Open-Throttle Therapy Awaits In A 2020 Chevy Corvette Z51

A small donation to Ronald McDonald House could permanently put you in the driver’s seat of the fastest production Corvette yet!
Commonly referred to as “America’s Sports Car”, the Chevrolet Corvette has been offering thrills since its big unveiling back in 1953. With 60 years of production over eight generation designs, the all-new C8 Corvette is a game-changer. For the first time, the model is powered by a mid-mounted V8 engine. Even the C8’s body was drastically redesigned for aerodynamics, but stunning enough to stop car enthusiasts dead in their tracks. Get get your hands on the fastest production Corvette yet – a 2020 Chevrolet Corvette Z51 with 3Lz trim. A small donation to the Ronald McDonald House will enter you into the drawing for this incredible C8. Enter the code WIN here to receive double entries!
Finished in a stunning Elkhart Lake Blue Metallic, the exterior is nothing short of magnificent. On all four corners sit staggered 5-spoke Carbon Flash-painted aluminum wheels (19-inch front, 20-inch rear) wrapped with sticky Michelin Pilot Sport 4S rubber. Further complementing the exterior is the addition of a high-wing Carbon Flash rear spoiler and an exposed carbon fiber ground effects kit. Open the doors to a stunning black interior that features carbon fiber trim and GT2 bucket seats.
Powered by a mid-mounted 6.2-liter LT2 V8 engine with an appearance package, the new C8 generates 495-horsepower and 470 lb/ft of torque that can propel this car from 0 to 60 miles per hour in a lightning quick 2.9 seconds. Sending that power down to the rear wheels is an 8-speed Dual Clutch automatic transmission. The Z51 Package gives this aggressive Corvette a unique Z51 adjustable performance suspension, an electronic limited-slip differential, an altered axle ratio, large Z51 Brembo brakes, a sport exhaust, enhanced cooling, and improved traction.
If you’re looking for a car that is can drive to the track, smoke the competition, and then drive home, look no further than this performance-oriented 2020 Chevrolet Corvette Z51. Even if the track isn’t your thing, this would make one head-turning daily driver. A small donation to the Ronald McDonald House will enter you into the drawing for this incredible C8. Enter the code WIN here to receive double entries! The Ronald McDonald House helps support families to stay close to their child while they receive treatment at a local hospital.
*Actual Corvette may vary from images above based on availability.*
Sign up for the Motorious Newsletter. For the latest news, follow us on Facebook, Twitter, and Instagram.
Amie Williams for Motorious
August 11, 2020 | Categories: 1990s corvette, 2020 Corvette, 2020CorvetteC8Stingray, 2020MidengineCorvetteC8Stingray, 2021 Corvette, C7 Corvette, C8 Corvette ZR1, CHEVROLET CORVETTE, Corvette, Corvette Assembly Plant, Corvette C7.R, Corvette C8, Corvette C8.R, Corvette GXE, Corvette Heros, Corvette Racing, corvette z51, CorvetteZ06, National Corvette Museum, Z51 Corvette | Tags: 2020 Chevy Corvette Z51, 2020corvetteC8Stingray, best carbon fiber, carbon fiber, carbon fiber center mode, carbon fiber extreme, carbon fiber front splitter, carbon fiber interior, carbon fiber mooresville, carbon fiber products, carbon fiber rockers, carbon fiber roof panel, carbon fiber side panel, carbon fiber spoiler, carbonfiberextreme, carbonhans, center mode, chevorlet, chevrolet, Coronavirus, corvette, corvette assembly plant, Corvette C8, corvette c8 Z06, Corvette C8.R, Corvette GXE, Corvette heros, Corvette Racing, corvette reveal, Corvette Stingray, Corvette Stingray C8, CORVETTEC7, corvettez06, corvettez51, deBotech, front splitter, General Motors, gm, Hans deBot, Iredell County, Jamye deBot, Mechanical and Aerospace Engineering, Mooresville, Mooresville NC, NC State University, Town of Mooresville, Z51, z51 corvette | Leave a comment
Everything You’ve Ever Wanted To Know About Hot Wheels (But Never Asked)

Many gearheads have a strange affinity to Hot Wheels. Here is everything you’ve ever wanted to know about the company, but never asked.

