And there’s still more in the tank.
The Chevrolet Corvette Stingray C8 has been hailed as a performance bargain since it first arrived on the scene, but if you’re saving money on the cost of a car, that just means you have more money left over to make it even faster and better. For some, that can even include altering its appearance for a more exotic look. But while some prefer technical circuit racing, where the C8 excels too, the most popular form of motorsport in America is arguably drag racing. We know that a standard C8 with 495 horsepower and 470 lb-ft of torque can clock a 10-second quarter-mile, but now someone has made it into the nines.
Extreme Turbo Systems, a company famous for mind-blowingly powerful Nissan GTRs, has just set a new record for the C8, achieving a time of 9.95 seconds at 144 mph. Naturally, this required some extensive modifications, with the ETS C8 receiving new Mahle pistons Ferrea and valves, Mickey Thompson drag radial tires, a bespoke intercooler with an ice box, and direct port methanol injection. As imperative as these mods are, it’s the addition of Precision turbochargers with 46 millimeter wastegates that truly elevates the ETS C8 to a new level.
With 13 psi of boost, this Stingray produces 872 hp. 18 psi generates 980 horses, and then 20 psi gets the team into quadruple digits with an astonishing 1,021 hp. That’s more than double what the car comes with in stock form.
But as any racing enthusiast will tell you, a dyno run does not prove that your car is fast. Thus, ETS headed to Woodburn Dragstrip to lay down some rubber, and despite battling some launch control and transmission issues, achieved some incredible figures. At 11 psi, a time of 10.49 seconds was achieved at 141 mph. Turned up to 13.5 psi, the C8 managed 10.05 at 145 mph. Being that close to the single digits with no breakages, it only makes sense to turn it up again. Interestingly, although the team achieved 9.95 at 144 mph, this was done with just 15 psi, meaning less than 980 hp. Assuming that transmission and launch issues can be resolved and more power put down, this car may achieve mid-nine-second passes very soon.
We’ve been expecting to hear this news and finally today it has been confirmed by Chevrolet that the new 2020 Corvette Stingray will be the official Pace Car of the 104th Indianapolis 500. This marks the 17th race that Corvette has served as the official Pace Car, and the 31st Chevrolet to lead the field.
This year’s running of the Indy 500 will take place on Sunday, August 23 with the race being shown live on NBC.
With no fans allowed in attendance this year due to the COVID-19 pandemic, the official pace car driver will be GM President Mark Reuss.
“It’s truly an honor to have the opportunity to be behind the wheel of the mid-engine Corvette Pace Car at such a historic race as the Indy 500,” said GM President Mark Reuss. “The 2020 Corvette Stingray is the result of a close collaboration between the Corvette Racing and production engineering teams, setting a new benchmark for supercars around the world.”
The 2020 Corvette Stingray Pace Car is Torch Red and features the high Wing Spoiler and ground effects package. The Z51 Coupe will also wear the 104th Indy 500 livery on the doors. The new 2020 Stingray is capable of accelerating from 0-60 in 2.9 seconds and has a top speed of 194 mph, so it should have no trouble in setting the pace for the IndyCar racers.
“This is a continuation of our outstanding partnership with Chevrolet,” Indianapolis Motor Speedway President J. Douglas Boles said. “We’re so grateful for all that Chevrolet has contributed to the success of our events. The Torch Red 2020 Corvette Stingray is a world-class machine rich with speed, performance and excitement, perfectly suited to pace the ‘500′ field.”
Chevrolet has been linked to the Indianapolis Motor Speedway with both entities founded in 1911. Company founder and namesake Louis Chevrolet and his brothers Arthur and Gaston raced in the early 500-mile races with Gaston winning the race in 1920. Today, Louis Chevrolet rests in peace in a local Indianapolis cemetery just 15 minutes away from the track.
This afternoon we came across this Facebook post from Corvette Exterior Design Manager Kirk Bennion sharing these words from fellow GM designer Adam Barry who led the project. The 2020 Corvette Pace Car features a number of items from Genuine Corvette Accessories as discussed:
Indianapolis Motor Speedway
Many gearheads have a strange affinity to Hot Wheels. Here is everything you’ve ever wanted to know about the company, but never asked.
Toy cars can be divided into two categories: Hot Wheels and everybody else. For over 50 years, Mattel has dominated with what is now recognized as the best-selling toy in the world. It’s impossible to count how many car buffs, from mechanics to real race stars to TV personalities, grew up playing with these cars. Whether it was just a few models or massive collections, Hot Wheels has been part of car culture for decades and is never going to stop. Whether it’s a simple model or some fancy licensed vehicle, Hot Wheels simply enthralls.
Yet it’s incredible how some people are unaware of the facts of the company and its history. From its unique origins to how these cars are put together, the story behind Hot Wheels is fascinating. There are also touches from how some of these cars are more expensive than real ones to some unique touches on the culture. Here are 20 amazing facts about Hot Wheels to prove they’re more than just “kids toys.”‘
20/20 Real-Life Hot Wheels Jump Was A World Record
Growing up a massive Hot Wheels fan, racer Tanner Foust decided to honor them in a fun way. At the 2011 Indy 500, Foust talked the management into seeing up a massive orange ramp and raced down it in a rally car.
