Carbon Fiber Extreme

Posts tagged “carbon fiber

Open-Throttle Therapy Awaits In A 2020 Chevy Corvette Z51

A small donation to Ronald McDonald House could permanently put you in the driver’s seat of the fastest production Corvette yet!

Commonly referred to as “America’s Sports Car”, the Chevrolet Corvette has been offering thrills since its big unveiling back in 1953. With 60 years of production over eight generation designs, the all-new C8 Corvette is a game-changer. For the first time, the model is powered by a mid-mounted V8 engine. Even the C8’s body was drastically redesigned for aerodynamics, but stunning enough to stop car enthusiasts dead in their tracks. Get get your hands on the fastest production Corvette yet – a 2020 Chevrolet Corvette Z51 with 3Lz trim. A small donation to the Ronald McDonald House will enter you into the drawing for this incredible C8. Enter the code WIN here to receive double entries!

<img src="2020-corvette.png" alt="2020 Chevrolet Corvette Z51 being offered through Ronald McDonald House">
Ronald McDonald House

Finished in a stunning Elkhart Lake Blue Metallic, the exterior is nothing short of magnificent. On all four corners sit staggered 5-spoke Carbon Flash-painted aluminum wheels (19-inch front, 20-inch rear) wrapped with sticky Michelin Pilot Sport 4S rubber. Further complementing the exterior is the addition of a high-wing Carbon Flash rear spoiler and an exposed carbon fiber ground effects kit. Open the doors to a stunning black interior that features carbon fiber trim and GT2 bucket seats.

​Powered by a mid-mounted 6.2-liter LT2 V8 engine with an appearance package, the new C8 generates 495-horsepower and 470 lb/ft of torque that can propel this car from 0 to 60 miles per hour in a lightning quick 2.9 seconds. Sending that power down to the rear wheels is an 8-speed Dual Clutch automatic transmission. The Z51 Package gives this aggressive Corvette a unique Z51 adjustable performance suspension, an electronic limited-slip differential, an altered axle ratio, large Z51 Brembo brakes, a sport exhaust, enhanced cooling, and improved traction.

If you’re looking for a car that is can drive to the track, smoke the competition, and then drive home, look no further than this performance-oriented 2020 Chevrolet Corvette Z51. Even if the track isn’t your thing, this would make one head-turning daily driver. A small donation to the Ronald McDonald House will enter you into the drawing for this incredible C8. Enter the code WIN here to receive double entries! The Ronald McDonald House helps support families to stay close to their child while they receive treatment at a local hospital.

*Actual Corvette may vary from images above based on availability.*

Sign up for the Motorious Newsletter. For the latest news, follow us on FacebookTwitter, and Instagram.

Amie Williams for Motorious


Corvette Racing at Road America: Another Wild 1-2 Finish for Corvette C8.R

By Corvette Racing -Aug 2, 2020

Corvette Racing at Road America: Another Wild 1-2 Finish for Corvette C8.R


Garcia, Taylor take second GTLM win of season; Gavin, Milner finish as runners-up

ELKHART LAKE, Wis. (Aug. 2, 2020) – Corvette Racing took its second consecutive 1-2 finish in the IMSA WeatherTech SportsCar Championship’s GT Le Mans (GTLM class) following a chaotic finish Sunday at Road America. Antonio Garcia and Jordan Taylor won for the second time in their No. 3 Mobil 1/SiriusXM Chevrolet Corvette C8.R following a late-race pass in torrential rain.

Oliver Gavin and Tommy Milner placed second in the sister No. 4 Corvette C8.R. It was the eighth victory at Road America for Corvette Racing, and the team’s first there since 2016. Garcia and Taylor both won for the first time in their IMSA career at Road America and extended their points lead to 10 in the class. Gavin and Milner unofficially moved to third in the standings.

Chevrolet also grew its lead in the GTLM Manufacturer’s Championship to eight points. Corvette Racing has now won three consecutive races in the category.

Corvette Racing at Road America: Another Wild 1-2 Finish for Corvette C8.R


Things weren’t looking positive for the first half of the race. Taylor, who qualified second, led early but the expected tire degradation reduced the pace for the GTLM cars. Adding to the problems for the team were electronics issues on the No. 4 Corvette that left both Gavin and Milner without traction control.

The predicted rain for the race came with just under an hour to go. Garcia, who took over with two hours left in the race, was the first GTLM runner to pit for rain tires and stopped from sixth place. Two other GTLM cars followed suit but three others stayed out, including the then-leading Porsche which skidded off-track during a downpour at Turn One.

Corvette Racing at Road America: Another Wild 1-2 Finish for Corvette C8.R


Milner remained on slick tires during the first deluge as officials halted the race with 43 minutes left. The rain let up initially before cars returned to the track with about 25 minutes to go once the red flag was lifted. Following the final pit stops for wet tires, racing resumed with seven minutes left and Garcia in second place.

An even more intense rain began to fall with just minutes left in the two-hour, 40-minute race. Garcia was locked in a back-and-forth duel with Porsche’s Nick Tandy just before the GTLM leader and the third-place Porsche went off-track late in the lap. Both Garcia and Milner, who did a masterful job on a wet track with no traction control, were able to get through the chaos and took the checkered flag under a race-ending, full-course caution period.


Corvette Racing’s next event is the GT-only Michelin GT Challenge at Virginia International Raceway on Saturday, Aug. 22.

ANTONIO GARCIA, NO. 3 MOBIL 1/SiriusXM CHEVROLET CORVETTE C8.R – GTLM RACE-WINNER:

“It was super tough. Because of the wave-by, we were at the back of all the GTD cars. So the spray we had back there was amazing. It was impossible to see anything. The first thing was to go by a couple of LMP2 cars while fighting (Nick) Tandy to catch up to the 24 BMW. It was a very intense three laps. I knew from Sebring practice that the Corvette C8.R was really good in the wet, even if today was beyond wet! I had Nick all over me, and we had many times when we were together… almost just sailing together instead of racing together. I knew the Carousel and the Kink were going to be really bad, and the line I took on the previous lap seemed to work. Luckily enough for me it was the same and I was one of the few cars to make it through. It’s another 1-2 finish for Corvette Racing, which is amazing. It’s finally my first victory at Road America, so it’s been a very good weekend.”

WHAT DID YOU SEE OF THE BMW AHEAD OF YOU? DID HE SPIN ON HIS OWN? “The Carousel and the Kink were almost impossible to go through that part of the track. There is really nothing you can do there. It depends on the depth of the water. The Corvette C8.R survived it better than the rest. I don’t know if it was due to the race line I took. I was following the car behind me and saw the BMW lose control. The race still wasn’t done because I had to do another lap through there. It’s a credit to how good the C8.R is in the wet. Thanks to everyone at Team Chevy because this car seems to be working in all conditions.”

HOW IMPORTANT IS THIS WIN TO EXTEND YOUR POINTS LEAD? “We didn’t know starting the season how the C8.R would be. With the fourth at Daytona, we saw the potential of the car. Our team did a great job during the shutdown with fixing things that needed to be corrected. We’ve had a chance to win the last three races, and we’ve converted those. We need to keep putting pressure on everyone and make the rest of the field make mistakes. On our own, we need to be their in the end and maximize our points opportunities. The next one is VIR, where we have tested with the new Corvette. We will do what we can to keep this momentum and carrying on winning.”

JORDAN TAYLOR, NO. 3 MOBIL 1/SiriusXM CHEVROLET CORVETTE C8.R – GTLM RACE-WINNER:

“It was a wild day…very unexpected. The race started off strong for us. We took a different strategy to go with three stops from the beginning. Thankfully it worked out well with the timing the rain and track position. Antonio never gave up. It was a tough fight in tough conditions, but he did a great job of surviving for our second win of the year and third of the year for Corvette Racing.”

THIS RACE WAS ON THE NATIONAL NBC NETWORK. WAS THIS THE KIND OF EXCITEMENT THAT WAS GOOD FOR NETWORK TV? “It had a bit of everything. The start for me was exciting, and the battles were all good. I could see on the big screen across the frontstretch that the prototype battle was often exciting and had a little bit of everything with the strategies. The weather was a bit different for those who probably turn into NBC for NASCAR where they wouldn’t run in the rain. There were probably too many crashes for everyone’s liking, but the show was very exciting with the battle for the win at the end. You like to see that between the manufacturers.”

TALK ABOUT WINNING ON THE SAME DAY AS YOUR BROTHER (RICKY TAYLOR): “It’s definitely cool. I think this is the first time we’ve won on the same weekend. I know we’ve gotten a pole on the same weekend, but in all the years a win has never gone both our ways. It was cool to watch their battle at the end with the 10 car. I know my dad’s team hasn’t won here either, and we tried hard for many years.”

Corvette Racing at Road America: Another Wild 1-2 Finish for Corvette C8.R


OLIVER GAVIN, NO. 4 MOBIL 1/SiriusXM CHEVROLET CORVETTE C8.R – FINISHED SECOND IN GTLM:

“I take my hat off to the team every time for never giving up. It didn’t look like we were going to be finishing that high up in the dry. But as we all know, there was a chance of rain all around. In this part of the world when the rain comes, it comes big. You just have to take you chances and make the right calls at the right time. We got a little lucky with a few things, and ultimately the No. 3 Corvette made the right choice on the right tires at the right time. We didn’t quite get that break or make that decision at that time. But then as all the pit stops cycled through for that last restart, we knew we just had to flat-out race. Our car was compromised a little as we didn’t have any traction control as part of an electrical issue throughout the entire race that we couldn’t really get on top of it. I fought it all during my stints. I honestly don’t know how Tommy kept the car on the track when he driving around on slick tires behind the safety car. I mean… water that was three or four inches deep on slick tires with no TC was amazing. For us to come away, even with all the stuff that happened, with a one-two finish is pretty spectacular. Hats off to the team and the crew and also to the C8.R. It seems like it is a car that can live through some crazy circumstances and conditions on track and deals with it. It’s a very fine car.”