Toy cars can be divided into two categories: Hot Wheels and everybody else. For over 50 years, Mattel has dominated with what is now recognized as the best-selling toy in the world. It’s impossible to count how many car buffs, from mechanics to real race stars to TV personalities, grew up playing with these cars. Whether it was just a few models or massive collections, Hot Wheels has been part of car culture for decades and is never going to stop. Whether it’s a simple model or some fancy licensed vehicle, Hot Wheels simply enthralls.
Yet it’s incredible how some people are unaware of the facts of the company and its history. From its unique origins to how these cars are put together, the story behind Hot Wheels is fascinating. There are also touches from how some of these cars are more expensive than real ones to some unique touches on the culture. Here are 20 amazing facts about Hot Wheels to prove they’re more than just “kids toys.”‘
20/20 Real-Life Hot Wheels Jump Was A World Record

Growing up a massive Hot Wheels fan, racer Tanner Foust decided to honor them in a fun way. At the 2011 Indy 500, Foust talked the management into seeing up a massive orange ramp and raced down it in a rally car.
After 90 feet of track, Foust sailed 332 feet, the longest record for such a move. He topped it by driving through a 66-foot loop in 2012 to live out the dreams of every kid.
19 Technology In Car Building Is Amazing…
Making toys has become a very high-tech business today. Just like real car companies, Hot Wheels has adapted to the 21st century nicely. Computers and 3-D technology are utilized to make sure the designs are perfected before the building begins.
It also helps them keep on top of the latest car trends to ensure that today’s Hot Wheels are sleeker and more natural than the ones of the past.
18 But They’re Still Diecast

There are many toy car lines out there, but Hot Wheels is still the king of the bunch. The key reason is that, for all the advances in technology, every car is still diecast and built mostly by hand.
Even when cheaper materials are available, Mattel knows the diecast is what the fans want. It’s also helped in making customized cars at home for popular models. After 50 years, Mattel doesn’t want to mess with success and do away with diecast.
17 They’ve Worked With NASA

Hot Wheels have done a few astronaut-themed toys over the years. But that’s not the only connection they have with NASA. In 1998, they were able to work with the agency to create an exact replica of the Mars Rover, which landed on the Red Planet that very year.
They also worked with them in 2012 for scale models of the Curiosity rover. It’s amazing how the company got access to top-secret plans to make these toys.
16 Collectors Take It Seriously

Some may dismiss Hot Wheels as “just for kids.” But collectors take it more seriously than real automobiles. The 1969 Volkswagen Beach Bomb (only 16 prototypes were made) is known to go for at least $15,000.
Some rare models can go for a hundred grand, and collectors are always on the lookout for unique mint models. Entire museums are devoted to various cars as some Hot Wheels collections put legit car collectors to shame.
15 Scaling Down The Cars Was Tricky

A key to the company’s success is that they work with scores of real car companies to get looks at plans for their toy models. Yet it’s not so simple as just “make a smaller version.” The biggest challenge is to achieve the proper scale for the toys in a diecast model yet retain the details of the actual car.
That can be complex with some fancy vehicles. That every model has to be sized to fit the same tracks just adds to why it takes as long developing a toy car as a real one.
14 NASCAR Star Has The Record For The Longest Track

Ever since the Hot Wheels tracks were created, fans have been trying to top themselves making the most extended and most complex. A few have achieved great ones, but it’s fitting a NASCAR star holds the record for the longest.
In 2019, Joey Logano unveiled a 1,941-foot long track stretched across his garage. It weaves through his car collection with 1222 boosters before ending in Logano’s own 2018 HW Ford Mustang. Add yet another title to Logano’s list of accolades.
13 They Made A Car Coated In Diamonds

In 2008, Mattel made a big deal of celebrating the 40th anniversary of the Hot Wheels line. As a special reward, Mattel had Jasons of Beverly Hills craft the most expensive Hot Wheels car on the planet.
Cast in 18-karat gold, it’s covered with 2700 diamonds and gems totaling nearly $150,000 today. It’s become a rotating exhibit at toy museums for the glitziest Hot Wheels you could see.
12 The Darth Car Is A Speed Machine