After 90 feet of track, Foust sailed 332 feet, the longest record for such a move. He topped it by driving through a 66-foot loop in 2012 to live out the dreams of every kid.
19 Technology In Car Building Is Amazing…
Making toys has become a very high-tech business today. Just like real car companies, Hot Wheels has adapted to the 21st century nicely. Computers and 3-D technology are utilized to make sure the designs are perfected before the building begins.
It also helps them keep on top of the latest car trends to ensure that today’s Hot Wheels are sleeker and more natural than the ones of the past.
18 But They’re Still Diecast
There are many toy car lines out there, but Hot Wheels is still the king of the bunch. The key reason is that, for all the advances in technology, every car is still diecast and built mostly by hand.
Even when cheaper materials are available, Mattel knows the diecast is what the fans want. It’s also helped in making customized cars at home for popular models. After 50 years, Mattel doesn’t want to mess with success and do away with diecast.
17 They’ve Worked With NASA
Hot Wheels have done a few astronaut-themed toys over the years. But that’s not the only connection they have with NASA. In 1998, they were able to work with the agency to create an exact replica of the Mars Rover, which landed on the Red Planet that very year.
They also worked with them in 2012 for scale models of the Curiosity rover. It’s amazing how the company got access to top-secret plans to make these toys.
16 Collectors Take It Seriously
Some may dismiss Hot Wheels as “just for kids.” But collectors take it more seriously than real automobiles. The 1969 Volkswagen Beach Bomb (only 16 prototypes were made) is known to go for at least $15,000.
Some rare models can go for a hundred grand, and collectors are always on the lookout for unique mint models. Entire museums are devoted to various cars as some Hot Wheels collections put legit car collectors to shame.
15 Scaling Down The Cars Was Tricky
A key to the company’s success is that they work with scores of real car companies to get looks at plans for their toy models. Yet it’s not so simple as just “make a smaller version.” The biggest challenge is to achieve the proper scale for the toys in a diecast model yet retain the details of the actual car.
That can be complex with some fancy vehicles. That every model has to be sized to fit the same tracks just adds to why it takes as long developing a toy car as a real one.
14 NASCAR Star Has The Record For The Longest Track
Ever since the Hot Wheels tracks were created, fans have been trying to top themselves making the most extended and most complex. A few have achieved great ones, but it’s fitting a NASCAR star holds the record for the longest.
In 2019, Joey Logano unveiled a 1,941-foot long track stretched across his garage. It weaves through his car collection with 1222 boosters before ending in Logano’s own 2018 HW Ford Mustang. Add yet another title to Logano’s list of accolades.
13 They Made A Car Coated In Diamonds
In 2008, Mattel made a big deal of celebrating the 40th anniversary of the Hot Wheels line. As a special reward, Mattel had Jasons of Beverly Hills craft the most expensive Hot Wheels car on the planet.
Cast in 18-karat gold, it’s covered with 2700 diamonds and gems totaling nearly $150,000 today. It’s become a rotating exhibit at toy museums for the glitziest Hot Wheels you could see.
12 The Darth Car Is A Speed Machine
While they do stick to toys, the company has been busy creating some real-sized cars for collectors. One of the most notable is based on Darth Vader, with the hood looking like his fearsome helmet and in jet black.
This isn’t just for show as it’s based on a C5 Corvette with a GM LS3 V-8 engine capable of 526 hp and 150 mph. The Dark Lord of the Sith would be proud of this powerful craft.
11 Every Car Is Tested To Make Sure It Can Run A Track
Almost from the beginning, Hot Wheels car fans had to have a track with the cars. They’ve gone from straight lines to elaborate roller-coaster-like loop systems to leave kids entertained for hours.
What few realize is that the track determines if a car makes it as Mattel prides itself on “every car can fit every track.” More than once, a prototype has to be altered when it won’t fit as the track decides a car’s final form.
10 There Are More Hot Wheels Cars Than Real Cars
While it’s tricky to figure out for sure, most sources agree there are at least one billion cars on the planet (give or take a few hundred thousand in auto graveyards). In contrast, since 1968, six billion Hot Wheels cars have been created.
True, many have been trashed and/or recycled, and it’s impossible to count how many have been lost in backyards. But given how 16 cars are produced every second, it’s no shock the toys outnumber the real deals.
9 Several Creators Are Legit Car Designers
The one constant of Hot Wheels is that the cars look just as good as the real deal. There’s an excellent reason for that as scores of the manufacturers are legitimate car designers. Larry Wood was a veteran of Ford before becoming one of the first Hot Wheels designers.
He’s not alone as Jack Ryan was a rocket designer who crafted the bearings that made the cars so great. Scores of the car designers were in real automobiles first, so it’s no wonder the vehicles look so good.
8 The Original Camaro Is Worth A Fortune
Mint conditions of the Original 16 Hot Wheels releases are all pretty collectible items. But one dominates from the pack. While versions of a Camaro were produced, a few had white enamel paint.