TOMMY MILNER, NO. 4 MOBIL 1/SiriusXM CHEVROLET CORVETTE C8.R – FINISHED SECOND IN GTLM:

“That was absolutely wild. We had kind of a tough day to start with, but it came back pretty well for us there at the end. Credit to the guys with their never-give-up attitude that Corvette Racing is famous for definitely paid off today. The conditions were unbelievably difficult. The call to stay out there on slicks just before the full-course yellow was just as much mine as it was the engineers. I thought it was the right thing to do to run one more lap to see how bad the rain was going to be. And it ended up being almost biblical in the amount of rain that came. In all the races I’ve done, this has been the most rain I’ve ever seen come down at one time. It was hard enough just keeping it on the track under yellow with slicks, and it was bad enough when it was still green just trying to survive. Then it went red flag so we had the opportunity to come in and change it to rain tires. That in itself was difficult. For me I knew I just needed to get to pitlane and survive. That was the name of the game there and see what happened at the end. Once we went green, it was the most difficult conditions I have ever driven in my life with the amount of spray and with traffic and having so many cars around. At times it felt like I was driving blind. I could have closed my eyes and would have had the same amount of visibility at that point. I just tried to use very bit of muscle memory and track knowledge I could as to where the track goes at certain points. In the end, luckily we just survived with a first and second for the team. The day didn’t start out well, but it ended as well as it could.”

(Not having traction control) “Because I didn’t have it from the time I got in the car, I had to manage it from the start. In the dry, it’s definitely difficult because you are trying to not use the rear tires too much. I felt like I did a decent job in that first run but driving in the wet without it makes it that much more difficult. To be honest, the Corvette felt really good in the wet. Even though we don’t have a lot of time in the wet, the guys made the right call with tire pressure. When the Michelin wet tires are new, they’re really good. That gave me the confidence early on to really push, get through traffic, and trust in the car and tire to find the fastest way around.”

Corvette Racing at Road America: Another Wild 1-2 Finish for Corvette C8.R


Source:
CorvetteRacing.com


Legally Blind for 44 Years, a Canadian Man Has Sight Restored and Buys a Corvette

Legally Blind for 44 Years, a Canadian Man Has Sight Restored and Buys a Corvette

Seeing, quite literally, is believing for a Canadian man named Mike Schickerowski.

At age 44, he got his driver’s license just two weeks ago.

Why the delay?

Schickerowski was born with a disorder called nystagmus, which causes the brain to see images as a blur.

“My brain would never interpret the image as a steady picture,” he explained. “It basically involves involuntary movement of your eyes. If you’ve ever taken a photo with your camera and moved it slightly or the object moved and it’s a blur, it’s the exact same symptoms.”

That means Schikerowski has been legally blind his entire life, that is, until undergoing successful experimental surgery to correct the condition in California in October 2018.

He says being able to see has changed his life in many ways, most notably allowing him to take part in the simple things of life.

“I took my son fishing last week,” he said. “I was never able to do that before on my own. I took my daughter for ice cream. It’s unbelievable.”

Of course, those trips are made even more special because Schickerowski decided to splurge on his first vehicle ever – a yellow C7 Corvette Grand Sport. So confident he would pass the driver’s license exam for the first time, he purchased the flashy sports care before he even passed the test! “it was overwhelming to think I was doing it at that age,” he said, “but I did pretty well and I just couldn’t believe it.”

While some people thought he should have bought a more practical vehicle, especially living in the province of Alberta, Schickerowski says he wanted to stand out.

“Some people said, ‘Oh, it’s Alberta, you need a truck,’ and sure I like trucks — they’re nice — but everybody’s got a truck,” he said.

TITLE


Schickerowski is grateful that he is able to drive the Corvette on his own, but he was even more excited about being able to see the world clearly for the first time after the surgery was a success.

“It was beautiful to see,” he said, “but it was more the realization of what I missed my whole life. It was emotional breakdown. My mom was bawling, and my wife was ecstatic. It was never supposed to happen.”

While he says there was a “sad moment” realizing how much of his life had already gone by and “how much I had suffered,” he says he’s “still excited for the future.”

His wife, Angie, says watching Mike see things in 3D for the first time was “unbelievable – things like fireworks, there’s all these things.”

“I’ve lived a wonderful life and enjoyed every moment,” he says. “This is just the awakening to possibilities of the future and the opportunities that are there.”

Add his yellow Corvette to that list of expanding opportunities, and here’s hoping he enjoys his car for years to come.


Thanks to Bob S. for the link!


Source:
globalnews.ca


Chevy Teaser Video Hints At Something Colorful For The 2021 Corvette

The Gulf livery’s iconic colors make an appearance.

We’re quickly approaching the first anniversary of Chevy’s introduction of the 2020 Corvette C8, which happened on July 18. Now, less than two weeks ahead of that date, the Chevy Corvette’s official Facebook page shared a short, 14-second teaser video that hints at something new for the Corvette for the 2021 model year.

The post says, “It’s time to earn some new racing stripes,” while the quick-hitting teaser hints at what Chevy is “Adding to the [Corvette’s] legacy.” However, we have no idea what that means exactly. The teaser shows off some stylized Corvette footage with colored stripes crisscrossing the video. There are also four overhead shots of striped Corvettes that flash on the screen. Two are black, one with a pair of red stripes while the other has yellow ones. There’s a blue-on-white one, and another that mimics the iconic blue-and-orange Gulf livery.

For as much fanfare as the 2020 Corvette created, the Stingray model the automaker introduced was just the beginning. We expect Chevy to add more high-performance models to the Corvette lineup, like the Z06. But we don’t think Chevy is ready to reveal that top-tier model just yet. Instead, we’d bet that Chevy is planning to introduce a new appearance package, or packages, that help enhance the car’s appearance. It could be similar to the Competition Sport package Chevy introduced for the 2009 Corvette C6.

We know for sure that Chevy still has a ton of Corvette excitement to reveal going forward. Fans are eagerly awaiting the next Z06, and the numerous spy photos and videos don’t help. We know it should pack a 5.5-liter flat-plane crank V8 that’ll leapfrog the Stingray in power, performance, and price. We don’t expect that model to arrive until the 2022 model year, so until then, we can look forward to Chevy’s latest, which the automaker should reveal soon.

Source: Chevrolet Corvette / Facebook


GM reveals price, features of 2021 Corvette Stingray, including two new colors

General Motors said Wednesday it will keep the price of its 2021 Chevrolet Corvette Stingray the same as the introductory 2020 model.

The 2021 Corvette, which goes on sale late in the fourth quarter, will start at $59,995, matching this year’s model, which is about a $4,000 increase over the 2019 Corvette. Comparatively, the mid-engine Porsche 718 Cayman starts at $61,250. All prices include destination charges.

There will also be some new content in the 2021 model, GM said. 

“Our mission was to develop a new sports car, combining the successful attributes of Corvette with the performance and driving experience of mid-engine supercars,” said Tadge Juechter, Corvette executive chief engineer. “We are thrilled with the enthusiasm the mid-engine Corvette brought following its launch and are keeping it fresh with new content for the 2021 model.” 

2021 Chevrolet Corvette Stingray Coupe and Convertible (far right in new Silver Flare Metallic)

Here is what will be new on the 2021 Corvette:

  • Magnetic Selective Ride Control suspension, which is new for non-Z51 models. 
  • Standard wireless Apple CarPlay/wireless Android auto
  • Red Mist Metallic Tintcoat exterior color
  • Silver Flare Metallic exterior color
  • Sky Cool Gray/Yellow Strike interior color
  • New full-length dual racing stripe package colors: blue, orange, red and yellow
  • Stinger Stripes in three colors: Carbon Flash/Edge Red, Carbon Flash/Edge Yellow and Carbon Flash/Midnight Silver
  • Driver mode on-screen visualization and new track digital tachometer
  • Standard Buckle To Drive, a safety technology that, when active, can prevent the driver from shifting the vehicle out of park if the driver’s seat belt is not buckled for up to 20 seconds

GM will also offer on the next-generation car Chevrolet’s first eight-speed dual-clutch transmission to allow for faster shifting and more power.

Here are some other engine features on the 2021 model:

  • Engine: 6.2-liter LT2 V-8 with direct injection, variable valve timing and active fuel management
  • Transmission: eight-speed dual-clutch with manual and automatic modes
  • Six modes of Driver Mode Selector — Tour, Sport, Track, Weather, and MyMode and Z Mode customizable modes
  • Brakes: four-wheel antilock, four-wheel disc, four-piston calipers (12.6-inch front rotors, 13.3-inch rear rotors)
  • NEW: Available Magnetic Selective Ride Control suspension. It reads the road better, providing more precise data.
  • Available Z51 Performance Package: brakes, suspension, exhaust among other features
  • Z51 Performance with Magnetic Selective Ride Control, includes Performance Traction Management
  • Front lift: adjustable height with memory

Jamie L. LaReau Detroit Free Press


The Corvette Assembly Plant Has 10 Truckloads of 2020 Corvettes Ready to Ship

The Corvette Assembly Plant Has 10 Truckloads of 2020 Corvettes Ready to Ship!
Photo Credit: Jeremy Welborn


A member of the MidEngineCorvetteForum.com is offering even more proof that Corvette production has returned pretty much back to normal by sharing Saturdays shipping manifests of new 2020 Corvette Stingrays headed to dealerships. Each Jack Cooper Transporter can hold a maximum of 10 new C8 Corvettes and so this batch of 10 transports contains just under 100 cars which is nearly identical to one shift’s production totals.

From the printouts we see the VIN sequence numbers range from #805 to #4126 which was just completed last week. The cars are sorted by destination and the trucks will soon be headed to Texas, Oklahoma, Florida, South Carolina, and Maryland. The NCM is receiving two trucks and one load will be headed north to Canada.

2020 Corvette Shipping Manifests
2020 Corvette Shipping Manifests
2020 Corvette Shipping Manifests
2020 Corvette Shipping Manifests
2020 Corvette Shipping Manifests
2020 Corvette Shipping Manifests
2020 Corvette Shipping Manifests
2020 Corvette Shipping Manifests
2020 Corvette Shipping Manifests
2020 Corvette Shipping Manifests


There are going to be some very happy Corvette owners next week! If one of these is yours, let us know in the comments below!

To find the shipping status of your 2020 Corvette, go to https://www.palsapp.com/, then click on the search icon on the top right of the page (looks like a magnifying glass). Enter your VIN and click the search icon to the right of the input field.


Source:
MidEngineCorvetteForum.com


General Motors, Honda Producing 12,000 Gallons Of Hand Sanitizer

Sponsored Links

General Motors and Honda have announced they will produce around 12,000 gallons of hand sanitizer that will be provided to workers at their respective production facilities.

