Carbon Fiber Extreme

2020Stingray

Watch a C8 Mid-Engine Corvette Hit 173 MPH on a Dry Lake Bed

Even off the pavement, the new ‘Vette is a rocket ship.

The 2020 C8 Chevy Corvette is a fast car. In base form, it can hit a staggering 194 mph flat-out. Even with the drag-inducing Z51 performance package, the car can still do 184. Hennessey Performance took theirs to 182 mph with ease before they turbocharged it to oblivion. Now, there’s another C8 top-speed run on the internet, and this time, it takes place on a dry lake bed.

Popular YouTube TheStradman took his new Z51-equipped Corvette to a dry lake bed in Utah to test out the top speed of the car. He managed to hit an impressive 173 mph before slowing down—not bad considering the uneven and bumpy surface. It helps that there’s absolutely nothing for miles in either direction. In fact, from inside the cabin, it looks a bit uneventful. Here’s a perspective from outside the car to give you a sense of how fast 173 mph is:

If the base Corvette is this quick right out of the box, we’re curious to see how the upcoming Z06 stacks up. Considering the last-gen car could hit 200 mph, we’re expecting big things.

Source: Brian Silvestro; for RoadandTrack


Mid-Engined Chevy Corvette Video Analyses The 2LT Interior

The Goldilocks zone of Corvette C8 interiors?

By now, you should know that Chevrolet has started deliveries of the mid-engine 2020 Corvette. Lucky owners of the ‘Vette C8 are starting to receive their newest toy and most likely you’ve already seen one on the streets – that’s if the state you’re in is not affected by the coronavirus lockdown.

If you’re among those who are planning to purchase the new Corvette but are undecided with the trim level to choose, this video might be able to help you – especially if you’re particular with a car’s interior.

The Corvette C8 comes with three trim levels: 1LT, 2LT, and 3LT. The differences lie mainly in the features offered on each trim level, which defines that the cabin will look and feel like. That’s pretty important, considering that we spend so much time inside the car rather than staring at our investment from a distance. So, here’s a little guide.

The base 1LT trim isn’t really basic. With the entry-level trim, you already get the GT1 seats wrapped in mulan leather, a customizable 12-inch gauge cluster, push-button ignition and keyless entry, and an 8-inch Chevy MyLink infotainment system with Apple CarPlay and Android Auto, 4G LTE Wi-Fi, and 10-speaker Bose sound system. The Corvette 1LT trim is available in three color options: black, gray, or red.

Going up the 2LT trim gives you more interior color options plus features like a rearview camera mirror, a colored head-up display, heated/cooled seats, heated steering wheel, advanced blind-spot monitor, and rear cross-traffic warning. The infotainment gets upgraded as well with a wireless charger and a 14-speaker Boss audio system.

Finally, the 3LT trim dials up the ante by adding a premium Nappa leather with suede microfiber accents – all in combination with the GT2 seats that have more bolsters. These seem not a lot but the range-topping trim adds luxury to the sports coupe.

If you’re still undecided, watch the 2LT interior review on top of this page to check whether you need to take it down a notch to 1LT or go all out on the top-level 3LT.

Source: HorsePower Obsessed


How to Pump Gas without Passing Germs Around

The etiquette of doing something you do regularly while staying safe and clean.

  • We might need new gas-pumping etiquette rules for the 21st century, both for selfish and altruistic reasons.
  • We’ve known since 2011 that gas pump handles can be filthy—they’re worse than ATMs or escalators, even—but there’s no reason to worry if you take the right precautions.
  • You can lower your risk by using gloves or paper towels to gas up, using touch-free pay options, and staying as physically separate from others as possible as you refuel.

You may have heard this one before: the best way to avoid catching some sort of communicable disease is to wash your hands well, and often. This advice isn’t exactly new, which hints at how reasonable and responsible it is.

Washing your hands to stay clean was the takeaway lesson from a 2011 study conducted by Kimberly-Clark Professional, which found gas pump handles were “the filthiest surface that Americans encounter on the way to work,” according to Reuters. The Los Angeles Times reported back then that the study found 71 percent of gas pump handles the Kimberly-Clark researched tested were considered “‘highly contaminated’ with the kinds of germs most associated with a high risk of illness.” Compare that to only 41 percent of ATM buttons and 43 percent of escalator rails.

The Kimberly-Clark Professional tests were done in big cities (Atlanta, Chicago, Dallas, Los Angeles, Miami, and Philadelphia) almost a decade ago, but when something like the coronavirus impacts pretty much every corner of the world, it’s a good reminder to take care when gassing up. When it comes to the COVID-19 coronavirus specifically, the National Institutes of Health has issued information that explains that coronavirus can be stable for 24 hours on some surfaces like cardboard and “up to two to three days on plastic and stainless steel.”

If you’re not already carrying disinfecting wipes in the car with you, this is a good time to start, assuming you have some available, and wipe off the pump handle and touchscreen, or any other surfaces you plan to touch, before your hands make contact. Even better, it might be a good idea to search out a station that accepts contactless payment at the pump, so you won’t need to come into physical contact with the touchscreen or anything else other than the pump handle. Two easy solutions to this issue are to either wear gloves or to use the paper towels commonly provided for window cleaning as a guard between your hands and the screen, buttons, and pump handle. Keeping gloves in the car is a good idea, but they shouldn’t be the disposable sterile gloves that hospitals can use when there’s a need for them there. If you don’t have gloves, keep some hand sanitizer in the car to use on your hands after filling up.

As for social distancing, it’s convenient that gas pumps are relatively far apart from one another, contagion-wise, but even so, choosing to fill up your tank at an off-peak time can be safer. If there are other people getting gas at the same time, keeping at least six feet between you and them is a good idea for everyone involved. And it should go without saying that you shouldn’t go into the store unless there’s a reasonable need to do so if there’s still a rapidly spreading disease going around.

The actual chance that you will catch a transmittable viruses at the gas station is low. As the Illinois TV station ABC-20 reported based on answers from a medical expert, the sequence of events that have to happen to get the virus from someone who has it (someone coughing onto the pump handle or touching the touchscreen with virus on their hands, and then you touching it and then your face) can be interrupted in any number of ways. Even so, there’s no harm in being extra careful in these potentially dangerous times.

Sebastian Blanco- Car and Driver


Hennessey’s twin-turbo C8 Chevy Corvette V-8 makes 643 horsepower early in development

2020 Chevrolet Corvette Stingray undergoes twin-turbo conversion at Hennessey
2020 Chevrolet Corvette Stingray undergoes twin-turbo conversion at Hennessey
2020 Chevrolet Corvette Stingray undergoes twin-turbo conversion at Hennessey
2020 Chevrolet Corvette Stingray undergoes twin-turbo conversion at Hennessey
2020 Chevrolet Corvette Stingray undergoes twin-turbo conversion at Hennessey

It took 30 hours for Hennessey Performance Engineering to tear apart a new 2020 Chevrolet Corvette, install twin-turbo setup, and put it back together.

It’s no surprise, then, that the twin-turbo C8 Corvette isn’t ready to be sold to customers. The engine lacks intercoolers and Hennessey hasn’t cracked the code of GM’s new electrical architecture to reprogram the ECU.

“This is just the beginning, our own car, doing R&D,” company founder and CEO John Hennessey told Motor Authority.

On Monday, the engine made 643 horsepower and 570 pound-feet of torque at the wheels on a Dynojet dyno while running just 5 psi of boost. That compares to baseline testing HPE performed on the stock car which revealed 466 hp and 451 lb-ft of torque. HPE plans to offer a 1,200-hp version of the C8, which Hennessey said could make 18-20 psi of boost.

Hennessey took delivery of an orange C8 Corvette in Detroit on March 13. He and his daughter, Emma, drove back to the performance outfitter’s Texas headquarters and performed baseline testing before the Hennessey team tore apart the car.

The orange C8 fired back to life on Friday with twin 62-mm Precision Turbos and twin blow-off valves connected to the throttle body mounted behind the catalytic converters. Both turbos are oil-cooled with twin scavenge pumps that feed back into the motor.

The system is not intercooled. Instead, there’s a methanol injection setup to keep things from getting too hot. HPE is considering where to put intercoolers. The current packaging has limited space for intercoolers without cutting into trunk space, which Hennessey does not want to do. 2020 Chevrolet Corvette Stingray undergoes twin-turbo conversion at Hennessey

Hennessey told Motor Authority his team currently can’t tune the factory ECU, but it is looking at aftermarket solutions for the engine management system. He noted it took a year for solutions to come to market for the C7 and added, “hopefully, it won’t take a year.”

Hennessey said when the turbocharged C8 was first started it didn’t throw any codes, errors, or a check engine light. “The computer seems happy with the turbos,” Hennessey noted. A check engine light did appear when the front wheel speed sensors were disconnected to put the car on the dyno, Hennessey said.

The orange C8 will used for R&D of upcoming modifications. Hennessey said he doesn’t expect to deliver modified customer C8s for at least six months, and all will have intercoolers and full plumbing.

Joel Feder for Motor Authority


2020 Chevrolet Corvette vs. 2020 Ford Mustang Shelby GT500 at the Drag Strip

Did you see the two race on YouTube? We’ve tested them, too; here’s why the results were no surprise.

image
  • We have tested both the 2020 Chevrolet Corvette (11.2 seconds at 122 mph) and the 2020 Ford Mustang Shelby GT500 (11.4 seconds at 132 mph) in the quarter-mile.
  • A video on YouTube, however, shows flipped results: 11.5 seconds at 120 mph for the Corvette and 10.8 seconds at 132 mph for the GT500.
  • As always, the driver and track conditions are critical, and our two-run average is far more repeatable than any one-off run at a drag strip.