While they do stick to toys, the company has been busy creating some real-sized cars for collectors. One of the most notable is based on Darth Vader, with the hood looking like his fearsome helmet and in jet black.
This isn’t just for show as it’s based on a C5 Corvette with a GM LS3 V-8 engine capable of 526 hp and 150 mph. The Dark Lord of the Sith would be proud of this powerful craft.
11 Every Car Is Tested To Make Sure It Can Run A Track

Almost from the beginning, Hot Wheels car fans had to have a track with the cars. They’ve gone from straight lines to elaborate roller-coaster-like loop systems to leave kids entertained for hours.
What few realize is that the track determines if a car makes it as Mattel prides itself on “every car can fit every track.” More than once, a prototype has to be altered when it won’t fit as the track decides a car’s final form.
10 There Are More Hot Wheels Cars Than Real Cars

While it’s tricky to figure out for sure, most sources agree there are at least one billion cars on the planet (give or take a few hundred thousand in auto graveyards). In contrast, since 1968, six billion Hot Wheels cars have been created.
True, many have been trashed and/or recycled, and it’s impossible to count how many have been lost in backyards. But given how 16 cars are produced every second, it’s no shock the toys outnumber the real deals.
9 Several Creators Are Legit Car Designers

The one constant of Hot Wheels is that the cars look just as good as the real deal. There’s an excellent reason for that as scores of the manufacturers are legitimate car designers. Larry Wood was a veteran of Ford before becoming one of the first Hot Wheels designers.
He’s not alone as Jack Ryan was a rocket designer who crafted the bearings that made the cars so great. Scores of the car designers were in real automobiles first, so it’s no wonder the vehicles look so good.
8 The Original Camaro Is Worth A Fortune

Mint conditions of the Original 16 Hot Wheels releases are all pretty collectible items. But one dominates from the pack. While versions of a Camaro were produced, a few had white enamel paint.
They had been meant to discover flaws in a prototype but accidentally released. A mint version of one went for a hundred thousand dollars and made this one of the most expensive toys on the planet
7 They Released A Custom Corvette Before GM Did

An early standout for the company at a custom Corvette in 1968. What made it notable was that the toy was released before GM had their actual Corvette in car dealerships.
The fact designer Harry Bradley had worked at GM indicates he may have “borrowed” the designs before he left to allow Mattel to beat GM to releasing a Corvette to the masses.
6 The Red Stripes Are Expensive

If you find what looks like an old Hot Wheels car, take a good look at the wheels. If they have red stripes, then you’ve just found a fantastic collector’s item. From 1968 to 1977, designers hand-painted red lines onto the wheels to make the cars look distinctive.
As a cost-cutting measure, they switched to all-black wheels in 1978. Some mint condition red-striped vehicles have been known to go for thousands online.
5 One Of The Original Cars Was Based On A Car With No Doors

The first wave of Hot Wheels was just 16 cars, and any of them can be valuable today. One is notable, the 1965 Dodge Deora. This car boasted no doors but rather a hatch for folks to crawl into.
It was based on a fun design used by Mike and Larry Alexander but in an irony, no real Dodge Deoras were built, to make this a truly unique model
4 A Tie-In Cartoon Got Pulled By The FCC

Today, cartoons based on toy lines are commonplace. But in 1969, Hot Wheels got in trouble when they put out a cartoon series about some teenage car drivers. Despite good messages, the show was hit by complaints about being a “half-hour commercial.”
The FCC agreed, and it was yanked off the air. The company was just ahead of their time with a cartoon tie-in for a hit toy line.
3 There’s A Fight On Where The Name Came From

Much of Hot Wheels is shrouded in myth, and that includes just where the name comes from. The familiar story is that when Eliot Handler saw the first models from designer Fred Adickes, he remarked: “those are some hot wheels you’ve got there.”
Another version is that Handler just blurted the name out in a meeting with a designer. Regardless, it just stuck to become one of the most popular toys on the planet.
2 They’re Number One…Because They Remain So Cheap

In the ranks of the most popular toys on the planet, Hot Wheels dominates. They’re not just the biggest toy vehicle sellers but also the number one selling toy in the entire world. The reason is that in many markets, the cars can still go for only a dollar each.
True, they can be put out in packs, and some nations charging a few bucks more. But many stores do sell the cars for less than a bottle of water, which is the reason they are so dominant.
1 Its Creator Was Married To Barbie’s Creator