They had been meant to discover flaws in a prototype but accidentally released. A mint version of one went for a hundred thousand dollars and made this one of the most expensive toys on the planet
7 They Released A Custom Corvette Before GM Did
An early standout for the company at a custom Corvette in 1968. What made it notable was that the toy was released before GM had their actual Corvette in car dealerships.
The fact designer Harry Bradley had worked at GM indicates he may have “borrowed” the designs before he left to allow Mattel to beat GM to releasing a Corvette to the masses.
6 The Red Stripes Are Expensive
If you find what looks like an old Hot Wheels car, take a good look at the wheels. If they have red stripes, then you’ve just found a fantastic collector’s item. From 1968 to 1977, designers hand-painted red lines onto the wheels to make the cars look distinctive.
As a cost-cutting measure, they switched to all-black wheels in 1978. Some mint condition red-striped vehicles have been known to go for thousands online.
5 One Of The Original Cars Was Based On A Car With No Doors
The first wave of Hot Wheels was just 16 cars, and any of them can be valuable today. One is notable, the 1965 Dodge Deora. This car boasted no doors but rather a hatch for folks to crawl into.
It was based on a fun design used by Mike and Larry Alexander but in an irony, no real Dodge Deoras were built, to make this a truly unique model
4 A Tie-In Cartoon Got Pulled By The FCC
Today, cartoons based on toy lines are commonplace. But in 1969, Hot Wheels got in trouble when they put out a cartoon series about some teenage car drivers. Despite good messages, the show was hit by complaints about being a “half-hour commercial.”
The FCC agreed, and it was yanked off the air. The company was just ahead of their time with a cartoon tie-in for a hit toy line.
3 There’s A Fight On Where The Name Came From
Much of Hot Wheels is shrouded in myth, and that includes just where the name comes from. The familiar story is that when Eliot Handler saw the first models from designer Fred Adickes, he remarked: “those are some hot wheels you’ve got there.”
Another version is that Handler just blurted the name out in a meeting with a designer. Regardless, it just stuck to become one of the most popular toys on the planet.
2 They’re Number One…Because They Remain So Cheap
In the ranks of the most popular toys on the planet, Hot Wheels dominates. They’re not just the biggest toy vehicle sellers but also the number one selling toy in the entire world. The reason is that in many markets, the cars can still go for only a dollar each.
True, they can be put out in packs, and some nations charging a few bucks more. But many stores do sell the cars for less than a bottle of water, which is the reason they are so dominant.
1 Its Creator Was Married To Barbie’s Creator
Elliott and Ruth Handler were the First Couple of the toy world. The two had founded Mattel as a picture frame company in 1945. While making a dollhouse, Ruth decided to craft a series of dolls she named Barbie.
It was an instant hit to make Mattel a success. Elliott then realized how a toy car line could be great for boys to craft what would become Hot Wheels. The two remained together until Ruth’s death in 2002 (Elliott passed on nine years later) to be icons of their industry.
Sources: Mentalfloss.com, hotwheels.com, hotwheelsmedia.com, thrillist.com
Both cars retail for about $81,000, but one is a lot more accessible.
SPEED PHENOM ON YOUTUBE
If you’ve got $80,000 to spend and want an American high-performance car, now’s a pretty good time to be in the market. In addition to tire-shredding stalwarts like the Camaro ZL1 and Challenger Hellcat, Ford and Chevy have recently launched high-profile, track-ready sports cars. And thanks to a new video by Speed Phenom, we now know how they directly compare on track.
Naturally, we wanted to do this comparison ourselves. But the GT500 wasn’t ready during our Performance Car of the Year competition when we had an early C8 to test. And now that both cars are on sale, stay-at-home orders and track closures mean we’ll have to wait for an opportunity to do a full R&T comparison.
In the meantime, Speed Phenom does a good job of breaking down how they perform. With the caveat that he’s got a base model GT500 without the optional Pilot Sport Cup 2 tires, he notes that the car struggles for grip more often than the similarly-tired Corvette. It’s also less composed through mid-corner bumps, with slower cornering all around. Thanks to its massive horsepower advantage, though, it jets through straightaways.
The C8, meanwhile, benefits from serious mechanical grip. The better-balanced midship car fires through corners and has no problem putting its power down. That makes it more approachable, not surprising given that it’s the tamest version of the C8 while the GT500 is stretching the limits of the S550 platform. We’re sure to see more track-ready Corvettes soon, but for now the Stingray is a surprisingly capable start.
Mack Hogan- Road&Track
Even off the pavement, the new ‘Vette is a rocket ship.
The 2020 C8 Chevy Corvette is a fast car. In base form, it can hit a staggering 194 mph flat-out. Even with the drag-inducing Z51 performance package, the car can still do 184. Hennessey Performance took theirs to 182 mph with ease before they turbocharged it to oblivion. Now, there’s another C8 top-speed run on the internet, and this time, it takes place on a dry lake bed.