When we tested Ford’s new 2020 Mustang Shelby GT500 against the top-dog 2020 Chevrolet Camaro ZL1 1LE, the Mustang came out on top on the drag strip. But how does the front-engine Shelby stack up against the other, now mid-engine, threat from Chevy?

image

Greg PajoCar and Driver

image

During our testing, the GT500 hurtled through the quarter-mile in 11.4 seconds at 132 mph. But that was on a regular street-like surface, not a sticky, prepped drag strip. We struggled mightily with traction at launch, and our best run was with the launch control set to the lowest rpm allowed (1200 rpm) to prevent igniting a rear-tire fire. However, no surprise: with more traction far, better numbers are possible, and we’ve seen numbers below 11 seconds at drag strips, including this kid, who ran a 10.665 shortly after he acquired the car.’Murica Which Ultimate Pony Car Is the 1/4-Mile King?This Kid Ran a 10.66 Quarter Mile In His GT500

On the other hand, the 2020 Corvette has far fewer launch struggles, as it benefits from its newly acquired mid-engine layout and rear weight bias. Moving the weight distribution rearward improves launch traction, helping it jump off the line much quicker. During our testing, and despite far less horsepower, the mid-engine Vette outaccelerated the GT500 through the quarter-mile by two tenths of a second, reaching it in 11.2 seconds at 122 mph.Advertisement – Continue Reading Below

We’re starting to see other people’s numbers from both of these cars, though, as customers are starting to take deliveries of their C8 Corvettes and GT500s. Contrary to our test results, there’s a video circulating on YouTube that shows the new GT500 beating the C8 Corvette through the quarter-mile by seven-tenths of a second. It raced to the quarter-mile in 10.8 seconds while the Corvette reached it in 11.5 seconds.

Keep in mind that the driver and conditions are huge factors in quarter-mile and acceleration results. We suspect that here, the Corvette likely got bogged down on the high-grip surface, as the launch control isn’t optimized for those conditions, and the 760-hp Mustang benefited from the extra traction on the track.

 Connor Hoffman for CarandDriver


2020 Chevrolet Corvette C8: Top 10 Reasons To Buy

2020 Chevrolet Corvette Front Red

All-new 2020 Chevrolet Corvette is now on sale, and buyers are lining up

With deliveries of the all-new 2020 Chevrolet Corvette beginning this month we know there are a lot of very excited Corvette buyers out there who are just now getting familiar with Chevrolet’s newest sports car. What drove those shoppers to the new eighth generation Corvette C8, and what are they likely discovering as their ownership experience begins?

We’ve been fortunate to drive the new Corvette on multiple occasions, on both public roads and at a closed course race facility. This has given us sufficient seat time to understand the 2020 Chevrolet Corvette’s upgraded design cues and capabilities. We could make a nearly endless list of why people want the new Corvette, but here are the top 10 reasons we think new, and prospective, Corvette buyers are lining up to sample Chevrolet’s latest supercar.

  1. Zero-to-60 Performance: The 2020 Chevrolet Corvette’s “base” 6.2-liter V8 engine makes 490 horsepower and 465 pound-feet of torque. That’s enough power and twisting force to catapult the Corvette to 60 mph in 3 second flat. Spring for the $5,000 Z51 performance package, with 495 hp and 470 lb-ft, plus more effective engine cooling, more advanced brake and suspension components, stickier Michelin Pilot Sport 4S tires, along with aerodynamic enhancements, and the Corvette can hit 60 mph in 2.8 seconds.
  2. Exceptional Value: The 2020 Corvette starts at a meager $59,995, including delivery charges. Once again, that price includes a zero-to-60 time of 3 seconds flat, making the new Corvette not only one of the quickest street-legal cars you can buy, but one of only a very few cars capable of hitting those numbers for less than $100,000. The Corvette has always offered exceptional “bang-for-the-buck” performance specs. The C8 takes this longstanding Corvette tradition to new dimension.
  3. Top Speed=194 MPH: Not that we endorse going almost 200 mph in any vehicle, and certainly never on a public road. But – IF you have a safe, closed course facility to do it – the Corvette can indeed hit 194 mph. That’s in base form, at the $59,995 starting price. Pro tip: ordering the Z51 performance package actually reduces the car’s top speed even at it improves the Corvette’s zero-to-60 time. The Z51’s aggressive aerodynamics increase downforce, but the added drag reduces top speed to “just” 184 mph.
  4. 8-Speed Dual Clutch Transmission: Unlike a traditional manual transmission (which is not offered on the new Chevrolet Corvette), a dual-clutch transmission (DCT) has the benefit of keeping the rear wheels connected to the engine, even while shifting The “dual” in dual clutch means the incoming gear is engaged even before the outgoing gear is disengaged. This makes for shifts in under 100 milliseconds, far quicker than a human. The transmission’s design and placement also lowers the Corvette’s center of gravity.
  5. Magnetic Selective Ride Control: General Motors perfected this advanced active suspension technology years ago. How perfect? Ferrari licenses the use of this tech from GM for its own cars. When buyers equip the new Corvette with the FE4 $1,895 option they’ll have multiple driving modes, including Tour, Sport and Track. This enables a smooth, comfortable ride during relaxed driving conditions or track-ready stiffness when driving a 2020 Corvette on a closed course. It’s the definition of the “best of both worlds”.
  6. Cargo Capacity: A sports car with functional cargo capacity is relatively rare, and a 3-second sports car with 13 cubic feet of cargo capacity is unheard of…until now. The new Corvette has adequate space behind the engine to fit two full sets of golf clubs, while a front trunk, under the hood, can swallow a large carry-on bag with room leftover. We’re not sure how often Corvette owners actually pick up a buddy to hit the links, but for those that do, the 2020 Corvette is ready and willing, with cargo space to spare.
  7. Fuel Efficiency: Yet another longstanding Corvette character trait that continues in the new Corvette. Between the car’s slippery shape, torque-laden engine and 8-speed transmission there’s the potential for very little energy expenditure while cruising at a steady highway speed…assuming the driver’s goes light on the throttle. If he does, the new Corvette can deliver between 25 and 30 mpg.
  8. Driver-Focused Cabin: Everything from the squared-off steering wheel to the 12-inch, reconfigurable gauge cluster to the driver-angled 8-inch touchscreen confirms the Corvette’s performance-oriented purpose. The smaller front-end provides excellent forward visibility, which adds to driver confidence when navigating corners, and all three seats options provide excellent lateral support while remaining comfortable for long drives. The days of disappointing Corvette cabins are finally in the rearview mirror.
  9. Open Air Cruising: The new Corvette comes as a coupe or convertible, but even in coupe form the Corvette’s roof panel is easily removed and securely stored in the rear cargo area. The convertible uses a retractable hardtop design, the first in Corvette history, that folds away in 16 seconds at speeds up to 30 mph. Powered by electric motors, the Corvette convertible offers the same coefficient of drag as the coupe, with two cool nacelles behind each seat to smooth airflow at higher speeds.
  10. So Many Options: Almost as exciting as the new Corvette’s performance and value is the car’s range of personalization. The option list long, and can’t be remotely covered in this top 10 list. So head over to the Corvette Configurator and play with exterior colors, interior colors, stripe designs, seat designs, wheel designs, performance upgrades and exterior accents to your heart’s desire. But be prepared to spend quite a long time there. And don’t say we didn’t warn you.

Karl Brauer for Forbes


[VIDEO] Watch this 2019 Corvette ZR1 Hit 191 MPH in the Standing Mile

Oh ZR1, how quickly we have forgotten you and moved on to the C8. But then comes along a video like this that reminds us that even with an engine upfront, you are still one of our favorites!

All kidding aside, the 2019 Corvette ZR1 is one of our favorite Corvettes of all time particularly because of the things it could do, like shooting down a former Space Shuttle runway at Cape Canaveral at nearly 200 MPH!

Typically we see these high speed runs with a ZR1 that has the ZTK’s High Wing. This Long Beach Red Corvette ZR1 has the low wing for less drag and it seems to definitely show off its speed in this standing mile run in which the Corvette reached a top speed of 191.16 MPH.

Two views are shown including the in-car with telemetry overlay on the screen. We see the car was still accelerating past the mile and we’re excited as they tell us that two more videos coming that show the ZR1 also running 2.3 miles and 2.7 miles down the runway.

The video comes the Johnny Bohmer Proving Grounds on Merritt Island Florida. Previously we have seen the Genovation GXE Electric Corvette run on the same track and in fact, it might be interesting to compare the two cars after the ZR1 shares the two final runs

From Johnny Bohmer Proving Grounds via YouTube:


C8 Corvette Secrets: The 2020 Corvette Has a Flying Car Mode

C8 Corvette Secrets: The 2020 Corvette Has a Flying Car Mode


As we continue to digest all the new information that came out of last week’s First Drive Event with the 2020 Corvette Stingrays in Las Vegas, there is a new “Mode” to discuss that most Corvette enthusiasts have never heard of.

The 2020 Corvette Stingray has several “modes” that help drivers get the most out of their cars. We are already familiar with the regular driving modes that feature settings for Weather, Touring, Sport and Track, as well as the two customizable modes called MyMode and Z-Mode. But what you may not be aware of is that the 2020 Corvette Stingray’s equipped with Magnetic Ride Control also features a “Flying Car” mode.

Well, it is the 21st century after all!

Corvette’s Vehicle Performance Manager Alex MacDonald is responsible for the chassis tuning of the new Corvette and he was tasked with explaining much of the on-track performance capabilities of the new Corvette to those at Spring Mountain last week.

For the C8 Corvette, engineers have rolled out version 4.0 of Magnetic Ride Control with the biggest change to the system is the use of accelerometers rather than position sensors that measured wheel height. Here is the slide that was offered on the new Mag Ride for the C8 Corvette:

C8 Corvette Secrets: The 2020 Corvette Has a Flying Car Mode


The Magnetic Ride Control is tied into the Corvette’s Performance Traction Management system and that’s where the Flying Car Mode comes into play.

