Carbon Fiber Extreme

Posts tagged “deBotech

This Working Electric Lego Corvette ZR1 Is Downright Awesome

Watch this video and you’re going to want to build your own electric Lego Corvette

Legos are cool, awesome, and all the superlatives you can throw in between. The things that you can create with these bricks are limited only by your imagination. What makes the toy even better are the things that you can do with it, like, say, add a fully functional electric powertrain on a Lego Technic Chevrolet Corvette ZR1. One guy did exactly that, and he even created a video demonstration of his masterpiece. In the video, we see the Lego Technic Corvette ZR1 strapped on a dyno that’s made from — you guessed it — Lego bricks. What comes next is a four-minute video that’s going to make you want to buy a Technic Corvette ZR1, build your own dyno, and outfit your Lego ‘Vette with its own functional electric powertrain.

Why Is This Lego Technic Chevrolet Corvette Zr1 Different From Its Kind?

It’s different because it has an electric motor and a fully functional one at that.

YouTuber HyperBlue is responsible for this creation, and in his video, he goes into detail on how he turned a Lego Technic Chevrolet Corvette ZR1into a fully functional ride with an electric powertrain and — would you even believe it if we told you — a four-speed manual gearbox.

This, folks, is one of the coolest Legos you’ll get to see.

First, the creator of the project explains that after building the Technic Corvette ZR1, he added a small DC electric motor that’s controlled by a Raspberry Pi computer. The latter, for those who aren’t familiar with it, is a low-cost, credit-card side computer that helps people of all ages explore computing. It can be used in a variety of ways, including, apparently, powering a Lego Technic Corvette ZR1.

From there, the creator of this insane electric Lego ZR1 built a dyno machine — also from Lego bricks — and worked on all the electrical requirements needed to bring his creation to life, literally. It took around ten months for the project to come to life, and it’s not even complete yet. For now, though, it looks about as awesome as you’d expect it to be. The whole setup even comes with an ignition that starts the electric motor, which is then followed by a recorded sound of a real Corvette V-8 engine. As incredible as all of this sounds, the real treats are the wheel-mounted sensors and the accompanying software that allows you to monitor the powertrain’s behavior. An instrument cluster provides information about the car, but since it’s not a real dyno, we don’t get to see the actual output that the electric motor generates.

None of that matters, though, in the grand scheme of things. This whole setup is impressive enough on its own. The attention-to-detail is incredible, and the resourcefulness and ingenuity that comes with it are top-quality. Here’s to hoping that the individual responsible for this creation gets to finish his project.

We’re all rooting for you, just as we’re excited to see what the finished product looks like.

Kirby Garlitos for TopSpeed


Test Drive: The 2020 Chevrolet Corvette Stingray rocks

The first mid-engine production Corvette was six decades in the making

The 2020 Chevrolet Corvette Stingray is a rock star car. I don’t mean that figuratively. An actual rock star owns one.

Chevrolet

Kiss frontman Paul Stanley picked up a white Stingray with a red interior and tweeted his love for it, saying he bought American because it’s beyond “world class.”

OK, perhaps the fact that he’s buds with General Motors President Mark Reuss influenced his purchase, but he’s driving it, so the endorsement is legit.

Chevrolet

Of course, the 68-year-old singer does fit the classic stereotype of a Corvette buyer: mature with money to burn. Just the type of customer many expected to be alienated by the Corvette’s switch from a front- to mid-engine design. So much for that.

The Chevrolet Experimental Research Vehicle, or CERV I, was revealed in 1960 to explore the possibilities of a mid-engine layout.
The Chevrolet Experimental Research Vehicle, or CERV I, was revealed in 1960 to explore the possibilities of a mid-engine layout.

The eighth-generation Corvette is the realization of a dream that dates back six decades, when legendary GM engineer Zora Arkus-Duntov started building mid-engine prototypes because the layout offered potentially better performance than a front-engine design. It’s an idea that race and exotic car builders took and ran with while Chevy stuck to tradition.

The 1990 CERV III never made it into production but could be driven in the video game "Test Drive III: The Passion."
The 1990 CERV III never made it into production but could be driven in the video game “Test Drive III: The Passion.”

Arkus-Duntov’s team and its predecessors developed over the years, but the executives at HQ just couldn’t be convinced. Current Corvette Executive Chief Engineer Tadge Juechter told Fox News Autos that a mid-engine Corvette was rejected as recently as 2006 simply because of inertia.

“There were people when we first started talking about this that were almost entirely naysayers. Virtually nobody in leadership thought it was a good idea because we were building and selling Corvettes to an enthusiastic fan base, or selling them in volumes to make a profit,” he said.

Cooler heads  prevailed as the seventh-generation Corvette was completed for 2014, and Juchter and his team were off to the races, even though none of them had ever worked on a mid-engine car before. You’d never know it.

Chevrolet
Chevrolet

The new Stingray is a radical departure from previous editions, but it keeps many classic Corvette traits intact, including a relatively low starting price of $59,995. Some of the bodywork is technically fiberglass, but in various modern composite forms. Jucther calls it a “mosaic” of materials, which also applies to a chassis made from aluminum, steel, magnesium and a touch of carbon fiber.

(Fox News Autos)

Then there’s the rear trunk, which you don’t often find in a mid-engine car. It’s big enough to fit the lightweight, removable roof panel or two golf bags, because the latter capability may be even more entwined with the Corvette’s image than the location of its motor. Since that’s in the middle of the car, there’s also room for a sizeable front “frunk.”

Chevrolet
Chevrolet

The Stingray’s interior is equally practical, as far as low-slung sports cars are concerned, with enough legroom for the 6-foot-tall Stanley to fit comfortably, perhaps even while he’s wearing his sky-high stage boots. It’s well-trimmed and designed with a lot of interesting details, like panels hovering over the top of the dash, and is more appealing than the cabins in some far more expensive cars, including the $450,000 Ford GT’s stark accommodations.

Chevrolet
Chevrolet

Its one controversial element is a long row of climate control buttons on a buttress separating driver and passenger that can be awkward to use. However, the tablet-style infotainment screen, which is a close reach, has redundant on-screen controls that you can operate with your thumb while you steady your hand on the bezel.

A second display serves as the instrument cluster, which is configurable and framed by a squared-off steering wheel that stays below your line of sight as you look over the low dashboard and through the absolutely panoramic windshield. The over-the-shoulder views aren’t anywhere near as good, but the rearview mirror is equipped with a video feed, and if you turn your head all the way around you can see the engine behind the window. It’s a glorious sight.

Chevrolet

The Stingray is powered by GM’s latest 6.2-liter pushrod V8. Yes, pushrods. Just like the Chevy Silverado. Except this one is presented in all of its mechanical glory with parts designed to be displayed under the humongous hood’s glass panel.

The V8 gains 35 horsepower over the outgoing version for 490 hp and has 465 lb-ft of torque to go with it. A toggle and pushbutton-controlled 8-speed dual-clutch automatic transmission is standard and the only type available, but it does come with paddles behind the wheel that let you shift gears manually. If you pull them both at the same time it instantly switches to neutral so you can rev the engine for your audience. There will always be one, because the Stingray’s chiseled body has all the presence and drawing power of a million-dollar exotic.

The $5,000 Z51 performance package on my test car tweaks the engine to 495 hp and 470 lb-ft and adds extra cooling for the engine and transmission, a track-oriented suspension tune, downforce-producing rear wing and body extensions, larger Brembo brakes, a limited-slip rear differential and a set of sticky summer tires.

The car was also equipped with GM’s Magnetic Ride Control adjustable shocks, which are worth it on any model they are available on, from trucks to sedans, even for the $1,895 they cost here. Just as valuable, but for a very different reason, is the optional $1,495 hydraulic system that raises the Stingray’s pointy nose 2 inches to avoid scrapes and can be programmed to do that automatically as you approach up to 1,000 marked locations where you often drive.

Although billiard table-smooth roads are preferred, a Stingray configured like this and set to Tour mode can be used as a daily driver on the most wretched pavement, even with its ridiculously low-profile tires and staggered 19- and 20-inch wheels. The car just glides over them with no shakes, rattles, rolls or flexes. But the Stingray can flex when you want it to.

Chevrolet

Drop the hammer and 60 mph arrives in about 2.9 seconds without any wheel spin, according to Chevrolet. That’s thanks in part to the 40/60 weight distribution provided by the mid-engine design and the Stingray’s excellent traction management system. It’s nearly as quick as the old front-engine 755 hp Corvette ZR1, which was a big part of the reason Chevy made the switch.

The other becomes apparent when the road gets curvy. Moving the weight between the wheels improves steering response and helps neutralize the handling, which is like a slot car’s up to the limit. I didn’t get the opportunity to find out what happens when you go past it, but I can tell you that there is a long way to go to get there.

The Stingray plays good music while you do all this. Jucther said refining the engine sound with it located right behind your ear was one of the tougher challenges posed by the layout.

“The nice thing about a front-engine car is that you’ve got induction noise in the front and the exhaust pipe in the back, so you’ve got a kind of stereo,” he said. All I can say is: expert-level challenge complete.

The transmission can be a little lazy to shift in Tour but rips through the gears and always picks the right one in the Sport and Track modes, which also adjust the throttle response and firm up the suspension and steering feel. You can customize everything to your liking and engage your settings with a Z-mode button on the steering wheel if you prefer.

Chevrolet

The reimagined Stingray now nearly exists in a class by itself. The cars closest to it on price and execution are the mid-engine Porsche 718 and the rear-engine Porsche 911, but neither are quite the same thing. As far as six-figure, mid-engine cars like the Audi R8, Acura NSX and Lamborghini Huracan are concerned, despite their power advantage and all-wheel-drive, I’d be hard-pressed to give you a truly good reason to spend triple your money on one.

Those arguments won’t even hold much longer against the Corvette, because you know there are much more powerful models on the way. Juechter won’t even hint at how much, but word on the street is that 800-1,000 hp isn’t out of the question, possibly with an electric boost. Based on the Stingray’s performance, the platform has plenty of room to grow.

But regardless of what’s to come, the car on sale today makes one thing perfectly clear:

This Detroit city automaker still knows how to rock.

———-

2020 Chevrolet Corvette Stingray

Type: 2-passenger, 2-door, rear-wheel-drive coupe

Base price: $59,995

As tested: $80,315

Engine: 6.2-liter V8

Power: 495 hp, 465 lb-ft

Transmission: 8-speed dual-clutch automatic

MPG: 15 city/27 hwy

Gary Gastelu for Fox News


C8 Corvette’s Two Coolest Options Make A Comeback

After a months-long absence, the High Wing Spoiler and Carbon Fiber Ground Effects package are coming back.