Popular YouTube TheStradman took his new Z51-equipped Corvette to a dry lake bed in Utah to test out the top speed of the car. He managed to hit an impressive 173 mph before slowing down—not bad considering the uneven and bumpy surface. It helps that there’s absolutely nothing for miles in either direction. In fact, from inside the cabin, it looks a bit uneventful. Here’s a perspective from outside the car to give you a sense of how fast 173 mph is:
If the base Corvette is this quick right out of the box, we’re curious to see how the upcoming Z06 stacks up. Considering the last-gen car could hit 200 mph, we’re expecting big things.
Source: Brian Silvestro; for RoadandTrack
The Goldilocks zone of Corvette C8 interiors?
By now, you should know that Chevrolet has started deliveries of the mid-engine 2020 Corvette. Lucky owners of the ‘Vette C8 are starting to receive their newest toy and most likely you’ve already seen one on the streets – that’s if the state you’re in is not affected by the coronavirus lockdown.
If you’re among those who are planning to purchase the new Corvette but are undecided with the trim level to choose, this video might be able to help you – especially if you’re particular with a car’s interior.
The Corvette C8 comes with three trim levels: 1LT, 2LT, and 3LT. The differences lie mainly in the features offered on each trim level, which defines that the cabin will look and feel like. That’s pretty important, considering that we spend so much time inside the car rather than staring at our investment from a distance. So, here’s a little guide.
The base 1LT trim isn’t really basic. With the entry-level trim, you already get the GT1 seats wrapped in mulan leather, a customizable 12-inch gauge cluster, push-button ignition and keyless entry, and an 8-inch Chevy MyLink infotainment system with Apple CarPlay and Android Auto, 4G LTE Wi-Fi, and 10-speaker Bose sound system. The Corvette 1LT trim is available in three color options: black, gray, or red.
Going up the 2LT trim gives you more interior color options plus features like a rearview camera mirror, a colored head-up display, heated/cooled seats, heated steering wheel, advanced blind-spot monitor, and rear cross-traffic warning. The infotainment gets upgraded as well with a wireless charger and a 14-speaker Boss audio system.
Finally, the 3LT trim dials up the ante by adding a premium Nappa leather with suede microfiber accents – all in combination with the GT2 seats that have more bolsters. These seem not a lot but the range-topping trim adds luxury to the sports coupe.
If you’re still undecided, watch the 2LT interior review on top of this page to check whether you need to take it down a notch to 1LT or go all out on the top-level 3LT.
Source: HorsePower Obsessed
The etiquette of doing something you do regularly while staying safe and clean.
- We might need new gas-pumping etiquette rules for the 21st century, both for selfish and altruistic reasons.
- We’ve known since 2011 that gas pump handles can be filthy—they’re worse than ATMs or escalators, even—but there’s no reason to worry if you take the right precautions.
- You can lower your risk by using gloves or paper towels to gas up, using touch-free pay options, and staying as physically separate from others as possible as you refuel.
You may have heard this one before: the best way to avoid catching some sort of communicable disease is to wash your hands well, and often. This advice isn’t exactly new, which hints at how reasonable and responsible it is.
Washing your hands to stay clean was the takeaway lesson from a 2011 study conducted by Kimberly-Clark Professional, which found gas pump handles were “the filthiest surface that Americans encounter on the way to work,” according to Reuters. The Los Angeles Times reported back then that the study found 71 percent of gas pump handles the Kimberly-Clark researched tested were considered “‘highly contaminated’ with the kinds of germs most associated with a high risk of illness.” Compare that to only 41 percent of ATM buttons and 43 percent of escalator rails.
The Kimberly-Clark Professional tests were done in big cities (Atlanta, Chicago, Dallas, Los Angeles, Miami, and Philadelphia) almost a decade ago, but when something like the coronavirus impacts pretty much every corner of the world, it’s a good reminder to take care when gassing up. When it comes to the COVID-19 coronavirus specifically, the National Institutes of Health has issued information that explains that coronavirus can be stable for 24 hours on some surfaces like cardboard and “up to two to three days on plastic and stainless steel.”
If you’re not already carrying disinfecting wipes in the car with you, this is a good time to start, assuming you have some available, and wipe off the pump handle and touchscreen, or any other surfaces you plan to touch, before your hands make contact. Even better, it might be a good idea to search out a station that accepts contactless payment at the pump, so you won’t need to come into physical contact with the touchscreen or anything else other than the pump handle. Two easy solutions to this issue are to either wear gloves or to use the paper towels commonly provided for window cleaning as a guard between your hands and the screen, buttons, and pump handle. Keeping gloves in the car is a good idea, but they shouldn’t be the disposable sterile gloves that hospitals can use when there’s a need for them there. If you don’t have gloves, keep some hand sanitizer in the car to use on your hands after filling up.
As for social distancing, it’s convenient that gas pumps are relatively far apart from one another, contagion-wise, but even so, choosing to fill up your tank at an off-peak time can be safer. If there are other people getting gas at the same time, keeping at least six feet between you and them is a good idea for everyone involved. And it should go without saying that you shouldn’t go into the store unless there’s a reasonable need to do so if there’s still a rapidly spreading disease going around.
