has a new full-time partner.

Jordan Taylor, who in 2017 won the IMSA Prototype title with the team owned by his father Wayne Taylor, and has two Rolex 24 wins to his credit, has moved to the GTLM class with Corvette, replacing Jan Magnussen.

This continues a relationship with the Doug Fehan-run team that stretches back to 2012, the first of six years in which Taylor raced a Corvette in the Le Mans 24 Hours. Partnering Gavin and Milner, he won the GTE Pro class at Le Mans in 2015.

“I’m excited to go back into GT racing with Corvette in GTLM with all-manufacturer teams and all-professional drivers,” he said. “The class will get a lot of eyes on it with the first race for the C8.R.

“The race itself will be extremely difficult. I’ll have to get used to looking in my mirrors again! In testing, I was reminding myself to check the mirrors leaving certain corners so I could get in the habit of doing it for the race.

“So I’m looking forward to it. Overall wins are fantastic, but a win is a win; you still get a Rolex watch no matter what class you’re in! But for us in GTLM, the competition will be the same if not more difficult than in prototypes.”

Source: David Malsher-Lopez


2020 Corvette Convertible Order Banks Are Officially Open

Expect to see them on dealership lots by summer.

As the world prepares for the new Chevrolet Corvette to finally enter production, many people may not realize that it’s only part of the 2020 C8 story. Corvette Blogger reports that Chevrolet dealerships are now able to place orders for the 2020 Corvette Convertible. We’ve confirmed with a GM representative that order banks are indeed open.

The convertible debuted a few months after the official C8 launch, but in many ways it’s been overshadowed by another Corvette model that hasn’t been revealed just yet. The C8.R race car made a surprise appearance at the end of the convertible’s debut event in Florida, and while it’s not a production-ready machine, its high-revving, DOHC flat-plane-crank V8 is virtually guaranteed to appear in a future ‘Vette. The likely candidate is a new Z06, but we still aren’t sure when it will arrive. In the meantime, the irony of the C8.R stealing the show at the convertible’s own reveal isn’t lost on us.

We suspect Corvette buyers aren’t overlooking the convertible, however. Chevrolet has said that 2020 C8 preorders are all but filled, so the drop top could be the last chance for buyers to get in on the mid-engine Corvette’s first production year. Opting for the convertible is a $7,500 premium over the hardtop, and it’s available with all the same options and trim levels. That includes the Z51 performance package which bumps the 6.2-liter V8 to 495 horsepower, and since the Corvette was designed from the beginning to be a convertible, Chevrolet says there’s no loss in performance when going roofless.

According to Corvette Blogger, there are no restrictions on convertible orders save for the number of cars a dealer is allocated. Rumors says that convertible production will begin in April, which would have them on dealer lots just in time for summer.

Source: Corvette Blogger via CNET Roadshow


First Mid-Engine Chevy Corvette Sold for $3 Million at Auction

Barrett-Jackson sold the first C8 Corvette off the line for the Detroit Children’s Fund charity, and NASCAR team owner Rick Hendrick snapped it up.

  • The Barrett-Jackson auction company got $3 million for the very first 2020 Chevrolet Corvette off the line at its January auction in Scottsdale, Arizona, with all proceeds going to a Detroit educational charity.
  • The mid-engine C8 Corvette with VIN 001 gets the Z51 Performance package and the 495-hp 6.2-liter LT2 V-8, and the winning bidder was NASCAR team owner Rick Hendrick.
  • This same auction house sold the last C7 Corvette last spring and took in $2.7 million for a different charity.

UPDATE 1/19/20: NASCAR team owner Rick Hendrick was the winning bidder, paying $3 million for C8 Corvette no. 1 at a high-spirited charity auction event on Saturday featuring GM CEO Mary Barra on the stage. Although the car present at the auction was red, Barrett-Jackson said the actual first car will be “a black-on-black Corvette 3LT loaded with every available option, scheduled to be built during the first quarter of 2020.”

We’ve seen this before: automakers offering the first example of a highly anticipated new model up for auction to benefit a charity. This time, General Motors will auction off the first mid-engine Corvette off the line at Barrett-Jackson’s Scottsdale Auction in January. All proceeds will go to the Detroit Children’s Fund, which benefits underfunded Detroit public schools.