Many 2020 Chevrolet Corvette customers were dismayed, to say the least, when they learned that the car they would receive wouldn’t quite match the order they’d put in. Apparently, GM underestimated how popular big wings are among sports car enthusiasts.

But get ready to do your happy dance, because GM is bringing both options back as production changes over from 2020- to 2021-model year cars

At the recent Corvettes at Carlisle, Product Manager Harlan Charles shared a sketch of the Corvette team’s new IMSA and Indy 500 pace cars, taking the time to highlight some of its genuine Chevrolet accessories, including a mix of current and future parts. Notably, the car wore both the High Wing Spoiler and the Carbon Fiber Ground Effects package.

“Ground effects and the high wing are going to be coming back available soon,” he confirmed.

2021 Chevrolet Corvette buyers will soon have the option of getting a high wing and carbon ground effects from the factory. Of course, those parts can always be ordered later after taking delivery – assuming they’re available.

Another genuine Chevrolet accessory on the IMSA pace car, never before offered by the manufacturer for the C8, is a new Corvette Racing “Jake” hood stinger stripe. The “Jake” is the official logo of the Corvette Racing Team, taking the appearance of a skull-like racing helmet with the crossed-flags Corvette logo where the eyes should be. The hood stinger strip will join other Jake-branded accessories available for the C8, including wheel center caps, all-weather WeatherTech floormats, and a premium indoor car cover with C8.R livery.

Aaron Brozozwski; Carbuzz


There’s Good News For Anyone Wanting A New Corvette

2020-2021 Chevrolet Corvette C8 Front View

Building enough to meet demand is key.

The era of the C8 Chevrolet Corvette got off to a rocky start. First, there was the five-week-long UAW strike against GM. And then came the coronavirus pandemic. As a result, not every 2020 Corvette order can be fulfilled. To help settle down anxious buyers who missed out this year, Chevrolet decided not to increase the 2021 Vette’s base price and those customers are now first in line. But there’s still one very specific way Chevy can boost C8 production that it has yet to do: add a second production shift.

According to Corvette Blogger, the Bowling Green, Kentucky Corvette plant has just initiated that second shift. These second shift workers had been in training alongside their first shift colleagues for some time before the pandemic struck.2020-2021 Chevrolet Corvette C8 Front Angle View2020-2021 Chevrolet Corvette C8 Side View2020-2021 Chevrolet Corvette C8 Rear-Facing View

The factory shut down delayed their training. But now they’re up and running, although not quite at full capacity because plant managers are still in final coordination with supply chain vendors to guarantee a steady flow of parts. Fortunately, these managers anticipated such a scenario months ago and decided to stock up on extra parts beforehand.

However, not all vendors are back to normal operating conditions and management isn’t too wild about dipping into their extra parts supply just yet. It’s best to give suppliers a bit more time because once those extra parts are used up, that’s it.Best Cars For City Driving In 20206 Performance Models Ford Needs To Bring Back

2020-2021 Chevrolet Corvette C8 Engine Bay

The Cor

2020-2021 Chevrolet Corvette C8 Engine Bay

vette Assembly Plant can reportedly build 95 Corvettes per shift, but employees have been working especially hard lately by dedicating more hours to increase that figure to about 116 cars per day. Once the second shift fully comes online along with zero supply chain issues, at least 190 vehicles per day can be expected. Last May, Chevy confirmed a total of 20,181 Corvette orders had been received and the initial plan was to build 20,000 units before the 2021 model year.

Obviously that isn’t happening now but the fact the second shift is now underway is a promising sign.

JAY TRAUGOTT  car buzz


2020 Chevrolet Corvette Road Test | The hype is legit

As close to perfection as it gets for the price

The $59,995 2020 Chevrolet Corvette exists. Chevy sent Zac Palmer from AutoBlog the Accelerate Yellow 3LT model which came to $86,860. Yet, after a week in the tight bucket seat, he’s still convinced it’s a bargain.

Raw performance, sophistication, luxury, price. Pick three, because combining all four of these elements in a sports car or supercar is like trying to find Waldo when he’s been torn out of the page. Chevy is turning this conundrum upside down with the new Corvette. Equipped properly, the C8 checks all four of the boxes emphatically.

Performance is a no-doubter. The 6.2-liter V8 makes 495 horsepower and 470 pound-feet of torque in this Z51 pack car, rocketing it to 60 mph in just 2.9 seconds via an excellent launch control system. The magnetic dampers make for a sophisticated ride and handling balance. It can go from forgiving and plush to racetrack stiff at the twist of a dial. The interior is more luxurious and tech heavy than anything else GM makes, save for a loaded-up Cadillac. And then there’s the price. How Chevy priced this car below $100,000 still baffles me. Almost nothing is missing, but let’s dive in a bit deeper, starting from the best place to be: the driver’s seat.

undefined
undefined
undefined

Reaching beyond the highly-bolstered suede, leather and mesh Competition GT3 seats in this C8, everything I touch feels of quality. Yellow accents are splashed about the interior in thoughtful locations. Even the removable roof has yellow stitching woven in. Before I even get on the road, this attention to detail and level of customization reminds me of Porsche — the Chevy options are just cheaper. The spectacular view forward over a low nose keeps the Porsche theme on track, but it trails off when I begin to take in the interior design language around me. 

2020 Chevy Corvette 3LT interior
undefined
undefined
undefined
undefined
undefined
undefined
undefined
undefined
2020 Chevy Corvette 3LT interior
Image Credit: Zac Palmer

No car takes the jet fighter cockpit theme as seriously as the Corvette does. I’m cocooned in my own bubble, completely walled-off from the passenger, and the passenger from me. Wide, swooping armrests are swathed in suede and placed at perfect elbow-resting height. The square-shaped suede-covered ($595) steering wheel isn’t weird to use, but spokes at 9 and 3 would be preferable over their current 8:30 and 3:30 positions. My passengers kept accidentally adjusting my seat and temperature controls on the vertical climate control stack (driver on top, passenger on bottom), but I became accustomed to the design quickly. It beats putting the climate controls in a touchscreen.

undefined
undefined
undefined

The push-to-start button presses in with a satisfying click, but even more satisfying than that is tapping the remote start on the keyfob when standing near the loud pipes. Since the Corvette saves its drive mode from the last engine cycle, you can remote start your engine with the exhaust in Track mode (thank you to the engineers who did this). It is thunderous and guttural and all the things you want the startup to be.

undefined

The push-to-start button presses in with a satisfying click, but even more satisfying than that is tapping the remote start on the keyfob when standing near the loud pipes. Since the Corvette saves its drive mode from the last engine cycle, you can remote start your engine with the exhaust in Track mode (thank you to the engineers who did this). It is thunderous and guttural and all the things you want the startup to be.

The drive mode dial has proper heft, and the digital instrument cluster quickly animates through layouts with each new mode. Ergonomically, the interior is brilliant. My seating position is spot on with the seat set to its lowest point. Being able to see out the back with a standard mirror would be nice, but the digital rearview camera mirror on this car is a revelation for a mid-engine layout. You can see everything, and glare from taller cars’ headlights in the dark is a non-issue — even the driver-side mirror is auto-dimming. All this, and my butt and back are cool via the ventilated seats.

undefined
undefined

Setting out in Tour (comfort) mode, GM’s Small Block LT2 clacks away quietly behind my ear, sounding every bit like a Camaro or the previous Corvette. A thick piece of glass separates the cabin from the engine bay, allowing driver and passenger to look back at the pretty V8. It’s far more sedate and normal to cruise around in than you might imagine. The steering wheel flies left or right with ease at low speeds, the brakes are comfortable but not touchy, and those magnetic dampers are damping out the bumps. The big engine and eight-speed dual-clutch gearbox never fully fade into the background when casually driving around, but there’s no drama at low speeds. Ferraris or Lamborghinis never stop telling you what they are when cruising through town. If it weren’t for the incessant staring and pointing, I could’ve forgotten I was driving the hottest, most-anticipated car of the last several years. Credit to Chevy for making this beast so livable on a day-to-day basis.

2020 Chevy Corvette
undefined
undefined
undefined
undefined
undefined
undefined
undefined
undefined
2020 Chevy Corvette
Image Credit: Zac Palmer

Not to say the Corvette is quiet inside (it’s not), but that level of refinement in the cabin in casual driving isn’t always conducive to noise and personality when the right pedal is flat. Even with the supplemental exhaust noise being pumped into the cabin via the speakers, the Corvette isn’t as loud inside as I imagined it would’ve been with the performance exhaust. It’s opposite what’s going on out back, too. This Corvette sounds like NASCAR thunder from the roadside as it pounds through the forest, barking and snapping at each quick gear change. Problem is, the driver is only getting a fraction of this in their eardrums. I have a certain expectation for theater and aural wonder from a mid-engine car. The Corvette could use a tinge more of both.

Now, enough with the nit-picking. Power (so much of it) is simply here. It’s like a light switch. The speed at which this updated V8 revs — get the full download in our First Drive — is one pivotal aspect that stands out. Whether you’re banging through first and second or free revving for a demanding onlooker, it goes from idle to 6,500 rpm (redline) in a flash. The steady increase in shove keeps coming all the way to the top despite peak torque hitting at 5,150 rpm. 

undefined

There isn’t much fuss in the power band. Everything is business as usual if you’re accustomed to GM’s Small Block V8. It’s glorious in its simplicity, and brings a sense of normalcy to the gob smacking acceleration. I’m not wanting for any more forward thrust — there is zero letup at legal speeds — but I’m already looking forward to the shriek of the flat-plane crank Corvette headed our way soon. This engine is an ode to the traditionalists, but the flat-plane crank ‘Vette will be an ode to people like me who love high-revving, exotic engines.

undefined
undefined
undefined
undefined
undefined

Once I make it out to some proper driving roads, the brilliance of this chassis comes into plain view. It doesn’t feel like a company’s first go at a mid-engine supercar. No, it’s well-tuned and strikes a wonderful ride and handling balance the likes of which Porsche has been perfecting for years with the 911. The magnetic dampers on this car deserve many thank you notes. Turn-in is crisp and quick. The nose is happy to be pointed in a different direction at a moment’s notice, and there’s zero uneasiness coming from the rear end. As the Gs build, the Corvette remains a wonderfully balanced rock. I’m waiting for the rear end to step out on me as I apply more and more throttle coming out of turns, but it wriggles, then sticks with the weight of the engine keeping it planted. This car will happily go sideways if you intentionally goose it, but it’s incredibly well-behaved when speed is the priority.

