Carbon Fiber Extreme

2016

10 Essential Options For The C8 Corvette Stingray

If you’re going to tick option boxes, then these are the ones to concentrate on.

The C8 Corvette is finally in production, which means people can start getting excited about their orders. The new Chevrolet Corvette comes well-stocked from the factory before you hit the options list, and the mid-mounted 6.2-liter V8 engine with a dry-sump oil system making 490 hp and 465 lb-ft of torque is just the beginning. It also comes with an 8-speed dual-clutch transmission, a limited-slip rear differential, Brembo brakes, a 10-speaker Bose sound system, 8-way power seats, keyless entry, and remote start, and a starting price of $59,995.

That’s one hell of a lot of car for five bucks shy of $60,000, and we would not turn our nose up at a base model. A lot of people are going to tick options though, so for those that are going to go beyond the base model goodness, these are the must-haves, and how we would go about speccing out a C8 Corvette.

1. 2LT Package

If you want more creature comforts for daily driving duties, the 2LT Package adds heated and ventilated seats, a head-up display, wireless phone charging, memory seats, upgraded digital rear-view mirror, forward-facing camera, power-folding mirrors, blind-spot monitoring, and rear-cross-traffic alert. For track days, it also includes a performance data recorder. It adds $7,300 to the price, but if it’s not going to be stored in the garage for weekends, this is the way to go.

The 3LT trim adds even more luxury to the Corvette but also pushes it over the $70,000 price point before anything else is added.

2. Z51 Performance Package

Whether you want the added convenience of the 2LT Package or not, any enthusiast will want the performance package for $5,000. It adds a performance exhaust, electronic limited-slip differential, a different rear axle ratio, upgraded Brembo brakes, improved engine cooling, front brake cooling inlets, Z51-specific front splitter and rear spoiler, and Michelin Pilot Sport 4S tires.

It also adds an extra spoonful of power, taking the 490 hp and 465 lb-ft of torque up to 495 hp and 470 lb-ft of torque. However, that’s purely from the performance exhaust which can be added without the Z51 package for $1,195.

3. Paint

Let’s face it, everyone and their neighbors will be ordering their C8 Corvette with red, white, yellow, or black paint. Which is a shame as there are some seriously cool colors available. We are partial to the Zeus Bronze Metallic, but we know that’s not going to be bold enough for many. Thankfully, the Elkhart Lake Blue Metallic is available and looks stunning. Rapid Blue is the lighter shade, but the darker hue of the Elkhart Lake Blue is sophisticated, accentuates the lines of the Corvette’s bodywork, and with the black accents, gives it a little extra menace without being too dark.

4. Visible Carbon Fiber

This is an easy way to ramp up the price of the C8 Corvette, so the key is to be judicious here. The $2,095 Visible Carbon Fiber grille insert is a bit much, as is the $1,145 carbon-fiber door mirror option. However, we would go for the visible carbon-fiber roof panel with a body-color surround that is not just lightweight, but can also be stored away in the rear trunk. For $3,495, you could go with the Carbon-Fiber Dual Roof Package that includes a transparent roof panel. That’s what we would opt for if the climate where you live doesn’t provide for long warm summers.

5. High Wing Spoiler

You don’t have to spec the High Wing Spoiler in Carbon Flash Metallic, but it’s the only way to get it with some paint schemes and will replace the Z51 spoiler if the package is added already. How much difference to the aerodynamics the higher spoiler makes isn’t clear, but it gives the C8 Corvette a different look. If you don’t want the optional spoiler in Carbon Flash metallic, then your paint is limited to Arctic White, Black, Shadow Gray Metallic, and Torch Red.

6. Engine Appearance Package

It’s frivolous and costs $995, but the carbon-fiber closeout panels on each side of the engine and LED lighting illuminating the engine compartment is a nice touch for the mid-engined sports car. You can get engine covers with different color accents, but in plain black with the bare carbon-fiber being lit up keeps things tasteful when looking through the rear window.C

7. Upgraded Seats

If you’re reading this and want a C8 Corvette, you’re probably planning on driving hard. They’re expensive at $1,995, but the Competition Sport Bucket Seats increase lateral support when cornering at speed on the track, and the high-wear areas are bolstered with harder wearing textiles.

The less hardcore option is the GT2 bucket seats, which look cool, but are more about comfort than holding you in place. For around the same price as the Competition Sport Bucket Seats, you can also get the GT2 seats in two-tone with Sky Cool Gray, Adrenaline Red, and Natural seat colors.