Elliott and Ruth Handler were the First Couple of the toy world. The two had founded Mattel as a picture frame company in 1945. While making a dollhouse, Ruth decided to craft a series of dolls she named Barbie.
It was an instant hit to make Mattel a success. Elliott then realized how a toy car line could be great for boys to craft what would become Hot Wheels. The two remained together until Ruth’s death in 2002 (Elliott passed on nine years later) to be icons of their industry.
Sources: Mentalfloss.com, hotwheels.com, hotwheelsmedia.com, thrillist.com
April 21, 2020 | Categories: 1950s corvette, 1960s corvette, 1967 Corvette Stingray, 1970s corvette, 1980s corvette, 1990s corvette, 2014 olympic games, 2016, 2018, 2020, 2020CorvetteC8Stingray, 2020MidengineCorvetteC8Stingray, 2020Stingray, 900 hp, advance technology, Alex Ivanov, America's Cup team, American Magic, American Race Cars, Andrew Blaser, Antonio Garcia, Austin Florian, Barrett-Jackson, Baseball World Series Champs, BMW, bmw bobsleigh, bobsled, bobsledding mens sports, bobsledding womens sports, Bowling Green, KY, burnout, C7, C7 Corvette, C8 Corvette ZR1, C8 Z06, C8 ZR1, C8R, C8Z06, Camaro, car, car of the year, carbon fiber, carbon fiber bobsleigh, carbon fiber composite, carbon fiber extreme, carbon fiber product, cars, Chevrolet, CHEVROLET CORVETTE, Cigarette Edition SUV, CLASSIC CARS, CLASSIC RIDES, Coronavirus, Corvette, Corvette Assembly Plant, Corvette C7.R, Corvette C8, Corvette C8.R, Corvette GXE, Corvette Heros, Corvette Racing, corvette z51, CorvetteZ06, COVID-19, Dakar, Daytona Beach, Daytona International Speedyway, debotech inc, deBotech, Inc, Detroit, drivers, Driving School, Employee Appreciation, F1, F1 champ, face masks, Fernando Alonso, Florida, Football, Ford Shelby, Formula 1, freeway, funny, General Motors, Germany, GM, halloween, Hans deBot, Hennessey, Henry Ford, Henry Ford Museum, highway, Hot Wheels, Hunter Church, hybrid system, IBSF, Igls, Austria, IMSA, interstate, Iredell County, Jaguars, Japan, Jay Leno, Jets, Jimmy Reed, Josh Williamson, Kaillie Humphries, Kendall Wesenberg, Koenigssee, Kris Horn, Lake Norman, Lake Norman, NC, Lake Placid, Lake Placid New York, las vegas, Lauren Gibbs, Le Mans, legos, Los Angeles, Manufacturing Jobs, Marcel Fassler, Mark Reuss, Mary Barra, Medal, Megan Henry, Mercedes- AMG, Mercedes-AMG G63 Cigarette Edition SUV., Mercedes-AMG G63., Michigan, mid-engine, Mitchell Community College, MLB, Mooresville, NC, NACTOY, NASCAR, National Boss Day, National Corvette Museum, National Guard Educational Foundation, Nürburgring, New York Yacht Club, NFL, North Carolina, Olympic Bobsled, Olympic Bobsled and Skeleton, olympic medal ceremony, Oscar Mayer Winermobile, Park City, Pensacola, Pensacola Florida, performance, Rick Hendrick, Roar Before the 24, Rolex 24, Ron Fellows Performance Driving School, sailboat, Savannah Graybill, SEMA, semashow, semashow2019, Shelby, Shelby GT500, Shelby vs C8, Silver No. 4, skeleton, Sochi Olympics, Sports, sportscar, St. Motiz, Stephen Strasburg, Steven Holcomb, supercar, SWEEPSTAKES, Switzerland, Tadge Juechter, Team USA, Thank you, Tokyo, Under Armour, United States Armed Forces, USA, USA bobsled, USA skeleton, USABS, Veteran, Veterans, Veterans Day, VK, VKTRY, Washington Nationals, Waukesha, winter olympics, Wisconsin, World Cup, World Series, z06, z51, ZR1 | Tags: Camaro, car, carbon, carbon 65, carbon accessories, carbon fiber, carbon fiber extreme, carbon fiber products, carbonfiber, carbonfiberextreme, carbonhans, cars, carshow, deBotech, detroit, Hans deBot, Hot Wheels, Iredell County, MAE Department, Mooresville, Mooresville NC, NC State University, North Carolina, Town of Mooresville | Leave a comment
Mid-Engined Chevy Corvette Video Analyses The 2LT Interior