The steering weight is just about perfect in Sport mode, but turns a smidge too heavy in Track mode. Bumps and bigger undulations in corners are shrugged off. I can feel what’s going on at the wheels through the seat and steering wheel, but the Corvette reassuringly trucks on without skipping a beat. Lesser chassis will bound around and send the car skipping on my testing roads, but the Corvette handles them like a champ. The $1,895 you spend on these dampers will be the best $1,895 you ever spend.

undefined

A manual transmission is the only item missing. My tester car may be supercar-quick, but it’s not too much of a handful that a manual would ruin the experience. Take the three-pedal version of the 911 Carrera S as an example. It may be slower to 60 mph than the PDK, but the car is still plenty drivable and doesn’t turn into some hot mess with too much horsepower. I think there’s room for a manual to work the same way in the Corvette. This is no condemnation of the eight-speed dual-clutch transmission in the Vette today, though. It’s as quick to respond as the best of them. If Porsche held any advantage here it would be in smoothness, as the Corvette is less refined in manual mode when you’re not pushing. I’d move the paddles up by about an inch, too, since they’re just out of reach at my preferable 9 and 3 hand position.

undefined
undefined

It’s staggering what Chevy put together here — nothing less than a generational milestone. The last no compromise supercar that truly shook the segment up was the 1991 Acura NSX, but even the NSX was pricey. Chevy’s new Corvette is just as important, but in a different way. McLaren and Ferrari buyers will keep buying McLarens and Ferraris. Lamborghini isn’t going to make a budget model. This car won’t force the old guard to change what they did the way Honda did in the 1990s. No, what the new Corvette does is bring that exotic level of performance to a price bracket that’s never had this opportunity before. It’s a supercar for the people, assuming the people have over $60,000 for a toy. But don’t worry; in three years depreciation will have them down in the $40,000 range.

undefined
undefined
undefined
undefined
undefined

Raw performance, sophistication, luxury, price. Somehow, all four deliverables are present and accounted for. At $59,995, nothing can beat it. At $86,860, nothing can beat it. The Small Block isn’t holding this car back from greatness — it’s already great with it. But this chassis, and the car as a whole, begs for more. More character, more revs and an exotic yowl that matches the chassis’ greatness. When Chevy adds such an engine, the Corvette can transcend beyond the performance bargain moniker to being one of the greatest of all time. It’s nearly there already.

Related Source: AutoBlog


Corvette Ranks in Top 10 of Most Awarded Cars from KBB

2020 Chevrolet Corvette Stingray
2020 Chevrolet Corvette Stingray
Photo: Chevrolet

Auto experts and journalists spend hours and hours evaluating every aspect of a vehicle so you have a road map to the models that will work best for you. The Chevrolet Corvette repeatedly rises to the top of lists and brings home the awards. According to the editors at Kelley Blue Book, the 2020 Chevrolet Corvette is one of the pub’s 10 most awarded cars of 2020.


Prestigious Win: Corvette Stingray named MotorTrend Car of the Year


The 2020 Chevrolet Corvette earned the seventh spot on the KBB list.

Primis Player Placeholder

“When it was unveiled, the all-new mid-engine 2020 Chevrolet Corvette nearly broke the internet,” writes KBB writer Allyson Harwood. “Its supercar styling and power numbers were impressive, but its incredible resale value data and bargain starting price make the Corvette far more than just an excellent sports car.”

Corvette attracting younger drivers
2020 Chevrolet Corvette Stingray
Photo: Chevrolet

The 2020 Chevrolet Corvette relishes a top speed of 194 miles per hour and thunders across the pavement with the strength of 495 horsepower and 470 lb-ft of torque. In a blink of an eye, approximately 2.9 seconds, the 2020 Corvette hits 60 mph.


Available Now: 2020 Chevrolet Corvette


In addition to KBB’s honors and praise, the 2020 Chevrolet Corvette earned the 2020 North American Car of the Year title and a Wards Auto 10 Best Award for the interior. The Chevrolet Corvette Stingray took home the 2020 MotorTrend Car of the Year award. The Detroit Free Press gave the Chevrolet Corvette C8 its inaugural title of Car of the Year. It is a 2020 Car and Driver 10Best and a 2020 Edmunds Top Rated Award winner in the sports car category. KBB recognized the Corvette’s value, giving it a 2020 KKB.com Best Resale Value award.

Source: DeAnn Ownes; TheNewsWheel


Tadge Juechter Shares Key Fob Changes as GM Pushes C8 Frunk Update to Dealers

[VIDEO] Tadge Juechter Shares Key Fob Changes as GM Pushes C8 Frunk Update to Dealers

Since last week’s recall notice regarding the 2020 Corvette’s frunk issue, which then led to Chevrolet issuing a Stop Delivery Order, we’ve been waiting anxiously for the news of when the over-the-air updates would begin.

GM told us that engineers were working around the clock on this issue and today they notified dealers that an update will be available tonight. General Motors will then rollout the customer updates shortly afterward.

After several YouTube videos caught the Corvette’s frunk suddenly opening, the Corvette Team has determined that it’s caused by customers inadvertently opening the frunk via the key fob or interior release buttons and then missing the audio and visual warnings when they put the car in drive. We’ve noted in the videos that the cars are going at least 40 mph when the wind catches the frunk lid, lifting it all the way back and causing damage to the hinges and paint.

To explain the update, Corvette Chief Engineer Tadge Juechter shares this video showing the reprogramming of the key fob’s frunk button. The update changes the pattern so that it’s less likely to be inadvertently pressed causing to the frunk to open while the fob is in your pocket.

The recall update also updates the maximum speed at which you can drive with the frunk open to 26 mph, down from the 82 mph it is set at currently.

The Stop Delivery Order issued last week paused the deliveries of most 2020 Corvettes at dealerships and at the Corvette Museum. Once they receive the update, they can be released to customers. GM will also resume shipping vehicles from the Corvette Assembly Plant in Bowling Green once they have been updated as well.

Here is the official statement from Chevrolet:

General Motors has decided to voluntarily recall certain 2020 model-year Chevrolet Corvette vehicles for a potential issue with the vehicle’s front trunk lid.

If drivers ignore the vehicle’s visual and audible warnings that the front trunk lid is open, they can drive the vehicle in that condition at speed, which could increase the likelihood that the wind force is sufficient to inadvertently flip open the hood.

GM will update the software in the vehicles’ Body Control Module (BCM) to limit vehicle speed to 26 mph when the hood is not completely closed and latched. The software update will also provide a driver information center message indicating that the top speed is limited to 26 mph. In addition, the operation of the hood release on the key fob will be modified to reduce the likelihood of inadvertent hood release actuations. The interior door trim switch and release button located inside the front trunk compartment are also modified to require a longer press-time.


Source:
Chevrolet.com & Keith Cornett


2022 Chevrolet Corvette Z06: What We Know About the Twin-Turbo Super-’Vette

The Z06 is coming and it’ll be motivated by a powerful, twin-turb o V-8 engine.

MotorTrend StaffPhotosManufacturer Photos

If the Chevrolet Corvette Stingray‘s nearly 500-hp V-8 engine fails to entice you, then the forthcoming Corvette Z06‘s 650-hp V-8 ought to do the trick. And it’s not just the horsepower output that’s changed. The Z06’s engine will be an entirely different animal from its lesser sibling, increasing performance and bringing an entirely different character to the car. Read on to find out why.

2022 Chevrolet Corvette Z06: Twin-Cam, Twin-Turbo, Flat-Plane

Unlike the LT2 engine of the Stingray, the Z06’s V-8 will forgo pushrod valves and a cross-plane crank for dual-overhead cams and a flat-plane crank. The resulting engine should possess the rev-happy nature and aural thrills of the Corvette C8.R’s V-8, which also happens to use twin cams and a flat-plane crank.

Corvette C8 Z06 front three quarter

While Chevy will not drop the C8.R’s 5.5-liter engine into the Z06, the two Corvettes’ V-8s are expected to share a number of common pieces. The Z06’s V-8 should be smaller than its race car kin, reportedly sharing parts (and perhaps its entire block) with Cadillac’s Blackwing V-8 engine.  We’d wager it’ll ultimately displace in the neighborhood of 4.2 liters. V-8s using flat-plane crankshafts lack the natural balance of a cross-plane crank, and larger displacements exacerbate the vibration and harshness of this arrangement. By limiting the displacement, employing lightweight pistons, and using a short-stroke crank, we expect the Z06 to be tolerable for owners who regularly drive their cars in traffic.SPONSORED CONTENTValvoline. The Original Motor Oil.By Valvoline

To compensate for its lesser displacement, the Z06’s engine is due to adopt a pair of turbochargers. Unlike Cadillac’s Blackwing engine, which houses two turbos in the valley between its heads, the Z06’s V-8 is expected to rely on outboard-mounted turbos. All in, the high-performance Corvette model purportedly produces 650 hp. Like the Stingray, look for the Z06 to rely on an eight-speed dual-clutch automatic gearbox to send all those horses to its rear wheels. Revisions to the car’s suspension and a set of sticky summer tires—that are properly wide at the rear—are sure to keep the Z06’s power from overwhelming its drive wheels and chassis.

2022 Chevrolet Corvette Z06: Carbon Fiber Fever

In addition to the added power, the 2022 Corvette Z06 will welcome a number of weight-saving measures. Don’t worry, creature comforts will still abound, and there’s no indication the Z06 will ditch the likes of the Stingray’s large digital gauge cluster or touchscreen infotainment system.

Nevertheless, look for the model to feature a number of lightweight materials for items such as the exhaust, rear wing, front splitter, and even its wheels. Specifically, the 2022 Corvette Z06 will offer buyers the option to equip it with a set of carbon-fiber wheels. While such a setup is not new (vehicles from Porsche and Ford offer carbon fiber wheels), it’s still a relatively rare—and surely expensive—way for road-going cars to go about shedding mass. 

2022 Chevrolet Corvette Z06: Shut Up And Take Our Money!

Although we hear the current pandemic is forcing Chevy to push back the Corvette Z06’s debut, we’re still hopeful the brand manages to take the wraps off the car in early 2021 and ship it to dealers before the end of the year as a 2022 model. That said, it’s possible the Z06 won’t arrive until sometime in 2022 as a 2023 model. 

Regardless, prepare to spend a good chunk more change to get into the car. Frankly, we’ll be surprised if the Z06 stickers for anything south of $80,000. That’s pricey for a Corvette (consider the Stingray starts at $59,995). Still, compared to the 572-hp Porsche 911 Turbo, which starts at more than $170,000, the Z06 is sure to be a relative steal given its performance capabilities. 

Greg Fink


Corvette Scores Fourth Straight Win; Auberlen Makes History

Rick Dole/ IMSA

Antonio Garcia, Jordan Taylor hold on for Corvette Racing’s fourth straight win…

Corvette Racing has scored its fourth consecutive IMSA WeatherTech SportsCar Championship class victory following late-race drama for Porsche in Saturday’s Michelin GT Challenge at Virginia International Raceway.