When your crest an incline and the Corvette’s wheels are off the ground, they will spin faster like they are on ice or another slippery surface because there is no resistance. The performance traction control senses that and sends commands to slow the wheels. But that’s not the best reaction when on the track. The system now senses when the car’s front wheels leave the ground (and assumes that the rears will be leaving as well), and the system tells the performance traction control to ignore it because it knows that it’s temporary and that all four wheels will be back on the ground momentarily.

Here is Alex talking about the Flying Car Mode:


“The other interesting note about MR is that it communicates with the performance traction system and it tells that performance traction system that if the front wheels have just gone over a big crest that we know that one wheel-base later the rear is about to go over that same crest, we can adapt the traction control to work in that situation and we call that Flying Car Mode, which is a cool name for it, because it does detect when the car is airborne and we can alter the chassis controls to deal what happens when the car lands.”


Source:
Video by Keith Cornett


Tech We Would Like to See on the C8 Corvette: Active Aero

Tech We Would Like to See on the C8 Corvette: Active Aero


With the highest performance versions of the seventh generation Corvette, customers were forced to make a choice. Did they want their car to have the highest possible top speed, or did they want to sacrifice some of that by bolting a slew of aerodynamic aids to their car for maximum cornering ability?

We would love for Chevrolet to take that decision out of the ordering equation for buyers of the upcoming Z models and the Grand Sport. They could give buyers the best of both worlds with the incorporation of Active Aerodynamics.

Active Aerodynamics can take many forms, from grille vents that close at high speeds to streamline a car, to suspension that lowers at speed to reduce lift. We know that the Corvette team would build a fully functional system that integrates several of these technologies into a cohesive package, just like they did on the C7 ZR1’s chassis-mounted wing and innovative balancing front underwing, but what we mostly want to focus on here is the most visible piece of such a system, the rear wing.

This unit would elevate both the performance and even the prestige of GM’s looming halo car. There are several benefits of an active rear wing that accompany their off-the-charts cool factor.

1. An active rear wing can be lowered, causing it, for all intents and purposes, to disappear, along with any drag that it was creating. Top-end General Motors Products have become so fast that the most track-worthy editions have suffered at the dragstrip because of massive fixed wings. The effects of the C7 Z06/Z07’s wickerbill spoiler have been well documented. Chevrolet officially listed the top speed of ZR1’s with the “big-wing” ZTK package as 10 MPH lower than their stock counterparts, and the Camaro ZL1 with the 1LE package has proven slower than the car it is based on, even in distances as short as a quarter-mile. Allowing these serious track performers to retract their wing, and the ZTK/Z07/1LE models become the best version of their respective model-line with no excuses or asterisks, which is what buyers that dole out more funds expect.

Causes of Aerodynamic Drag

Photo Credit: https://www.sciencelearn.org.nz


2. Just as these wings can retract to reduce drag and improve top speed, they can be “actively” placed in full “attack mode” for maximum downforce in the corners. This increases cornering speed, stability, and driver confidence which can lead to drastically lower lap times.

3. Upon hard braking, an active wing can also go vertical, transforming into an air brake. This assists the actual brakes, resulting in shorter stopping distances. It also keeps more weight in the rear of the car, again helping with stability and, especially in a rear-wheel drive car, improved corner exit speeds.

Car Magazine (UK)

Photo Credit: Car Magazine (UK)


All three of these traits brought to the table by an active wing radically assist the driver and make the car faster in all aspects. The coolest thing is that, with the right programming, the wing does all three automatically with seamless transitions, and, did we mention how awesome they also look?

There has been speculation about Active Aero coming to the Corvette for several years now. These rumors were fueled by GM’s own patent filings which showed a sketch of a C7 fitted with advanced aerodynamic trickery. We think the top dog mid-engine offerings are the perfect place for the General to finally deploy this technology that can already be found on the majority of the world’s supercars.

Corvette Blogger


Watch These Multiple C8 Corvettes Utilize Launch Control

For the last two days we’ve been in Corvette Heaven as we were invited by Chevrolet to come out to Las Vegas and test drive the 2020 Corvette Stingray. The test consisted of two parts that included a route through the Valley of Fire state park and then today we drove the new mid-engine sports cars at Spring Mountain Motor Resort & Country Club.

Today’s driving session culminated with the very talented instructors from the Ron Fellows Performance Driving School offering hot laps around the track. Each driver gave their passenger a demonstration of the capabilities of the new Corvette and those two fast laps started with engaging launch control as each car took to the track.

With 60% of the weight of the 2020 Corvette residing over the back wheels, the Launch Control demonstration shows just how quick these cars are able to put power to the pavement as those Michelin Pilot Sport 4S summer tires quickly hook up to send the car on the track.

We will be traveling from Las Vegas to home in Tampa on Wednesday, but keep checking back as we got a lot of great photos and videos from our 2020 Corvette drive on deck!


Source:
Video by Keith Cornett


10 Essential Options For The C8 Corvette Stingray

If you’re going to tick option boxes, then these are the ones to concentrate on.

The C8 Corvette is finally in production, which means people can start getting excited about their orders. The new Chevrolet Corvette comes well-stocked from the factory before you hit the options list, and the mid-mounted 6.2-liter V8 engine with a dry-sump oil system making 490 hp and 465 lb-ft of torque is just the beginning. It also comes with an 8-speed dual-clutch transmission, a limited-slip rear differential, Brembo brakes, a 10-speaker Bose sound system, 8-way power seats, keyless entry, and remote start, and a starting price of $59,995.

That’s one hell of a lot of car for five bucks shy of $60,000, and we would not turn our nose up at a base model. A lot of people are going to tick options though, so for those that are going to go beyond the base model goodness, these are the must-haves, and how we would go about speccing out a C8 Corvette.

1. 2LT Package

If you want more creature comforts for daily driving duties, the 2LT Package adds heated and ventilated seats, a head-up display, wireless phone charging, memory seats, upgraded digital rear-view mirror, forward-facing camera, power-folding mirrors, blind-spot monitoring, and rear-cross-traffic alert. For track days, it also includes a performance data recorder. It adds $7,300 to the price, but if it’s not going to be stored in the garage for weekends, this is the way to go.

The 3LT trim adds even more luxury to the Corvette but also pushes it over the $70,000 price point before anything else is added.

2. Z51 Performance Package

Whether you want the added convenience of the 2LT Package or not, any enthusiast will want the performance package for $5,000. It adds a performance exhaust, electronic limited-slip differential, a different rear axle ratio, upgraded Brembo brakes, improved engine cooling, front brake cooling inlets, Z51-specific front splitter and rear spoiler, and Michelin Pilot Sport 4S tires.

It also adds an extra spoonful of power, taking the 490 hp and 465 lb-ft of torque up to 495 hp and 470 lb-ft of torque. However, that’s purely from the performance exhaust which can be added without the Z51 package for $1,195.

3. Paint

Let’s face it, everyone and their neighbors will be ordering their C8 Corvette with red, white, yellow, or black paint. Which is a shame as there are some seriously cool colors available. We are partial to the Zeus Bronze Metallic, but we know that’s not going to be bold enough for many. Thankfully, the Elkhart Lake Blue Metallic is available and looks stunning. Rapid Blue is the lighter shade, but the darker hue of the Elkhart Lake Blue is sophisticated, accentuates the lines of the Corvette’s bodywork, and with the black accents, gives it a little extra menace without being too dark.

4. Visible Carbon Fiber

This is an easy way to ramp up the price of the C8 Corvette, so the key is to be judicious here. The $2,095 Visible Carbon Fiber grille insert is a bit much, as is the $1,145 carbon-fiber door mirror option. However, we would go for the visible carbon-fiber roof panel with a body-color surround that is not just lightweight, but can also be stored away in the rear trunk. For $3,495, you could go with the Carbon-Fiber Dual Roof Package that includes a transparent roof panel. That’s what we would opt for if the climate where you live doesn’t provide for long warm summers.

5. High Wing Spoiler

You don’t have to spec the High Wing Spoiler in Carbon Flash Metallic, but it’s the only way to get it with some paint schemes and will replace the Z51 spoiler if the package is added already. How much difference to the aerodynamics the higher spoiler makes isn’t clear, but it gives the C8 Corvette a different look. If you don’t want the optional spoiler in Carbon Flash metallic, then your paint is limited to Arctic White, Black, Shadow Gray Metallic, and Torch Red.

6. Engine Appearance Package

It’s frivolous and costs $995, but the carbon-fiber closeout panels on each side of the engine and LED lighting illuminating the engine compartment is a nice touch for the mid-engined sports car. You can get engine covers with different color accents, but in plain black with the bare carbon-fiber being lit up keeps things tasteful when looking through the rear window.C

7. Upgraded Seats

If you’re reading this and want a C8 Corvette, you’re probably planning on driving hard. They’re expensive at $1,995, but the Competition Sport Bucket Seats increase lateral support when cornering at speed on the track, and the high-wear areas are bolstered with harder wearing textiles.

The less hardcore option is the GT2 bucket seats, which look cool, but are more about comfort than holding you in place. For around the same price as the Competition Sport Bucket Seats, you can also get the GT2 seats in two-tone with Sky Cool Gray, Adrenaline Red, and Natural seat colors.

8. Carbon-Fiber Interior Trim

Carbon-fiber trim is played out on cars that don’t deserve it, but we think the C8 Corvette is worthy. The carbon-fiber material replaces the plastic black that holds the instrument cluster with a carbon-fiber frame. It also adds carbon-fiber to the center console below the infotainment screen and to the door switch plates. It’s costly at $1,500, but we think its a must-have if you’re splashing out on the new Corvette.