8. Carbon-Fiber Interior Trim

Carbon-fiber trim is played out on cars that don’t deserve it, but we think the C8 Corvette is worthy. The carbon-fiber material replaces the plastic black that holds the instrument cluster with a carbon-fiber frame. It also adds carbon-fiber to the center console below the infotainment screen and to the door switch plates. It’s costly at $1,500, but we think its a must-have if you’re splashing out on the new Corvette.

9. Wheels

The $1,495 Trident Spoke wheels with their Y-shaped elements are going to be a popular box to tick in one of the two finishes available, but we also like the more low-key but stylish 5-open-spoke Carbon Flash-painted aluminum wheels. The Carbon Flash takes the shine off the wheels and helps keep the Corvette looking sleek. A lot of people will be going after-market, but this is a great option for staying stock. There’s no option for size, though, and all styles and colors are for the staggered setup featuring 19-inch wheels on the front and 20-inch discs on the back.

10. Corvette Museum Delivery

Buying a new car, let alone a new Corvette, is not something people often do. That’s why we like the idea of the National Corvette Museum delivery program. You can take a few days and go to Bowling Green, Kentucky, where your car is built and take a tour of the museum where your Corvette will be displayed. Then you’ll have a delivery presentation, followed by a drive-off ceremony. As you road trip home, you’ll be able to admire the personalized interior plaque on the dashboard with your name, VIN, and the NCM logo engraved upon it.

We knew by the time we loaded one up it would get much more expensive than the $59,995 entry level, and optioned out with everything we talk about here, you’re looking at $83,610 before delivery.

 Ian Wright CarBuzz


Rare drawings, documents reveal secret history of mid engine Corvette

From an acclaimed concept car John DeLorean reportedly dismissed because he wanted something “smaller and more European,” to the design that ended a feud between a pair of GM giants — but may have set the Corvette back decades — a trove of unique documents, sketches and models tells a secret history of the 60-year quest to build a mid engine Chevrolet Corvette.

The story begins in the late 1950s with legendary Corvette chief engineer Zora Arkus-Duntov and came to fruition when the first mid engine 2020 Corvette Stingray sold for $3 million at auction in January.

Titled “The Vision Realized: 60 Years of Mid engine Corvette Design” and created by GM Design Archive & Collections, the exhibit included 19 original sketches by designers including Larry Shinoda and Tom Peters, the massive 4-Rotor rotary engine from the 1973 Aerovette engineering, a wood wind-tunnel model, even letters from Arkus-Duntov’s personal files.

“The story of the mid engine Corvette is incredibly complicated, full of fits and starts,” said Christo Datini, manager of the GM Design Archive & Collections.  Cristo Datini at the General Motors Warren Technical Center in Warren, Michigan on Friday, January, 31, 2020

Cristo Datini at the General Motors Warren Technical Center in Warren, Michigan on Friday, January, 31, 2020 (Photo: Eric Seals, Detroit Free Press)

A mid engine Corvette was a dream shared by GM designers and engineers. The layout, in which the engine is behind the passenger compartment and immediately over the rear wheels, improves acceleration and handling. It’s been a mainstay at Ferrari for decades, and inspired repeated design and engineering projects at GM. None of them made it to production till now, largely because the Corvette’s original front-engine layout was so successful.

“Why would we change the Corvette?” GM chairman and CEO Richard Gerstenberg said to Arkus-Duntov before both men retired in the mid-1970s. “We sell every one we can make.”

‘Design without limit’

A generation of GM designers and engineers had already fought that attitude toward the sports car that debuted in 1953 model, and a couple more would before the midengine eighth-generation C8 Corvette Stingray debuted last year.

The exhibition included dozens of sketches, models, photos and documents.

“Our mission is to preserve the heritage of GM Design and educate our designers on GM’s prominence in the world of design,” Datini said. The archive also is working with the Detroit Institute of Arts on a massive exhibition dedicated to automotive design that opens this summer. 