Bill Auberlen, meanwhile, became the winningest driver in IMSA history with a long-awaited victory in GT Daytona.

Antonio Garcia limped the No. 3 Chevrolet Corvette C8.R to the win in the two-hour and 40-minute GT-only contest despite a loose floor on his mid-engined machine.

Garcia took over the lead when the pole-sitting No. 911 Porsche 911 RSR-19 of Nick Tandy was forced into the pits due to a left-rear tire issue with 18 minutes to go.

Co-driver Fred Makowkecki had rebounded from an early left-rear puncture to take over the lead thanks to a fuel-only stop during the race’s second full course caution.

A pit lane miscue with tightening the right-rear wheel saw Jordan Taylor lose time during the same round of stops but benefitted from misfortunes from both CORE autosport-run Porsches.

The No. 912 car of Earl Bamber battled a loose diffuser, caused by contact with the No. 25 Team RLL BMW M8 GTE of Connor De Phillippi, relegating the defending GTLM champions to a fifth place class finish after multiple stops for repairs.

Tandy and Makowiecki ended up finishing third, despite the Englishman nearly getting around the No. 25 BMW of Bruno Spengler on the final lap.

Up front, it marked Garcia and Taylor’s third win in the last four races and has extended their championship lead. 

The No. 4 Corvette of Tommy Milner and Oliver Gavin, who had an off-course excursion with 1 hour and 32 minutes to go, came home fourth in a race that saw nearly every GTLM car hit trouble.

It included the No. 24 BMW, which lost nearly 20 laps in the opening hour due to a mechanical issue.

Auberlen Makes History With 61st IMSA Win

Turner Motorsport claimed top class honors in GT Daytona, with Auberlen and Robby Foley winning for the first time in nearly a year.

Foley led from the early stages of the race before handing over the No. 96 BMW M6 GT3 to Auberlen with one hour to go.

While coming under attack from the No. 86 Meyer Shank Racing Acura NSX GT3 Evo of Mario Farnbacher, a mistake by the German under braking into Turn 1 initially dropped him to fourth.

Farnbacher managed to charge his way back to second, getting by the No. 48 Paul Miller Racing Lamborghini Huracan GT3 Evo of Bryan Sellers on the final lap through traffic.

Auberlen, meanwhile, became the most successful driver in IMSA competition, with his 61st win.

It marked Turner’s first class win since Motul Petit Le Mans last year when Auberlen tied Scott Pruett with all-time wins at 60.

Sellers and co-driver Madison Snow completed the GTD podium in third, ahead of the No. 74 Riley Motorsports Mercedes-AMG GT3 Evo of Gar Robinson and Lawson Aschenbach, who was in the fight for second in the closing laps.

The No. 14 AIM Vasser Sullivan Lexus RC F GT3 of Jack Hawksworth and Aaron Telitz completed the top-five in class.

RESULTS: Michelin GT Challenge


Chevrolet Has Built 1,750,000 Corvettes

The 1,750,000th Corvette is white and red, paying tribute to the 1953 original. It’ll be raffled off later this year.

NATIONAL CORVETTE MUSUEMFACEBOOK

Last Friday, without much fanfare, Chevrolet built Corvette No. 1,750,000. It’s an Arctic White coupe, with an Adrenaline Red interior—a spec paying homage to the 1953 Vette—and there’s a chance it could be yours.

The National Corvette Museum announced last month that this particular Corvette would be raffled off, and it’s selling 1500 virtual tickets at $200 a pop. A drawing will be held on September 4, and until then, Corvette #1,750,000 will live in the Museum alongside the millionth (a 1992 convertible) and the 1.5 millionth (a 2009 convertible) Vettes. Hopefully this one doesn’t end up in a sinkhole. All the proceeds from the raffle will be donated to the Museum.

Corvette No. 1,750,000 is extremely well equipped. It’s got the 3LT package along with the must-have Z51 Performance Pack, a front-end lift, the Engine Appearance Package, and a handful of other options. It’d cost you at least $81,000 to order a similar 2020 Corvette, so suddenly, a $200 raffle ticket doesn’t seem like such a bad deal.

corvette 1,750,000

NATIONAL CORVETTE MUSEUM FACEBOOK

Given that the very first Corvette was built on June 30, 1963, it took Chevrolet 67 years, one month and 15 days to build 1,750,000 examples. Not bad for a sports car. For context, it took Porsche 53 years to build a million 911s, and Mazda 26 years to produce its millionth Miata. Ford has built over 10,000,000 Mustangs, but that’s not a true sports car like a Corvette. Nissan reached the million Z-Car milestone sometime in the early Nineties, but even still, the Corvette has to be the most popular sports car of all time.

“This type of milestone only comes around every 10 or so years for Corvette,” said Kai Spande, head of the Bowling Green plant. “For this landmark achievement to also be one of the early mid-engines is just awesome for us and for our customers. It’s an amazing time to be part of the Chevrolet brand.”

At the time of writing, 400 raffle tickets remain, so if you want to own a landmark Corvette, get your credit card out. We’ll check back in when Chevy builds its 2 millionth Corvette.

Via, Road&Track


First 2020 Corvette Convertible Arrives at Chevy Dealers


This Is Likely the Mid-Engine Flat-Plane V-8 Corvette Z06 Testing Out in the Open

That certainly sounds like a flat-plane engine.

The Corvette switching to a mid-engine layout is huge news, but it’s not the only major change happening with the car. In October, Chevy revealed the race-ready C8.R, now packing a naturally aspirated 5.5-liter flat-plane crank V-8 engine—a big step away from the pushrod V-8s found in the new road car and last-generation race car. A Chevy engineer confirmed the engine would make its way to a road-going Corvette, and this test car is likely it.

GMAuthority.com managed to snag a video (above) of what seems to be the next-generation Z06 accelerating through the entrance of General Motors’ Milford Proving Grounds back in June. The car’s looks aren’t what interests us—it’s the sound. Unlike the normal Corvette, which has a traditional, deep pushrod V-8 noise we’re familiar with, this one sounds more like the flat-plane C8.R. It has more in common sound-wise with a Ferrari 458 than it does with any Corvette.

Though Chevy hasn’t officially confirmed it, the dual-overhead-cam flat-plane V-8 will likely be the engine powering the C8 Z06. In the race car, it uses direct injection, and makes around 500 horsepower and 480 lb-ft of torque, according to engineers. It’s expected to make more in the road car. We’re curious to see what Chevy has in store.

This isn’t the first time we’ve heard this engine. Back in January, Facebook user Jim Lill shared a video (below) to the C8 Corvette Owners group showing what looks to be a heavily camouflaged Corvette testing in the mountains east of San Diego on a cloudy afternoon.

Though Chevy hasn’t officially confirmed it, the dual-overhead-cam flat-plane V-8 will likely be the engine powering the C8 Z06. In the race car, it uses direct injection, and makes around 500 horsepower and 480 lb-ft of torque, according to engineers. It’s expected to make more in the road car. We’re curious to see what Chevy has in store.

Brian Silvestro for Road and Track


KISS Guitarist Paul Stanley Loves His C8 Corvette Stingray

With its exotics looks, mid-engine layout and near 500 horsepower V8 engine, the C8 Corvette Stingray was always going to be a car that attracted rock stars, professional athletes and actors and actresses as owners.

Among the celebrity owners of the new C8 Corvette is KISS  rhythm guitarist and co-lead vocalist Paul Stanley. In a post shared with his Facebook fans this week, Stanley had the following to say about his new mid-engine ‘Vette:

“For years the auto industry said “Buy American” (and) I said ‘when you manufacture world-class cars I’ll buy them.’ For me the 2020 Corvette C8 is beyond that. It raises the bar with cutting edge technology. It’s a machine I’m proud to drive AND it’s drop dead GORGEOUS. I LOVE mine!”

Stanley’s C8 Corvette appears to be a Summit White model with the Morello Red interior upholstery and black 5-spoke trident wheels. He also appears to have equipped the ‘Vette with the available Bright Red brake calipers and Carbon Flash painted mirrors but opted against the Z51 performance package, judging by the lack of the lower front splitter.

While Stanley indicates that he has avoided owning American cars in the recent past, this isn’t the first time his name has been associated with the iconic Chevrolet Corvette. Back in 2014, Stanley worked with Chevrolet Accessories to develop the 2015 Corvette Stingray Paul Stanley Concept, which featured candy red exterior paint, a silver painted roof, a silver grille insert, quilted parchment leather seats and more. At the time, Stanley said the C7 Corvette was“undeniable in terms of its aesthetics,” and “a world-class piece of machinery.”

Paul Stanley Edition Corvette

At the time, Chevy’s vice president for performance vehicles and motorsports, Jim Campbell, said Stanley’s passion for cars made him an easy fit for the 2014 collaboration.

“It was great working with Paul Stanley, because of his vision and passion for design and automobiles,” Campbell said.

So there you have it, not only is Paul Stanley a fan of the C8 Corvette – he liked the sports car so much he decided to put one in his garage. 

Source: SAM MCEACHERN


2020 Corvette Stingray is the Official Pace Car of the 104th Indianapolis 500

2020 Corvette Stingray is the Official Pace Car of the 104th Indianapolis 500


We’ve been expecting to hear this news and finally today it has been confirmed by Chevrolet that the new 2020 Corvette Stingray will be the official Pace Car of the 104th Indianapolis 500. This marks the 17th race that Corvette has served as the official Pace Car, and the 31st Chevrolet to lead the field.

This year’s running of the Indy 500 will take place on Sunday, August 23 with the race being shown live on NBC.

With no fans allowed in attendance this year due to the COVID-19 pandemic, the official pace car driver will be GM President Mark Reuss.

2020 Corvette Stingray is the Official Pace Car of the 104th Indianapolis 500


“It’s truly an honor to have the opportunity to be behind the wheel of the mid-engine Corvette Pace Car at such a historic race as the Indy 500,” said GM President Mark Reuss. “The 2020 Corvette Stingray is the result of a close collaboration between the Corvette Racing and production engineering teams, setting a new benchmark for supercars around the world.”


The 2020 Corvette Stingray Pace Car is Torch Red and features the high Wing Spoiler and ground effects package. The Z51 Coupe will also wear the 104th Indy 500 livery on the doors. The new 2020 Stingray is capable of accelerating from 0-60 in 2.9 seconds and has a top speed of 194 mph, so it should have no trouble in setting the pace for the IndyCar racers.