9. Wheels

The $1,495 Trident Spoke wheels with their Y-shaped elements are going to be a popular box to tick in one of the two finishes available, but we also like the more low-key but stylish 5-open-spoke Carbon Flash-painted aluminum wheels. The Carbon Flash takes the shine off the wheels and helps keep the Corvette looking sleek. A lot of people will be going after-market, but this is a great option for staying stock. There’s no option for size, though, and all styles and colors are for the staggered setup featuring 19-inch wheels on the front and 20-inch discs on the back.

10. Corvette Museum Delivery

Buying a new car, let alone a new Corvette, is not something people often do. That’s why we like the idea of the National Corvette Museum delivery program. You can take a few days and go to Bowling Green, Kentucky, where your car is built and take a tour of the museum where your Corvette will be displayed. Then you’ll have a delivery presentation, followed by a drive-off ceremony. As you road trip home, you’ll be able to admire the personalized interior plaque on the dashboard with your name, VIN, and the NCM logo engraved upon it.

We knew by the time we loaded one up it would get much more expensive than the $59,995 entry level, and optioned out with everything we talk about here, you’re looking at $83,610 before delivery.

 Ian Wright CarBuzz


Rare drawings, documents reveal secret history of mid engine Corvette

From an acclaimed concept car John DeLorean reportedly dismissed because he wanted something “smaller and more European,” to the design that ended a feud between a pair of GM giants — but may have set the Corvette back decades — a trove of unique documents, sketches and models tells a secret history of the 60-year quest to build a mid engine Chevrolet Corvette.

The story begins in the late 1950s with legendary Corvette chief engineer Zora Arkus-Duntov and came to fruition when the first mid engine 2020 Corvette Stingray sold for $3 million at auction in January.

Titled “The Vision Realized: 60 Years of Mid engine Corvette Design” and created by GM Design Archive & Collections, the exhibit included 19 original sketches by designers including Larry Shinoda and Tom Peters, the massive 4-Rotor rotary engine from the 1973 Aerovette engineering, a wood wind-tunnel model, even letters from Arkus-Duntov’s personal files.

“The story of the mid engine Corvette is incredibly complicated, full of fits and starts,” said Christo Datini, manager of the GM Design Archive & Collections.  Cristo Datini at the General Motors Warren Technical Center in Warren, Michigan on Friday, January, 31, 2020

Cristo Datini at the General Motors Warren Technical Center in Warren, Michigan on Friday, January, 31, 2020 (Photo: Eric Seals, Detroit Free Press)

A mid engine Corvette was a dream shared by GM designers and engineers. The layout, in which the engine is behind the passenger compartment and immediately over the rear wheels, improves acceleration and handling. It’s been a mainstay at Ferrari for decades, and inspired repeated design and engineering projects at GM. None of them made it to production till now, largely because the Corvette’s original front-engine layout was so successful.

“Why would we change the Corvette?” GM chairman and CEO Richard Gerstenberg said to Arkus-Duntov before both men retired in the mid-1970s. “We sell every one we can make.”

‘Design without limit’

A generation of GM designers and engineers had already fought that attitude toward the sports car that debuted in 1953 model, and a couple more would before the midengine eighth-generation C8 Corvette Stingray debuted last year.

The exhibition included dozens of sketches, models, photos and documents.

“Our mission is to preserve the heritage of GM Design and educate our designers on GM’s prominence in the world of design,” Datini said. The archive also is working with the Detroit Institute of Arts on a massive exhibition dedicated to automotive design that opens this summer. 

The Corvette exhibition closed at the end of January, but elements of it are likely to be displayed at other events and locations, possibly including the National Corvette Museum in Bowling Green, Kentucky, which provided materials for the collection.Original magazines with drawings of what Corvettes could have looked like on display at the General Motors Warren Technical Center in Warren, Michigan on Friday, January, 31, 2020

Original magazines with drawings of what Corvettes could have looked like on display at the General Motors Warren Technical Center in Warren, Michigan on Friday, January, 31, 2020 (Photo: Eric Seals, Detroit Free Press)

Chevrolet Engineering Research Vehicle I, Also called SERV I and XP-708, was the beginning. A running model that debuted in 1960, the car had the looks of an Indy car and a chassis that tested what a midengine layout could do. It was “a design without limit” and an “admirable tool” to help Chevy figure out “what to put in Corvette,” said Duntov, himself a former driver in the 24 Hours of Le Mans sports car race.

CERV I was used as a test vehicle for years. Larry Shinoda, who would go on to be known as the father of the ’63 Corvette Stingray and the Mako Shark concept car, tweaked its design repeatedly as engineers tested it with seven different power trains.

GM eventually retired CERV I, selling it to the Briggs Cunningham Automotive Museum for $1. When the museum failed in the 1980s, GM bought it back for “somewhat more,” Datini said.A model of the 1968 Chevrolet mid-engine Corvette Roadster that is one of many items for General Motors workers to see at the Corvette design display at the General Motors Warren Technical Center in Warren, Michigan on Friday, January, 31, 2020

A model of the 1968 Chevrolet mid-engine Corvette Roadster that is one of many items for General Motors workers to see at the Corvette design display at the General Motors Warren Technical Center in Warren, Michigan on Friday, January, 31, 2020 (Photo: Eric Seals, Detroit Free Press)

Corvettes the world never saw

Shortly thereafter, Duntov heard rumors Ford was developing a Le Mans racer to challenge Ferrari and launched work on CERV II. GM decided not to race, Ford and Carroll Shelby built the GT40 that inspired “Ford vs. Ferrari,” and the CERV II was used as an engineering test bed at secret proving grounds and never seen by the public during its active lifetime. Built in 1964, CERV II had a 500-horsepower V8, 210-mph top speed and 2.8-second 0-60 mph time.

A picture of the CERV II Corvette. The sports car never went into production but it was influential in the design of the C5 production Corvette. (Photo: Eric Seals, Detroit Free Press)

“By that time, engineers and designers knew a midengine chassis was necessary” to get maximum performance from the ‘Vette, Datini said. Putting the engine behind the passenger compartment puts the car’s weight over the rear wheels to put down more power without spinning. Shifting balance from the production ‘Vette’s nose-heavy weight distribution would also improve handling.

Also in 1964, the XP-819 experimental car was being tested. Designed by Shinoda, it bore a strong resemblance to 1970 Corvettes, but Duntov hated it, calling it an “ugly duckling” at least in part because he wished his engineering team got some of the budget allotted to designing the car. It had a 327 cubic-inch V8 and pop-up headlights.

Like many concept and engineering vehicles, XP-819 was destroyed, chopped up. Years later, the pieces were found in NASCAR designer and mechanic Smokey Yunick’s garage.

Half Corvette, half Porsche

With a name GM would later recycle on a minivan, the Astro II XP-880 was never publicly identified as a Corvette, but it was one, intended for production in 1970, but never got there. It debuted at the New York auto show, featuring a nose, front fenders and Firefrost Blue paint that that foreshadowed 1970s production cars.

DeLorean, then Chevrolet general manager, asked for a rush program to create a different midengine design to match the midengine Pantera Ford was developing with Italian sports car maker De Tomaso to debut at the 1970 New York auto show. The XP-882 had a tapering body with dramatic fender flares and a louvered rear window like the Mako Shark II concept car. Like so many midengine ‘Vettes before and after, GM brass decided to stick with the tried and true front-engine layout.

Also in the 1970s GM president Ed Cole — another legendary engineer who led the development of the small block V8 and catalytic converter, among other achievements — became enamored with the Wankel rotary engine. Duntov built two midengine experimental ‘Vettes with rotary engines, glad for Cole’s support despite not sharing his enthusiasm for the engine.Sketching and notes about the Corvette, one of the many originals on display for workers to see at the General Motors Warren Technical Center in Warren, Michigan on Friday, January, 31, 2020

Sketching and notes about the Corvette, one of the many originals on display for workers to see at the General Motors Warren Technical Center in Warren, Michigan on Friday, January, 31, 2020 (Photo: Eric Seals, Detroit Free Press)

The 1973 Corvette 2-Rotor XP-987GT was a smaller, European-scale sports car with a rotary engine. The body was all Corvette, but its chassis came from a Porsche 914. Italian design house Pininfarina built its body. GM displayed the 2-Rotor at auto shows in Frankfurt and Paris before the car disappeared, probably sold to a collector.

Bill Mitchell’s most beautiful car

At the same time, Duntov wanted to develop a bigger midengine Corvette. He and Cole hadn’t been on speaking terms since Duntov refused an annual bonus he thought was insultingly small. They made up, at least in part because Duntov wanted a budget to develop what would become the Corvette 4-Rotor Aerovette, an iconic, gull wing design. Duntov believed it was the most beautiful vehicle GM design chief Bill Mitchell oversaw in a career that included the ’57 Chevy Bel Air and ’66 Buick Riviera. 

Duntov recycled the XP-882’s chassis for the Aerovette, which featured silver leather interior trim.A picture of the Aerovette featuring bi-fold gulping doors in the sports car that was never made. It is one of many photographs, drawings and sketches on display on all things Corvette design inside the General Motors Warren Technical Center in Warren, Michigan on Friday, January, 31, 2020

A picture of the Aerovette featuring bi-fold gulping doors in the sports car that was never made. It is one of many photographs, drawings and sketches on display on all things Corvette design inside the General Motors Warren Technical Center in Warren, Michigan on Friday, January, 31, 2020 (Photo: Eric Seals, Detroit Free Press)

Despite the car’s striking appearance, Duntov would come to believe his agreement to use a rotary engine was a nail in the midengine ‘Vette’s coffin.