The Corvette exhibition closed at the end of January, but elements of it are likely to be displayed at other events and locations, possibly including the National Corvette Museum in Bowling Green, Kentucky, which provided materials for the collection.Original magazines with drawings of what Corvettes could have looked like on display at the General Motors Warren Technical Center in Warren, Michigan on Friday, January, 31, 2020

Original magazines with drawings of what Corvettes could have looked like on display at the General Motors Warren Technical Center in Warren, Michigan on Friday, January, 31, 2020 (Photo: Eric Seals, Detroit Free Press)

Chevrolet Engineering Research Vehicle I, Also called SERV I and XP-708, was the beginning. A running model that debuted in 1960, the car had the looks of an Indy car and a chassis that tested what a midengine layout could do. It was “a design without limit” and an “admirable tool” to help Chevy figure out “what to put in Corvette,” said Duntov, himself a former driver in the 24 Hours of Le Mans sports car race.

CERV I was used as a test vehicle for years. Larry Shinoda, who would go on to be known as the father of the ’63 Corvette Stingray and the Mako Shark concept car, tweaked its design repeatedly as engineers tested it with seven different power trains.

GM eventually retired CERV I, selling it to the Briggs Cunningham Automotive Museum for $1. When the museum failed in the 1980s, GM bought it back for “somewhat more,” Datini said.A model of the 1968 Chevrolet mid-engine Corvette Roadster that is one of many items for General Motors workers to see at the Corvette design display at the General Motors Warren Technical Center in Warren, Michigan on Friday, January, 31, 2020

A model of the 1968 Chevrolet mid-engine Corvette Roadster that is one of many items for General Motors workers to see at the Corvette design display at the General Motors Warren Technical Center in Warren, Michigan on Friday, January, 31, 2020 (Photo: Eric Seals, Detroit Free Press)

Corvettes the world never saw

Shortly thereafter, Duntov heard rumors Ford was developing a Le Mans racer to challenge Ferrari and launched work on CERV II. GM decided not to race, Ford and Carroll Shelby built the GT40 that inspired “Ford vs. Ferrari,” and the CERV II was used as an engineering test bed at secret proving grounds and never seen by the public during its active lifetime. Built in 1964, CERV II had a 500-horsepower V8, 210-mph top speed and 2.8-second 0-60 mph time.

A picture of the CERV II Corvette. The sports car never went into production but it was influential in the design of the C5 production Corvette. (Photo: Eric Seals, Detroit Free Press)

“By that time, engineers and designers knew a midengine chassis was necessary” to get maximum performance from the ‘Vette, Datini said. Putting the engine behind the passenger compartment puts the car’s weight over the rear wheels to put down more power without spinning. Shifting balance from the production ‘Vette’s nose-heavy weight distribution would also improve handling.

Also in 1964, the XP-819 experimental car was being tested. Designed by Shinoda, it bore a strong resemblance to 1970 Corvettes, but Duntov hated it, calling it an “ugly duckling” at least in part because he wished his engineering team got some of the budget allotted to designing the car. It had a 327 cubic-inch V8 and pop-up headlights.

Like many concept and engineering vehicles, XP-819 was destroyed, chopped up. Years later, the pieces were found in NASCAR designer and mechanic Smokey Yunick’s garage.

Half Corvette, half Porsche

With a name GM would later recycle on a minivan, the Astro II XP-880 was never publicly identified as a Corvette, but it was one, intended for production in 1970, but never got there. It debuted at the New York auto show, featuring a nose, front fenders and Firefrost Blue paint that that foreshadowed 1970s production cars.

DeLorean, then Chevrolet general manager, asked for a rush program to create a different midengine design to match the midengine Pantera Ford was developing with Italian sports car maker De Tomaso to debut at the 1970 New York auto show. The XP-882 had a tapering body with dramatic fender flares and a louvered rear window like the Mako Shark II concept car. Like so many midengine ‘Vettes before and after, GM brass decided to stick with the tried and true front-engine layout.

Also in the 1970s GM president Ed Cole — another legendary engineer who led the development of the small block V8 and catalytic converter, among other achievements — became enamored with the Wankel rotary engine. Duntov built two midengine experimental ‘Vettes with rotary engines, glad for Cole’s support despite not sharing his enthusiasm for the engine.Sketching and notes about the Corvette, one of the many originals on display for workers to see at the General Motors Warren Technical Center in Warren, Michigan on Friday, January, 31, 2020

Sketching and notes about the Corvette, one of the many originals on display for workers to see at the General Motors Warren Technical Center in Warren, Michigan on Friday, January, 31, 2020 (Photo: Eric Seals, Detroit Free Press)

The 1973 Corvette 2-Rotor XP-987GT was a smaller, European-scale sports car with a rotary engine. The body was all Corvette, but its chassis came from a Porsche 914. Italian design house Pininfarina built its body. GM displayed the 2-Rotor at auto shows in Frankfurt and Paris before the car disappeared, probably sold to a collector.