The hand sanitizer is being produced by both companies through their joint Fuel Cell System Manufacturing (FCSM) partnership. The hand sanitizer is being made at the Brownstown, Michigan facility where the GM-Honda FCSM team has been working on to develop fuel-cell fuel stacks for the next generation of hydrogen-powered road cars. Honda says the sanitizer is made using an “apparatus designed to manufacture the electrodes used in the fuel cells,” that was repurposed.

“It is inspiring to see how the automotive industry continues to find new and innovative ways to help society during this crisis,” said Honda North America general counsel Cathy McEvilly. “The commitment shown by Honda associates and their counterparts at GM is a source of pride to us and we are happy to provide something to help the brave health care professionals fighting this pandemic every day.”

Honda also said it will donate 75 percent of the hand sanitizer to healthcare facilities and other places that may be in need of it and will keep 25 percent for Honda North America workers. It has already sent some bottles of the sanitizer to ProMedica Toledo Hospital in Toledo, Ohio, Memorial Health in Marysville, Ohio, and the DMC Children’s Hospital of Michigan in Detroit, Michigan.

GM and Honda formed the FCSM partnership back in 2013 and, more recently, announced a collaboration on electric vehicles as well. Under the new EV partnership, Honda will use GM’s new BEV3 electric vehicle platform an Ultium battery technology in its future line of EVs and will also incorporate other GM technology such as OnStar and Super Cruise.

“This collaboration will put together the strength of both companies, while combined scale and manufacturing efficiencies will ultimately provide greater value to customers,”  executive vice president of American Honda, Rick Schostek, said in a statement previously.

Subscribe to GM Authority for Honda-related GM newsGM-related COVID-19 news and ongoing GM news coverage.

 SAM MCEACHERN for GM Authority


REPORT: C8 Corvette Ranks 8th on 2020’s Most American Made Cars Index

The mid-engine C8 Corvette’s clean-sheet redesign resulted in just a couple of parts carried over from the C7 generation, but there is enough “baseball and apple pie” in the sports car to keep it in the Top 10 of the 2020 American Made Index as compiled by Cars.com.

Chevrolet landed two vehicles on the 2020 List with the Corvette coming in at a very appropriate 8th place and it was joined by the Colorado that landed in 10th place. They were the only two GM vehicles to make the list.

The American Made Index, or AMI, “is an independent annual list that ranks the new vehicles that contribute most to the U.S. economy based on criteria ranging from U.S. factory jobs and manufacturing plants to parts sourcing.” Manufacturers are required by law to annually report the percentage of US and Canadian parts and that information appears on the window sticker of all new vehicles sold in the USA.

The AMI studied 91 vehicles and the ranking looks at four key factors:

  1. Origins of the engine and transmission
  2. Origin of parts in the car (as reported by the American Automobile Labeling Act)
  3. Final assembly location
  4. U.S. manufacturing workforce relative to production footprint

The were some new additions to the list for 2020 with the Ford Ranger leap-frogging the Jeep Cherokee to #1 while Tesla landed three vehicles on the list.

2020 American Made Index by Cars.com

Cars.com says that 70% of shoppers consider a car’s impact on the US economy a significant or deciding factor in their vehicle choice and the COVID-19 pandemic has increased the desire of Americans to “buy local.” The survey found that nearly 40% of consumers report they are more likely to buy an American-made car due to the current health and economic crisis, while just 4% said they were less likely. A whopping 26% said it was “unpatriotic” to buy a non-American-made car, compared to just 18% in 2019.

“This marks the 15th year we have released the American-Made Index, and for the first time, we are ranking a full, comprehensive list of qualifying American-made cars available in the U.S. Of some 350 cars on the market for 2020, 91 models qualified for our index,” said Kelsey Mays, Cars.com’s senior consumer affairs and vehicle evaluations editor. “The auto industry is highly globalized, but these 91 models bring jobs to America and investments to our local communities — a growing concern for Americans in the current climate.”

You see find reviews of the Top 10 American Made Vehicles at Cars.com as well as view several videos that discuss the 2020 American Made Index.
Source:
Cars.com


Composites-intensive masterwork: 2020 Corvette, Part 1

Eighth-generation vehicle sports more composites, and features parts produced using unique materials and processes.
#weaving #discontinuousfiber #outofautoclave

here and in Part 2 next month.

composites in mid-engine Corvette

here and in Part 2 next month.

New engine configuration changes everything

GM engineering went into preliminary design knowing they’d be working on a mid-engine vehicle — the first production Corvette in eight generations to sport that configuration. “We evolved the front-engine architecture as far as we could for performance, so shifting to a mid-engine design was the next logical step to improve an already great car and be the segment leader,” explains GM’s Tadge Juechter, executive chief engineer-Global Corvette. Equipped with the Z51 performance package, the 2020 Corvette Stingray can accelerate 0-60 mph (0-97 kmh) in 2.9 seconds and reach top speeds of 194 mph (312 kmh). Pushing the engine toward the vehicle’s rear affected many things, including the car’s center of gravity, the relative position of occupants, transmission location and design of underbody panels and trunk storage. The mid-engine design also introduced higher operating temperatures and noise to new areas of the car.

All eight generations of the Chevrolet Corvette

The eighth-generation Chevrolet Corvette — all eight generations (C1-C8) shown above, left to right respectively — from General Motors Co. started production earlier this year. This mid-engine sports car is not only impressively fast, and the most composites-intensive Corvette yet, but it features an array of genuinely innovative composites applications. Source | General Motors Co.

“Because of the mid-engine, we had to do things differently,” explains Ed Moss, Corvette body structure engineering group manager. “From the start, we had so many discussions about how to lay out the body structure. At one point, everything was on the table as we discussed the best way to design and build each system. For example, we debated metallic versus composite for wheelhouses. If we’d kept the C7’s composite wheelhouses, we’d have to bond to the hinge pillar [A pillar], which is immediately adjacent to the front wheel in a mid-engine vehicle, leaving very little package space. We went with metal there. We even briefly discussed metal versus composite body panels. However, it would’ve been economically infeasible to create the C8’s styling lines in metallics.”

“A real challenge we faced was how to handle air induction,” recalls Chris Basela, Corvette body structure lead engineer, explaining the need for a different method to funnel cooling air into and across the naturally aspirated, 495-horsepower, 6.2-liter V8 engine, which generates 470 foot-pounds (637 Newton-meters) of torque. “We tried all kinds of designs that forced air to take really torturous paths, creating eddies and flows we didn’t want. It took lots of iterative work with the powertrain team to develop the best path for airflow because the car needs to breathe freely with no restriction. We also needed access to the air box and had to work around rear trunk space. Another issue was heat and engine noise in the passenger compartment, because occupants no longer sit behind the engine but are positioned directly in front of it. And we were especially conscious of cabin air quality as laws had changed in Europe and elsewhere since the C7, so we worked really hard to reduce VOCs [volatile organic compounds].”

“Even working out how to assemble the car was a challenge,” adds Moss. “With a front-engine design, you have a long hood and large engine compartment, providing operators plenty of room to build the car from inside the compartment, even with the front bumper beam already welded on. On the mid-engine Corvette, with its very short front clip, we keep the front of the car open as the vehicle is built out, then bolt on the front bumper.”

“It was quite a balancing act to get the proper shapes, while ensuring our suppliers could produce the parts and our team in Bowling Green [GM’s Kentucky-based Corvette assembly plant] could assemble them,” continues Basela. “In the end, there was only one carryover composite from the C7’s body to the C8.” This was tough Class A, 1.2 specific gravity (SG) sheet molding compound (SMC) developed for the 2016 Corvette and used in a variety of exterior closures on the new vehicle.

Vehicle architecture

For four generations (C5-C8), Corvettes have featured a three-layer, multi-material body structure: the frame, usually a mix of aluminum or steel — this time with a carbon fiber-reinforced composite (CFRP) part; the body structure, which is largely bonded composite to capitalize on design and manufacturing flexibility; plus bolt-on closeouts (body panels), which have been composite since Covette’s June 1953 debut. This layered hybrid structure not only provides affordable lightweighting in high production volumes — particularly for cars of this performance class — but also permits multiple vehicle variants to be produced at low tooling investment. In fact, for the current C8, GM managed to produce all Class A composite body panels (bonded inners and outers) on both the base model coupé and convertible using just 20 tools.

GM and its suppliers have already won many awards for innovative composites use on the 2020 Corvette Stingray. Among those standing above are key GM engineering team members at last November’s 49th annual Automotive Innovation Awards Gala, where GM won SPE Automotive Div.’s Vehicle Engineering Team Award. A number of composite parts on the vehicle also were finalists or category winners at the event. Source | SPE Automotive  Div.

In addition, Corvettes have always been engineered with an open-roof architecture, regardless of whether they are actually convertibles or coupés with fixed or removable roof panels. Because open-roof vehicles are generally less stiff than those with fixed roofs, an important focus for each Corvette’s engineering is always to create the stiffest foundation possible to improve suspension and steering. Historically, tunnels(housing transmissions and driveshafts on front-engine vehicles) have dominated Corvette body structures and have been key enablers for achieving high torsional rigidity. In the case of the new Corvette, GM achieved even higher rigidity. With the roof removed, the C8 body is 53.78% stiffer than a benchmark high-performance mid-engine competitor, 29.27% stiffer than a second high-performance mid-engine competitor, and 13.79% stiffer than the C7. Two composite parts made important contributions to vehicle stiffness—one directly attached to the frame structure (rear bumper beam) and another attached to the underbody (lower tunnel closeout).

Frame structure

The C8’s frame is largely aluminum alloy with one CFRP part developed to meet GM’s stringent dollar-per-kilogram targets. In contrast, the C7 frame was all-aluminum and the C6 was mostly steel.

The only composite part directly mounted to the frame that travels with the body-in-white (BIW) through the electrophoretic rust-coat process (which GM calls ELPO), is a unique CFRP rear bumper beam. This part helps stiffen the frame and contributes to rear-impact performance. Its curved shape — possible thanks to a novel process called radius pultrusion developed by Thomas GmbH + Co. Technik + Innovation KG (TTI, Bremervörde, Germany) — enables it to match rear styling cues and fit in limited package space while maintaining dimensional integrity close to engine-bay heat. As the auto industry’s first curved pultruded part (see our full feature on this part in the CW May 2020 issue), the hollow, two-chambered beam was produced by Shape Corp. (Grand Haven, Mich., U.S.) on equipment developed and built by TTI. The beam weighs just 1.3 kilograms and features a bonded/bolted tow-hook eye capable of 25 kilonewtons of pull-out force.