The Goldilocks zone of Corvette C8 interiors?
By now, you should know that Chevrolet has started deliveries of the mid-engine 2020 Corvette. Lucky owners of the ‘Vette C8 are starting to receive their newest toy and most likely you’ve already seen one on the streets – that’s if the state you’re in is not affected by the coronavirus lockdown.
If you’re among those who are planning to purchase the new Corvette but are undecided with the trim level to choose, this video might be able to help you – especially if you’re particular with a car’s interior.
The Corvette C8 comes with three trim levels: 1LT, 2LT, and 3LT. The differences lie mainly in the features offered on each trim level, which defines that the cabin will look and feel like. That’s pretty important, considering that we spend so much time inside the car rather than staring at our investment from a distance. So, here’s a little guide.








The base 1LT trim isn’t really basic. With the entry-level trim, you already get the GT1 seats wrapped in mulan leather, a customizable 12-inch gauge cluster, push-button ignition and keyless entry, and an 8-inch Chevy MyLink infotainment system with Apple CarPlay and Android Auto, 4G LTE Wi-Fi, and 10-speaker Bose sound system. The Corvette 1LT trim is available in three color options: black, gray, or red.
Going up the 2LT trim gives you more interior color options plus features like a rearview camera mirror, a colored head-up display, heated/cooled seats, heated steering wheel, advanced blind-spot monitor, and rear cross-traffic warning. The infotainment gets upgraded as well with a wireless charger and a 14-speaker Boss audio system.
Finally, the 3LT trim dials up the ante by adding a premium Nappa leather with suede microfiber accents – all in combination with the GT2 seats that have more bolsters. These seem not a lot but the range-topping trim adds luxury to the sports coupe.
If you’re still undecided, watch the 2LT interior review on top of this page to check whether you need to take it down a notch to 1LT or go all out on the top-level 3LT.
Source: HorsePower Obsessed
March 30, 2020 | Categories: 1950s corvette, 1960s corvette, 1967 Corvette Stingray, 1970s corvette, 1980s corvette, 1990s corvette, 2014 olympic games, 2016, 2018, 2020, 2020CorvetteC8Stingray, 2020MidengineCorvetteC8Stingray, 2020Stingray, 900 hp, advance technology, Alex Ivanov, America's Cup team, American Magic, American Race Cars, Andrew Blaser, Antonio Garcia, Austin Florian, Barrett-Jackson, Baseball World Series Champs, BMW, bmw bobsleigh, bobsled, bobsledding mens sports, bobsledding womens sports, Bowling Green, KY, burnout, C7, C7 Corvette, C8 Corvette ZR1, C8 Z06, C8 ZR1, C8R, C8Z06, Camaro, car, car of the year, carbon fiber, carbon fiber bobsleigh, carbon fiber composite, carbon fiber extreme, carbon fiber product, cars, Chevrolet, CHEVROLET CORVETTE, Cigarette