The actual chance that you will catch a transmittable viruses at the gas station is low. As the Illinois TV station ABC-20 reported based on answers from a medical expert, the sequence of events that have to happen to get the virus from someone who has it (someone coughing onto the pump handle or touching the touchscreen with virus on their hands, and then you touching it and then your face) can be interrupted in any number of ways. Even so, there’s no harm in being extra careful in these potentially dangerous times.
Sebastian Blanco- Car and Driver
It took 30 hours for Hennessey Performance Engineering to tear apart a new 2020 Chevrolet Corvette, install twin-turbo setup, and put it back together.
It’s no surprise, then, that the twin-turbo C8 Corvette isn’t ready to be sold to customers. The engine lacks intercoolers and Hennessey hasn’t cracked the code of GM’s new electrical architecture to reprogram the ECU.
“This is just the beginning, our own car, doing R&D,” company founder and CEO John Hennessey told Motor Authority.
On Monday, the engine made 643 horsepower and 570 pound-feet of torque at the wheels on a Dynojet dyno while running just 5 psi of boost. That compares to baseline testing HPE performed on the stock car which revealed 466 hp and 451 lb-ft of torque. HPE plans to offer a 1,200-hp version of the C8, which Hennessey said could make 18-20 psi of boost.
Hennessey took delivery of an orange C8 Corvette in Detroit on March 13. He and his daughter, Emma, drove back to the performance outfitter’s Texas headquarters and performed baseline testing before the Hennessey team tore apart the car.
The orange C8 fired back to life on Friday with twin 62-mm Precision Turbos and twin blow-off valves connected to the throttle body mounted behind the catalytic converters. Both turbos are oil-cooled with twin scavenge pumps that feed back into the motor.
The system is not intercooled. Instead, there’s a methanol injection setup to keep things from getting too hot. HPE is considering where to put intercoolers. The current packaging has limited space for intercoolers without cutting into trunk space, which Hennessey does not want to do. 2020 Chevrolet Corvette Stingray undergoes twin-turbo conversion at Hennessey
Hennessey told Motor Authority his team currently can’t tune the factory ECU, but it is looking at aftermarket solutions for the engine management system. He noted it took a year for solutions to come to market for the C7 and added, “hopefully, it won’t take a year.”
Hennessey said when the turbocharged C8 was first started it didn’t throw any codes, errors, or a check engine light. “The computer seems happy with the turbos,” Hennessey noted. A check engine light did appear when the front wheel speed sensors were disconnected to put the car on the dyno, Hennessey said.
The orange C8 will used for R&D of upcoming modifications. Hennessey said he doesn’t expect to deliver modified customer C8s for at least six months, and all will have intercoolers and full plumbing.
Joel Feder for Motor Authority
Did you see the two race on YouTube? We’ve tested them, too; here’s why the results were no surprise.
- We have tested both the 2020 Chevrolet Corvette (11.2 seconds at 122 mph) and the 2020 Ford Mustang Shelby GT500 (11.4 seconds at 132 mph) in the quarter-mile.
- A video on YouTube, however, shows flipped results: 11.5 seconds at 120 mph for the Corvette and 10.8 seconds at 132 mph for the GT500.
- As always, the driver and track conditions are critical, and our two-run average is far more repeatable than any one-off run at a drag strip.
When we tested Ford’s new 2020 Mustang Shelby GT500 against the top-dog 2020 Chevrolet Camaro ZL1 1LE, the Mustang came out on top on the drag strip. But how does the front-engine Shelby stack up against the other, now mid-engine, threat from Chevy?
Greg PajoCar and Driver
During our testing, the GT500 hurtled through the quarter-mile in 11.4 seconds at 132 mph. But that was on a regular street-like surface, not a sticky, prepped drag strip. We struggled mightily with traction at launch, and our best run was with the launch control set to the lowest rpm allowed (1200 rpm) to prevent igniting a rear-tire fire. However, no surprise: with more traction far, better numbers are possible, and we’ve seen numbers below 11 seconds at drag strips, including this kid, who ran a 10.665 shortly after he acquired the car.’Murica Which Ultimate Pony Car Is the 1/4-Mile King?This Kid Ran a 10.66 Quarter Mile In His GT500
On the other hand, the 2020 Corvette has far fewer launch struggles, as it benefits from its newly acquired mid-engine layout and rear weight bias. Moving the weight distribution rearward improves launch traction, helping it jump off the line much quicker. During our testing, and despite far less horsepower, the mid-engine Vette outaccelerated the GT500 through the quarter-mile by two tenths of a second, reaching it in 11.2 seconds at 122 mph.Advertisement – Continue Reading Below
We’re starting to see other people’s numbers from both of these cars, though, as customers are starting to take deliveries of their C8 Corvettes and GT500s. Contrary to our test results, there’s a video circulating on YouTube that shows the new GT500 beating the C8 Corvette through the quarter-mile by seven-tenths of a second. It raced to the quarter-mile in 10.8 seconds while the Corvette reached it in 11.5 seconds.
Keep in mind that the driver and conditions are huge factors in quarter-mile and acceleration results. We suspect that here, the Corvette likely got bogged down on the high-grip surface, as the launch control isn’t optimized for those conditions, and the 760-hp Mustang benefited from the extra traction on the track.