VIN 001 of the C8 Corvette Stingray is powered by a 495-hp 6.2-liter LT2 V-8 and is equipped with the Z51 performance package, which adds an electronically controlled limited-slip differential with a shorter final-drive ratio, Brembo brakes, a performance exhaust, heavy-duty cooling system, and Michelin Pilot Sport 4S summer tires.

GM CEO Mary Barra and winning bidder Rick Hendrick pose during the Barrett-Jackson Auction in Scottsdale on January 18.

There’s no doubt this example will go for well over the $59,995 starting price of the C8 Stingray. Only a few months ago, the final front-engine C7 Corvette sold for $2.7 million at the Barrett-Jackson Northeast Auction in June, and the first Ford Mustang Shelby GT500 off the line sold for an insane $1.1 million at the Barrett-Jackson Scottsdale auction in January, both also for charity.

Source: Car and Driver; Conner Hoffman


Big C8 news!

And we literally mean “big.”

With production of the all-new 2020 Chevrolet Corvette Stingray about to get underway next month, attention is now turning towards future variants. More specifically, the E-Ray, the first of two hybrids planned (the second likely named Zora), as well as the Z06, and, eventually, the ZR1. While we don’t have a precise timeframe as to when any of those will arrive, it goes without saying the Corvette engineering team led by Tadge Juechter is hard at work this very moment.

Details remain mostly vague, but GM Authority has learned something very cool about the C8 Z06. An inside source familiar with the project is claiming the C8 Z06 will sport a massive rear wing, even bigger than what’s found on the outgoing C7 Corvette ZR1. What’s more, it’ll produce higher levels of downforce and create less drag.

Although the C8.R race car has a big rear wing of its own, the Z06’s will differ in both appearance and functionality. Think more along the lines of the rear wing on the Koenigsegg Agera RS. Another unknown is whether or not the C8 Z06 will come with the rear wing as standard or if it will be optional. Some sources are claiming the Corvette team is leaning towards making it standard.

Assuming all goes to plan, the next Z06 could arrive in about two years’ time. Instead of the naturally aspirated 6.2-liter V8 with 490 horsepower and 465 lb-ft of torque, the C8 Z06 is expected to have a new NA 5.5-liter V8 with a flat-plane crank. Expect somewhere in the neighborhood of 600 hp.

Additional elements will include an improved suspension, brakes, and additional aerodynamic components aside from the rear wing. There shouldn’t be any mistaking the C8 Z06 for the C8 Stingray, even when the latter is equipped with the Z51 performance package. It should also go without saying the Z06 will command a significant price premium. A fully-loaded 2020 Corvette Stingray will surpass $100,000, so don’t expect the Z06 to cost any less.

Source; Jay Traugott; Carbuzz


Patience and understanding are more than necessary

If you’re waiting for an all new 2020 Chevy C8 Corvette, it’s only natural that you’re wondering when your allocation is going to come up. And, with production just now kicking off, it’s easy to wonder whether yours will be considered a 2020 or a 2021 model (and what pricing implications that will have on your bottom line.) I’m sure some of you have plenty of other questions too and now, thanks to Mike Furman – one of the most famous Corvette salesman in the world – we have some answers. Keep reading for a full update on the Chevy C8 Corvette and what’s going on behind the scenes.

CHEVY ISN’T PRODUCING C8’S SLATED FOR CUSTOMER DELIVERY YET

One of the most important things we’ve learned from Mr. Furman’s latest e-mail update is that Chevy’s Bowling Green Assembly Plant is exclusively producing C8 Corvettes, but none of them are going to make it into customer’s hands. According to Furman, all of the C8’s produced so far and those produced through the end of January, are all “captured test vehicles.” Now, no clarification beyond that was mentioned, but in most cases, these are the vehicles used to fine-tune the production process, make sure everything lines up the way it should, etc. Chevy could have other uses for these vehicles, but usually, they are destroyed or recycled once their purpose has passed.

IF YOUR ALLOCATION COMES AFTER THE 2021 MODEL YEAR SWITCH, YOU’LL PROBABLY PAY MORE

We all know that the initial 2020 models will be cheaper than subsequent model years, however, the difference in cost between the 2020 and 2021 models has yet to be revealed. In his latest E-mail, Mike Furman raised a very important point.