Bill Mitchell’s most beautiful car

At the same time, Duntov wanted to develop a bigger midengine Corvette. He and Cole hadn’t been on speaking terms since Duntov refused an annual bonus he thought was insultingly small. They made up, at least in part because Duntov wanted a budget to develop what would become the Corvette 4-Rotor Aerovette, an iconic, gull wing design. Duntov believed it was the most beautiful vehicle GM design chief Bill Mitchell oversaw in a career that included the ’57 Chevy Bel Air and ’66 Buick Riviera. 

Duntov recycled the XP-882’s chassis for the Aerovette, which featured silver leather interior trim.A picture of the Aerovette featuring bi-fold gulping doors in the sports car that was never made. It is one of many photographs, drawings and sketches on display on all things Corvette design inside the General Motors Warren Technical Center in Warren, Michigan on Friday, January, 31, 2020

A picture of the Aerovette featuring bi-fold gulping doors in the sports car that was never made. It is one of many photographs, drawings and sketches on display on all things Corvette design inside the General Motors Warren Technical Center in Warren, Michigan on Friday, January, 31, 2020 (Photo: Eric Seals, Detroit Free Press)

Despite the car’s striking appearance, Duntov would come to believe his agreement to use a rotary engine was a nail in the midengine ‘Vette’s coffin.

Despite that, another midengine engineering car arrived in 1974. The XP-895 began its life with a steel body. Intrigued by the idea of lightweight materials, DeLorean asked Reynolds Aluminum to create an aluminum body. That cut the car’s weight by nearly 40%, but DeLorean pulled the plug on the project because he wanted a smaller, more European design.

That never happened, and design work on midengine ‘Vettes came to a halt for more than a decade, as GM struggled meeting the challenge of higher fuel prices.

Closing the deal

By 1986, the quest for a midengine Corvette was ready to create another giant figure, and it got one when a young designer named Tom Peters began work on the Corvette Indy concept car. Peters went on to become the chief designer of the sixth- and seventh-generation C6 and C7 Corvettes and play a key role in starting work on the 2020 C8.

With a radically short hood compared to production ‘Vettes and cutting-edge technologies including four-wheel steering, traction control and active suspension, the Indy — so named because it used a 2.65L V8 Chevy developed for Indy Car racing —  kept dreams of the midengine ‘Vette alive

The 1990 CERV III — this time the C stood for “Corporate,” not Chevrolet Engineering Research Vehicle — was the next step. Datini’s research convinced him it was an attempt at a production version of the Indy.

CERV III had scissors doors and was built of Kevlar, carbon fiber and aluminum. With a 650-hp twin-turbo 5.7L  V8, GM predicted a top speed of 225 mph. It debuted at the 1990 North American International Auto Show in Detroit.

After that, work on the midengine Corvette went undercover for two decades. Photos of disguised prototypes at test tracks surfaced from time to time, but the car seemed to be as much myth as metal. There are whispers the Great Recession halted work on one, setting development back years.A display of Zora Arkus-Duntov known as "The Godfather of  the Corvette" at the General Motors Warren Technical Center in Warren, Michigan on Friday, January, 31, 2020.

A display of Zora Arkus-Duntov known as “The Godfather of the Corvette” at the General Motors Warren Technical Center in Warren, Michigan on Friday, January, 31, 2020. (Photo: Eric Seals, Detroit Free Press)

Development of the 2020 Corvette Stingray began around eight years ago, a long time for most projects, but the blink of an eye when it’s the last chapter of a 60-year story.

Mark Phelan for Detroit Free Press


Corvette Heaven: 2020 Corvettes at the Corvette Assembly Plant

[PICS] Corvette Heaven Part II: 2020 Corvettes at the Corvette Assembly Plant

Following Jeremy Welborn’s insightful post last week on Customer Ordered 2020 Corvette Production Starting, a reader left a comment about stopping by the Corvette Assembly Plant and seeing twenty-five C8 Corvettes in the parking lot. Thanks to Jeremy’s follow-up, Jay sent us some of his favorites that he took and gave us permission to share.

We’re calling this Corvette Heaven Part II as it seems to dovetail perfectly with yesterday’s blog post with an instagram video showing fifteen 2020 Corvettes lined up in a row.