Connor Hoffman for CarandDriver
Oh ZR1, how quickly we have forgotten you and moved on to the C8. But then comes along a video like this that reminds us that even with an engine upfront, you are still one of our favorites!
All kidding aside, the 2019 Corvette ZR1 is one of our favorite Corvettes of all time particularly because of the things it could do, like shooting down a former Space Shuttle runway at Cape Canaveral at nearly 200 MPH!
Typically we see these high speed runs with a ZR1 that has the ZTK’s High Wing. This Long Beach Red Corvette ZR1 has the low wing for less drag and it seems to definitely show off its speed in this standing mile run in which the Corvette reached a top speed of 191.16 MPH.
Two views are shown including the in-car with telemetry overlay on the screen. We see the car was still accelerating past the mile and we’re excited as they tell us that two more videos coming that show the ZR1 also running 2.3 miles and 2.7 miles down the runway.
The video comes the Johnny Bohmer Proving Grounds on Merritt Island Florida. Previously we have seen the Genovation GXE Electric Corvette run on the same track and in fact, it might be interesting to compare the two cars after the ZR1 shares the two final runs
From Johnny Bohmer Proving Grounds via YouTube:
As we continue to digest all the new information that came out of last week’s First Drive Event with the 2020 Corvette Stingrays in Las Vegas, there is a new “Mode” to discuss that most Corvette enthusiasts have never heard of.
The 2020 Corvette Stingray has several “modes” that help drivers get the most out of their cars. We are already familiar with the regular driving modes that feature settings for Weather, Touring, Sport and Track, as well as the two customizable modes called MyMode and Z-Mode. But what you may not be aware of is that the 2020 Corvette Stingray’s equipped with Magnetic Ride Control also features a “Flying Car” mode.
Well, it is the 21st century after all!
Corvette’s Vehicle Performance Manager Alex MacDonald is responsible for the chassis tuning of the new Corvette and he was tasked with explaining much of the on-track performance capabilities of the new Corvette to those at Spring Mountain last week.
For the C8 Corvette, engineers have rolled out version 4.0 of Magnetic Ride Control with the biggest change to the system is the use of accelerometers rather than position sensors that measured wheel height. Here is the slide that was offered on the new Mag Ride for the C8 Corvette:
The Magnetic Ride Control is tied into the Corvette’s Performance Traction Management system and that’s where the Flying Car Mode comes into play.
When your crest an incline and the Corvette’s wheels are off the ground, they will spin faster like they are on ice or another slippery surface because there is no resistance. The performance traction control senses that and sends commands to slow the wheels. But that’s not the best reaction when on the track. The system now senses when the car’s front wheels leave the ground (and assumes that the rears will be leaving as well), and the system tells the performance traction control to ignore it because it knows that it’s temporary and that all four wheels will be back on the ground momentarily.
Here is Alex talking about the Flying Car Mode:
“The other interesting note about MR is that it communicates with the performance traction system and it tells that performance traction system that if the front wheels have just gone over a big crest that we know that one wheel-base later the rear is about to go over that same crest, we can adapt the traction control to work in that situation and we call that Flying Car Mode, which is a cool name for it, because it does detect when the car is airborne and we can alter the chassis controls to deal what happens when the car lands.”
Video by Keith Cornett
There’s A New Engine In The C8.R Corvette, And It Sounds Nothing Like Its Predecessor.
They say beauty is in the eye of the beholder, and although that’s true, it can also be in the ear of the listener.
Since the Corvette first hit the streets back in the 1950s, it was imbued with the beautiful and nearly magical sound of V-8 performance. It was a deep, bass-filled rumble that just oozed a feeling of power. Over the years, the sound emanating from Corvettes, both on the street and at the track, had a distinctive note that became synonymous with the car. When the Corvette moved to the LS1 in 1997, the firing order was tweaked a bit, and although the sound did change, it still had that deep rumble that we all love.
But the only thing constant in the world is change. For the C8.R, Chevrolet Racing really changed things up with its new mid-engine marvel, but it wasn’t the engine placement that ended the car’s iconic sound signature. It was the engine itself. Gone is the deep baritone exhaust note, replaced instead with a high-pitched Ferrari-like sound. Think puberty in reverse. And although we love the sound of a wound-out Ferrari or other Italian supercars, having that pitch emanate from the back of a Corvette is something that will be hard to get used to. We’re not saying the sound is bad—it’s actually pretty badass—but it’s not even close to the sound signature we’ve come to associate with Corvettes.
The real culprit here isn’t the new 5.5L DOHC V-8 that Chevrolet moved to. Instead, it was the choice to go with a high-revving flat-plane crank. This drastically changed the firing order of the engine and eliminated the classic American V-8 sound that’s typical with the firing sequence of a traditional cross-plane crank. But we know what you’re thinking: “Well, this is just the race car, so I’m going to be able to get my V-8 rumble fix from the production car!” Well, yeah, for now. You see, for Chevrolet Racing to run this new DOHC flat-plane crank mill in the C8.R, it has to, according to the rules, run a similar engine in at least 300 production cars. So does this mean that an eventual C8 Z06 variant will lose its iconic exhaust note?