Pricing for 2021 models will probably go up, but historically GM has not raised the price by more than $2,500 year-to-year.

So, it won’t be outrageously more expensive if you receive a 2021 model over a 2020. And, as pointed out by Furman, the C8 Corvette landed at some $10,000 less than anyone expected anyway, so you’re getting one hell of a deal for a world-class sports car anyway.

C8 CORVETTE PRODUCTION FOR CUSTOMER CARS STARTS IN THE FIRST WEEK OF FEBRUARY

If you’re lucky enough to have one of the first customer car allocations (you’re probably not,) you could be riding around in your new Vette very soon.

The production of customer-bound cars starts in the first week of February and GM will begin delivery sometime after that.

And, if you were considering skipping the museum delivery because of not having paint film protection for the ride hone, you can now get XPEL applied at NCM Motorsports Park before you head our on your maiden voyage.

CHEVY IS LIMITED ENGINE TORQUE FOR 500 MILES BECAUSE YOU CAN’T FOLLOW INSTRUCTIONS

When news about Chevy reducing torque in the C8 Corvette during the break-in period hit the net, some people lost their minds. Well, there’s a damn good reason that Chevy has to do it, and it boils down to the fact that people just don’t honor the break-in period as they should. As quoted on Mid-Engine Corvette Forum it has to do with ensuring that the break-in period is honored and, while torque will be reduced by 25-30 percent for around 500 miles, it doesn’t really affect performance that much:

“For the 8th generation Corvette, we have taken it a step farther. With more weight on the rear, the car has more traction and we take advantage of that with more aggressive gearing. That translates into more torque multiplication and more loads in the driveline. We decided for the first 500 miles to limit maximum torque in first and second gears. The torque reduction is roughly 25 to 30% depending on which transaxle (standard or Z51) and which gear. That may sound like a big reduction, but in reality the car is still really fast.”

The basic principle is that this is done to make sure the engine’s components wear properly during break-in and, ultimately, helps ensure the longevity of the engine. Apparently, Chevy is still going to ask customers to take it easy on the car during the break-in period too, so do yourself a favor and don’t get into it until you pass the golden 500-mile mark.

JAY LENO WAS THE FIRST NON-GM-EMPLOYEE TO DRIVE THE 2020 CHEVY C8 CROVETTE CONVERTIBLE Z51

ENJOY THE CHEVY C8 CORVETTE EXHAUST COMPILATION FROM DRIVE615

Source Robert Moore;Top Speed


Corvette Poised for Sebring WEC Return

#3 Corvette Racing Corvette C8.R, GTLM: Antonio Garcia, Jordan Taylor, Nicky Catsburg

Corvette Racing set for COTA-Sebring double FIA WEC run with C8.R

Corvette Racing looks set to contest the 1000 Miles of Sebring, in what would be the second consecutive FIA World Endurance Championship outing for the new Chevrolet Corvette C8.R.

Sportscar365 has learned that provisional plans are in place to run the Sebring WEC race alongside its two-car factory GT Le Mans class program in the Mobil 1 Twelve Hours of Sebring the following day.

It would come as one of the prerequisites from the ACO, which has stipulated that the Pratt & Miller-run team must run in at least two regular-season WEC races in order to be guaranteed a pair of GTE-Pro entries for the 24 Hours of Le Mans.

The team ran the Shanghai WEC race in 2018 in addition to Sebring last year with its previous-gen Corvette C7.R.

While declining to comment or confirm on any WEC plans beyond its COTA entry, Corvette Racing program manager Doug Fehan said that it’s been their intention to run two regular-season races in the 2019-20 WEC season.

“Right now, that’s the plan but we’re running down a road,” Fehan told Sportscar365.

“We haven’t refined what exactly that plan is going to be. I couldn’t give you every detail and widget.

“We’ve been busy for a couple of years trying to race and design, build and develop the new car. This adds to the challenge of all of that.

“I think most people would understand that we don’t have it completely defined yet.

“It’s a case of dealing it in an orderly fashion.