Despite that, another midengine engineering car arrived in 1974. The XP-895 began its life with a steel body. Intrigued by the idea of lightweight materials, DeLorean asked Reynolds Aluminum to create an aluminum body. That cut the car’s weight by nearly 40%, but DeLorean pulled the plug on the project because he wanted a smaller, more European design.

That never happened, and design work on midengine ‘Vettes came to a halt for more than a decade, as GM struggled meeting the challenge of higher fuel prices.

Closing the deal

By 1986, the quest for a midengine Corvette was ready to create another giant figure, and it got one when a young designer named Tom Peters began work on the Corvette Indy concept car. Peters went on to become the chief designer of the sixth- and seventh-generation C6 and C7 Corvettes and play a key role in starting work on the 2020 C8.

With a radically short hood compared to production ‘Vettes and cutting-edge technologies including four-wheel steering, traction control and active suspension, the Indy — so named because it used a 2.65L V8 Chevy developed for Indy Car racing —  kept dreams of the midengine ‘Vette alive

The 1990 CERV III — this time the C stood for “Corporate,” not Chevrolet Engineering Research Vehicle — was the next step. Datini’s research convinced him it was an attempt at a production version of the Indy.

CERV III had scissors doors and was built of Kevlar, carbon fiber and aluminum. With a 650-hp twin-turbo 5.7L  V8, GM predicted a top speed of 225 mph. It debuted at the 1990 North American International Auto Show in Detroit.

After that, work on the midengine Corvette went undercover for two decades. Photos of disguised prototypes at test tracks surfaced from time to time, but the car seemed to be as much myth as metal. There are whispers the Great Recession halted work on one, setting development back years.A display of Zora Arkus-Duntov known as "The Godfather of  the Corvette" at the General Motors Warren Technical Center in Warren, Michigan on Friday, January, 31, 2020.

A display of Zora Arkus-Duntov known as “The Godfather of the Corvette” at the General Motors Warren Technical Center in Warren, Michigan on Friday, January, 31, 2020. (Photo: Eric Seals, Detroit Free Press)

Development of the 2020 Corvette Stingray began around eight years ago, a long time for most projects, but the blink of an eye when it’s the last chapter of a 60-year story.

Mark Phelan for Detroit Free Press


Chevrolet Celebrates the Start of Regular Production for the 2020 Corvette Stingray

Zora’s dream of bringing a mid-engine Corvette to market has finally been fulfilled!

Chevrolet is celebrating the Start of Regular Production (SORP) of the 2020 Corvette Stingray today and they shared this photo of a Black mid-engine Coupe on the Corvette assembly line in Bowling Green, KY.

The car is the VIN 001 Corvette that was purchased by Rick Hendrick for $3 million last month at Barrett-Jackson. Chevrolet told us previously that the first mid-engine Corvette produced for customers would be a Black Coupe with the Z51 package.

Here is Chevrolet’s tweet celebrating the start of C8 production from this afternoon:


Chevrolet is saying that initial vehicle shipments to dealers are expected to begin in late February or early March.

Congratulations to all those who worked on the new Corvette to get it to this point and we are excited for all of our friends that have a new C8 Corvette on order. The new Corvette Stingray is a grand slam home run for Chevy and from it, we will see a paradigm shift in how people will view mid-engine sports cars in the future.

And with VIN 001 coming of the Corvette assembly line today, that future is now!

Update
Chevrolet also offered up this trailer for a documentary of the C8 Corvette’s development called Revolution:

Corvette Blogger


Corvette Heaven: 2020 Corvettes at the Corvette Assembly Plant

[PICS] Corvette Heaven Part II: 2020 Corvettes at the Corvette Assembly Plant

Following Jeremy Welborn’s insightful post last week on Customer Ordered 2020 Corvette Production Starting, a reader left a comment about stopping by the Corvette Assembly Plant and seeing twenty-five C8 Corvettes in the parking lot. Thanks to Jeremy’s follow-up, Jay sent us some of his favorites that he took and gave us permission to share.

We’re calling this Corvette Heaven Part II as it seems to dovetail perfectly with yesterday’s blog post with an instagram video showing fifteen 2020 Corvettes lined up in a row.

From Jay Shellabarger:

I was at the Bowling Green Assembly Plant and Museum to see Shane for my Museum Delivery on Thursday, January 30th from 2:30pm to 4:30pm. I went directly to the Assembly Plant and looked at twenty-five C8 Corvettes in the parking lot and I took a hundred photos. I had been told all the pre-production cars would be smashed. I read where you state the VIN numbers are 5100001. Starting with 51 and all the cars I saw started with 50. I took photos of the VIN numbers too. I saw cars 5000028 (#28), 30, 56, 62, 124, 137, 138. 139 many up to number 5000375 (#375). I had a fun afternoon driving into the different parking lots (including employee parking lots) and looking at the C8’s produced. They are simply BADASS looking and I can’t wait to obtain my white C8.

Jay managed to capture nine of the twelve colors and several cars have full-length body stripes. We noticed that Jay also captured a Sebring Orange 2020 Corvette Stingray Coupe wearing thr 5VM Visible Carbon Fiber Aero Kit:1

TITLE

Jay tells us he has an Arctic White C8 Coupe on order and he is customizing it with the High Wing and he also tells us he’ll be adding his own stripes to the car as well as chrome wheels! Sounds like a stunner, Jay!

Here’s the photos of the C8 Corvettes from the Bowling Green Assembly Plant last week:

Midyear Monday!
Midyear Monday!
Midyear Monday!
Midyear Monday!
Midyear Monday!
Midyear Monday!
Midyear Monday!
Midyear Monday!
Midyear Monday!
Midyear Monday!
Midyear Monday!
Midyear Monday!
Midyear Monday!
Midyear Monday!

Midyear Monday!
Midyear Monday!
Midyear Monday!
Midyear Monday!
Midyear Monday!
Midyear Monday!
Midyear Monday!
Midyear Monday!
Midyear Monday!
Midyear Monday!
Midyear Monday!

Source:
Photos by Jay Shellabarger


THESE LEGENDARY ‘LOST CORVETTES’ COULD BE YOURS

Imagine yourself in the driver’s seat of one of these 36 beautifully restored ‘Vettes.

Lost Corvettes (4)
Courtesy

Way back in 1989, when VH1 was still airing music videos, the cable network held a promotional sweepstakes in which one contestant could win a collection of 36 Chevrolet Corvettes, one from each the storied American sports car’s first 36 model years. 

Lost Corvettes (1)
Courtesy

Long Island, N.Y. carpenter Dennis Amodeo won the sweepstakes, but then sold his coveted prize to famed German pop artist Peter Max, who intended to use each car as a canvas, but never followed through, as USA Today notes. 

Lost Corvettes (5)
Courtesy

The vintage ‘Vettes ended up deteriorating in New York City garages for nearly a quarter century, out of the public’s eye. Fortunately, the restoration specialists at Corvette Heroes bought the entire collection from Max and are bringing the so-called “Lost Corvettes” back to life for a new sweepstakes, proceeds from which will go to the National Guard Educational Foundation.

Lost Corvettes (3)
Courtesy

Additionally, six of the rarest and most iconic Lost Corvettes are being shown at the Chicago Auto Show from February 8-17: 

  • ’55, one of 700 built and the first year a V8 engine appeared in a Corvette
  • ’56, one of 290 in the rare color of Cascade Green; this car was driven by Jerry Seinfeld in an episode of “Comedians in Cars Getting Coffee” with Jimmy Fallon
  • ’57, featuring its original 283/245 horsepower engine with dual-quads
  • ’66 coupe featuring its original colors of Nassau Blue with a stunning White interior
  • ’67 convertible, a replica of the world-famous Ko-Motion Corvette
  • ’69 coupe, a replica of the rarest production Corvette ever built: the 1969 ZL1 
Lost Corvettes (6)
Courtesy

Individual tickets to enter the giveaway can be purchased for $3 or in ticket bundles for prices ranging from $10 to $7,200. Visit www.corvetteheroes.com or www.thelostcorvettes.com for more details. 

Lost Corvettes (2)
Courtesy

Source: Maxim Staff


Mid-Engined Chevy Corvette C8 Production Has Started: Report

[UPDATE] Contacted by Motor1.com, GM spokesperson Chris Bonelli says production of the new Corvette will begin in February.

It’s a great day for those who have signed their names on the dotted line to buy a C8 as it appears production of the mid-engined Corvette has finally started. The eighth generation of Chevrolet’s popular sports car was originally scheduled to hit the assembly line towards the end of 2019, but the UAW strike took its toll and forced General Motors to push back production until February.

It looks like they’ve managed to get everything ready a few days sooner, with production at the Bowling Green, Kentucky factory now underway. The reveal comes to us from Chevy salesperson Mike Davenport through his YouTube channel called “Chevy Dude” where he regularly posts videos about everything interesting that’s going on related to the C8 and other models that have the bowtie emblem. He was the first to break the news about Chevy cutting back on dealer allocations for the Corvette’s 2020 model year, which was shortly confirmed to Motor1.com by a spokesperson.

It goes without saying Chevy Dude is talking about the production of customer cars, including his very own C8. Another tidbit revealed is about the cancellation of the optional exposed carbon fiber ground effects for the 2020MY due to supplier issues. If you have ordered the car already with this option, Chevy will have no other way but to delete it.

For those who haven’t pre-ordered the new Corvette and are interested in getting the 2020MY, it appears April is going to be the last month when dealers will be able to ask Chevy for cars. Interestingly, Chevy Dude also knows the production of the mid-engined sports car will transition to the 2021MY in September.

That effectively means the initial model year of the C8 will only be in production for about seven months. We also get to learn the first cars will hit dealers across the country around mid-February or closer to the end of the month.