2020 Corvette Stingray is the Official Pace Car of the 104th Indianapolis 500


“This is a continuation of our outstanding partnership with Chevrolet,” Indianapolis Motor Speedway President J. Douglas Boles said. “We’re so grateful for all that Chevrolet has contributed to the success of our events. The Torch Red 2020 Corvette Stingray is a world-class machine rich with speed, performance and excitement, perfectly suited to pace the ‘500′ field.”

Chevrolet has been linked to the Indianapolis Motor Speedway with both entities founded in 1911. Company founder and namesake Louis Chevrolet and his brothers Arthur and Gaston raced in the early 500-mile races with Gaston winning the race in 1920. Today, Louis Chevrolet rests in peace in a local Indianapolis cemetery just 15 minutes away from the track.

2020 Corvette Stingray is the Official Pace Car of the 104th Indianapolis 500
2020 Corvette Stingray is the Official Pace Car of the 104th Indianapolis 500

Update

This afternoon we came across this Facebook post from Corvette Exterior Design Manager Kirk Bennion sharing these words from fellow GM designer Adam Barry who led the project. The 2020 Corvette Pace Car features a number of items from Genuine Corvette Accessories as discussed:

2020 Corvette Indy 500 Pace Car


Source:
Indianapolis Motor Speedway


Open-Throttle Therapy Awaits In A 2020 Chevy Corvette Z51

A small donation to Ronald McDonald House could permanently put you in the driver’s seat of the fastest production Corvette yet!

Commonly referred to as “America’s Sports Car”, the Chevrolet Corvette has been offering thrills since its big unveiling back in 1953. With 60 years of production over eight generation designs, the all-new C8 Corvette is a game-changer. For the first time, the model is powered by a mid-mounted V8 engine. Even the C8’s body was drastically redesigned for aerodynamics, but stunning enough to stop car enthusiasts dead in their tracks. Get get your hands on the fastest production Corvette yet – a 2020 Chevrolet Corvette Z51 with 3Lz trim. A small donation to the Ronald McDonald House will enter you into the drawing for this incredible C8. Enter the code WIN here to receive double entries!

<img src="2020-corvette.png" alt="2020 Chevrolet Corvette Z51 being offered through Ronald McDonald House">
Ronald McDonald House

Finished in a stunning Elkhart Lake Blue Metallic, the exterior is nothing short of magnificent. On all four corners sit staggered 5-spoke Carbon Flash-painted aluminum wheels (19-inch front, 20-inch rear) wrapped with sticky Michelin Pilot Sport 4S rubber. Further complementing the exterior is the addition of a high-wing Carbon Flash rear spoiler and an exposed carbon fiber ground effects kit. Open the doors to a stunning black interior that features carbon fiber trim and GT2 bucket seats.

​Powered by a mid-mounted 6.2-liter LT2 V8 engine with an appearance package, the new C8 generates 495-horsepower and 470 lb/ft of torque that can propel this car from 0 to 60 miles per hour in a lightning quick 2.9 seconds. Sending that power down to the rear wheels is an 8-speed Dual Clutch automatic transmission. The Z51 Package gives this aggressive Corvette a unique Z51 adjustable performance suspension, an electronic limited-slip differential, an altered axle ratio, large Z51 Brembo brakes, a sport exhaust, enhanced cooling, and improved traction.

If you’re looking for a car that is can drive to the track, smoke the competition, and then drive home, look no further than this performance-oriented 2020 Chevrolet Corvette Z51. Even if the track isn’t your thing, this would make one head-turning daily driver. A small donation to the Ronald McDonald House will enter you into the drawing for this incredible C8. Enter the code WIN here to receive double entries! The Ronald McDonald House helps support families to stay close to their child while they receive treatment at a local hospital.

*Actual Corvette may vary from images above based on availability.*

Sign up for the Motorious Newsletter. For the latest news, follow us on FacebookTwitter, and Instagram.

Amie Williams for Motorious


2020 Corvette Convertible Production Officially Kicks Off Today

2020 Corvette Convertible Production Officially Kicks Off Today
Photo Credit: Chevrolet


It’s been a long time coming, but today we received confirmation that the first 2020 Corvette Convertibles have started production. The plant has been building convertibles for the Captured Test Fleet for the last few months so it’s not anything new to the production team, but it is great news for buyers who have been patiently waiting for this day to come.

We have been reminded that Convertible production will see a ramp-up so expect quantities to be small in these first few weeks before gradually expanding into its regular production schedule.

We are also expecting a quality-control hold on these first batches of the HTC, but I doubt it will be too long. It would be very cool to see a customer-ordered convertible showing up later this month at Corvettes at Carlisle or the NCM’s Anniversary Show, so let’s keep our fingers crossed!

The 2020 Corvette Convertible is our favorite model of the two and we can’t wait to see those happy customers showing off their rides. We expect the number of videos on youtube showing the hardtop convertible’s operation to grow exponentially in next few months so brace yourselves for that!

That’s the latest we have on the Convertible C8 Corvette…stay tuned for any updates or news we can pass along! For a recap of all things related to the C8 Corvette Stingray Convertible, just hit this link to check out our previous stories on the HTC.

Keith Cornett for Corvette Blogger


Corvette Racing at Road America: Another Wild 1-2 Finish for Corvette C8.R

By Corvette Racing -Aug 2, 2020

Corvette Racing at Road America: Another Wild 1-2 Finish for Corvette C8.R


Garcia, Taylor take second GTLM win of season; Gavin, Milner finish as runners-up

ELKHART LAKE, Wis. (Aug. 2, 2020) – Corvette Racing took its second consecutive 1-2 finish in the IMSA WeatherTech SportsCar Championship’s GT Le Mans (GTLM class) following a chaotic finish Sunday at Road America. Antonio Garcia and Jordan Taylor won for the second time in their No. 3 Mobil 1/SiriusXM Chevrolet Corvette C8.R following a late-race pass in torrential rain.

Oliver Gavin and Tommy Milner placed second in the sister No. 4 Corvette C8.R. It was the eighth victory at Road America for Corvette Racing, and the team’s first there since 2016. Garcia and Taylor both won for the first time in their IMSA career at Road America and extended their points lead to 10 in the class. Gavin and Milner unofficially moved to third in the standings.

Chevrolet also grew its lead in the GTLM Manufacturer’s Championship to eight points. Corvette Racing has now won three consecutive races in the category.

Corvette Racing at Road America: Another Wild 1-2 Finish for Corvette C8.R


Things weren’t looking positive for the first half of the race. Taylor, who qualified second, led early but the expected tire degradation reduced the pace for the GTLM cars. Adding to the problems for the team were electronics issues on the No. 4 Corvette that left both Gavin and Milner without traction control.

The predicted rain for the race came with just under an hour to go. Garcia, who took over with two hours left in the race, was the first GTLM runner to pit for rain tires and stopped from sixth place. Two other GTLM cars followed suit but three others stayed out, including the then-leading Porsche which skidded off-track during a downpour at Turn One.

Corvette Racing at Road America: Another Wild 1-2 Finish for Corvette C8.R


Milner remained on slick tires during the first deluge as officials halted the race with 43 minutes left. The rain let up initially before cars returned to the track with about 25 minutes to go once the red flag was lifted. Following the final pit stops for wet tires, racing resumed with seven minutes left and Garcia in second place.

An even more intense rain began to fall with just minutes left in the two-hour, 40-minute race. Garcia was locked in a back-and-forth duel with Porsche’s Nick Tandy just before the GTLM leader and the third-place Porsche went off-track late in the lap. Both Garcia and Milner, who did a masterful job on a wet track with no traction control, were able to get through the chaos and took the checkered flag under a race-ending, full-course caution period.


Corvette Racing’s next event is the GT-only Michelin GT Challenge at Virginia International Raceway on Saturday, Aug. 22.

ANTONIO GARCIA, NO. 3 MOBIL 1/SiriusXM CHEVROLET CORVETTE C8.R – GTLM RACE-WINNER:

“It was super tough. Because of the wave-by, we were at the back of all the GTD cars. So the spray we had back there was amazing. It was impossible to see anything. The first thing was to go by a couple of LMP2 cars while fighting (Nick) Tandy to catch up to the 24 BMW. It was a very intense three laps. I knew from Sebring practice that the Corvette C8.R was really good in the wet, even if today was beyond wet! I had Nick all over me, and we had many times when we were together… almost just sailing together instead of racing together. I knew the Carousel and the Kink were going to be really bad, and the line I took on the previous lap seemed to work. Luckily enough for me it was the same and I was one of the few cars to make it through. It’s another 1-2 finish for Corvette Racing, which is amazing. It’s finally my first victory at Road America, so it’s been a very good weekend.”

WHAT DID YOU SEE OF THE BMW AHEAD OF YOU? DID HE SPIN ON HIS OWN? “The Carousel and the Kink were almost impossible to go through that part of the track. There is really nothing you can do there. It depends on the depth of the water. The Corvette C8.R survived it better than the rest. I don’t know if it was due to the race line I took. I was following the car behind me and saw the BMW lose control. The race still wasn’t done because I had to do another lap through there. It’s a credit to how good the C8.R is in the wet. Thanks to everyone at Team Chevy because this car seems to be working in all conditions.”

HOW IMPORTANT IS THIS WIN TO EXTEND YOUR POINTS LEAD? “We didn’t know starting the season how the C8.R would be. With the fourth at Daytona, we saw the potential of the car. Our team did a great job during the shutdown with fixing things that needed to be corrected. We’ve had a chance to win the last three races, and we’ve converted those. We need to keep putting pressure on everyone and make the rest of the field make mistakes. On our own, we need to be their in the end and maximize our points opportunities. The next one is VIR, where we have tested with the new Corvette. We will do what we can to keep this momentum and carrying on winning.”

JORDAN TAYLOR, NO. 3 MOBIL 1/SiriusXM CHEVROLET CORVETTE C8.R – GTLM RACE-WINNER:

“It was a wild day…very unexpected. The race started off strong for us. We took a different strategy to go with three stops from the beginning. Thankfully it worked out well with the timing the rain and track position. Antonio never gave up. It was a tough fight in tough conditions, but he did a great job of surviving for our second win of the year and third of the year for Corvette Racing.”

THIS RACE WAS ON THE NATIONAL NBC NETWORK. WAS THIS THE KIND OF EXCITEMENT THAT WAS GOOD FOR NETWORK TV? “It had a bit of everything. The start for me was exciting, and the battles were all good. I could see on the big screen across the frontstretch that the prototype battle was often exciting and had a little bit of everything with the strategies. The weather was a bit different for those who probably turn into NBC for NASCAR where they wouldn’t run in the rain. There were probably too many crashes for everyone’s liking, but the show was very exciting with the battle for the win at the end. You like to see that between the manufacturers.”