“We can’t become overwhelmed too much with what’s going on down the road when we have to focus on what we need to accomplish [in Daytona] in a couple of weeks.”

While set to give the new mid-engined GTE contender its competition debut in the Rolex 24 at Daytona later this month, the car’s second race will come just four weeks later at Circuit of The Americas, with a single entry having been submitted for the WEC replacement round.

Fehan said details on that program, including drivers, have yet to be determined.

He explained the reason for doing the additional WEC races is to “try as best we can” to support the globe-trotting championship.

“We understand the value that has to the sanctioning body and the value to the global fan base,” he said.

“We know it’s important but they also know the business side of it that prevents us from doing both things. They get that.

“I think they also appreciate how hard we’re trying to make all of the accommodations we can to keep the ball moving down the field. 

“It’s not easy for us and they know it’s not easy for us and they appreciate that.”

No Issues in 2019 ‘Super Sebring’ Endeavor

Fehan said the team faced no issues in its double-duty endeavor at Sebring last year, in what was only the second-ever time the team raced three cars between two different series on the same weekend. 

In addition to its over-the-wall crew and several other staff, drivers Antonio Garcia, Jan Magnussen and Mike Rockenfeller took part in both Friday’s eight-hour WEC race and the around-the-clock IMSA enduro the day later.

“That worked out great,” Fehan said. “We were lucky because we had enough equipment.

“It’s not like you can piggyback what you have set up. You’ve got to have a completely additional set of stuff.

“Between stuff that we had in stock and stuff that we had for the Cadillac program, we had enough in place.

“That system is getting better and we learned from that on all the things we did right and all the things that we know we could improve upon.”

Source John Dagys; SportsCar365


Corvette Chief Engineer Tadge Juechter is No. 4 on MotorTrend’s Power List for 2020

If you ever doubted the significance of the upcoming mid-engine Corvette, take a look at MotorTrend’s Power List for 2020, a compilation of the 50 most important names in the auto industry.

On the strength of leading the design of MotorTrend’s 2020 Car of the Year, the 2020 Corvette Stingray, Chief Engineer Tadge Juechter, unranked on the 2019 list, zoomed to the No. 4 spot in the 2020 ranking – ahead of two of his bosses, General Motors President Mark Reuss, who came in at No. 28, and GM Chairman and CEO Mary Barra, who ranked No. 6.

Said MotorTrend of Juechter:

“Juechter was able to squeeze the final dollops of power out of the C7 Corvette and then create a whole new beast: the long-awaited C8 with a mid-engine to increase power and performance. Despite all the tech, he engineered an affordable everyman’s supercar: 0 to 60 in 2.8 seconds for $60,000.”

Reuss, who moved up from No. 32 in 2019, earned the following praise from MT:

“Reuss is managing the day-to-day for an automaker as focused on the Corvette and Silverado as the goal to put 1 million electric vehicles on the road annually while developing autonomous vehicles and still making a profit. It means overseeing a leaner company going forward to fund the expensive tech.”

Barra, meanwhile, tumbled from the No. 1 spot in 2019 but still earned serious kudos from the magazine:

“Barra continues to be the tough, shrewd, and strategic leader that GM needs to remain profitable while investing heavily in electric and autonomous vehicles. Her decisive, no-nonsense approach has led to unpopular decisions to discontinue models, stop production, and cut jobs to meet long-term financial goals.”

Another GM leader, Chief Financial Officer Dhivya Suryadevera, was unranked in 2019 but made it to No. 23 for 2020.

MotorTrend says of her:

“In charge of GM’s finance department since 2018, Suryadevara is pivotal in achieving annual cost reductions of $4.5 billion through 2020—ensuring the automaker has the resources for ambitious EV and autonomous vehicle plans while keeping things running during a protracted labor strike.”

At the top of the 2020 list is MotorTrend’s Person of the Year, someone you may never have heard of, Peter Schreyer, President, Head of Design Management, for Hyundai Motor Group.

Writes MotorTrend of its No. 1 pick:
“Schreyer once said he wishes he could be a painter. The MotorTrend 2020 Person of the Year has taken a Korean canvas and created a masterpiece.”

Original source: Mitch Talley, CorvetteBlogger