As you might have heard already, the 2021MY is rumored to come with a price bump, but nothing is official at this point. All we have for the time being is a rumor originating from a “well-placed source” cited by Motor Trend who is saying the Corvette will lose the sub-$60,000 sticker. Chevy Dude doesn’t expect the price increase to be significant, based on his 20-year experience in selling cars and analyzing Corvette pricing changes from one model year to the next.

Motor1.com has reached out to Chevy for comment and will update the article if we get a response.

Source: Chevy Dude / YouTube


ROLEX 24 AT DAYTONA – AN IMPRESSIVE DEBUT FOR THE NEW CORVETTE C8.R

The 58th Rolex 24 at Daytona, the first round of the 2020 IMSA WeatherTech SportsCar Championship season, saw the first race for the new Corvette C8.R, the participation of an all-female driver line-up, 2019 NASCAR champion Kyle Busch’s first start in a 24-hour race and Ben Keating at the wheel of two different cars.

A NOTEWORTHY DEBUT FOR THE NEW CORVETTE C8.R

The #3 Corvette C8.R finished the first 24-hour race of its career in fourth place in GTLM (the equivalent of LMGTE Pro at the 24 Hours of Le Mans). Drivers Antonio García, Jordan Taylor and Nicky Catsburg encountered zero problems with the car and completed 785 laps (nearly 5,000 kilometers). Unfortunately, the same cannot be said of the #4 Corvette C8.R of Gavin-Milner-Fässler. As the car was in the top 5 in its class going into the ninth hour, an oil leak caused the car to return to its garage. The leak was found to be in an area that forced the mechanics to remove the engine for repair and the work took almost nine hours. The #4 was then able to hit the track again and finished the race in 36th place.

Much like the 24 Hours of Le Mans, the 24 Hours of Daytona is an extremely challenging race. To make it to the checkered flag with an all-new car is already a major accomplishment for Corvette Racing. The American team’s next stop is the 6 Hours of the Circuit of The Americas on Sunday 23 February in Austin, the fifth round of the 2019-2020 FIA World Endurance Championship season.

AN ALL-FEMALE DRIVER LINE-UP

All-female driver line-up Christina Nielsen, Katherine Legge, Tati Calderon and Rahel Frey shared GEAR Racing powered by GRT Grasser’s Lamborghini Huracan GT3 in the GTD class, but the car was forced to retire after a fire.

KYLE BUSCH ENJOYS HIS FIRST ENDURANCE RACE

2019 NASCAR champion Kyle Busch took the start in his first Rolex 24 at Daytona at the wheel of the AIM VASSER SULLIVAN team’s Lexus RC-F GT3. Along with teammates Parker Chase, Jack Hawksworth and Michael de Quesada, Busch finished 26th overall and ninth in the GTD class. The American driver pulled off a double and a triple stint without the slightest mistake and said after the race he really enjoyed the experience and hopes to return for the overall win.

BEN KEATING DOUBLES DOWN

Ben Keating participated in his 10th Rolex 24 at Daytona at the wheel of not one but two cars: the #52 ORECA 07 fielded by PR1 Mathiasen Motorsports in the LMP2 class and the #74 Mercedes AMG-GT3 fielded by Riley Motorsports in GTD. Both cars crossed the finish line, the #52 ORECA 07 in 10th place overall and second in its class two laps from the winners, and the #74 Mercedes AMG-GT3 in 29th place overall and 11th in its class. This was the fifth time Keating participated in the race with two different cars.

Source: 24H LE MANS


Big C8 news!

And we literally mean “big.”

With production of the all-new 2020 Chevrolet Corvette Stingray about to get underway next month, attention is now turning towards future variants. More specifically, the E-Ray, the first of two hybrids planned (the second likely named Zora), as well as the Z06, and, eventually, the ZR1. While we don’t have a precise timeframe as to when any of those will arrive, it goes without saying the Corvette engineering team led by Tadge Juechter is hard at work this very moment.

Details remain mostly vague, but GM Authority has learned something very cool about the C8 Z06. An inside source familiar with the project is claiming the C8 Z06 will sport a massive rear wing, even bigger than what’s found on the outgoing C7 Corvette ZR1. What’s more, it’ll produce higher levels of downforce and create less drag.

Although the C8.R race car has a big rear wing of its own, the Z06’s will differ in both appearance and functionality. Think more along the lines of the rear wing on the Koenigsegg Agera RS. Another unknown is whether or not the C8 Z06 will come with the rear wing as standard or if it will be optional. Some sources are claiming the Corvette team is leaning towards making it standard.

Assuming all goes to plan, the next Z06 could arrive in about two years’ time. Instead of the naturally aspirated 6.2-liter V8 with 490 horsepower and 465 lb-ft of torque, the C8 Z06 is expected to have a new NA 5.5-liter V8 with a flat-plane crank. Expect somewhere in the neighborhood of 600 hp.

Additional elements will include an improved suspension, brakes, and additional aerodynamic components aside from the rear wing. There shouldn’t be any mistaking the C8 Z06 for the C8 Stingray, even when the latter is equipped with the Z51 performance package. It should also go without saying the Z06 will command a significant price premium. A fully-loaded 2020 Corvette Stingray will surpass $100,000, so don’t expect the Z06 to cost any less.

Source; Jay Traugott; Carbuzz


Corvette Poised for Sebring WEC Return

#3 Corvette Racing Corvette C8.R, GTLM: Antonio Garcia, Jordan Taylor, Nicky Catsburg

Corvette Racing set for COTA-Sebring double FIA WEC run with C8.R

Corvette Racing looks set to contest the 1000 Miles of Sebring, in what would be the second consecutive FIA World Endurance Championship outing for the new Chevrolet Corvette C8.R.

Sportscar365 has learned that provisional plans are in place to run the Sebring WEC race alongside its two-car factory GT Le Mans class program in the Mobil 1 Twelve Hours of Sebring the following day.

It would come as one of the prerequisites from the ACO, which has stipulated that the Pratt & Miller-run team must run in at least two regular-season WEC races in order to be guaranteed a pair of GTE-Pro entries for the 24 Hours of Le Mans.

The team ran the Shanghai WEC race in 2018 in addition to Sebring last year with its previous-gen Corvette C7.R.

While declining to comment or confirm on any WEC plans beyond its COTA entry, Corvette Racing program manager Doug Fehan said that it’s been their intention to run two regular-season races in the 2019-20 WEC season.

“Right now, that’s the plan but we’re running down a road,” Fehan told Sportscar365.

“We haven’t refined what exactly that plan is going to be. I couldn’t give you every detail and widget.

“We’ve been busy for a couple of years trying to race and design, build and develop the new car. This adds to the challenge of all of that.

“I think most people would understand that we don’t have it completely defined yet.

“It’s a case of dealing it in an orderly fashion.

“We can’t become overwhelmed too much with what’s going on down the road when we have to focus on what we need to accomplish [in Daytona] in a couple of weeks.”

While set to give the new mid-engined GTE contender its competition debut in the Rolex 24 at Daytona later this month, the car’s second race will come just four weeks later at Circuit of The Americas, with a single entry having been submitted for the WEC replacement round.

Fehan said details on that program, including drivers, have yet to be determined.

He explained the reason for doing the additional WEC races is to “try as best we can” to support the globe-trotting championship.

“We understand the value that has to the sanctioning body and the value to the global fan base,” he said.

“We know it’s important but they also know the business side of it that prevents us from doing both things. They get that.

“I think they also appreciate how hard we’re trying to make all of the accommodations we can to keep the ball moving down the field. 

“It’s not easy for us and they know it’s not easy for us and they appreciate that.”

No Issues in 2019 ‘Super Sebring’ Endeavor

Fehan said the team faced no issues in its double-duty endeavor at Sebring last year, in what was only the second-ever time the team raced three cars between two different series on the same weekend. 

In addition to its over-the-wall crew and several other staff, drivers Antonio Garcia, Jan Magnussen and Mike Rockenfeller took part in both Friday’s eight-hour WEC race and the around-the-clock IMSA enduro the day later.

“That worked out great,” Fehan said. “We were lucky because we had enough equipment.

“It’s not like you can piggyback what you have set up. You’ve got to have a completely additional set of stuff.

“Between stuff that we had in stock and stuff that we had for the Cadillac program, we had enough in place.

“That system is getting better and we learned from that on all the things we did right and all the things that we know we could improve upon.”

Source John Dagys; SportsCar365


Fassler impressed after first laps in new Corvette

The waiting is over for Marcel Fassler. This weekend’s Roar Before the Rolex 24 was the first opportunity for the three-time Le Mans winner to drive the revolutionary mid-engine Corvette Stingray C8.8 — either in a test or even on a simulator — and he likes what he’s found.

“I heard really good things beforehand, so I was really looking forward to my very first drive,” said Fassler. “I finally got my first chance on Friday, and I am more than positively surprised how good and how much fun it is to drive. It’s difficult to compare both cars, because they are completely different in how they were built and set up, but this is a big step forward. I’ve enjoyed every lap in this car around the track.”

Fassler won GTLM honors as part of a 1-2 outing for Corvette Racing in his Rolex 24 debut in 2016, with his car prevailing by 0.034s in the closest class finish in event history. The 43-year-old Swiss driver enjoyed the changing conditions at the Roar — which have ranging from a warm Friday to a wet Saturday to a sunny but chilly Sunday — as he tested the silver No. 4 Stingray with Tommy Milner and Oliver Gavin.

“The weather this weekend is the best we could have,” Fassler said. “Now we know hot conditions, we know wet conditions and today we’ll work with colder conditions. Experience shows that everything can happen at Daytona. It can be super warm or freezing cold, or a lot of rain like last year.”

Antonio Garcia, who shares the traditional yellow No. 3 Corvette with Jordan Taylor and Nicky Catsburg, was also pleased with the progress of the C8.R.

