Expected this week from the Corvette Team is the 2021 Corvette pricing schedule and its now available to dealers. A copy was leaked to the internet and now we can see exactly where GM will be raising prices of select 2020 options as well as setting the price for new options for the 2021 model year.
The Corvette Team made a promise back at the Virtual NCM Bash that base pricing would not change from the 2020 model year. That commitment includes the 1LT, 2LT, and 3LT pricing for the Stingray Coupe and Convertible. Those prices are unchanged* and are:
- $58,900 – 1LT Coupe
- $66,200 – 2LT Coupe
- $70,850 – 3LT Coupe
- $66,400 – 1LT Convertible
- $73,200 – 2LT Convertible
- $77,850 – 3LT Convertible
*Prices do not contain the mandatory destination fee of $1,095.
However, we did guess correctly that certain options would most likely be raised for the 2021 model year. These are the returning options from 2020 with the new 2021 Pricing. I have also included the 2020 pricing in parenthesis. The most popular options receiving a price increase are the Z51 Performance Package and the E60 Front Lift:
- Z51 – Z51 Performance Package $5,995 ($5,000)
- E60 – Front Lift $1,995 ($1,495)
- 5DF – Black Trident Spoke Wheels $2,895 ($2,695)
- 5JR – Carbon Fiber Mirror Covers $1,245 ($1,145)
- RCC – Engine Cover in Red $525 ($495)
- RCD – Engine Cover in Sterling Silver $595 ($495)
- RIA – All weather Floor Liners $205 ($195)
- CAV – Contoured Cargo Area Liners $145 ($135)
Based on 2020 Sales Data the Corvette Team released during the Virtual NCM Bash in late May, the Z51 Performance Package was ordered by 74% of buyers while the E60 Front Lift accounted for 58% of all Corvettes sold. The LPO Black Trident Spoke Wheels were only ordered by 14% of buyers.
Now for the options new to 2021, Red Mist Metallic Tintcoat is priced at $995, the same as the outgoing Long Beach Red, and the FE2 Magnetic Ride Control without Z51 will cost you $1,895. Silver Flare is the other new exterior color for 2021, but there is no additional cost to select it so it is not listed below.
- GPH – Red Mist Metallic Tintcoat $995
- FE2 – Magnetic Ride Control w/o Z51 $1,895
- DSY – Orange Full Length Racing Stripes $995
- DSZ – Red Full Length Racing Stripes $995
- DTO – Yellow Full Length Racing Stripes $995
- DUH – Blue Full Length Racing Stripes $995
- DZU – Carbon Flash/Edge Yellow Stinger Graphic $500
- DZV – Carbon Flash/Midnight Silver Stinger Graphic $500
- DZX – Carbon Flash/Edge Red Stinger Graphic $500
- SFE – Wheel Locks $95
- SQU – High Security Silver Painted Wheel Locks $105
- W2D – Cargo Net Set $110
- WKR – C8R Indoor Car Cover $1,195
- PDY – Roadside Safety Package $175
We note that some of the most popular add-ons were not listed as a 2021 pricing, that being the High Wing or the three-piece Aero Kits which were discontinued and stripped from 2020 orders. We were hoping to see those again. I am also surprised to see that the NPP Performance Exhaust pricing stayed at $1,195 which is what that price as been since it was first introduced on the 2014 Corvettes. Kudos to GM for keeping that popular option from rising as well.
As we’ve discussed, ordering for the 2021 Coupes and Convertibles starts at the end of the week and it will be a busy time for dealers so make sure you have your plans together when you sit down to spec out your Corvette order. Production of the 2021 Corvettes is expected to start in November.
The Goldilocks zone of Corvette C8 interiors?
By now, you should know that Chevrolet has started deliveries of the mid-engine 2020 Corvette. Lucky owners of the ‘Vette C8 are starting to receive their newest toy and most likely you’ve already seen one on the streets – that’s if the state you’re in is not affected by the coronavirus lockdown.