An auto industry first, the 2020 Corvette sports a curved rear bumper beam in pultruded carbon fiber composite produced with 87 individual carbon tows and eight carbon fiber non-crimp fabrics (NCFs) impregnated with polyurethane-acrylate resin. The hollow, two-chambered beam is 66% lighter than the outgoing aluminum beam and met GM’s demanding dollar-per-kilogram targets. Source | Shape Corp.

Body Structure: part A

Virtually all of the C8’s body structure components are composite and are bonded and/or bolted to the frame after the latter undergoes ELPO. Notable composite parts at this level include structural underbody closures and the floor — which we’ll cover in this issue — and front and rear trunks, induction ducts and the rear surround and bulkhead — which we’ll cover, along with body panels and trim, next month.

This hybrid-composite, lower-tunnel closeout is produced using a variant of liquid compression molding. It eliminated secondary attachments, lowered mass by 3 kilograms and reduced labor, tooling and capital costs vs. aluminum. Source | SPE Automotive Div.

The removable lower-tunnel structural closeout on the C8, which acts as an access door, contributes more than 10% of the vehicle’s torsional rigidity and acts as a primary load path during a crash. This hybrid-composite panel consists of three layers of glass fiber preform. These consist of continuous/woven and chopped/random fibers at 38% fiber volume fraction (FVF), with veils added to top and bottom face layers on each stack for improved surface finish. Glass preforms are interleaved with two layers of preforms made using Toray (Tokyo, Japan) T700 12K standard-modulus carbon fiber in the form of NCF biaxial fabric at 21% FVF and a vinyl ester (VE) matrix. The closeout is produced by Molded Fiber Glass Co. (MFG, Ashtabula, Ohio, U.S.) using its proprietary PRiME (Prepositioned Reinforcement ensuring Manufacturing Excellence) process, a type of liquid compression molding (LCM).

Aside from a single aluminum closeout near the rear wheels that is part of the engine cradle, the remaining underbody panels consist of either compression molded SMC or injection molded thermoplastics. Among other benefits, these panels reduce underbody turbulence and drag, improve fuel efficiency and keep moisture, dust and stones out of the vehicle’s engine and driveline. Further, they provide the dimensional foundation for multiple exterior and interior interfaces.

The low-density but structural SMC panels feature new formulations (in this case, 40% FVF chopped fiberglass/unsaturated polyester (UP) resin) developed by MFG. The material is called “float” SMC because each panel’s density is less than 1.0 (average SG=0.97) and thus can float in water. MFG produced all structural SMC and LCM’d parts on the car.

An important contributor to vehicle lightweighting on the C8 is the extensive use of “float” SMC. With specific gravity values less than 1.0, this low-density but structural SMC developed by MFG is used in a variety of non-Class A parts, including underbody panels, the dash panel, air-induction ductwork and the front trunk. Source | Molded Fiber Glass Co.

The vehicle also sports a hybrid floor optimized for torsional bending and side-pole impact protection (engaging the rocker panels and tunnel, to which it is joined). Floor panels feature cabin-facing stamped aluminum bonded to sheets of road-facing 1.5-SG composite (60 wt-% continuous and woven glass fiber/VE) produced via the PRiME process. Before heat-bonding both layers with Pliogrip 9100 polyurethane structural adhesive from Ashland Global Holdings Inc. (Wilmington, Del., U.S.), MFG cleans and preps the materials.

All composite parts directly bonded to the C8 frame are first subjected to laser ablation, a process developed by GM, MFG and Adapt Laser Systems LLC (Kansas City, Mo., U.S.) for the 2016 Corvette, and adapted from a composites industry method for mold cleaning. Laser ablation replaces hand sanding and reduces labor, time and cost, eliminates dust and improves repeatability. Laser path, angle of attack and energy level are customizable for each part’s material and geometry. To maximize manufacturing flexibility, the entire underbody, including the floor, is connected to the frame and itself via bonding and screws.

In the August issue of CW, we’ll continue covering composites innovation on the new Corvette, resuming with additional components at the body structures level and finishing with exterior closures (body panels), plus additional trim and upgrades.

Peggy Malnati for Composites World


How The Corvette Will Evolve Over The Next Five Years

The future of the mid-engine Corvette should be long and very fast.

Future variations of the new-generation Chevrolet Corvette have been the cause of much debate over the past year. Hagerty recently claimed that it has the scoop, via an “industry leak” on the roadmap for the Corvette’s’ development in trim and model variations. Between that and a lot of industry chatter and some leaks, we’re sure that the Corvette is not only going to evolve over the coming years but mutate into something incredibly special. Here’s how the future lineup of the Corvette should shape up.

2021 C8 Corvette Stingray

The first iteration of the new Corvette is on the road, although in limited supply due to the pandemic. It comes with an LT2 6.2-liter naturally aspirated V8, making 490-495 hp and 465-470 lb-ft depending on trim level. There’s no manual option, and power is controlled and delivered to the rear wheels by a Tremec supplied 8-speed automatic transmission.

Only 2,700 C8 Corvettes were built before the virus struck, then production had to be paused. The years given below are the planned model years. However, development programs throughout GM have been paused, and there could be significant delays.

2022 C8 Corvette Z06

The Z06 badge means added performance, and initial reports claimed the first heated up C8 Corvette would arrive with 650 hp and 600 lb-ft from a 5.5-liter LT6 V8. The race-inspired LT6 engine is set to have a flat-plane crank design that’s rumored to rev past 8,000 rpm. Since then, though, credible sources have reset expectations at 600 hp and 470-500 lb-ft of torque, but will, indeed, rev fast and long. The Z06 will also have a wider body to accommodate larger brakes inside the larger wheels and tires, as well as a more aggressive suspension setup. There’s also reports that an optional aero package will include a unique rear wing.

2023 C8 Corvette E-Ray

Some enthusiasts aren’t going to like this, but the Corvette is going to go hybrid in the 2023 model year. It will use the same 6.2-liter LT2 V8 as the Corvette Stingray, but it’ll be bolstered with an electric motor located between the front wheels. The 1.94-kWh lithium-ion battery pack will be located in the middle of the car, and the electrical system’s peak output will be 85 kW. Total output should sit at around 600 hp and 575 ft-lb of torque – around the same as the Z06 model. Unlike the Z06, the E-Ray isn’t expected to have the widebody setup and will be the first-ever all-wheel-drive Corvette.

2023 C8 Corvette Grand Sport

There are conflicting reports on this one with some claiming the Grand Sport will be the hybrid model, and others suggesting that the Grand Sport will be powered by the Stingray’s 6.2L LT2 V8, but with the chassis and aerodynamic enhancements from the Z06. Using the base model V8 and upgrading the chassis is the traditional recipe for the Grand Sport. We’re trying to verify either way, but we currently suspect the Grand Sport will be the name of the hybrid model.

2024 C8 Corvette ZR1

The ZR1 has traditionally been the flagship Corvette, cranked up then honed to hunt down supercars at the track. The ZR1 will come with a twin-turbo variant of the flat plane crank 5.5L V8 LT6 engine making a fearsome 850 hp and 825 lb-ft of torque. For reference, the C7 generation ZR1 made 755 hp and 715-lb-ft of torque and that was frightening enough for the uninitiated.

The C8 generation Corvette ZR1 promises to be the fastest Corvette yet, and that’s before adding the upgraded chassis with track-oriented suspension, brakes, and active aero. However, in 2025 something even faster should arrive.

2025 C8 Corvette Zora

The Corvette Zora is named after Zora Arkus-Duntov, the man who turned the Corvette into a serious performance car but didn’t live long enough to see his dream of a mid-engined version come true. Fittingly, the fastest Corvette in its history will have his name on it, and use the twin-turbo 5.5L LT7 V8 from the ZR1 paired with a hybrid-electric system. Total power output is set to be astounding at around 1,000 hp and 900-1000 lb-ft of torque. It’ll be all-wheel-drive, wide-bodied, track-ready, and feature active aerodynamics. It will also put to bed any argument of whether the Corvette is a supercar or not.


Watch A Corvette C8 Hunt Down A Dodge Viper ACR

It seems comfortable at the limit.

The C8 Corvette is Chevrolet’s first stab at building a true mid-engine supercar. While much faster versions will follow, the C8 Stingray in base form can hold its own against more exotic and more powerful machinery. We recently wrote about a C8 Stingray demolishing the quarter-mile, but now we shift our focus to the Laguna Seca Raceway, where a C8 goes up against one of the meanest American performance cars out there: the Dodge Viper ACR.

The C8 is clearly at home on a track as we can see in the video. This Torch Red Corvette gets pushed to its limits and comes out as an unexpected hero.

The 2020 C8 Chevrolet Corvette is no wimp when it comes to numbers: powered by a naturally aspirated 6.2-liter V8, this car produces 490 horsepower and 470 lb-ft of torque. That’s enough to launch it to sixty in only 2.9 seconds when fitted with the Z51 package. This translates into a car that is deceptively fast, especially when compared to big dogs such as the Viper ACR.

In the video, we can see the Vette slowly warming up to the track conditions, with that naturally-aspirated engine filling the cabin with the best noise you could imagine. It is clear that the driver is trying to find his comfort zone.

Side View
Top View
Engine Bay
Exhaust

After a short sprint, the driver and car seem to be clicking, and the pace increases. In the distance, you can see some cars getting closer and closer: it turns out that it’s a Porsche 911 GT3. The action starts at around the 3:15 mark, but you’ll have to wait until the 6:40 mark to see the battle between the Viper and C8.

We have no doubt that in the hands of an experienced driver the Viper would be the faster car, but getting the most out of the downforce capability of this car takes a serious driver and it’ss clear to see that the C8 Corvette is an easier car to drive at the limit. If this is what the Stingray is capable of, we can’t wait to see what faster versions will do.

Michael Butler for CarBuzz


See Hennessey’s Chevy Corvette C8 Drag Race Bone Stock C7

Its’s not a fair race to begin with, but at least they’re both painted white.

It’s no secret that Hennessey Performance is working on the 2020 Chevrolet Corvette C8 by giving it a twin-turbo conversion. We’ve heard it roar in its initial stage before, plus it has hit the dyno in a previous video as well, but we have yet to see it in action again. We’re guessing that Hennessey is still wrapping up its development.