“It’s going the right way,” said Garcia, a two-time Rolex 24 winner. “We’ve got to gather as much data as possible to prepare for the first race of the season — the first race for the actual car. It’s going to be very difficult for us, because we don’t know how the car is going to behave, with a lot of unknowns. I think we’re as prepared as we can be, and we are using this test to be even more prepared. So far, it’s going well. But in racing, you never know. We’re probably the best team out there to get with a new car, and so far it looks good and drives good. I can’t wait until the start of the race.”

Corvette Racing Program Manager Doug Fehan shares the optimism of his drivers.

“Everything operationally has worked out well,” Fehan said. “The cars are performing well. We haven’t had any major issues in durability and reliability — things we are looking for here. Every day we come out we write another page in setup and learning about the chassis and aero on the car. So every lap’s an important lap.”

Original Source: J.J O’Malley; Racer


Garcia: “Big Steps” to Come With Corvette C8.R at Roar

Corvette Racing drivers on anticipation of Roar Before Rolex 24 with new mid-engined C8.R…

Antonio Garcia believes there will be “big steps” to come in the Chevrolet Corvette C8.R’s development as the new-for-2020 mid-engined GT Le Mans class contender makes its public debut in this weekend’s Roar Before the Rolex 24.

The Pratt & Miller-built Corvette, along with Porsche’s 2019-spec 911 RSR, are the two all-new GTE-spec cars set for their first official competitive outings in IMSA WeatherTech SportsCar Championship competition during the three-day mandatory test.

While having already completed private testing at the 3.56-mile oval/road course, Garcia believe every lap will matter in their plan for the weekend.

“There is a lot to discover and develop,” Garcia said. “Usually your starting point is better than what you previously had.

“But this is completely different. We are still in the early stages with this new Corvette.

“There will be big steps for sure.

“I don’t know when we will get to the point where we will start making little steps. We need to run this car and we need to race it to find out where we are against our competition.

“We are concentrating on our own work. Whenever it becomes race time, we will know where we actually are.”

Garcia’s new full-season co-driver Jordan Taylor said they won’t necessarily be concerned about pace at the Roar, which will also set the pit lane and garage allocations through a qualifying session on Sunday morning.

The 28-year-old, who makes the switch from his family’s Wayne Taylor Racing operation, said little things, such as driver changes, will be a focal point as well once they achieve the targeted baseline.

“As many laps as we can get at the Roar and going through the program, getting all the drivers on the same page from a setup point of view and then the little things like pit stops and driver changes will be different than what we’ve had in the past,” he said.

“The car is a little more tricky to get in and out.

“Understanding that muscle memory of the process of getting in and out, where the seatbelts go, where the drinks bottle is, where the air hose goes… those little details that we haven’t refined that were refined with the C7.R are things that will show up in a 24-hour event, so those are things we will need to check off the list at the Roar.”

Gavin: “Very Structured” Plan for Weekend

Team veteran Oliver Gavin, who returns to the No. 4 entry alongside Tommy Milner, said that coming away with achieving 60 or 70 percent of their list will be considered a “big win” over the weekend.

“The team is going to have a very structured plan,” Gavin said. “And that’s one of the things that’s so good about Corvette Racing. We plan our time and fundamentally understand what all we have to work through and the list of things we need to achieve.

“The third drivers will need time in the car. We’ll all have to work through that program and procedure as best we can.

“Certainly we’ll learn a huge amount every time we go on track just with how certain tires work, how the braking package works, the aero setup, weight placement… all kinds of different thoughts that the team will look to work through.

“We know that of that list of 50 things we want to try and achieve, the chances are that if we can come away with 60 or 70 percent of that done, it’s a pretty big win.”

Original Source; John Dagys. Sportscar365


Chevy Corvette C8 vs. Ford Mustang Shelby GT500: A Track Comparison

Forget Mustang vs. Camaro. Ford’s Shelby GT500 is ready to challenge Chevrolet’s flagship C8

Mustang vs. Corvette? Go ahead, pinch your thumb and index finger to the bridge of your nose, squint your eyes, and blink hard. When you look again, the words on the page won’t have changed.

Rarely has MotorTrend conducted (or concocted) such a bold comparison. But it’s a mad, mad new world we’re in now. Forget the Blue Oval’s sacrosanct rivalry with Camaro, which had always left the Corvette to chase the elusive, pricier Porsche 911.

Oh sure, the base pony car models will still compete, same as always. But the top-end Mustang GT500 is so excellent it deserves higher-octane competition. The final piece of evidence: The Mustang Shelby GT500 costs more than Chevrolet’s new mid-engine Corvette supercar when similarly equipped. Game on.

The C8 Corvette and Shelby GT500 have stirred up more buzz than anything else that’s come from the Motor City in recent memory. After decades of teases and concepts, the ‘Vette finally slides the engine back in the chassis to join the transaxle aft of the driver’s derriere. And after the extremely successful Shelby GT350, which finished a sharply creased second place in our 2019’s Best Driver’s Car, Ford brought in even heavier artillery with a load more horsepower and torque.

These two contenders offer different kinds of appeal, both inspiring great desire in the high-performance enthusiast world. Both offer capabilities that measure well against far pricier foreigners, without the kind of sacrifices that used to come with the label “Made in America.” Gone (mostly) are the long-muttered utterances about cheap features and fixtures, crude handling, and lack of refinement.

Of course, when you look inside these two cars, there’s an immediate difference. The Corvette is an American interpretation of a mid-six-figure European supercar; the Shelby has nearly the same interior as that rental Mustang convertible at the Hertz counter at LAX—albeit with better seats and some minor brightwork tacked on to disguise its cheesy rotary shift knob and plasticky switchgear. Ford’s interior guys still have some work to do before they can declare their Shelby variants to be world-class premium.

But this is not a comparison test for value shoppers who peruse our Buyer’s Guide, niggling over inches of legroom and warranty coverage.

This is a track test—the literal interpretation of where the rubber meets the road.

The C8 Corvette has come of age—finally, I might add—with a style and behavior that bring to mind a word like “sophistication.” The Corvette’s new shape will sit well with the German and Italian exotica in the valet lot at the country club.

The Shelby GT500 comes from another, more purely American place, the pony car. But since the arrival of the S550 chassis in 2015, the muscular Mustang and its more powerful derivatives have risen above the hot rods of yore, to compare well with European icons.

The ‘Vette excels with exotic appearance, precise and agile handling, and balanced power with a nice rush of strong, smooth, jetlike urge. The Muscle-tang crushes like a bodybuilder with brains. Its huge forward forces do not overwhelm its chassis, as in many of the beloved classics we’ve known before.

The C8 Stingray carries a lithe, striking new shape that will grab attention from a block away. Its lines do a terrific job of conveying more of a sense of value and beauty, yet it’s still imbued with a half-century-plus of genetic identifiers. I predict this car will generate more than a few “Oh, wow!” reactions from the public long after it has gone on sale.

The Mustang is a beefed-up beast with bulging biceps, based on our well-known sporty coupe. It will light up the pony car crowd, certainly. But among the elites, the Shelby’s familiar muscle-bound shape may still result in upturned noses, window-rattling V-8 rumble or not. Where the Mustang scores more points in this contest is in its competence in motion.

At speed, the ‘Vette’s strongest dynamic assets are described in a list of two: first, low polar moment, and second, forward traction. Chevy engineers have created a machine that benefits in exactly the ways it should: more centralized mass and the resulting rearward weight bias.

The Corvette has long been the bad boy of the racetrack, the Bart Simpson of supercars: rude, loud, cheap, unpredictable, and hard to handle, but fast and fun in its own brash way. Now, the Corvette has finally grown up. The C8 Corvette is more sophisticated, capable, and mature.

When the majority of the weight in a chassis is nearer the center of gravity, the car will change direction more eagerly. Formerly carried way up front under those arching fenders, the big engine actually resisted the steering tires as they tried to pull that hunk of metal around to face the apex of a turn. The amidships engine makes the steering feel responsive, more direct, and more precise. It’s less work. The new ‘Vette slices its way into a bend in a most delightful way.

Too much, sometimes—and this is the tricky part of the setup. Quick response can overwork the rear tires and create oversteer. In several high-speed tests, and again here at Virginia International Raceway, we have found some of that in the C8’s track personality. It really will point to the apex entering a corner and sometimes overdo it and end up sideways, with the widely adjustable stability control switch fully off (thank you for providing us with that choice, Chevy).

But when you apply your American V-8 torque, then you find the greatest improvement in driving the American Sports Car: It puts ponies to pavement. The C8 hooks up. Chevy has taken advantage of placing the engine over the rear wheels, and that loading successfully creates forward thrust far better than any Corvette before. The new ‘Vette launches hard from a slow corner or a stoplight/dragstrip. Check out that 0-60 time, beating cars with far higher power ratings and even some with all-wheel drive. That, my friends, is traction.

In fact, the ‘Vette transfers weight rearward so well that it sometimes goes into another kind of slide: understeer. The front loses grip a bit prematurely as a result of the light front loads. What to do? Is it bad? No, but this is a brand-new baby, and there’s still something to be learned. We believe we will see the C8 Corvette improve further as the Chevy team learns more about this all-new mid-engine phenomenon.

In street-tuned mode dashing around VIR, the ‘Vette revealed deliciously instant steering response. It was quick and stable as I carved into a corner, and it revealed snappy trailing-throttle oversteer when I released the brake. Both are clearly influences of the mid-engine low polar moment.

As I accelerated off slow corners, like VIR’s Oak Tree, the C8’s ground-gripping traction rockets the car forward, and it remains well balanced even though it feels like it might wheelie. I found a consistent gradual side slip in third and fourth gears exiting faster sweepers. The C8 has more power oversteer at 80 mph than it does at 40, which is unusual.