Nebraska native Curt Tomasevicz now has a silver medal for the 2014 Olympics — five years after the Olympic games.
Tomasevicz and the U.S. Men’s Bobsled team received their medals during a ceremony in Los Angeles Tuesday night.
The team’s bronze medals were upgraded after the Russian team was stripped of their gold medals for alleged doping.
Latvia’s team now has the gold.
“I think people felt bad we didn’t get the original experience but this time it was just celebrating our team – there was no one else on the podium. And it was great to do it on U.S. soil,” said Curt Tomasevicz.
The U.S. four-man team included Tomasevicz, Chris Fogt, Steve Langton and the late Steven Holcomb.
“Our pilot Steve Holcomb is no longer with us,” Tomasevicz said. “That’s the part that may bother me the most. Our podium moment has kind of been taken away from us. We didn’t get to celebrate together as a team and that’s just never going to happen now.”
Tomasevicz, the other two remaining members of the team, and Holcomb’s family are now using this opportunity to honor Holcomb.
“It’s really hard to explain whether it should be excitement or relief or what it is I guess, because he won’t be there to celebrate with us,” Tomasevicz said. “And I don’t know that we feel full justice has been served.”
While Tomasevicz and the team received their new medals on Tuesday night, they had to give the medals back after the ceremony. A grammatical error in the medal’s engraving must be fixed before the team receives their permanent medals.
Tomasevicz was also part of the 2010 Men’s Bobsled team that received gold in Vancouver.
He has retired from bobsledding and is an engineering professor at the University of Nebraska.
Original Source: 1011 Now
Late USA driver in two-man and four-man bobsleigh teams upgraded from bronze at Sochi 2014 after disqualification of Russian medallists
Two and a half years after his untimely death, the family of bobsleigh driver Steven Holcomb will receive two silver medals from Sochi 2014.
Holcomb piloted the USA two-man and four-man bob teams which finished third at the Games.
But they were promoted to silver in both events after Alexandr Zubkov, the driver of Russia’s original four-man and two-man gold medal sleds, was disqualified for doping offences with brakeman Alexey Voevoda also subsequently excluded.
Holcomb, who led his country to its first four-man title in 62 years at Vancouver 2010, died in his sleep at the Olympic training centre in Lake Placid in May 2017 aged 37.
Steven Langton, brakeman in the two-man and a pusher in the four-man, are also set to receive two silver medals at Tuesday’s Team USA Awards in Los Angeles with pushers Chris Fogt and Curt Tomasevicz collecting four-man silvers.
USA’s greatest bobsledder of his generation
A native of Park City, Utah, Holcomb started out as a ski racer before switching to sliding in his late teens.
He was originally a pusher and was part of Brian Shimer’s team ahead of the 2002 Games in his hometown of Salt Lake City before a hamstring injury at the worst time saw him replaced by Dan Steele.
Holcomb then switched to driving but there was a problem – his eyesight.
After laser surgery in 2000 had failed to make a difference, he was diagnosed with the incurable degenerative eye disease keratoconus which leads to the thinning of the cornea.
Deciding not to tell anyone, Holcomb wore hard contact lenses and ahead of Turin 2006 found that his sight was getting progressively worse to the point that he thought he could go blind.
In his autobiography, ‘But Now I See: My Journey From Blindness to Olympic Gold’, Holcomb admitted he should have said something sooner but that “because the only lengthy conversations I’d had about my disease had been with myself, I always came up with the most horrific scenarios for what would happen if I confessed now”.
Having managed to pass a vision test for international competition by memorising the letters on the eye chart, he took sixth place in the four-man bob and 14th in the two-man in his first Olympic Games.
But his eyesight soon deteriorated to the point that contact lenses were not up to the task making cornea transplants in both eyes, and four years out of the bob, the only feasible course of action.
Faced with that prospect, Holcomb’s already fragile mental health worsened and he attempted suicide by taking multiple sleeping pills washed down with bourbon whiskey.
Incredibly, he survived and decided to come clean about his sight issues.
His team-mates and coaches set to work and put him in touch with Calfornia doctor Brian Boxer Wachler who fitted special implants in 2008 which improved his vision markedly without surgery.
The procedure soon became known as the Holcomb C3-R.
Holcomb was able to return to the circuit and became world champion a year later at Lake Placid before securing his greatest triumph at the Vancouver Games of 2010, piloting the ‘Night Train’ – with pushers Tomasevicz, Justin Olsen and Steve Mesler – to gold.
Popular with his team-mates and bobsleigh crowds for his outgoing manner, and his ‘Holcy Shuffle’ dance, Holcomb built on his Olympic title with three golds at the 2012 Lake Placid World Championships – two-man, four-man and mixed team.
USA retained that mixed team title a year later before Holcomb headed to Sochi for his third Games.
Bronze medals in both the four-man and two-man saw Holcomb join Pat Martin as his nation’s most decorated Olympic bobsledder.
The next couple of seasons were not quite as successful, although Holcomb was ranked second in the 2016-17 two-man World Cup standings thanks in part to a victory over Canada’s subsequent PyeongChang 2018 two-man gold medallist Justin Kripps at Lake Placid.