From Jay Shellabarger:

I was at the Bowling Green Assembly Plant and Museum to see Shane for my Museum Delivery on Thursday, January 30th from 2:30pm to 4:30pm. I went directly to the Assembly Plant and looked at twenty-five C8 Corvettes in the parking lot and I took a hundred photos. I had been told all the pre-production cars would be smashed. I read where you state the VIN numbers are 5100001. Starting with 51 and all the cars I saw started with 50. I took photos of the VIN numbers too. I saw cars 5000028 (#28), 30, 56, 62, 124, 137, 138. 139 many up to number 5000375 (#375). I had a fun afternoon driving into the different parking lots (including employee parking lots) and looking at the C8’s produced. They are simply BADASS looking and I can’t wait to obtain my white C8.

Jay managed to capture nine of the twelve colors and several cars have full-length body stripes. We noticed that Jay also captured a Sebring Orange 2020 Corvette Stingray Coupe wearing thr 5VM Visible Carbon Fiber Aero Kit:1

TITLE

Jay tells us he has an Arctic White C8 Coupe on order and he is customizing it with the High Wing and he also tells us he’ll be adding his own stripes to the car as well as chrome wheels! Sounds like a stunner, Jay!

Here’s the photos of the C8 Corvettes from the Bowling Green Assembly Plant last week:

Midyear Monday!
Midyear Monday!
Midyear Monday!
Midyear Monday!
Midyear Monday!
Midyear Monday!
Midyear Monday!
Midyear Monday!
Midyear Monday!
Midyear Monday!
Midyear Monday!
Midyear Monday!
Midyear Monday!
Midyear Monday!

Midyear Monday!
Midyear Monday!
Midyear Monday!
Midyear Monday!
Midyear Monday!
Midyear Monday!
Midyear Monday!
Midyear Monday!
Midyear Monday!
Midyear Monday!
Midyear Monday!

Source:
Photos by Jay Shellabarger


Mid-Engined Chevy Corvette C8 Production Has Started: Report

[UPDATE] Contacted by Motor1.com, GM spokesperson Chris Bonelli says production of the new Corvette will begin in February.

It’s a great day for those who have signed their names on the dotted line to buy a C8 as it appears production of the mid-engined Corvette has finally started. The eighth generation of Chevrolet’s popular sports car was originally scheduled to hit the assembly line towards the end of 2019, but the UAW strike took its toll and forced General Motors to push back production until February.

It looks like they’ve managed to get everything ready a few days sooner, with production at the Bowling Green, Kentucky factory now underway. The reveal comes to us from Chevy salesperson Mike Davenport through his YouTube channel called “Chevy Dude” where he regularly posts videos about everything interesting that’s going on related to the C8 and other models that have the bowtie emblem. He was the first to break the news about Chevy cutting back on dealer allocations for the Corvette’s 2020 model year, which was shortly confirmed to Motor1.com by a spokesperson.

It goes without saying Chevy Dude is talking about the production of customer cars, including his very own C8. Another tidbit revealed is about the cancellation of the optional exposed carbon fiber ground effects for the 2020MY due to supplier issues. If you have ordered the car already with this option, Chevy will have no other way but to delete it.

For those who haven’t pre-ordered the new Corvette and are interested in getting the 2020MY, it appears April is going to be the last month when dealers will be able to ask Chevy for cars. Interestingly, Chevy Dude also knows the production of the mid-engined sports car will transition to the 2021MY in September.

That effectively means the initial model year of the C8 will only be in production for about seven months. We also get to learn the first cars will hit dealers across the country around mid-February or closer to the end of the month.

As you might have heard already, the 2021MY is rumored to come with a price bump, but nothing is official at this point. All we have for the time being is a rumor originating from a “well-placed source” cited by Motor Trend who is saying the Corvette will lose the sub-$60,000 sticker. Chevy Dude doesn’t expect the price increase to be significant, based on his 20-year experience in selling cars and analyzing Corvette pricing changes from one model year to the next.

Motor1.com has reached out to Chevy for comment and will update the article if we get a response.

Source: Chevy Dude / YouTube


ROLEX 24 AT DAYTONA – AN IMPRESSIVE DEBUT FOR THE NEW CORVETTE C8.R

The 58th Rolex 24 at Daytona, the first round of the 2020 IMSA WeatherTech SportsCar Championship season, saw the first race for the new Corvette C8.R, the participation of an all-female driver line-up, 2019 NASCAR champion Kyle Busch’s first start in a 24-hour race and Ben Keating at the wheel of two different cars.