If you’re among those who are planning to purchase the new Corvette but are undecided with the trim level to choose, this video might be able to help you – especially if you’re particular with a car’s interior.
The Corvette C8 comes with three trim levels: 1LT, 2LT, and 3LT. The differences lie mainly in the features offered on each trim level, which defines that the cabin will look and feel like. That’s pretty important, considering that we spend so much time inside the car rather than staring at our investment from a distance. So, here’s a little guide.
The base 1LT trim isn’t really basic. With the entry-level trim, you already get the GT1 seats wrapped in mulan leather, a customizable 12-inch gauge cluster, push-button ignition and keyless entry, and an 8-inch Chevy MyLink infotainment system with Apple CarPlay and Android Auto, 4G LTE Wi-Fi, and 10-speaker Bose sound system. The Corvette 1LT trim is available in three color options: black, gray, or red.
Going up the 2LT trim gives you more interior color options plus features like a rearview camera mirror, a colored head-up display, heated/cooled seats, heated steering wheel, advanced blind-spot monitor, and rear cross-traffic warning. The infotainment gets upgraded as well with a wireless charger and a 14-speaker Boss audio system.
Finally, the 3LT trim dials up the ante by adding a premium Nappa leather with suede microfiber accents – all in combination with the GT2 seats that have more bolsters. These seem not a lot but the range-topping trim adds luxury to the sports coupe.
If you’re still undecided, watch the 2LT interior review on top of this page to check whether you need to take it down a notch to 1LT or go all out on the top-level 3LT.
Source: HorsePower Obsessed
[UPDATE] Contacted by Motor1.com, GM spokesperson Chris Bonelli says production of the new Corvette will begin in February.
It’s a great day for those who have signed their names on the dotted line to buy a C8 as it appears production of the mid-engined Corvette has finally started. The eighth generation of Chevrolet’s popular sports car was originally scheduled to hit the assembly line towards the end of 2019, but the UAW strike took its toll and forced General Motors to push back production until February.
It looks like they’ve managed to get everything ready a few days sooner, with production at the Bowling Green, Kentucky factory now underway. The reveal comes to us from Chevy salesperson Mike Davenport through his YouTube channel called “Chevy Dude” where he regularly posts videos about everything interesting that’s going on related to the C8 and other models that have the bowtie emblem. He was the first to break the news about Chevy cutting back on dealer allocations for the Corvette’s 2020 model year, which was shortly confirmed to Motor1.com by a spokesperson.
It goes without saying Chevy Dude is talking about the production of customer cars, including his very own C8. Another tidbit revealed is about the cancellation of the optional exposed carbon fiber ground effects for the 2020MY due to supplier issues. If you have ordered the car already with this option, Chevy will have no other way but to delete it.
For those who haven’t pre-ordered the new Corvette and are interested in getting the 2020MY, it appears April is going to be the last month when dealers will be able to ask Chevy for cars. Interestingly, Chevy Dude also knows the production of the mid-engined sports car will transition to the 2021MY in September.
That effectively means the initial model year of the C8 will only be in production for about seven months. We also get to learn the first cars will hit dealers across the country around mid-February or closer to the end of the month.
As you might have heard already, the 2021MY is rumored to come with a price bump, but nothing is official at this point. All we have for the time being is a rumor originating from a “well-placed source” cited by Motor Trend who is saying the Corvette will lose the sub-$60,000 sticker. Chevy Dude doesn’t expect the price increase to be significant, based on his 20-year experience in selling cars and analyzing Corvette pricing changes from one model year to the next.
Motor1.com has reached out to Chevy for comment and will update the article if we get a response.
Source: Chevy Dude / YouTube
Honored to be featured in the NC State Alumni Magazine…
Check it out @ http://www.debotech.com/news/Lightweight-Contender/62005
Hans deBot, a local businessman and entrepreneur, was inducted into the Mechanical and Aerospace Engineering (MAE) Hall of Fame at NC State University on November 1, 2013. He was nominated for this honor by his colleagues and was selected by the faculty and Dean of the MAE Department at NC State.
See full article @ http://www.debotech.com :