Edition SUV, CLASSIC CARS, CLASSIC RIDES, Coronavirus, Corvette, Corvette Assembly Plant, Corvette C7.R, Corvette C8, Corvette C8.R, Corvette GXE, Corvette Heros, Corvette Racing, corvette z51, CorvetteZ06, Dakar, Daytona Beach, Daytona International Speedyway, debotech inc, deBotech, Inc, Detroit, drivers, Driving School, Employee Appreciation, F1, F1 champ, Fernando Alonso, Florida, Football, Ford Shelby, Formula 1, freeway, funny, General Motors, Germany, halloween, Hans deBot, Hennessey, Henry Ford, Henry Ford Museum, highway, Hunter Church, hybrid system, IBSF, Igls, Austria, IMSA, interstate, Iredell County, Jaguars, Japan, Jay Leno, Jets, Jimmy Reed, Josh Williamson, Kaillie Humphries, Kendall Wesenberg, Koenigssee, Kris Horn, Lake Norman, Lake Norman, NC, Lake Placid, Lake Placid New York, las vegas, Lauren Gibbs, Le Mans, legos, Los Angeles, Manufacturing Jobs, Marcel Fassler, Mark Reuss, Mary Barra, Medal, Megan Henry, Mercedes- AMG, Mercedes-AMG G63 Cigarette Edition SUV., Mercedes-AMG G63., Michigan, mid-engine, Mitchell Community College, MLB, Mooresville, NC, NACTOY, NASCAR, National Boss Day, National Corvette Museum, National Guard Educational Foundation, Nürburgring, New York Yacht Club, NFL, North Carolina, Olympic Bobsled, Olympic Bobsled and Skeleton, olympic medal ceremony, Oscar Mayer Winermobile, Park City, Pensacola, Pensacola Florida, performance, Rick Hendrick, Roar Before the 24, Rolex 24, Ron Fellows Performance Driving School, sailboat, Savannah Graybill, SEMA, semashow, semashow2019, Shelby, Shelby GT500, Shelby vs C8, Silver No. 4, skeleton, Sochi Olympics, Sports, sportscar, St. Motiz, Stephen Strasburg, Steven Holcomb, supercar, SWEEPSTAKES, Tadge Juechter, Team USA, Thank you, Tokyo, Under Armour, United States Armed Forces, USA, USA bobsled, USA skeleton, USABS, Veteran, Veterans, Veterans Day, VK, VKTRY, Washington Nationals, Waukesha, winter olympics, Wisconsin, World Cup, World Series, z06, z51, ZR1 | Tags: #chevy, 2020 Corvette, C8 Corvette ZR1, Camaro, car, carbon, carbon 65, carbon accessories, carbon fiber, carbon fiber extreme, carbon fiber products, carbonfiber, carbonfiberextreme, carbonhans, cars, carshow, chevorlet, chevrolet, chevrolet camaro, chevrolet camaro zl1, CLASSIC CARS, CLASSICRIDES, Coronavirus, corvette, corvette assembly plant, Corvette C8, Corvette C8.R, Corvette GXE, Corvette heros, Corvette Racing, corvette reveal, Corvette Stingray, Corvette Stingray C8, corvettez51, deBotech, desert, detroit, fiberglass, Hans deBot, Iredell County, Lake Norman, las vegas, MAE Department, mark reuss, mary barra, Mechanical and Aerospace Engineering, michigan, Mooresville NC, NC, NC State, NC State University, North Carolina, north carolina motorsports association, Sportscar, supercar, Tadge Juechter, Town of Mooresville | Leave a comment
Mid-Engined Chevy Corvette C8 Production Has Started: Report