A NOTEWORTHY DEBUT FOR THE NEW CORVETTE C8.R

The #3 Corvette C8.R finished the first 24-hour race of its career in fourth place in GTLM (the equivalent of LMGTE Pro at the 24 Hours of Le Mans). Drivers Antonio García, Jordan Taylor and Nicky Catsburg encountered zero problems with the car and completed 785 laps (nearly 5,000 kilometers). Unfortunately, the same cannot be said of the #4 Corvette C8.R of Gavin-Milner-Fässler. As the car was in the top 5 in its class going into the ninth hour, an oil leak caused the car to return to its garage. The leak was found to be in an area that forced the mechanics to remove the engine for repair and the work took almost nine hours. The #4 was then able to hit the track again and finished the race in 36th place.

Much like the 24 Hours of Le Mans, the 24 Hours of Daytona is an extremely challenging race. To make it to the checkered flag with an all-new car is already a major accomplishment for Corvette Racing. The American team’s next stop is the 6 Hours of the Circuit of The Americas on Sunday 23 February in Austin, the fifth round of the 2019-2020 FIA World Endurance Championship season.

AN ALL-FEMALE DRIVER LINE-UP

All-female driver line-up Christina Nielsen, Katherine Legge, Tati Calderon and Rahel Frey shared GEAR Racing powered by GRT Grasser’s Lamborghini Huracan GT3 in the GTD class, but the car was forced to retire after a fire.

KYLE BUSCH ENJOYS HIS FIRST ENDURANCE RACE

2019 NASCAR champion Kyle Busch took the start in his first Rolex 24 at Daytona at the wheel of the AIM VASSER SULLIVAN team’s Lexus RC-F GT3. Along with teammates Parker Chase, Jack Hawksworth and Michael de Quesada, Busch finished 26th overall and ninth in the GTD class. The American driver pulled off a double and a triple stint without the slightest mistake and said after the race he really enjoyed the experience and hopes to return for the overall win.

BEN KEATING DOUBLES DOWN

Ben Keating participated in his 10th Rolex 24 at Daytona at the wheel of not one but two cars: the #52 ORECA 07 fielded by PR1 Mathiasen Motorsports in the LMP2 class and the #74 Mercedes AMG-GT3 fielded by Riley Motorsports in GTD. Both cars crossed the finish line, the #52 ORECA 07 in 10th place overall and second in its class two laps from the winners, and the #74 Mercedes AMG-GT3 in 29th place overall and 11th in its class. This was the fifth time Keating participated in the race with two different cars.

Source: 24H LE MANS


Electric Corvette breaks top speed record at 211.8 mph (340.85 km/h)

Genovation broke its own record with its all-electric Corvette supercar by achieving a top speed of 211.8 mph (340.85 km/h).

At this point, we have been reporting on Maryland-based custom carmaker Genovation’s effort to bring an all-electric Corvette to market for years now.

They were supposed to launch their car, which they call the Genovation GXE, in 2018, but they are now talking about 2020 deliveries.

In the meantime, they have been breaking electric top speed records with their prototype.

In 2016, their modified battery-powered Z06 Corvette reached a record-breaking speed of 205.6 mph.

A year later, they broke their own record with a new top speed of 209 mph.

They have kept working on their prototype, and they now announced that they have achieved a new record top speed of 211.8 mph (340.85 km/h):

Andrew Saul, CEO of Genovation Cars, commented on the new achievement:

Andrew Saul, CEO of Genovation Cars, commented on the new achievement:

During the December test, we broke our previous speed record that was set in September of this same year. That earlier record run was hampered by strong crosswinds, so we were confident that under better weather conditions we could improve upon that result.

He added:

We are thrilled to be the only electric car manufacturer to not only test our vehicle’s record-breaking capabilities, but to validate and achieve this milestone not once, not twice, but three times. Based on the early analysis of the data generated from the new record, we’re confident that we can gain efficiencies which will result in further top end speeds.

The vehicle is equipped with a seven-speed manual transmission (optional paddle shifting eight-speed automatic), which can definitely help reach higher top speeds than single-speed vehicles, like most EVs available today.

However, when it comes to the range, the Genovation GXE is limited to what the company refers to as “more than 175 miles on a full battery charge.”

Original Source: Fred Lambert; Electrek