TALK ABOUT WINNING ON THE SAME DAY AS YOUR BROTHER (RICKY TAYLOR): “It’s definitely cool. I think this is the first time we’ve won on the same weekend. I know we’ve gotten a pole on the same weekend, but in all the years a win has never gone both our ways. It was cool to watch their battle at the end with the 10 car. I know my dad’s team hasn’t won here either, and we tried hard for many years.”

Corvette Racing at Road America: Another Wild 1-2 Finish for Corvette C8.R


OLIVER GAVIN, NO. 4 MOBIL 1/SiriusXM CHEVROLET CORVETTE C8.R – FINISHED SECOND IN GTLM:

“I take my hat off to the team every time for never giving up. It didn’t look like we were going to be finishing that high up in the dry. But as we all know, there was a chance of rain all around. In this part of the world when the rain comes, it comes big. You just have to take you chances and make the right calls at the right time. We got a little lucky with a few things, and ultimately the No. 3 Corvette made the right choice on the right tires at the right time. We didn’t quite get that break or make that decision at that time. But then as all the pit stops cycled through for that last restart, we knew we just had to flat-out race. Our car was compromised a little as we didn’t have any traction control as part of an electrical issue throughout the entire race that we couldn’t really get on top of it. I fought it all during my stints. I honestly don’t know how Tommy kept the car on the track when he driving around on slick tires behind the safety car. I mean… water that was three or four inches deep on slick tires with no TC was amazing. For us to come away, even with all the stuff that happened, with a one-two finish is pretty spectacular. Hats off to the team and the crew and also to the C8.R. It seems like it is a car that can live through some crazy circumstances and conditions on track and deals with it. It’s a very fine car.”

TOMMY MILNER, NO. 4 MOBIL 1/SiriusXM CHEVROLET CORVETTE C8.R – FINISHED SECOND IN GTLM:

“That was absolutely wild. We had kind of a tough day to start with, but it came back pretty well for us there at the end. Credit to the guys with their never-give-up attitude that Corvette Racing is famous for definitely paid off today. The conditions were unbelievably difficult. The call to stay out there on slicks just before the full-course yellow was just as much mine as it was the engineers. I thought it was the right thing to do to run one more lap to see how bad the rain was going to be. And it ended up being almost biblical in the amount of rain that came. In all the races I’ve done, this has been the most rain I’ve ever seen come down at one time. It was hard enough just keeping it on the track under yellow with slicks, and it was bad enough when it was still green just trying to survive. Then it went red flag so we had the opportunity to come in and change it to rain tires. That in itself was difficult. For me I knew I just needed to get to pitlane and survive. That was the name of the game there and see what happened at the end. Once we went green, it was the most difficult conditions I have ever driven in my life with the amount of spray and with traffic and having so many cars around. At times it felt like I was driving blind. I could have closed my eyes and would have had the same amount of visibility at that point. I just tried to use very bit of muscle memory and track knowledge I could as to where the track goes at certain points. In the end, luckily we just survived with a first and second for the team. The day didn’t start out well, but it ended as well as it could.”

(Not having traction control) “Because I didn’t have it from the time I got in the car, I had to manage it from the start. In the dry, it’s definitely difficult because you are trying to not use the rear tires too much. I felt like I did a decent job in that first run but driving in the wet without it makes it that much more difficult. To be honest, the Corvette felt really good in the wet. Even though we don’t have a lot of time in the wet, the guys made the right call with tire pressure. When the Michelin wet tires are new, they’re really good. That gave me the confidence early on to really push, get through traffic, and trust in the car and tire to find the fastest way around.”

Corvette Racing at Road America: Another Wild 1-2 Finish for Corvette C8.R


Source:
CorvetteRacing.com


2021 Corvette Pricing Released with Z51 and the E60 Front Lift Seeing Increases

2021 Corvette Pricing Released with Z51 and the E60 Front Lift Seeing Increases

Expected this week from the Corvette Team is the 2021 Corvette pricing schedule and its now available to dealers. A copy was leaked to the internet and now we can see exactly where GM will be raising prices of select 2020 options as well as setting the price for new options for the 2021 model year.

The Corvette Team made a promise back at the Virtual NCM Bash that base pricing would not change from the 2020 model year. That commitment includes the 1LT, 2LT, and 3LT pricing for the Stingray Coupe and Convertible. Those prices are unchanged* and are:

  • $58,900 – 1LT Coupe
  • $66,200 – 2LT Coupe
  • $70,850 – 3LT Coupe
  • $66,400 – 1LT Convertible
  • $73,200 – 2LT Convertible
  • $77,850 – 3LT Convertible

*Prices do not contain the mandatory destination fee of $1,095.

However, we did guess correctly that certain options would most likely be raised for the 2021 model year. These are the returning options from 2020 with the new 2021 Pricing. I have also included the 2020 pricing in parenthesis. The most popular options receiving a price increase are the Z51 Performance Package and the E60 Front Lift:

  • Z51 – Z51 Performance Package $5,995 ($5,000)
  • E60 – Front Lift $1,995 ($1,495)
  • 5DF – Black Trident Spoke Wheels $2,895 ($2,695)
  • 5JR – Carbon Fiber Mirror Covers $1,245 ($1,145)
  • RCC – Engine Cover in Red $525 ($495)
  • RCD – Engine Cover in Sterling Silver $595 ($495)
  • RIA – All weather Floor Liners $205 ($195)
  • CAV – Contoured Cargo Area Liners $145 ($135)

Based on 2020 Sales Data the Corvette Team released during the Virtual NCM Bash in late May, the Z51 Performance Package was ordered by 74% of buyers while the E60 Front Lift accounted for 58% of all Corvettes sold. The LPO Black Trident Spoke Wheels were only ordered by 14% of buyers.

Now for the options new to 2021, Red Mist Metallic Tintcoat is priced at $995, the same as the outgoing Long Beach Red, and the FE2 Magnetic Ride Control without Z51 will cost you $1,895. Silver Flare is the other new exterior color for 2021, but there is no additional cost to select it so it is not listed below.

  • GPH – Red Mist Metallic Tintcoat $995
  • FE2 – Magnetic Ride Control w/o Z51 $1,895
  • DSY – Orange Full Length Racing Stripes $995
  • DSZ – Red Full Length Racing Stripes $995
  • DTO – Yellow Full Length Racing Stripes $995
  • DUH – Blue Full Length Racing Stripes $995
  • DZU – Carbon Flash/Edge Yellow Stinger Graphic $500
  • DZV – Carbon Flash/Midnight Silver Stinger Graphic $500
  • DZX – Carbon Flash/Edge Red Stinger Graphic $500
  • SFE – Wheel Locks $95
  • SQU – High Security Silver Painted Wheel Locks $105
  • W2D – Cargo Net Set $110
  • WKR – C8R Indoor Car Cover $1,195
  • PDY – Roadside Safety Package $175

We note that some of the most popular add-ons were not listed as a 2021 pricing, that being the High Wing or the three-piece Aero Kits which were discontinued and stripped from 2020 orders. We were hoping to see those again. I am also surprised to see that the NPP Performance Exhaust pricing stayed at $1,195 which is what that price as been since it was first introduced on the 2014 Corvettes. Kudos to GM for keeping that popular option from rising as well.

As we’ve discussed, ordering for the 2021 Coupes and Convertibles starts at the end of the week and it will be a busy time for dealers so make sure you have your plans together when you sit down to spec out your Corvette order. Production of the 2021 Corvettes is expected to start in November.


Source:
Chevrolet.com


Corvette hopeful for Road America, expects BMW fightback

Corvette Racing’s Antonio Garcia and Jordan Taylor are optimistic that a C8.R can score the new car’s third consecutive IMSA WeatherTech SportsCar Championship win at Road America this weekend, but they expect a stronger challenge from BMW following the latest Balance of Performance changes.

For this fourth round of the championship, all GT Le Mans-class cars have had their fuel capacity increased – the BMW M8s by 12 liters, the Corvettes by five liters and the Porsche 911 RSRs by three liters – but the BMWs, run by Rahal Letterman Lanigan, have also had their minimum weight cut by 22lbs [10kg] and their power increased by 14hp.

This could throw a high hurdle in the way of Corvette Racing’s hopes to score three IMSA wins on the bounce for the first time since the spring of 2017. Garcia and Taylor won the second round of this season, the Daytona 240, while they finished just behind their victorious teammates Tommy Milner and Oliver Gavin two weeks ago in the Cadillac Grand Prix at Sebring.

Looking ahead to this weekend’s 2hr40min race around the undulating 4.014-mile course at Elkhart Lake, WI, Garcia said: “Tire degradation is always a key thing at Road America. This new Corvette should be a little bit better on that compared to the[2014-’19 predecessor] C7.R.

“Porsche was strong last year and they obviously are going to be strong again. At Sebring, they showed really good pace behind us. With BMW getting a break, it will be difficult to fight them.

“That will create different speeds at different parts of the track where each car will be strong. We will see where everything lines up, but for sure that should be interesting.”

Added Taylor: “Road America is definitely a power track, so I think [BMW’s BoP break] will be pretty major when we go there. We saw at the Rolex [24 Hours] that they had a pretty big power advantage where they were able to drive around most competitors.

“I’m not sure where their loss of performance was at the Daytona and Sebring sprint races compared to the Rolex but going to Road America that change should benefit them.”

The former IMSA Prototype champion concurred with his co-driver regarding tire life, pointing out, “Road America often has a big tire degradation part to it, so for us that could be a big part of the race strategy-wise.”

Explaining Corvette’s ‘hot streak’ with the new-for-2020 mid-engined C8.R since the restart of the IMSA season, Garcia stated: “At the Rolex 24 [in January] we were good but that was hidden by little mistakes and issues we had toward the finish. We had been competitive for the first 20 hours but had a few little things going on with the car because it was very new. The pace was there but we weren’t able to fight for the win at the end.

“Each month, there is a ton of development and we continue to show that. Even when we weren’t on the track, we continued to develop the C8.R.”

Taylor added: “It’s amazing that we’ve come out so strong after the quarantine period… It shows a lot for what Corvette Racing is about and the preparation it does behind the scenes. Even though no one could go to the race shop, the engineers were working from home and made huge strides on the C8.R. We went back to Daytona and obviously had a good race there with the win and then went back to Sebring where we were able to do a two-day test there before the quarantine and one simulator test when that period opened back up.

“For us it was an unknown for us because it was the first non-Daytona track where we were competing against all the other teams. Daytona is so unique in that you can stack up well at that track and have that not be relevant anywhere else. So it was promising that we were able to get the pole. The car was amazing all race weekend, and I think we’ve shown we can be competitive on all different kinds of tracks. I’m really looking for this one at Road America.”