What we see from the Texas-based tuner, however, is its slightly tuned mid-engine ‘Vette. Fitted with stainless steel exhaust, lightweight wheels, and Hoosier race tires, we’ve seen the white C8 drag race several cars before, including a Huracan and a Mustang Shelby GT500.

Gallery: C8 Corvette Dyno At Hennessey

2020 Chevrolet Corvette Dyno Hennessey

Now, Hennessey pits the altered C8 versus a bone-stock Corvette C7. We’re not really sure what the purpose of this head-to-head comparison is because it has already been decided right before it even started. Plus, the C8 has performance upgrades, albeit not much, on its employ but still, we wouldn’t say that this is an apple-to-apple comparison.

But then again, a stock C8 and C7 comparison isn’t fair either. On paper alone, the C8 has the major advantage in terms of total output, with the latest model producing 490 horsepower (365 kilowatts) – a quite massive update from the former’s 455 hp (339 kW). The C8 also gets a better 8-speed dual-clutch transmission.

Jacob Oliva for Motor1


2020 C8 Corvette Production Rolling Without Incident

With constrained production, these cars are instant modern collectibles.


General Motors has a lot of orders to fulfill for the 2020 C8 Corvette and the Corvette Assembly plant in Bowling Green, Kentucky is finally getting back to production. Originally, the factory was idled and employees furloughed back on March 20, a move that GM painted as lasting for only two weeks. Here we are a little over two months later with few C8 Corvettes made, guaranteeing the 2020 model year is an instant collectible due to small production numbers.

2020 C8 Corvette Production Rolling Without Incident

The so-called “COVID Corvettes” are about to increase in number, but don’t expect anything dramatic. This week only 550 of the 1,200 workers for the Corvette Assembly plant have returned to the production line.

Those workers are having to wear protective equipment like masks and deal with revised procedures designed to maximize sanitary conditions on the assembly line. However, all those changes will slow the production process down significantly.

2020 C8 Corvette Production Rolling Without Incident

On top of that, reports claim at least 230 C8 current builds were set aside unfinished when the factory was idled. Each car was wrapped tightly in plastic to avoid dust and other debris, so that must be removed, the Corvettes moved to their appropriate places in the production line, and the assembly process finished for each one. Some are speculating this could take several weeks.

Thanks to many suppliers for Corvette Assembly having closed as well, there aren’t enough parts to bring on the rest of the assembly line workers. Those who are going to work have been selected by seniority. They must answer a series of questions about coronavirus symptoms before entering the factory floor. In addition, each worker’s temperature is taken.

2020 C8 Corvette Production Rolling Without Incident

GM hasn’t provided any official word on how many 2020 Chevrolet Corvettes will be made. Unofficial estimates peg it at a small fraction of the normal production levels, meaning many who ordered a C8 will have to wait until 2021 to get one. The lucky few who do get a 2020 model are sitting on a rare COVID Corvette that’s a part of history at this point.

Source: WKU


2022 Chevrolet Corvette Z06

What We Know So Far

2022 chevrolet corvette z06 artist's rendering
STARTING AT $85,000 EST.

Overview

Now that the bubble of anticipation surrounding the mid-engine Corvette has burst, excitement is building for the even-mightier Z06 model. With an exotic flat-plane-crank V-8 engine, the 2022 Chevy Corvette Z06 will sound unlike any Vette that’s come before. It’ll also look meaner than the mainstream C8 thanks to flared fenders, larger air scoops, and aerodynamic addendum that actively adjusts to maximize high-speed downforce and cornering traction. Along with its exclusive powertrain and enhanced appearance, the super Chevy will inherit all the best features and technology from the regular model. Although we still don’t have all the juicy details about the new Z06, here’s what we know so far.

What’s New for 2022?

The first mid-engine Corvette Z06 is expected to go on sale in early 2021 as a 2022 model. As is tradition, it’s a more hardcore, track-focused version of the standard Vette, complete with bolder styling cues and serious performance attributes.

Pricing and Which One to Buy

  • Z06: $85,000 (est.)

It should make sense that, since Chevy hasn’t officially revealed the new Corvette Z06, we can only speculate on how much it’ll cost. Its front-engine predecessor started at about $25,000 more than the base model, so we think it’s safe to add that number to the starting price of the 2020 Corvette, which starts at $59,995. That means the 2022 Z06 should open at around $85,000 when it eventually goes on sale.

Engine, Transmission, and Performance

The upcoming Corvette Z06 will receive a special engine that should make it sound similar to the supercars it’s trying to dethrone. The naturally aspirated 5.5-liter V-8 features a flat-plane crank, which means it should rev to between 8500 and 9000 rpm. This engine is expected to make over 600 horsepower, and it’s Ferrari-like howl is all but guaranteed to send shivers down the spine of bystanders. The unconventional V-8 will hook up to an eight-speed dual-clutch automatic transmission and rear-wheel drive. Considering that the 495-hp 2020 Corvette Z51 we tested rocketed from zero to 60 mph in just 2.8 seconds and completed the standing quarter-mile in 11.2 seconds at 122 mph, the Z06 will be even quicker in a straight line. A set of wider, stickier tires and more powerful brakes will help it corner harder and stop shorter than the regular Vette, too. Chevy will also strengthen the structure and recalibrate the suspension tune on the Z06 to help make sure its performance advantages are most obvious at the racetrack. A host of active aerodynamics that automatically adjust to optimize downforce will join the party for this new generation. We’ll have to wait until we get our hands on one to evaluate how its myriad improvements compare with the outgoing Corvette Z06.

Fuel Economy and Real-World MPG

Neither Chevy nor the EPA have indicated how efficient—or inefficient—the 2022 Corvette Z06 will be in the city and on the highway. Since the company’s flat-plane-crank V-8 is currently only found in the Corvette C8.R race car, we don’t have any government ratings for comparison. Once the Z06’s fuel-economy figures are released, and we have the opportunity to test one on our 75-mph highway route, we can evaluate its real-world mpg.

Interior, Comfort, and Cargo

The Bow Tie brand went above and beyond to ensure that the mid-engine Corvette’s interior could not be called boring. While the design certainly transcends what’s found on every other Chevy model, the square steering wheel and wall of climate-control buttons on the center console are unusual elements, to say the least. Still, the cabin layout caters to the driver, and the list of standard and optional features is extensive. This includes a 12.0-inch fully digital gauge cluster, a head-up display, heated and ventilated seats, and wireless charging. All of this and more will continue inside the new Z06. We expect its track-worthiness to be made apparent through additional carbon-fiber and microsuede interior accents as well as a set of even more aggressively bolstered seats. The Corvette’s capacious rear trunk should continue to provide a spot for drivers to carry two sets of golf clubs.

Infotainment and Connectivity

Cooked into the Corvette’s multilayered dashboard is an 8.0-inch touchscreen that supports Chevy’s Infotainment 3 Plus system. While we’ve only had minimal exposure to this specific setup, we found it to be mostly intuitive and responsive. We’re confident the Z06 will share the same interface and features, which include Apple CarPlay, Android Auto, and a Wi-Fi hotspot. Likewise, two separate Bose stereos are expected to be offered: a standard 10-speaker system and an optional 14-speaker setup. The new Z06 will continue to offer the Performance Data Recorder, which allows you to record video of everything from your track exploits to relaxed country-road cruises. And if you dare leave your Z06 with a valet, there’s a setting that keeps track of any nefarious activities the car-parker might try.

Safety and Driver-Assistance Features

The 2022 Corvette Z06 hasn’t been crash tested by the National Highway Traffic Safety Administration (NHTSA) or the Insurance Institute for Highway Safety (IIHS). While the regular C8 Corvette only has a handful a driver-assistance technology, such as blind-spot monitoring and rear cross-traffic alert, we expect those features to be available on the Z06.

Warranty and Maintenance Coverage

Chevy provides all of its models with a middle-of-the-road limited and powertrain warranty. While the company offers more complimentary maintenance than automakers who skip the free service altogether, it’s one of the shortest such plans in the industry.

  • Limited warranty covers three years or 36,000 miles
  • Powertrain warranty covers five years or 60,000 miles
  • Complimentary maintenance is covered for the first visit

Everything You’ve Ever Wanted To Know About Hot Wheels (But Never Asked)

Many gearheads have a strange affinity to Hot Wheels. Here is everything you’ve ever wanted to know about the company, but never asked.

Toy cars can be divided into two categories: Hot Wheels and everybody else. For over 50 years, Mattel has dominated with what is now recognized as the best-selling toy in the world. It’s impossible to count how many car buffs, from mechanics to real race stars to TV personalities, grew up playing with these cars. Whether it was just a few models or massive collections, Hot Wheels has been part of car culture for decades and is never going to stop. Whether it’s a simple model or some fancy licensed vehicle, Hot Wheels simply enthralls.

Yet it’s incredible how some people are unaware of the facts of the company and its history. From its unique origins to how these cars are put together, the story behind Hot Wheels is fascinating. There are also touches from how some of these cars are more expensive than real ones to some unique touches on the culture. Here are 20 amazing facts about Hot Wheels to prove they’re more than just “kids toys.”‘

20/20 Real-Life Hot Wheels Jump Was A World Record

Growing up a massive Hot Wheels fan, racer Tanner Foust decided to honor them in a fun way. At the 2011 Indy 500, Foust talked the management into seeing up a massive orange ramp and raced down it in a rally car.

After 90 feet of track, Foust sailed 332 feet, the longest record for such a move. He topped it by driving through a 66-foot loop in 2012 to live out the dreams of every kid.

19 Technology In Car Building Is Amazing…

Making toys has become a very high-tech business today. Just like real car companies, Hot Wheels has adapted to the 21st century nicely. Computers and 3-D technology are utilized to make sure the designs are perfected before the building begins.

It also helps them keep on top of the latest car trends to ensure that today’s Hot Wheels are sleeker and more natural than the ones of the past.

18 But They’re Still Diecast

There are many toy car lines out there, but Hot Wheels is still the king of the bunch. The key reason is that, for all the advances in technology, every car is still diecast and built mostly by hand.

Even when cheaper materials are available, Mattel knows the diecast is what the fans want. It’s also helped in making customized cars at home for popular models. After 50 years, Mattel doesn’t want to mess with success and do away with diecast.