He was still on course to pilot a Team USA sled at PyeongChang but in May 2017 his best friend, world champion skeleton racer Katie Uhlaender, broke into his room at the training centre in Lake Placid having not heard from him for two days and discovered his body.
Holcomb was later found to have alcohol and prescription sleeping tablets in his system having appeared to have passed away in his sleep.
His 60 World Cup, 10 World Championship and three Olympic medals made him one of the most decorated drivers in the sport’s history.
Medal reallocation from Sochi 2014
Six months after Holcomb’s death, Zubkov was stripped of his medals from Sochi 2014 for doping offences.
And in March this year, following the application of the Olympic Medal Reallocation Principles, the teams below Russia were promoted with Holcomb’s two-man and four-man teams upgraded to silver.
Langton, Tomasevicz and Fogt released a statement at the time saying, “It’s unfortunate that our results were not official in February of 2014 and that we’ve had to endure the long process to see justice finally served.
“We are happy that we now can celebrate and be proud of the silver medal accomplishments.”
Latvia’s four-man team, piloted by Oskars Melbardis, were upgraded to the nation’s first ever Winter Olympic gold medal with John Jackson’s Great Britain sled promoted from fifth to third with Russia 2 also disqualified for doping having been originally fourth.
Jackson said, “Disappointingly, it is a medal we should have received on an Olympic podium in 2014. Cheats have cost us that moment, along with other nations too.”
In the two-man, Switzerland’s Beat Hefti and Alex Baumann were awarded gold with Melbardis and Daumants Dreiskens taking bronze after Russia 2 were also excluded for doping.
U.S. bobsledder Steven Holcomb is getting one last victory celebration.
A long overdue one.
More than 2 1/2 years after his death — and almost six years removed from the bobsled races in question — Holcomb and his team are about to finally be presented the silver medals that they should have received at the 2014 Sochi Olympics. Holcomb and teammates Steven Langton, Chris Fogt and Curt Tomasevicz were originally awarded bronze medals, which were eventually upgraded after a long probe of the Russian doping scandal that now overshadows those games.
The medal reallocation will take place at the Team USA Awards in Los Angeles. Langton, Fogt and Tomasevicz are all expected to attend, as is longtime U.S. bobsled coach Brian Shimer and other top American sliding officials. Holcomb, who was 37 when he died in his sleep at the Olympic Training Center in Lake Placid, New York in May 2017, will be represented by his family.
“I think the word that comes to mind most quickly is bittersweet,” said Jean Schaefer, Holcomb’s mother. “It’s certainly a great honor for Steven and I’m so very, very proud of him — as I have been so very proud of him his whole life. But there’s also a great sadness that he’s not here to enjoy the fruits of his efforts and to celebrate with his team.”
It took years to get to this point: Russia, which won the two- and four-man bobsled races at the 2014 Games on its home ice, was stripped of those titles in November 2017 after the long investigation into the state-sponsored doping program at that Olympics.
But it took the International Olympic Committee until this past March to formally reallocate the medals. Latvia was upgraded to gold in four-man, with Britain moving up to bronze. In two-man, Switzerland eventually was elevated to gold, with Latvia up to bronze.
The U.S., which left Sochi with bronzes from both races, is now recognized as the silver medalist in both. Holcomb and Langton were in the two-man sled; Holcomb drove Langton, Fogt and Tomasevicz in the four-man race.
“Holcomb made such an impact on so many people’s lives,” said Kaillie Humphries, the longtime Canadian bobsledder and two-time Olympic women’s champion who is now competing for the U.S. “He was the best.”
Holcomb, who had prescription sleeping pills and alcohol in his system on the night that he died and was so depressed by failing eyesight in 2007 that he attempted suicide, was by far the best bobsledder in the U.S. program — perhaps ever. He was a winner of at least 60 World Cup medals, more than a dozen World Cup championship trophies and the various awards from his career are scattered about the homes of his relatives.
His mother’s intention for the silver medals is that they be donated to the U.S. Olympic and Paralympic Committee archives. The USOPC was in possession of Holcomb’s bronze medals, as a gift from his family, when they had to be surrendered to the IOC in order to receive the new silvers.
“Steven once told me that his medals weren’t just medals for him or his team,” Schaefer said. “They were medals for his country. They represented America and he was very proud of that and I think he would be very proud to know that his medals reside where people can see them and enjoy them.”
Holcomb would have been a lock for the 2018 U.S. Olympic Team as well, where he could have added to his medal haul — he drove the U.S. to gold in the four-man race at the 2010 Vancouver Games, ending a 62-year drought for the Americans in bobsledding’s signature race.
His mother went to Pyeongchang last year instead, representing her son and his memory. The grieving process is not over, though Tuesday’s event is certain to bring back happy thoughts as well.
“I’m as OK as I can be,” Schaefer said. “I don’t know if a parent ever gets over the loss of a child, because it’s certainly not the natural order of things. And I have to say that the support of his teammates and the Olympic family is incredible. Just incredible. You feel the love all the time.”
She will feel it again Tuesday, one more time.