David Malsher-Lopez for Motorsport


Composites-intensive masterwork: 2020 Corvette, Part 2

Appears in Print as: ‘Part 2: Beauty, speed, luxury — 2020 Corvette ‘

composites intensive Corvette 2020 design

Earlier this year, the first installment of eighth-generation Chevrolet Corvette sports cars (C8s) from General Motors Co. (GM, Detroit, Mich., U.S.) came rolling off GM’s Bowling Green, Ky., U.S. assembly line.  Described as the “fastest, most powerful entry Corvette” in the model’s 67-year history, it’s also the most composites-intensive Corvette, and the first to feature a mid-engine configuration. Not only is the 2020 Corvette Stingray beautiful and fast, but it’s tricked out with a host of luxury features. However, don’t let good looks and fast track times fool you: there’s plenty of composites innovation on this car. CW’s two-part coverage of composites use in this vehicle began in the July 2020 issue. This is part 2.

Body structure: part B

The new Corvette features not one but two trunks that, combined, hold 12.6 cubic-feet/0.36 cubic meters of cargo. Both trunks are produced in 42 wt-% chopped fiberglass/vinyl ester-unsaturated polyester (VE-UP) resin, but use different processes driven by geometry and mechanical requirements. The front trunk (frunk) is compression molded 0.95-specific gravity (SG) “float” sheet molding compound (SMC), while the rear trunk is formed via the proprietary PRiME (Prepositioned Reinforcement ensuring Manufacturing Excellence) process, a liquid compression molding (LCM) variant. The float SMC and the PRiME process were developed by processor Molded Fiber Glass Co. (MFG, Ashtabula, Ohio, U.S.). MFG produced all structural SMC and LCM’d parts on the car.

“Although both spaces are characterized by shallow-draft, long-draw walls, the frunk is smaller than the rear trunk, and could be compression molded,” explains Chris Basela, Corvette body structure lead engineer. “The rear trunk needed higher mechanical performance and was a tough geometry to fill with an SMC charge. Because the PRiME process lets us change fiber length, we could use longer pre-positioned reinforcement in our preform. Flowing the resin [not the glass] proved the best approach.”

Ductwork in the Corvette Stingray
Depicted air pathways through the body-structure

The 2020 Corvette is the first car to use body-structure cavities (integral to the body frame) for air-induction ductwork (above), which is fed by multiple primary cooling paths (below). The car’s naturally aspirated V8 engine needs a lot of air, so it was important to ensure good, unimpeded airflow to keep the engine cool. Source (both images) | General Motors Co.

Clever engineering and a new material were key to cooling the C8’s engine. Multiple primary cooling paths (rear inlets behind each door, front wheelhouse vents, and outboard cooling inlets) feed highly complex induction ducts that funnel air through the vehicle and across the engine, before ejection through aluminum-mesh vents and SMC appliqués on either side of the glass partition that showcases the Corvette engine. The appliqués are made with MFG’s float (0.95-SG) SMC (chopped glass/UP-VE resin). Low in volatile-organic compounds (VOCs), the material reduces emissions and eliminates the need for resonators on rear-induction ducts, while reducing cost and mass (2.4 kilograms) versus alternative technologies.

The massive, customer-visible rear surround frame — 64 by 69 by 24 inches (163 by 175 by 61 centimeters) — that surrounds the rear-half of the passenger compartment is compression molded in toughened 1.2-SG SMC. This hybrid-reinforced material features carbon fiber at 15% fiber-volume fraction (FVF) and glass fiber at 30% FVF, with a low-VOC UP resin, formulated to withstand engine-bay heat. The frame forms the dimensional foundation for all rear exterior and interior panels, yet flexible design enables it to be used for multiple model variants. Thanks to significant parts consolidation, secondary attachments were eliminated, increasing interior package space, reducing noise/vibration/harshness (NVH), providing better body structure and sealing performance, improving rear-hatch visibility and reducing mass (15%) and cost versus the outgoing frame. “Given the size of this part, which is almost 6 by 6 feet tall and 2 feet deep, we actually had to make the material flow uphill in the mold, so we were all a little worried on that first shot,” Basela recalls.

Corvette rear surround frame.

The very-large, customer-visible rear surround frame provides the dimensional foundation for all rear exterior and interior panels. Each half of the mold in which the part is formed weighs ~35,000 pounds/15,900 kilograms and was produced by Century Tool, a division of Tooling Tech Group (Fenton, Mich., U.S.). The compression press itself has 2,800 tonnes clamping pressure and a platen that measures 108 by 68 inches (274 by 173 centimeters). Despite its size, cycle time is

a nominal 3 minutes. | SPE Automotive Div.

Equally interesting is the bulkhead (mid-window frame), which was custom-formulated by MFG to resolve high heat and noise challenges, since this portion of the cabin sits directly over the V8 engine. Fiberglass reinforcement combined with beryllium graphite filler in low-VOC VE-UP resin deadens sound transmission into the passenger compartment so effectively that it eliminated the need for secondary sound-deadening countermeasures. That, in turn, reduced costs, increased interior package space and passenger comfort, and improved body sealing and NVH. “With a specific gravity of 2.2, this is the first composite part I’ve ever been asked to add mass to rather than take it out,” laughs Basela.

Closures and trim

Exterior body panels are all bonded (inner/outer), painted, toughened 1.2-SG SMC (22-28% FVF fiberglass/UP resin, depending on component) from Continental Structural Plastics (CSP), a Teijin Group company (Auburn Hills, Mich., U.S.). By bolting on composite closures, GM achieves the C8’s aggressive styling, aerodynamics and functional cooling integration, with  cost-effective lightweighting on multiple model variants using common parts. All body panels are painted inline on a “skuk system” in vehicle position, using Bowling Green’s innovative robotic wet-sanding process.

High-temp FIP silicone gasket on rear service doors

Rear service doors are molded from toughened SMC and feature a high-temperature, foam-in-place silicone gasket that provides a durable seal with excellent compression-set resistance while handling long-term exposure to engine-bay heat. Another composite — heat- and abrasion-resistant aluminized aramid fabric — is used as a heat shield to provide extra thermal protection on door interiors. | SPE Automotive Div.

Another innovation involves use of a one-part, thixotropic silicone elastomeric foam gasket applied to the back side of SMC service doors, which are located in the rear trunk (one on coupés, two on convertibles), and permit customer access to the air-filter system. Owing to proximity to the engine bay, the high-performance foam-in-place

 

(FIP) elastomer (Silastic 3-8186 from Dow, Inc., Midland, Mich., U.S.) was specified to survive continuous-use temperatures up to 392°F/200°C while providing a durable seal with excellent compression-set resistance, even after repeated open/close cycles. GM reports that most other die-cut foams and gaskets would either have melted or broken down under continuous exposure to such temperatures. After dispensing, the applied gasket is heat-treated at 167°F/75°C for 10 minutes to expand the foam, eliminating die-cutting cost and waste. The doors themselves are toughened SMC (42% FVF glass in a VE-UP matrix). Heat shields, produced by Gentex Corp. (Carbondale, Pa., U.S.) using heat- and abrasion-resistant aluminized Kevlar aramid fabrics (fiber from DuPont de Nemours, Inc., Wilmington, Del., U.S.), provide door interiors with extra thermal protection.

 

The new mid-engine 2020 Chevrolet Corvette Stingray from General Motors Co. is said to be the fastest, most powerful entry-level Corvette in the model’s 67-year history. It’s also the most composites-intensive, with a host of innovative technology. | General Motors Co.

GM also used its second-generation, fully automated precision wheel-balance system on the C8. Developed with The 3M Co. (St. Paul, Minn., U.S.) and ESYS Automation (Auburn Hills, Mich., U.S.), the high-density (5.8-SG) composite wheel weights with tailored magnetic properties replaced traditional stamped metallic weights in painted steel, zinc or lead that have specific mass and must be hand-applied to wheels.

The new system uses large spools of extruded tape with adhesive backing that contain 67% by volume post-industrial, corrosion-resistant, fully recyclable steel alloy in a fluoropolymer base. The automated system examines each wheel, then cuts and applies custom-weight tape segments in smaller, more precise increments to improve ride and reduce tire wear. It also reduces assembly time and cost, simplifies inventory, eliminates scrap and labor and is offered in more colors than metal weights.

Coupé roofs are available in three trim levels:  painted, low-density toughened SMC (from CSP); clear, hard-coated polycarbonate (PC); and clear-coated/exposed-weave carbon fiber composite with painted edges (from deBotech Inc., Mooresville, N.C.). CSP also supplies several Class A, toughened 1.2-SG SMC panels for convertible-model retractable-roof systems.

Additional Corvette beauty shots. 

Additional Corvette beauty shots. Source | General Motors Co.

Other exterior trim panels include painted thermoplastic polyolefin (TPO) front fascia upper and lower, the latter with integrated ducts to direct air to brakes (Z51 package only) and outboard heat exchangers. Outer grille and brake cooling vents are painted acrylonitrile butadiene styrene (ABS).

The upper rear fascia is molded-in-color (MIC) TPO, but the lower rear fascia assembly is Class A painted, 1.2-SG SMC (glass/UP resin), owing to the part’s close proximity to hot exhaust tips. SMC’s excellent mechanical performance enabled GM to design an unsupported short rear overhang and use larger spacings between attachments without sagging. SMC also spreads loads efficiently over a larger area during low-speed rear crashes than thermoplastics. Brackets and rear parking-assist sensors are bonded to the SMC. This is said to be the first time SMC bumper fascias have been used on high-volume vehicles.

Rear-hatch appliqués feature painted PC/ABS for the upper panel, SMC with aluminum mesh for side vents and an SMC lower appliqué to accommodate thermal loading directly over the engine. These SMC panels are produced by LyondellBasell’s Quantum Composites Inc. (Bay City, Mich., U.S.). Door-handle release switches are PC/ABS, while the rear air-intake vent is SMC. The base car sports a blowmolded, painted ABS spoiler and the rear air-exit grille is injection molded painted ABS. A-pillar and header appliqués are painted ABS, as are exterior side-view mirror caps and radiator inlet grilles. Depending on the option package, a toughened SMC front underwing and either a blowmolded TPO or carbon fiber composite front splitter/diffuser — clear-coated/visible-weave carbon/epoxy produced by deBotech using prepreg from Solvay Composite Materials (Alpharetta, Ga., U.S.) — contribute additional aerodynamic stability. A rear diffuser in toughened SMC mates to the SMC lower rear fascia in Class A painted SMC from MFG.