17 They’ve Worked With NASA

Hot Wheels have done a few astronaut-themed toys over the years. But that’s not the only connection they have with NASA. In 1998, they were able to work with the agency to create an exact replica of the Mars Rover, which landed on the Red Planet that very year.

They also worked with them in 2012 for scale models of the Curiosity rover. It’s amazing how the company got access to top-secret plans to make these toys.

16 Collectors Take It Seriously

Some may dismiss Hot Wheels as “just for kids.” But collectors take it more seriously than real automobiles. The 1969 Volkswagen Beach Bomb (only 16 prototypes were made) is known to go for at least $15,000.

Some rare models can go for a hundred grand, and collectors are always on the lookout for unique mint models. Entire museums are devoted to various cars as some Hot Wheels collections put legit car collectors to shame.

15 Scaling Down The Cars Was Tricky

A key to the company’s success is that they work with scores of real car companies to get looks at plans for their toy models. Yet it’s not so simple as just “make a smaller version.” The biggest challenge is to achieve the proper scale for the toys in a diecast model yet retain the details of the actual car.

That can be complex with some fancy vehicles. That every model has to be sized to fit the same tracks just adds to why it takes as long developing a toy car as a real one.

14 NASCAR Star Has The Record For The Longest Track

Ever since the Hot Wheels tracks were created, fans have been trying to top themselves making the most extended and most complex. A few have achieved great ones, but it’s fitting a NASCAR star holds the record for the longest.

In 2019, Joey Logano unveiled a 1,941-foot long track stretched across his garage. It weaves through his car collection with 1222 boosters before ending in Logano’s own 2018 HW Ford Mustang. Add yet another title to Logano’s list of accolades.

13 They Made A Car Coated In Diamonds

In 2008, Mattel made a big deal of celebrating the 40th anniversary of the Hot Wheels line. As a special reward, Mattel had Jasons of Beverly Hills craft the most expensive Hot Wheels car on the planet.

Cast in 18-karat gold, it’s covered with 2700 diamonds and gems totaling nearly $150,000 today. It’s become a rotating exhibit at toy museums for the glitziest Hot Wheels you could see.

12 The Darth Car Is A Speed Machine

While they do stick to toys, the company has been busy creating some real-sized cars for collectors. One of the most notable is based on Darth Vader, with the hood looking like his fearsome helmet and in jet black.

This isn’t just for show as it’s based on a C5 Corvette with a GM LS3 V-8 engine capable of 526 hp and 150 mph. The Dark Lord of the Sith would be proud of this powerful craft.

11 Every Car Is Tested To Make Sure It Can Run A Track

Almost from the beginning, Hot Wheels car fans had to have a track with the cars. They’ve gone from straight lines to elaborate roller-coaster-like loop systems to leave kids entertained for hours.

What few realize is that the track determines if a car makes it as Mattel prides itself on “every car can fit every track.” More than once, a prototype has to be altered when it won’t fit as the track decides a car’s final form.

10 There Are More Hot Wheels Cars Than Real Cars

While it’s tricky to figure out for sure, most sources agree there are at least one billion cars on the planet (give or take a few hundred thousand in auto graveyards). In contrast, since 1968, six billion Hot Wheels cars have been created.

True, many have been trashed and/or recycled, and it’s impossible to count how many have been lost in backyards. But given how 16 cars are produced every second, it’s no shock the toys outnumber the real deals.

9 Several Creators Are Legit Car Designers

The one constant of Hot Wheels is that the cars look just as good as the real deal. There’s an excellent reason for that as scores of the manufacturers are legitimate car designers. Larry Wood was a veteran of Ford before becoming one of the first Hot Wheels designers.

He’s not alone as Jack Ryan was a rocket designer who crafted the bearings that made the cars so great. Scores of the car designers were in real automobiles first, so it’s no wonder the vehicles look so good.

8 The Original Camaro Is Worth A Fortune

Mint conditions of the Original 16 Hot Wheels releases are all pretty collectible items. But one dominates from the pack. While versions of a Camaro were produced, a few had white enamel paint.

They had been meant to discover flaws in a prototype but accidentally released. A mint version of one went for a hundred thousand dollars and made this one of the most expensive toys on the planet

7 They Released A Custom Corvette Before GM Did

An early standout for the company at a custom Corvette in 1968. What made it notable was that the toy was released before GM had their actual Corvette in car dealerships.

The fact designer Harry Bradley had worked at GM indicates he may have “borrowed” the designs before he left to allow Mattel to beat GM to releasing a Corvette to the masses.

6 The Red Stripes Are Expensive

If you find what looks like an old Hot Wheels car, take a good look at the wheels. If they have red stripes, then you’ve just found a fantastic collector’s item. From 1968 to 1977, designers hand-painted red lines onto the wheels to make the cars look distinctive.

As a cost-cutting measure, they switched to all-black wheels in 1978. Some mint condition red-striped vehicles have been known to go for thousands online.

5 One Of The Original Cars Was Based On A Car With No Doors

The first wave of Hot Wheels was just 16 cars, and any of them can be valuable today. One is notable, the 1965 Dodge Deora. This car boasted no doors but rather a hatch for folks to crawl into.

It was based on a fun design used by Mike and Larry Alexander but in an irony, no real Dodge Deoras were built, to make this a truly unique model

4 A Tie-In Cartoon Got Pulled By The FCC

Today, cartoons based on toy lines are commonplace. But in 1969, Hot Wheels got in trouble when they put out a cartoon series about some teenage car drivers. Despite good messages, the show was hit by complaints about being a “half-hour commercial.”

The FCC agreed, and it was yanked off the air. The company was just ahead of their time with a cartoon tie-in for a hit toy line.

3 There’s A Fight On Where The Name Came From

Much of Hot Wheels is shrouded in myth, and that includes just where the name comes from. The familiar story is that when Eliot Handler saw the first models from designer Fred Adickes, he remarked: “those are some hot wheels you’ve got there.”

Another version is that Handler just blurted the name out in a meeting with a designer. Regardless, it just stuck to become one of the most popular toys on the planet.

2 They’re Number One…Because They Remain So Cheap

In the ranks of the most popular toys on the planet, Hot Wheels dominates. They’re not just the biggest toy vehicle sellers but also the number one selling toy in the entire world. The reason is that in many markets, the cars can still go for only a dollar each.

True, they can be put out in packs, and some nations charging a few bucks more. But many stores do sell the cars for less than a bottle of water, which is the reason they are so dominant.

1 Its Creator Was Married To Barbie’s Creator

Elliott and Ruth Handler were the First Couple of the toy world. The two had founded Mattel as a picture frame company in 1945. While making a dollhouse, Ruth decided to craft a series of dolls she named Barbie.

It was an instant hit to make Mattel a success. Elliott then realized how a toy car line could be great for boys to craft what would become Hot Wheels. The two remained together until Ruth’s death in 2002 (Elliott passed on nine years later) to be icons of their industry.

Sources: Mentalfloss.com, hotwheels.com, hotwheelsmedia.com, thrillist.com


Watch a Track-Day Comparison Between the Shelby GT500 and C8 Corvette

Both cars retail for about $81,000, but one is a lot more accessible.

SPEED PHENOM ON YOUTUBE

If you’ve got $80,000 to spend and want an American high-performance car, now’s a pretty good time to be in the market. In addition to tire-shredding stalwarts like the Camaro ZL1 and Challenger Hellcat, Ford and Chevy have recently launched high-profile, track-ready sports cars. And thanks to a new video by Speed Phenom, we now know how they directly compare on track.

Naturally, we wanted to do this comparison ourselves. But the GT500 wasn’t ready during our Performance Car of the Year competition when we had an early C8 to test. And now that both cars are on sale, stay-at-home orders and track closures mean we’ll have to wait for an opportunity to do a full R&T comparison.

In the meantime, Speed Phenom does a good job of breaking down how they perform. With the caveat that he’s got a base model GT500 without the optional Pilot Sport Cup 2 tires, he notes that the car struggles for grip more often than the similarly-tired Corvette. It’s also less composed through mid-corner bumps, with slower cornering all around. Thanks to its massive horsepower advantage, though, it jets through straightaways.

The C8, meanwhile, benefits from serious mechanical grip. The better-balanced midship car fires through corners and has no problem putting its power down. That makes it more approachable, not surprising given that it’s the tamest version of the C8 while the GT500 is stretching the limits of the S550 platform. We’re sure to see more track-ready Corvettes soon, but for now the Stingray is a surprisingly capable start.

Mack Hogan- Road&Track


1977 Chevrolet Corvette IMSA “SuperVette” race car for sale

Some fans complain that race cars don’t have much in common with road vehicles, but that wasn’t a priority in the 1970s. Loose regulations in the period allowed teams to erase nearly all road-car DNA as they searched for greater performance. This 1977 Chevrolet Corvette, dubbed the “SuperVette,” is an example of the era’s excesses.

1977 Chevrolet Corvette IMSA

Offered for sale by noted Porsche 959 restorer Canepa, the SuperVette was built to take advantage of a rule change in IMSA road racing. In 1976, the sanctioning body allowed full tube-frame cars to compete in its top-level series. Corvette racer John Greenwood saw this as an opportunity to build a more competitive car, and teamed up with designer Bob Reilly to make a tube-frame Corvette. This Corvette—COV002—is one of two chassis completed in 1977.

1977 Chevrolet Corvette IMSA

This car has almost nothing in common with a stock 1977 Corvette, which is a good thing because Corvettes offered very little performance at the timie. Underneath the swollen bodywork is a chassis and roll cage made from 2.0-inch chrome-moly tubing. Its bulging hood hides an aluminum 500-cubic-inch big-block V-8, making more than 750 horsepower. It was built by Don Nichols, whose Shadow Racing team competed in Formula 1, Can-Am, and F5000. The engine is harnessed to a Jerico 4-speed manual transmission.

1977 Chevrolet Corvette IMSA

COV002 was bought by John Paul, Sr. for the 1978 season. Paul raced with his son, John Paul, Jr., and both were later convicted for running an illegal marijuana trafficking operation. It was a different time, for sure.

1977 Chevrolet Corvette IMSA
1977 Chevrolet Corvette IMSA

It was the elder Paul who specified the Nichols-built engine, rather than one built by Greenwood. In an effort to reduce drag, the car also got a narrower track and more aerodynamic bodywork than its sibling.

1977 Chevrolet Corvette IMSA

Paul raced the ‘Vette during the 1978 IMSA season in the GTX class, primarily competing against Porsche 935s. The car earned two podiums that year. After that, it was sold but continued to race through the 1982 season. After retirement, the car changed hands a few more times before being bought by Canepa.