The new Corvette’s braking was strong and stable with moderate nose dive. There was some isolation, if not the degree of e-pedal numbness I feared, and the brakes were cooled with some really nice Z51 brake ducts. Last, there was no more float, better suspension damping, but not harsh.

Crawling under the hood, we then adjusted the C8’s suspension to its track settings—which simply comes down to much more negative camber, front and rear. When added to the 8 degrees of caster (the same in Street or Track mode), the Corvette creates camber gain when the wheels are turned, which is especially good for tight turns, and a strong self-centering force for stability and good on-center feel.

High caster will also cross-weight a chassis because the outside wheel swings in an arc upward as the inside wheel swings down. These will both typically work to reduce the understeer that we squawked about in earlier tests.

The effect of the added camber was much improved grip everywhere, reducing but not eliminating traits of midcorner understeer and drop-throttle oversteer and raising speeds with better manners. The basic traits of midcorner understeer and trailing-throttle oversteer were still there, just not as much.

In Track setup, the Corvette’s lap times improved by 2 to 3 seconds with less falloff and better grip on a long run. Tying this all together was an eight-speed dual-clutch transmission that worked quite well at full chat, completing the performance of a much improved product. Far more than deserving of the title, this fresh offering is a 21st century new chapter, with more room to improve. One step back with the engine is a giant leap forward for the Stingray.

The GT500, on the other hand, has sprung from the loins of another highly regarded thoroughbred, the GT350. As such it comes from a known source that has been developed for years. It shows on track, especially.

Whereas the C8 is precise, the GT500 hoons. Toss it around. Grab it by the scruff of the neck. This pony encourages aggression. Its version of refinement manifests in confidence for the driver. And the GT500 works in both standard and Carbon Fiber Track Pack form. It is beautifully balanced on track. The steering stays alive all the way through a corner. Quick turn-ins show no evil twitches. Pouring on the ponies rockets it down the straights, and slides come slow and controllably. Within reason.

There’s that word again: reason. Use it when you squeeze down the Shelby’s accelerator. The supercharged cross-plane Coyote-based V-8 clearly makes all of its advertised 760 horsepower. This is another step into the Brave New World of high technology, and overeagerness with that gas pedal will be rewarded with jail and/or hospital time.

Every one of those ponies made themselves known as the Mustang devoured the long back straight at VIR, touching nearly  170 mph, lap after lap. No power fade here, unlike some other American blown V-8s making similar numbers.

The Coyote belts out a stirring bellow or calms to quiet as a mouse with just a switch of the electronic valves in the dual exhaust, allowing you to decide whether to wake the neighbors.

All that thrust goes through a new Tremec dual-clutch seven-speed that exhibited fine behavior on the street and flat out. Manual shifting during a hot lap is just a distraction, and the GT500’s auto mode rivals Porsche’s PDK (yes, really) and does everything I would do, anyway. It even had the savvy to hold a higher gear in places rather than constantly throw out raucous downshifts.

On straights, there’s a rewarding “over-torque” feature that gives a little extra shove on each shift, like a manual power shift. Yet in corners, I felt the Tremec smooth those out. Impressive. The track program is really dialed in. The Ford team should be proud.

This thrust twists a trick carbon-fiber driveshaft into a Torsen gear-type limited-slip differential—a good choice for a front-engine chassis because it doesn’t lock up much off power. This helps get the GT500 pointed into the turn, and it’s also a non-wear item, unlike the clutch-type diffs.

If the driver remains very responsible with the right pedal, the Shelby is responsive and stable. The MagneRide shock system soaked up the curbs and bumps, but it floated a bit under the loads of pro speeds. Happily, though, when the PS4S tires did break loose, it was mostly a gradual, even enjoyable experience. The GT500 has that magic combination of steering response at the limit: the ability to tighten its line while loaded laterally in the middle of a corner, without losing grip at the back.

The Shelby handles this great grunt very well—even with its traction/stability control fully disengaged. (I don’t recommend this unless you’ve completed several professional driving schools, one of which Ford offers with the purchase of a GT500, or have won Daytona at least once.) It’s an incredible thrill, breathtaking, to lay the pedal to the metal. But it requires skill to handle that thrill.

Stopping this rig were perhaps the largest rotors (16.5 inches) and Brembo calipers I’ve yet to experience. Although the big Shelby could dive deep, deep into the tight corners VIR presents at the culmination of its long straights, it was here I could find my only real complaint: a bit of a long brake pedal, which was a little disconcerting at 170 mph. No fade but some squish. They even bled the brakes for me, yet both test Shelbys felt spongy. This was surprising because I recall complaining that the GT350’s brakes were too strong, requiring only a big toe. Perfect would be somewhere in between

The incredible performance capability of the new Shelby (especially with the Carbon Fiber Track package) moves the Mustang into the supercar realm, it pleases me to claim. Both Shelby models provide such thrills that they represent good value even at these prices—driving with confidence-inspiring and consistent speed that is rare to find at any price.

So, to the numbers: Lap times for the C8 Z51 and the standard GT500 were quite comparable, though achieved in different ways. The Shelby evaporates the straights; the C8 carves the corners.

The Shelby carries the load of your family, so in spite of its fantastic, predictable balance, the Corvette can leave it in the twisties, driven precisely.

Once we tried the GT500 equipped with the Carbon Fiber Track package, however, it was all over for the street ‘Vette. The CFTP Shelby is magic on the racetrack, wearing R-compound Sport Cup 2s, carbon wheels, lower and firmer springs/bars/shocks, a proper wing and hell-yes-they-work aero fitments, and much more. Fire it up, and the Shelby is long gone in a blaze of glory.

So here’s the greatest difference between these fantastical motorcars. Shelby: raging, proficient power. C8 Corvette: precision, potential, and style. The price, similar. The choice, yours. The pleasure, ecstatic.

Source; Randy Pobst: MotorTrend


This Corvette achieved supercar-rivaling speed without a single drop of gasoline

Several companies are developing electric supercars but, for now, the fastest one of all is a modified Corvette.

Maryland-based Genovation Cars built an electric Corvette called the GXE, and that car just hit 211.8 mph at the Kennedy Space Center in Florida. That’s the same as a Ferrari SF90 Stradale. Genovation claims that is also a world record for a street legal electric supercar, but the company was competing against itself. The GXE set the previous record of 210.2 in September 2019.

The GXE boasts 800 horsepower, which is 45 hp more than the 2019 Corvette ZR1 — the most powerful production Corvette ever. The GXE is also based on the same C7-generation Corvette platform as the ZR1, rather than the mid-engined Corvette C8. However, the GXE is a hair shy of the ZR1’s 212-mph top speed — for now, at least. Genovation claims the electric car is capable of more than 220 mph. It will need that kind of speed to beat an upcoming crop of electric supercars.

Croatian firm Rimac claims its Concept Two will reach 258 mph, while the Japanese Aspark Owl boasts a claimed top speed of 248 mph. Running prototypes of both cars exist, but no customer cars have been built, and their manufacturers’ top-speed claims have not been independently verified. The second-generation Tesla Roadster has a claimed top speed of 250 mph, but the car hasn’t gone into production yet. The same goes for the Lotus Evija, which will surpass 200 mph, according to its maker.

The Bugatti Chiron remains the fastest car in the world, having achieved 304 mph in August 2019. A handful of other automakers are eyeing the 300-mph barrier, but with gasoline rather than electric power. While electric motors can produce absurd amounts of horsepower (of the cars listed above, the GXE is the least powerful), heavy battery packs put electric cars at a disadvantage when it comes to weight.

The GXE isn’t exactly a stripped-down track car, either. It comes with adaptive suspension, a 10-speaker JBL audio system, and 10.4-inch central touchscreen. Genovation plans to build a limited production run of 75 cars, with the first customer deliveries expected in 2020. The company previously quoted a price of $750,000, which could buy you 12 gasoline-powered 2020 Corvettes.

Source; Digital Trends– Stephen Edelstein


2020 Chevy Corvette Widebody Rendering Looks Seriously Sinister

The 2020 Chevy Corvette changed the game for the iconic model by putting the engine behind the passenger compartment for the first time. We’re still months away from the C8 Corvette entering public hands, but that hasn’t stopped HugoSilva Designs from imagining a new Corvette with a downright sinister widebody kit that does little to quell the Corvette’s already busy styling.

The trio of renderings shows a lowered and stanced Corvette with the wheels pushed to the corners and new sheet metal to cover them. At the front, there’s an aggressive lower front fascia that hovers inches above the ground. The new front fenders arch over the big wheels tucked underneath. The design probably increases engine and brake cooling.

At the rear, the tires receive new, wider fenders that enhance the car’s already pronounced hips. There appear to be additional vents at the back of the new fenders, likely aiding in cooling. The lower rear fascia is new, while the bumper has carbon fiber accents. The exhaust tips are unique; however, they do maintain the stock car exhaust’s general shape and design. Then there’s the massive rear wing completes the widebody kit. You can see hints of Lotus in the car’s design from certain angles, too, but it’s only a passing resemblance if you squint.

One aspect of the new Corvette that’s flown under the radar since its debut in July is the aftermarket scene. Tuners and the Corvette go back decades, and they’re not abandoning the mid-engine Corvette just because the engine moved. There will be body kits, intake and exhaust systems, and more for the car when it arrives, allowing customers to customize their ride further or increase its performance.

Right now, the automaker is preparing for the new model’s launch and is seeking new employees to help with it. Production for the Corvette is set to begin in February with customer deliveries following. General Motors missed its self-imposed deadline of beginning production by the end of the year due to the UAW contract strike that lasted six weeks.

Source: HugoSilva Designs via CarScoops