[UPDATE] Contacted by Motor1.com, GM spokesperson Chris Bonelli says production of the new Corvette will begin in February.
It’s a great day for those who have signed their names on the dotted line to buy a C8 as it appears production of the mid-engined Corvette has finally started. The eighth generation of Chevrolet’s popular sports car was originally scheduled to hit the assembly line towards the end of 2019, but the UAW strike took its toll and forced General Motors to push back production until February.
It looks like they’ve managed to get everything ready a few days sooner, with production at the Bowling Green, Kentucky factory now underway. The reveal comes to us from Chevy salesperson Mike Davenport through his YouTube channel called “Chevy Dude” where he regularly posts videos about everything interesting that’s going on related to the C8 and other models that have the bowtie emblem. He was the first to break the news about Chevy cutting back on dealer allocations for the Corvette’s 2020 model year, which was shortly confirmed to Motor1.com by a spokesperson.
It goes without saying Chevy Dude is talking about the production of customer cars, including his very own C8. Another tidbit revealed is about the cancellation of the optional exposed carbon fiber ground effects for the 2020MY due to supplier issues. If you have ordered the car already with this option, Chevy will have no other way but to delete it.
For those who haven’t pre-ordered the new Corvette and are interested in getting the 2020MY, it appears April is going to be the last month when dealers will be able to ask Chevy for cars. Interestingly, Chevy Dude also knows the production of the mid-engined sports car will transition to the 2021MY in September.
That effectively means the initial model year of the C8 will only be in production for about seven months. We also get to learn the first cars will hit dealers across the country around mid-February or closer to the end of the month.
As you might have heard already, the 2021MY is rumored to come with a price bump, but nothing is official at this point. All we have for the time being is a rumor originating from a “well-placed source” cited by Motor Trend who is saying the Corvette will lose the sub-$60,000 sticker. Chevy Dude doesn’t expect the price increase to be significant, based on his 20-year experience in selling cars and analyzing Corvette pricing changes from one model year to the next.
Motor1.com has reached out to Chevy for comment and will update the article if we get a response.
Source: Chevy Dude / YouTube
January 30, 2020 | Categories: 2016, 2018, 2020, 2020CorvetteC8Stingray, 2020MidengineCorvetteC8Stingray, 2020Stingray, 900 hp, advance technology, American Race Cars, Antonio Garcia, Baseball World Series Champs, Bowling Green, KY, burnout, C7, C7 Corvette, C8 Corvette ZR1, C8 Z06, C8 ZR1, C8R, C8Z06, car, car of the year, carbon fiber, carbon fiber bobsleigh, carbon fiber composite, carbon fiber extreme, carbon fiber product, cars, Corvette, Corvette Assembly Plant, Corvette C7.R, Corvette C8, Corvette C8.R, Corvette GXE, Corvette Heros, Corvette Racing, corvette z51, CorvetteZ06, Daytona Beach, Daytona International Speedyway, debotech inc, deBotech, Inc, Detroit, drivers, Fernando Alonso, Formula 1, freeway, General Motors, Hans deBot, Hennessey, Henry Ford, Henry Ford Museum, highway, hybrid system, interstate, Iredell County, Japan, Lake Norman, Lake Norman, NC, Los Angeles, Mark Reuss, Mary Barra, Michigan, mid-engine, Mooresville, NC, NASCAR, North Carolina, performance, Rick Hendrick, Roar Before the 24, Rolex 24, SEMA, semashow, semashow2019, sportscar, supercar, Tadge Juechter, Team USA, Tokyo, USA, z06, z51, ZR1 | Tags: 2020 Corvette, 2020corvetteC8Stingray, C8 Corvette ZR1, car, carbon, carbon 65, carbon accessories, carbon fiber, carbon fiber extreme, carbon fiber products, carbonfiber, carbonfiberextreme, carbonhans, cars, carshow, chevorlet, chevrolet, chevy, corvette, corvette assembly plant, Corvette C7.r, Corvette C8, corvette c8 Z06, Corvette C8.R, Corvette GXE, Corvette heros, Corvette Racing, corvette reveal, Corvette Stingray, Corvette Stingray C8, CORVETTEC7, corvettez06, corvettez51, deBotech, detroit, Hans deBot, Iredell County, Lake Norman, MAE Department, mark reuss, mary barra, Mechanical and Aerospace Engineering, Mooresville NC, National Corvette Museum, NC State, NC State University, North Carolina, sports car, statesville, supercar, Tadge Juechter, Town of Mooresville | Leave a comment
Lightweight Contender
Honored to be featured in the NC State Alumni Magazine…
Check it out @ http://www.debotech.com/news/Lightweight-Contender/62005
January 16, 2015 | Categories: Uncategorized | Tags: carbon fiber, carbon fiber products, fiberglass, lightweight material, NASCAR, NC State, NC State University, sailboats | Leave a comment
MAE Hall of Fame at NC State Inductee, Hans deBot
Hans deBot, a local businessman and entrepreneur, was inducted into the Mechanical and Aerospace Engineering (MAE) Hall of Fame at NC State University on November 1, 2013. He was nominated for this honor by his colleagues and was selected by the faculty and Dean of the MAE Department at NC State.
See full article @ http://www.debotech.com :
http://debotech.com/wordpress/?p=865
November 14, 2013 | Categories: Uncategorized | Tags: DIY, entrepreneur, Hans deBot, MAE Department, Mechanical and Aerospace Engineering, NC State, NC State University | Leave a comment