1977 Chevrolet Corvette IMSA
1977 Chevrolet Corvette IMSA

The Corvette has been restored to its 1978 racing specifications, and is currently eligible for to compete in vintage racing, according to Canepa. The seller didn’t list a price, but we don’t expect a car with this pedigree to sell cheap.

1977 Chevrolet Corvette IMSA
1977 Chevrolet Corvette IMSA
1977 Chevrolet Corvette IMSA
1977 Chevrolet Corvette IMSA

Stephen Edelstein for Motor Authority


Watch a C8 Mid-Engine Corvette Hit 173 MPH on a Dry Lake Bed

Even off the pavement, the new ‘Vette is a rocket ship.

The 2020 C8 Chevy Corvette is a fast car. In base form, it can hit a staggering 194 mph flat-out. Even with the drag-inducing Z51 performance package, the car can still do 184. Hennessey Performance took theirs to 182 mph with ease before they turbocharged it to oblivion. Now, there’s another C8 top-speed run on the internet, and this time, it takes place on a dry lake bed.

Popular YouTube TheStradman took his new Z51-equipped Corvette to a dry lake bed in Utah to test out the top speed of the car. He managed to hit an impressive 173 mph before slowing down—not bad considering the uneven and bumpy surface. It helps that there’s absolutely nothing for miles in either direction. In fact, from inside the cabin, it looks a bit uneventful. Here’s a perspective from outside the car to give you a sense of how fast 173 mph is:

If the base Corvette is this quick right out of the box, we’re curious to see how the upcoming Z06 stacks up. Considering the last-gen car could hit 200 mph, we’re expecting big things.

Source: Brian Silvestro; for RoadandTrack


Mid-Engined Chevy Corvette Video Analyses The 2LT Interior

The Goldilocks zone of Corvette C8 interiors?

By now, you should know that Chevrolet has started deliveries of the mid-engine 2020 Corvette. Lucky owners of the ‘Vette C8 are starting to receive their newest toy and most likely you’ve already seen one on the streets – that’s if the state you’re in is not affected by the coronavirus lockdown.

If you’re among those who are planning to purchase the new Corvette but are undecided with the trim level to choose, this video might be able to help you – especially if you’re particular with a car’s interior.

The Corvette C8 comes with three trim levels: 1LT, 2LT, and 3LT. The differences lie mainly in the features offered on each trim level, which defines that the cabin will look and feel like. That’s pretty important, considering that we spend so much time inside the car rather than staring at our investment from a distance. So, here’s a little guide.

The base 1LT trim isn’t really basic. With the entry-level trim, you already get the GT1 seats wrapped in mulan leather, a customizable 12-inch gauge cluster, push-button ignition and keyless entry, and an 8-inch Chevy MyLink infotainment system with Apple CarPlay and Android Auto, 4G LTE Wi-Fi, and 10-speaker Bose sound system. The Corvette 1LT trim is available in three color options: black, gray, or red.

Going up the 2LT trim gives you more interior color options plus features like a rearview camera mirror, a colored head-up display, heated/cooled seats, heated steering wheel, advanced blind-spot monitor, and rear cross-traffic warning. The infotainment gets upgraded as well with a wireless charger and a 14-speaker Boss audio system.

Finally, the 3LT trim dials up the ante by adding a premium Nappa leather with suede microfiber accents – all in combination with the GT2 seats that have more bolsters. These seem not a lot but the range-topping trim adds luxury to the sports coupe.

If you’re still undecided, watch the 2LT interior review on top of this page to check whether you need to take it down a notch to 1LT or go all out on the top-level 3LT.

Source: HorsePower Obsessed


How to Pump Gas without Passing Germs Around

The etiquette of doing something you do regularly while staying safe and clean.

  • We might need new gas-pumping etiquette rules for the 21st century, both for selfish and altruistic reasons.
  • We’ve known since 2011 that gas pump handles can be filthy—they’re worse than ATMs or escalators, even—but there’s no reason to worry if you take the right precautions.
  • You can lower your risk by using gloves or paper towels to gas up, using touch-free pay options, and staying as physically separate from others as possible as you refuel.

You may have heard this one before: the best way to avoid catching some sort of communicable disease is to wash your hands well, and often. This advice isn’t exactly new, which hints at how reasonable and responsible it is.

Washing your hands to stay clean was the takeaway lesson from a 2011 study conducted by Kimberly-Clark Professional, which found gas pump handles were “the filthiest surface that Americans encounter on the way to work,” according to Reuters. The Los Angeles Times reported back then that the study found 71 percent of gas pump handles the Kimberly-Clark researched tested were considered “‘highly contaminated’ with the kinds of germs most associated with a high risk of illness.” Compare that to only 41 percent of ATM buttons and 43 percent of escalator rails.

The Kimberly-Clark Professional tests were done in big cities (Atlanta, Chicago, Dallas, Los Angeles, Miami, and Philadelphia) almost a decade ago, but when something like the coronavirus impacts pretty much every corner of the world, it’s a good reminder to take care when gassing up. When it comes to the COVID-19 coronavirus specifically, the National Institutes of Health has issued information that explains that coronavirus can be stable for 24 hours on some surfaces like cardboard and “up to two to three days on plastic and stainless steel.”

If you’re not already carrying disinfecting wipes in the car with you, this is a good time to start, assuming you have some available, and wipe off the pump handle and touchscreen, or any other surfaces you plan to touch, before your hands make contact. Even better, it might be a good idea to search out a station that accepts contactless payment at the pump, so you won’t need to come into physical contact with the touchscreen or anything else other than the pump handle. Two easy solutions to this issue are to either wear gloves or to use the paper towels commonly provided for window cleaning as a guard between your hands and the screen, buttons, and pump handle. Keeping gloves in the car is a good idea, but they shouldn’t be the disposable sterile gloves that hospitals can use when there’s a need for them there. If you don’t have gloves, keep some hand sanitizer in the car to use on your hands after filling up.

As for social distancing, it’s convenient that gas pumps are relatively far apart from one another, contagion-wise, but even so, choosing to fill up your tank at an off-peak time can be safer. If there are other people getting gas at the same time, keeping at least six feet between you and them is a good idea for everyone involved. And it should go without saying that you shouldn’t go into the store unless there’s a reasonable need to do so if there’s still a rapidly spreading disease going around.

The actual chance that you will catch a transmittable viruses at the gas station is low. As the Illinois TV station ABC-20 reported based on answers from a medical expert, the sequence of events that have to happen to get the virus from someone who has it (someone coughing onto the pump handle or touching the touchscreen with virus on their hands, and then you touching it and then your face) can be interrupted in any number of ways. Even so, there’s no harm in being extra careful in these potentially dangerous times.

Sebastian Blanco- Car and Driver


Hennessey’s twin-turbo C8 Chevy Corvette V-8 makes 643 horsepower early in development

2020 Chevrolet Corvette Stingray undergoes twin-turbo conversion at Hennessey
2020 Chevrolet Corvette Stingray undergoes twin-turbo conversion at Hennessey
2020 Chevrolet Corvette Stingray undergoes twin-turbo conversion at Hennessey
2020 Chevrolet Corvette Stingray undergoes twin-turbo conversion at Hennessey
2020 Chevrolet Corvette Stingray undergoes twin-turbo conversion at Hennessey

It took 30 hours for Hennessey Performance Engineering to tear apart a new 2020 Chevrolet Corvette, install twin-turbo setup, and put it back together.

It’s no surprise, then, that the twin-turbo C8 Corvette isn’t ready to be sold to customers. The engine lacks intercoolers and Hennessey hasn’t cracked the code of GM’s new electrical architecture to reprogram the ECU.

“This is just the beginning, our own car, doing R&D,” company founder and CEO John Hennessey told Motor Authority.

On Monday, the engine made 643 horsepower and 570 pound-feet of torque at the wheels on a Dynojet dyno while running just 5 psi of boost. That compares to baseline testing HPE performed on the stock car which revealed 466 hp and 451 lb-ft of torque. HPE plans to offer a 1,200-hp version of the C8, which Hennessey said could make 18-20 psi of boost.

Hennessey took delivery of an orange C8 Corvette in Detroit on March 13. He and his daughter, Emma, drove back to the performance outfitter’s Texas headquarters and performed baseline testing before the Hennessey team tore apart the car.

The orange C8 fired back to life on Friday with twin 62-mm Precision Turbos and twin blow-off valves connected to the throttle body mounted behind the catalytic converters. Both turbos are oil-cooled with twin scavenge pumps that feed back into the motor.

The system is not intercooled. Instead, there’s a methanol injection setup to keep things from getting too hot. HPE is considering where to put intercoolers. The current packaging has limited space for intercoolers without cutting into trunk space, which Hennessey does not want to do. 2020 Chevrolet Corvette Stingray undergoes twin-turbo conversion at Hennessey

Hennessey told Motor Authority his team currently can’t tune the factory ECU, but it is looking at aftermarket solutions for the engine management system. He noted it took a year for solutions to come to market for the C7 and added, “hopefully, it won’t take a year.”

Hennessey said when the turbocharged C8 was first started it didn’t throw any codes, errors, or a check engine light. “The computer seems happy with the turbos,” Hennessey noted. A check engine light did appear when the front wheel speed sensors were disconnected to put the car on the dyno, Hennessey said.

The orange C8 will used for R&D of upcoming modifications. Hennessey said he doesn’t expect to deliver modified customer C8s for at least six months, and all will have intercoolers and full plumbing.

Joel Feder for Motor Authority


2020 Chevrolet Corvette vs. 2020 Ford Mustang Shelby GT500 at the Drag Strip

Did you see the two race on YouTube? We’ve tested them, too; here’s why the results were no surprise.

image
  • We have tested both the 2020 Chevrolet Corvette (11.2 seconds at 122 mph) and the 2020 Ford Mustang Shelby GT500 (11.4 seconds at 132 mph) in the quarter-mile.
  • A video on YouTube, however, shows flipped results: 11.5 seconds at 120 mph for the Corvette and 10.8 seconds at 132 mph for the GT500.
  • As always, the driver and track conditions are critical, and our two-run average is far more repeatable than any one-off run at a drag strip.