The premium carbon fiber trim package features various clear-coated/visible weave carbon fiber accents inside and out, including mirror caps, front grille insert, front splitter, accessory wing, engine-compartment covers, interior door switch plates, rocker moldings, instrument-panel cluster bezel, door-handle covers, quarter appliqués and ride-control plate. These components are produced by deBotech, SMI Composites LLC (Comer, Ga., U.S.) and Plasan Carbon Composites (Wixom, Mich., U.S.).

Chevrolet Corvette Stingray

The Corvette is not only fast and beautiful but contains a host of creature comforts. For composites aficionados, the premium carbon-trim upgrade adds numerous clear-coated/visible-weave carbon fiber composite accents to exterior and interior surfaces, such as the ride-control plate shown here. | General Motors Co.

Advancing technology

The 2020 Corvette has already won many prestigious industry awards, including 2020 MotorTrend Car of the Year, 2020 Automotive News PACE (Premier Automotive supplier Contributions to Excellence) Partnership Award, and several awards from the Society of Plastics Engineers (SPE), including 2019 Vehicle Engineering Team Award. “Although the new Stingray’s mid-engine architecture has dominated headlines, no matter where the engine is — in front of or behind the driver — for eight generations, Corvettes have always advanced the state of the art in automotive materials technology,” adds Tadge Juechter, executive chief engineer-Global Corvette. “Advancing technology is at the heart of what we do.”


Legally Blind for 44 Years, a Canadian Man Has Sight Restored and Buys a Corvette

Legally Blind for 44 Years, a Canadian Man Has Sight Restored and Buys a Corvette

Seeing, quite literally, is believing for a Canadian man named Mike Schickerowski.

At age 44, he got his driver’s license just two weeks ago.

Why the delay?

Schickerowski was born with a disorder called nystagmus, which causes the brain to see images as a blur.

“My brain would never interpret the image as a steady picture,” he explained. “It basically involves involuntary movement of your eyes. If you’ve ever taken a photo with your camera and moved it slightly or the object moved and it’s a blur, it’s the exact same symptoms.”

That means Schikerowski has been legally blind his entire life, that is, until undergoing successful experimental surgery to correct the condition in California in October 2018.

He says being able to see has changed his life in many ways, most notably allowing him to take part in the simple things of life.

“I took my son fishing last week,” he said. “I was never able to do that before on my own. I took my daughter for ice cream. It’s unbelievable.”

Of course, those trips are made even more special because Schickerowski decided to splurge on his first vehicle ever – a yellow C7 Corvette Grand Sport. So confident he would pass the driver’s license exam for the first time, he purchased the flashy sports care before he even passed the test! “it was overwhelming to think I was doing it at that age,” he said, “but I did pretty well and I just couldn’t believe it.”

While some people thought he should have bought a more practical vehicle, especially living in the province of Alberta, Schickerowski says he wanted to stand out.

“Some people said, ‘Oh, it’s Alberta, you need a truck,’ and sure I like trucks — they’re nice — but everybody’s got a truck,” he said.

TITLE


Schickerowski is grateful that he is able to drive the Corvette on his own, but he was even more excited about being able to see the world clearly for the first time after the surgery was a success.

“It was beautiful to see,” he said, “but it was more the realization of what I missed my whole life. It was emotional breakdown. My mom was bawling, and my wife was ecstatic. It was never supposed to happen.”

While he says there was a “sad moment” realizing how much of his life had already gone by and “how much I had suffered,” he says he’s “still excited for the future.”

His wife, Angie, says watching Mike see things in 3D for the first time was “unbelievable – things like fireworks, there’s all these things.”

“I’ve lived a wonderful life and enjoyed every moment,” he says. “This is just the awakening to possibilities of the future and the opportunities that are there.”

Add his yellow Corvette to that list of expanding opportunities, and here’s hoping he enjoys his car for years to come.


Thanks to Bob S. for the link!


Source:
globalnews.ca


Man Finds Late Father’s Corvette On KSL Classifieds

CLEARFIELD, Utah – A discovery on KSL Classifieds led to a family reunion of sorts for one Utah man.

Nic Samuels, who collects cars, thought his father’s 1980 Chevrolet Corvette was gone forever.

His father, Michael Samuels, sold it while Nic was serving overseas in the U.S. Air Force 10 years ago.

“I honestly thought I would never find it, it was just kind of high hopes and wishful thinking,” Samuels said. “Spur of the moment — at the time I just kind of felt like hopping on and taking a look. And little do you know. I didn’t even go to the second page. It was like the fourth one in.”

He popped the hood to verify it was his father’s car and was overcome with emotion when he saw his parents’ initials.

“He was diagnosed to live six months, and he lived like eight years with his cancer,” Samuels said.Old Row Nature Walk Pocket Tee – Maroon / XLOld Row Nature Walk Pocket TeeAd by Old RowSee More

His father died in 2014. Never did he think he would say hello to this car again, buying it to bring it back home.

“Kind of feel like he is there with me,” Samuels said.

For the man who loves to fix things, finding this car is in a sense, fixing him.

“Life’s not permanent,” he said. “Appreciate what you have while it is there. Enjoy the little things.”

BY MORGAN WOLFE, KSL TV


Success Rate “Speaks Volumes” for New Corvette C8.R

Corvette Racing carries momentum to collect 101st victory in IMSA competition…

Photo: Corvette Racing

Corvette Racing’s second win in only the third IMSA WeatherTech SportsCar Championship race this season “speaks volumes” for the new Chevrolet Corvette C8.R according to Jordan Taylor.

The No. 4 entry of Tommy Milner and Oliver Gavin led home a 1-2 finish for Corvette at the Cadillac Grand Prix of Sebring, marking the team’s first sweep since Lime Rock Park in 2016.

It gave the Pratt & Miller-run factory GT Le Mans squad its 101st victory in IMSA competition after notching up the century last time out at Daytona.

Image

Milner led home the sister car of Antonio Garcia by less than five-tenths of a second but says the final laps were not as easy as it looked.

“I know it took us a while to get to 100 but it’s nice to get over the hump and get 101 so you’re not talking about that one,” he said.

“Today was all about strategy, all about not making mistakes. It looked like we were going to have a pretty good race there with the Porsche. It was all pretty close but then it fell apart as far as that goes.

“In the end, it was just left to myself and Antonio and Olly and Jordan there to put on a show a little bit there.

“Olly really made the race for us there saving fuel and that allowed us to have a bit of a better pit stop and get out in front of the No. 3 car and that was the race for us.

“It got pretty close there at the end, he was close but he was a little bit nicer to me than he could have been.”

Image

Co-driver of the second-placed No. 3 Corvette, Taylor, was pleased with the team’s double podium.

“It’s a great day for Corvette Racing,” he said. “It’s our third race and to get two wins, our first 1-2 since 2016, I think it speaks volumes for the team and this new C8.R.”

Porsche Incident Spoiled Potentially Close GTLM Race

While Corvette’s run was without trouble, the same could not be said for the factory Porsche 911 RSR-19s, with both the Nos. 911 and 912 car’s chances of victory being dashed in seconds.

The pair came together in the first round of pit stops which resulted in the No. 912 losing its nose and the No. 911 suffering a puncture from the contact a few laps later.

Laurens Vanthoor and Earl Bamber impressively recovered to third in the No. 912 Porsche. However, Milner believes the race would have been closer had the Porsches not collided.

Image

“It was looking like it was going to be very close pace-wise and everything,” he said.

“You saw in the pit stop as well we came in together and we were going to leave together. In terms of strategy details, it looked like it was going to be a close race, fuel numbers, tires whatever it was.

“They’ve been fast all season and continue to be quite quick so for sure we have some work to do to find an advantage somewhere if we can and ultimately not make mistakes throughout the race.

“We saw today how one little mistake can ruin your race. We just need to be extra vigilant, no pit lane incidents like that. All those little details that aren’t quite sexy in some way but make the race for you in the end.”

Image

Gavin was on pit road in the fast lane and was caught up in the incident but did not sustain any damage.

“I didn’t know anything about it. I just saw one of the Porsches left missing its front bumper,” he said. “I think it was all of us trying to leave together and there just wasn’t enough room.

“I was already in the lane so when it’s like that I have priority.”

Slade Perrins for Sportscar 365


Break Necks In A Brand New C8 2020 Chevy Corvette Z51

A small donation to Ronald McDonald House could permanently put you in the driver’s seat of this performance-oriented beast.

Appropriately dubbed “America’s Sports Car”, the Corvette has been Chevrolet’s flagship sports car ever since its big unveiling back in 1953. With 60 years of production that has seen eight generation designs, General Motors made the all-new C8 Corvette a game-changer. For the first time, the model is powered by a mid-mounted V8 engine. Even the C8’s body was drastically and beautifully redesigned for aerodynamics that is guaranteed to make any car enthusiast stop dead in their tracks. Get get your hands on the fastest production Corvette yet – a 2020 Chevrolet Corvette Z51 with 3Lz trim. A small donation to the Ronald McDonald House will enter you into the drawing for this incredible C8. Enter the code WIN here to receive double entries!

<img src="c8-corvette.png" alt="A 2020 Chevrolet Corvette Z51 being offered through Ronald McDonald House">
Ronald McDonald House

Finished in a stunning Elkhart Lake Blue Metallic, the exterior is nothing short of magnificent. The exterior is also features staggered 5-spoke Carbon Flash-painted aluminum wheels (19-inch front, 20-inch rear) wrapped with sticky Michelin Pilot Sport 4S rubber. Complementing the exterior further is a high-wing Carbon Flash rear spoiler and an exposed carbon fiber ground effects kit. Open the doors to a stunning black interior that features carbon fiber trim and GT2 bucket seats.

​Powered by a mid-mounted 6.2-liter LT2 V8 engine with an appearance package, the new C8 generates 495-horsepower and 470 lb/ft of torque that can propel this car from 0 to 60 miles per hour in a lightning quick 2.9 seconds. Sending that power down to the rear wheels is an 8-speed Dual Clutch automatic transmission. The Z51 Package gives this aggressive Corvette a unique Z51 adjustable performance suspension, an electronic limited-slip differential, an altered axle ratio, large Z51 Brembo brakes, a sport exhaust, enhanced cooling, and improved traction.

If you’re looking for a car that is can drive to the track, smoke the competition, and then drive home, look no further than this performance-oriented 2020 Chevrolet Corvette Z51. Even if the track isn’t your thing, this would make one head-turning daily driver. A small donation to the Ronald McDonald House will enter you into the drawing for this incredible C8. Enter the code WIN here to receive double entries! The Ronald McDonald House helps support families to stay close to their child while they receive treatment at a local hospital.

*Actual Corvette may vary from images above based on availability.*

Source; Amy Williams’; Yahoo