When we tested Ford’s new 2020 Mustang Shelby GT500 against the top-dog 2020 Chevrolet Camaro ZL1 1LE, the Mustang came out on top on the drag strip. But how does the front-engine Shelby stack up against the other, now mid-engine, threat from Chevy?

image

Greg PajoCar and Driver

image

During our testing, the GT500 hurtled through the quarter-mile in 11.4 seconds at 132 mph. But that was on a regular street-like surface, not a sticky, prepped drag strip. We struggled mightily with traction at launch, and our best run was with the launch control set to the lowest rpm allowed (1200 rpm) to prevent igniting a rear-tire fire. However, no surprise: with more traction far, better numbers are possible, and we’ve seen numbers below 11 seconds at drag strips, including this kid, who ran a 10.665 shortly after he acquired the car.’Murica Which Ultimate Pony Car Is the 1/4-Mile King?This Kid Ran a 10.66 Quarter Mile In His GT500

On the other hand, the 2020 Corvette has far fewer launch struggles, as it benefits from its newly acquired mid-engine layout and rear weight bias. Moving the weight distribution rearward improves launch traction, helping it jump off the line much quicker. During our testing, and despite far less horsepower, the mid-engine Vette outaccelerated the GT500 through the quarter-mile by two tenths of a second, reaching it in 11.2 seconds at 122 mph.Advertisement – Continue Reading Below

We’re starting to see other people’s numbers from both of these cars, though, as customers are starting to take deliveries of their C8 Corvettes and GT500s. Contrary to our test results, there’s a video circulating on YouTube that shows the new GT500 beating the C8 Corvette through the quarter-mile by seven-tenths of a second. It raced to the quarter-mile in 10.8 seconds while the Corvette reached it in 11.5 seconds.

Keep in mind that the driver and conditions are huge factors in quarter-mile and acceleration results. We suspect that here, the Corvette likely got bogged down on the high-grip surface, as the launch control isn’t optimized for those conditions, and the 760-hp Mustang benefited from the extra traction on the track.

 Connor Hoffman for CarandDriver


Chevy Camaro Mid-Engine Rendering Could Be Corvette’s Cool Sidekick

It’s not such a crazy idea.

The Chevrolet Corvette went mid-engine, so why not the Camaro? That’s the question this particular rendering from Carlifestyle on Facebook asks, figuratively and literally in the post. Sometimes, these oddball renderings can go off the rails but if we’re honest, this one has our interest … in a good way.

It’s not hard to see shades of the Lamborghini Huracan in this design, presumably because that’s the car this rendering is based upon. The side intake and lower rocker trim is a dead giveaway, but beyond that, this car definitely looks like a proper good ol’ Camaro.

And what are the attributes of this, dare we say, Lamaro? As with all things mid-engine, the nose is short and the hips are wide to accommodate an engine behind the driver. From this angle, it’s quite impressive how well the pony car adapts to life as a mid-engine supercar. Of course, this is also an exceptionally well-done rendering that could pass for something real if we didn’t know otherwise.

Here’s a radical thought. The Corvette and Camaro were a stout one-two punch for Chevrolet as front-engine performance machines from America. Camaro sales have fallen sharply in recent years, and the Corvette has transitioned to its new mid-engine form. Maybe creating a mid-engine Camaro could be the pony car’s salvation. Keep the one-two Bowtie punch, just move both the ‘Vette and ‘Maro to the mid-engine world. The Camaro certainly wouldn’t have any domestic competition in such form, and we wouldn’t have even a teeny problem driving the car you see here – be it a V6, V8, or even a neat hybrid.

Alas, Chevrolet already had the guts to build the C8 Corvette with its engine behind the driver. As such we suspect that absorbed all of GM’s gambling chips so the Camaro’s future will likely be far less interesting. The car is expected to disappear in the next couple of years as the current generation winds down, fading into the annuls of automotive history for a second time.

Christopher Smith for Motor1


2020 Chevrolet C8 Corvette Test Drive: Automobile All-Stars Winner

2020 Chevrolet Corvette at 2020 Automobile All Stars

William Walker: Photographer Manufacturer Photographer Mar 11, 2020

It’s weird to say, but immediately after my first test drive in the new mid-engine, eighth-generation 2020 Chevrolet C8 Corvette, I was angry. Angry not because the car didn’t do what it should, but precisely because it did everything I asked of it, and did it beautifully—and I’d been led to believe it was a hot, understeering mess by the reviews I’d read elsewhere. How could they all have been so wildly off base?

There are many possible explanations, of course—differing driver skill levels, evaluation methods, and conditions. But two variables stand out among the rest: the C8 Corvette’s option for track or street alignments, and the length of exposure to the car. Addressing the latter issue first, we were lucky enough to spend the better part of week with the new C8, a rare chance given the limited availability of test cars so early in the Corvette’s production (All-Stars testing took place in early December 2019). That greater exposure to the car allowed us more time to get a feel for its behavior in a wide array of situations, both on the road and on the Streets of Willow Springs racetrack.

Perhaps even more importantly, however, was the choice of track and street suspension alignments. You see, the 2020 C8 Corvette has two official specifications for its alignment settings; the street alignment sets the camber at 0 degrees, while the track alignment sets the camber to 3 degrees negative. The result is the difference between a (somewhat) understeer-biased street setup and a balanced, ready-to-rotate super sports car. The former is intended to help Corvette owners new to the world of low polar-moment mid-engine cars make the transition without ending up backward in a guardrail their first time out. We spent our week with the Corvette in track-alignment mode, whether hammering out laps or zooming around the mountains near Lake Hughes.

2020 Chevrolet Corvette 30

But wait, isn’t that cheating, you ask? It might seem like it at first—track settings are meant for the track, not the street, right?–but Chevrolet itself recommends owners who use the track setting for track go ahead and leave the car setup that way all the time. No, it won’t cause excessive or premature tire wear, at least according to Chevy’s engineers. For the record, we did visually notice more wear to the front tires’ inside shoulders than we’d expect with the more conventional setup, so we’d be curious to see the state of the rubber after 5,000 or so miles with this alignment. It’s certainly something for owners to be aware of and to keep an eye on, at the very least.

Regardless, and not for nothing, the two alignment settings might better be named “beginner” and “advanced”. If you’re a moderately accomplished driver who’s comfortable with a car that’s willing to rotate, don’t leave the lot with your new Corvette until you’ve had the car set to its more aggressive alignment.

With that out of the way, holy cow, is this thing good! The nearly instant-on torque from the 6.2-liter V-8 means you’re never left wanting for thrust, the quick-shifting eight-speed dual-clutch transmission bangs out upshifts with authority, and the steering feel, while not telepathic, is still abundantly communicative. Detroit bureau chief Todd Lassa did note, however, that several of our evaluators found “the steering in its own separate Track mode is too heavy without doing anything for feel,” and resident professional race driver Andy Pilgrim pointed out, “The gearbox is very good on the street, but did not always give me the lower gear I wanted on the track.” If those are the worst things we could think to say after back-to-back runs in hardware as exotic as the $474,000-plus Ferrari F8 Tributo and the nearly as pricey McLaren GT, it’s pretty apparent the mid-engine Corvette is something special.

Braking is remarkably stable for a mid-engine car, as is power application, the latter thanks at least in part to the car’s Performance Traction Management system. Chevy’s PTM is one of the key technology transfers from the factory Corvette Racing program, and it shows its racing roots when put to the test. But of course even the best traction-control programs can’t work when the tires aren’t in contact with the road; that’s where the Corvette’s excellent suspension tune comes in.

2020 Chevrolet Corvette 26

“Glides over broken mountain roads like a hovercraft—but still sticks like crazy,” wrote contributor Arthur St. Antoine in his evaluation notes. Pilgrim agreed, noting the C8 Corvette “has more suspension travel than the Porsche 992, and feels more compliant, allowing more roll in transition; none of which is a bad thing for everyday driving comfort.”

In fact, far from a rabid, on-the-edge supercar, it’s clear the Chevy engineers behind the new C8 Corvette put a great deal of time and effort into the car’s daily driving demeanor, or, as features editor Rory Jurnecka noted, “It should make a nice road car with good interior space. Feels pretty easy to live with.” Not only is there a rear trunk that’ll fit two golf bags (or several carry-on bags or backpacks), there’s a front trunk (or frunk) that’ll hold some more. But the new C8 Corvette’s interior is what truly stands out in terms of daily comfort, especially in comparison to previous Corvettes.

“When I took the C8 on the road trip between the hotel and the winners’ shoot location, I was blown away at how good of a GT car it is,” social media editor Billy Rehbock said. “I put on the cooled seats, played music over the crystal-clear sound system, and rolled in complete comfort. My only complaint was that it was actually a bit quiet, even when being driven hard, but subsequent performance versions will fix that, no doubt.”

Beyond even the excellent interior feature set (though the verdict is still out on the extra-long button strip in the center console), the most notable and immediately noticeable upgrade to the C8 Corvette’s interior is the massive improvement of materials and build quality over previous generations. Our test car’s 3LT interior trim specification included Chevy’s upgraded infotainment system, a 14-speaker Bose audio system, and a head-up display. And in addition to the upgraded materials, it featured extended leather surface treatments, and GT2 bucket seats—though ours swapped the GT2 seats for “competition sport bucket” seats for an extra $500); the 3LT spec added $11,950 to the car’s $59,995 base price. Tack that cash onto the additional list of optional extras like the Z51 performance package ($5,000), magnetic ride control suspension system ($1,895), front lift system ($1,495), upgraded 19-inch front/20-inch rear wheels and tires ($1,495), and engine appearance package ($995), among others. Total price, as configured: a surprisingly reasonable $83,825.

Admittedly, this was a pre-production car, but it was also one of just a handful of streetable C8 Corvettes available at the time, meaning it had already lived a rather hard life before our testing even began. Sitting in the C8 back-to-back with the Ferrari F8, the Italian doesn’t come off as insanely luxurious or refined—and the F8’s interior is already perfectly lovely.

It’s no revelation that the 2020 Chevrolet C8 Corvette is a great performance value; the Corvette has been that way for decades. But for Chevy to have done such an impressive job on its first go with the engine behind the driver, and to have included so many improvements to the luxury and quality of the C8, all for a price that’s a fraction of the cars with which it competes, it’s easy to see why I was so angry after experiencing the car for myself—and it’s hard not to agree with Jurnecka when he says, “So glad this car is what I’d hoped for. Worth the wait.”

Nelson Ireson for Automobile